daewoo puma used for sale

: neu : ca. 8 Wochen ab Auftragse : Spanien : 17800 € : 341.76 € : 80 to : 510 mm : 40x14 mm : 40 1/min : 9 kW : 1700 mm : 1300 mm : 2050 mm : 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24200 € : 464.64 € : 80 to : 750 mm : 40x14 mm : 40 1/min : 9 kW : 1700 mm : 1300 mm : 2050 mm : 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. №: 4222 Portion cutting machine for meat with/without bone, bacon, ham, diary products, fish, vegetables Cutting chamber size (LxWxH): 700 x 220 x 240 mm Cut-off length: 0-70 mm Machine width: 90,0 cm Machine length: 200,0 cm Machine height: 145,0 cm Motor power: 3,4 kW Operating voltage: 380 V, 50 Hz

This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details.

This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2011. This DOOSAN Puma 2600L features a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It includes a robust spindle speed of up to 2,800 RPM and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600L machine we have for sale. Contact us for further details.

This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2006. This DOOSAN Puma 240 MB features driven tools and is equipped with a Fanuc 0iTC control unit. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 240 MB machine we have for sale. Contact us for further details.

CNC turning center Type: Puma MX 1600 ST Manufacturer: Doosan Year: 2015 Highly productive multifunctional CNC turning-milling center designed for complete machining of parts in one clamping. The machine is equipped with a 16-position turret, milling spindle with 40-position Capto C5 tool magazine, counter spindle Y-axis and B-axis. The equipment includes Grundfos 25 bar high-pressure cooling Renishaw tool probe CNC Spacesaver 2500 bar feeder Sung Woo MX1600 chip conveyor Belt oil separator and belt workpiece ejector. Both the main and counter spindles have continuously adjustable clamping force and the possibility of using a hydraulic chuck or collet clamping Control: FANUC Series 31i Model A Hours: 17662 Max machining diameter: 330 mm Max machining length: 900 mm Main spindle: 6" chuck Speed ​​up to 6,000 rpm Bar passage 51 mm Y-axis: ± 85 mm B-axis: ± 120° ...

CNC turning center Type: Puma MX 1600 ST Manufacturer: Doosan Year: 2014 Highly productive multifunctional CNC turning-milling center designed for complete machining of parts in one clamping. The machine is equipped with a 16-position turret, milling spindle with 40-position Capto C5 tool magazine, counter spindle Y-axis and B-axis. The equipment includes Grundfos 25 bar high-pressure cooling Renishaw tool probe CNC Spacesaver 2500 bar feeder Sung Woo MX1600 chip conveyor Belt oil separator and belt workpiece ejector. Both the main and counter spindles have continuously adjustable clamping force and the possibility of using a hydraulic chuck or collet clamping Control: FANUC Series 31i Model A Hours: 32371 Max machining diameter: 330 mm Max machining length: 900 mm Main spindle: 6" chuck Speed ​​up to 6,000 rpm Bar passage 51 mm Y-axis: ± 85 mm B-axis: ± 120° ...

- Part catcher - Cromar chip conveyor - Tool eye probe - CROMAR Chip conveyor - Samchully Chuck 380 mm - 5 BMT Tool holders

- Tool eye - SMW 3 chuck 630-165 mm - SMW Steady rest 85 - 350 mm - LNS Chip conveyor - DORMATEC Air Filter 30 m3

The machine is in good technical condition; testing is possible by prior arrangement. 400 operating hours; condition comparable to a new machine. The lathe comes with accessories and is ready for immediate operation. Equipment: driven tools, chip conveyor, 20-bar high-pressure pump, 250mm hydraulic chuck, 12-station turret, modern FANUC i-Series CNC control, sets of soft jaws, bar feeder, regular maintenance history, and documentation.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 15600 € : 299.52 € : 55 to : 750 mm : 40x10 mm : 37 1/min : 5 kW : 1930 mm : 1200 mm : 1800 mm : 1885 kg hydr. drive Support table with stop Operating instructions in GERMAN and ENGLISH CNC options on request We have an extensive stock of punches and dies at your immediate disposal. WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fanuc 18i-T, live tooling, sub-spindle Max turning diameter: 390 mm Recommended turning diameter: 170 mm Max bar capacity: 65 mm X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° Chuck size: 210 mm Spindle nose: ASA A2-6 Spindle bore: 76 mm Spindle motor power: 15/11 kW Rapid traverse X/Z: 20/25 m/min Turret positions: 12 Bar capacity: 65 mm Coolant pump motor: 0.24 kW Electrical requirement: 25 kVA Machine height: 1740 mm Machine weight: 4240 kg Control system: FANUC FS18T-C / FS16T-C Auction-ID: A7-48385-27

AC power supply 220 V, 3PH, 50/60 Hz; control voltage AC 110 V / DC 24 V; rated current 75 A; installed power 35 kVA; spindle speed up to 6000 rpm; ASA A2#5 spindle nose; 53 mm spindle passage; 12-tool VDI turret; Tool dimensions 25 x 25 mm; boring bar Ø 40 mm; strokes X 242 mm / Z 440 mm; fast feeds X 20 m/min, Z 25 m/min; 11 kW spindle motor; X-axis motors 1.4 kW / Z axis 2.8 kW; lubricating tank capacity 100 L; Max turning Ø 350 mm; Max turning length 425 mm Auction-ID: A1-48609-12

Knives for A750 - TREIF PUMA S Article number Treif - 58114 / 846000 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Manufacturer: TREIF Type: PUMA CE 700 EB Product holder with 45 catchers / teeth / for PUMA CE 700 EB, Art. No. 124777 Dimensions: L 180 x W 185 mm Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

3 pieces Teflon knife for slicer TREIF type PUMA CE 700 EB Article number Treif : 244755 = 83581 - ID 16391, 12153,11695 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Load sensing for hydraulics Predisposed for a GPS Air co 4 Rear double acting valves 1 Front double-acting dispenser Rear linkage 10 ton 2 Ball Holder Note support of a broken trumpet claxon The brakes are almost new less than 400h Tie . piton . k80 . and bleachers 285 horsepower 50km h Air brake Suspended cabin Auction-ID: A3-46077-35165

Maximum bar passage 81 mm 10-place tool turret Machinery ready for loading, organization by the buyer It is possible to request to use the team provided by Surplex, amount to be defined Auction-ID: A7-48409-1

C-axis 12-place motorized tool turret Machinery ready for loading, organization by the buyer It is possible to request to use the team provided by Surplex, amount to be defined Auction-ID: A7-48409-2

Equipped with: front linkage, 3x double-acting rear hydraulic valves, 1x double-acting front valve, beacon, rear work light, Load sensing, K80 drawbar, brake connection, PTO speed: 540/540e/1000 Auction-ID: A1-47378-16

Featured; Digital counters and controls; Skylight; Air suspension seat; Front linkage ; Steering on the fenders; Extra seat; Various work lights (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47378-29

Equipped with: Case IH Puma 185 CVX EP, year 2014, equipped with a stepless CVX (CVT) transmission and delivers a maximum power of approximately 185 hp, the hydraulic system has a capacity of approx. 150 l/min and has several electronic rear spool valves, CVX stepless (CVT), PTO: 540 / 540E / 1000 rpm, hydraulic capacity: approx. 150 l/min, number of hydraulic valves: approx. 4 rear, fuel tank: approx. 390–400Ltr, wheelbase: approx. 2.9 meters, cab with standard roof and working lights, joystick control, power Beyond connection, tow bar / trailer brake, automatic stabilizers, radio with Bluetooth, BKT ride max tires, 4WD and HD rear axle, front linkage, front 7 pin plug, paddleboard control lift and PTO, Auction-ID: A1-47379-15

Power: 9 kW Working parameters: 110 t – Gooseneck 500 mm – Adjustable stroke 0 to 60 mm – Cadence 37 rpm (stroke 20 mm) Steel capacity 45 kg/mm²: Ø 40 × 14 mm – Ø 28 × 16 mm Equipment included: 20 sets of punches and dies Ø 8 to 27 mm – Semi-paxy stop capacity 1000 – Fagor numerical control Power supply: Pump 28 l/min – 230 bar Year & Manufacturer: 2007 – GEKA Dimensions (mm): 1300 × 1300 × 1850 Weight (kg): 1715 Remarks: Serial No. 10138 1955 included in the description. Auction-ID: A1-48608-17

Hours posted: • Total parts: ~304.891 • CN hours: ~38.237 h • Pump hours: ~30,291 h Counters (seller data): • Turret: power-up 33,143 h / operation 6,466 h / working 1,926 h • Milling: power on 33,143 h / operation 7,480 h / work 3,165 h Tools provided • Original cardboard tools • Original mandrels (see photos) • Jaw sets and accessories Exclusions • Mounted tooling and mandrels not included • Fog suction not included • Tool-free attachments Conditions • Available from 11/05/2026 • Truck loading included Machine Doosan PUMA MX2500ST turn-mill centre with Fanuc 18i-T CN, 24-tool Capto C6 magazine and BMT65P 12-station driven turret. Spindle: 26 kW, 3,500 rpm. Dimensions: 5,500 × 2,565 × 2,600 mm – ~15,000 kg – 400V. Machine that produced ~304,891 pieces. Sustained in ...

Treif Maschinenbau GmbH slicer, model: Puma CE 1100 EB, machine number: 195309.61827.100243, year of construction: 2005, 230/400 V, 3 Ph, 50 Hz, 8.2/16 A, 3.4 kW, weight: 325 kg, maximum product size: 1100 mm x 220 mm x 240 mm, total dimensions: 3170 mm x 900 mm x 1440 mm. Missing knife.

Hours posted: • Total parts: ~304.891 • CN hours: ~38.237 h • Pump hours: ~30,291 h Counters (seller data): • Turret: power-up 33,143 h / operation 6,466 h / working 1,926 h • Milling: power on 33,143 h / operation 7,480 h / work 3,165 h Tools provided • Original cardboard tools • Original mandrels (see photos) • Jaw sets and accessories Exclusions • Mounted tooling and mandrels not included • Fog suction not included • Tool-free attachments Conditions • Available from 11/05/2026 • Truck loading included Machine Doosan PUMA MX2500ST turn-mill centre with Fanuc 18i-T CN, 24-tool Capto C6 magazine and BMT65P 12-station driven turret. Spindle: 26 kW, 3,500 rpm. Dimensions: 5,500 × 2,565 × 2,600 mm – ~15,000 kg – 400V. Machine that produced ~304,891 pieces. Sustained in ...

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W

drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;

50/60Hz; core drill dia 35mm; twist drill dia 13mm; stroke 210mm; cable length 2.5M; 7750

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

With a drilling capacity of 35 mm, a power of 1600 kW and an adhesive force of 16000 N, you can drill with precision in steel workpieces. Drilling depth 210 mm - speed up to 830 rpm - automatic cooling system, without overheating. A magnetic drilling machine works by activating an electromagnet that clamps the machine firmly to the metal workpiece. This provides additional stability during drilling, allowing for precision drilling without the machine shifting. In a decent case and unused in a box.

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

equipped with automatic cooling system; unused; in suitcase; 5637

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support