We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,832 used machines on RESALE, but how to find them? Machine Search
used
Key data: 400 mm, 760 mm
Machine Details Stock-No. 1105-03941 Type of machine CNC Turning- and Milling Center Make DOOSAN daewoo Type PUMA 2100 lm Year of manufacture 2012 Type of control CNC Storage location FRANCE Country of origin Korea Delivery time by arrangement Freight basis ex. location Price Technical details turning diameter 406 mm turning length 830 mm control FANUC Travel -X Axis 260 mm Travel -Z Axis 830 mm Rapid Travel - Longitudinal/Face 24 m/min C-axis 20 min-¹ Spindle Bore Diameter 76 mm spindle drive 18.5 kW Milling Spindle Motor 7.5 kW Spindle Speed: 4500 min-¹ Number tool positions lower turret 12 Stations which are driven 12 total power requirement ca 40 kVA Weight of the machine approx. 7000 kg dimensions of the machine approx. 3.5 x 2.3 x 2.2 m Additional information PUMA 2100 LM - Control FANUC - Spindle bore 76 - SPINDLE 1 CHUCK 25 MM 18.5 KW 4500 RP ...
used
Machine Details Warehouse number 1105-03648 Machine type CNC lathe - inclined bed machine Make DOOSAN DAEWOO Type PUMA 200 M Year of construction 1999 Control type CNC Control FANUC O T Storage location FRANCE Country of origin KOREA Delivery time by arrangement Freight base from location Price Technical details Turning diameter 290 mm Turning length 600 mm Control FANUC O T Bore diameter 66 mm Spindle speed 45-4500 rpm Revolver 12 COMPARTMENT Pinole diameter 80 mm Spindle head ASA - A 2 - 6 front bearing diameter 90 mm Tailstock pinole diameter 80 mm Centering bore mt - 5 Pinole travel 100 mm Axialkraf 12 , 5 - 500 kgf Sauter tool system driven tools 6 Number of tools max. 12 Total power requirement 36 kVA Machine weight approx. 4.2 t Information Equipment and accessories: Chip conveyor, C-axis, 12x star turret with AGW. TOOLS AND C AXIS FANUC O T ...
used
DAEWOO PUMA 8S cnc lathe the machine is of USA origin therefore 220 three-phase it was tested after unloading for 5 years, with a transformer that I no longer own, it was working, new spindle never installed
used
Daewoo Puma 15 2-axis lathe (700x1500) Self-centering is an autoblock dia. 500
used
Machine Details Stock-No. 1105-03878 Type of machine CNC Lathe - Inclined Bed Type Make DOOSAN DAEWOO Type PUMA 240 M Year of manufacture 2010 Type of control CNC Storage location FRANCE HAGUENAU Country of origin KORREA Delivery time Immediatly Freight basis Ex site Technical details turning diameter 510 mm turning length 500 mm control FANUC 21 TB swing diameter over bed slide 390 mm spindle turning speed - stepless 4500 rpm Spindle Bore 65 mm power capacity 15 kW total power requirement 27 kW Weight of the machine approx. 4.5 t dimensions of the machine approx. 3.7 x 1.6 x 1.7 m Accessories 12 - tool turret Powered Tooling C - axis 0.001° part catcher with ejector 3-Jaw Chuck Additional information CNC FANUC 21 WITH C AXIS LIVE TOOLS CHUCK TAILSTOK AND CHIP CONVOYER
used
Used Daewoo Puma 230 MS cnc lathe Year 2003 IEMCA Bar loader Visible in Italy CE
used
Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool ...
used
HORIZONTAL LATHE DAEWOO PUMA TT1800SY :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iTB - Main Spindle Nose: ASA 6 - Main Spindle Power: 22.4Kw Main spindle bar clearance: 65mm - Turning diameter: 230mm - Turning length: 980mm - Main spindle speed: 5000 Number of Tool Turrets: 2 Number of first turret tool slots: 12 Number of first turret motors: 12 First Turret X-Axis Travel: 165mm First Turret Y-Axis Travel: +- 50mm First Turret Z-Axis Travel: 700mm Second Turret X-Axis Travel: 190mm Second Turret Z-Axis Travel: 720mm Sub-spindle: yes Spindle nose: ASA 6 Sub-spindle speed: 5000 Power against spindle: 22Kw Bar feeder model and brand: Iemca Master 880 HD UP/R Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 3905mm Width: 2050mm Height: 2050mm Weight: 8800Kg
used
DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy
used
Fanuc CNC model Version of the CNC 18i - T Main spindle nose ASA 8 Main spindle power 15 Kw Turning diameter 350 mm Turning length 536 mm Main spindle rpm 3500 Number of tool holder turrets 1 Number of tool places first turret 12 Number of fixed tool places first turret 12 First turret X-axis travel 220 mm Z axis travel first turret 580 mm Linear axis rapid feeds X Y Z 30 m/min Counter spindle yes Number of counter spindle revolutions 6000 Bar passage 90 mm Counter spindle Z stroke 500 mm
used
Center height: 0 mm Center distance: 770 mm Spindle bore: 77 mm Make Puma 10 S CNC Type DAEWOO PUMA 10 S Year 90 er FANUC O - T daewoo puma cnc lathe draaibank Centre height (mm) Swing = 580 Center distance (mm) DBC = 770 Spindle boreBore = 77 Turret 10 Positions Speeds 2500 Rpm Rapid 10.000 mm/Min
used
Turning diameter: 700 mm Turning length: 1105 mm Turret positions: 12 CNC Brand: Fanuc DAEWOO - PUMA 350 CNC Lathe Ø 480 x 1050 mm MACH - ID 6305 Make: DAEWOO Type: PUMA 350 Control: FANUC YOP: 1998 Max. turning Ø 700 mm X-Axis 362 mm Z-Axis 1.105 mm Spindle bore 91 mm Speedrange 3500 Rpm Spindle power 26 kW ATC / revolver 12 Control Fanuc 18iT Chip conveyor Yes Pinole taperMk 6 Mk Stroke pinole 120 mm Dimensions Length 4.000 mm Width 2.400 mm Height 2.300 mm Weight 8.200 kg
used
Key data: 390 mm, 800 mm
For sale: Daewoo Puma CNC turning center type TT2500SY with a Fanuc 18iTB controller. This is a CNC lathe with 2 spindles with a full C-axis, 2 turrets (BMT-65) with 12 positions (with intermediate positions) and a Y-axis on the top turret. All (driven) tool holders, including 2 driven holders in the angle, as well as a complete set of collets etc. are included with the machine. The machine also includes a 250 mm chuck for the main spindle.
used
DAEWOO MARINE ENGINE V180 TI + GEARBOX 1800 RPM 600 HP
used
DAEWOO/DOOSAN MARINE ENGINE V 158 TI V type, direct- injection, water cooled with wet turbo charger & inter-cooler
Key data: 900 Fanuc, 1650 18i-T
Turning diameter: 900 mm Turning length: 1650 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:900mm X-Axis: 470mm Z-Axis: 1.650mm Speedrange: 1-800 Rpm Spindle power: 45kW ATC / revolver:12 Control: Fanuc 18i-T Chip conveyor: Yes Length: 5.030 mm Width: 2.300 mm Height: 2.800 mm Weight: 16.100 kg Tailstock Renishaw HPA Tool Setting Arm Filtermist FX 7002 Mist Extraction Unit & Foot Switches
used
Turning diameter: 510 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18 T MACH-id 4139 MAKE DAEWOO - Korea TYPE PUMA 200 LMA YEAR 09.1999 SPECIFICATIONS Swing over bed Ø 510 mm Control FANUC 18 T Swing over cross slide 330 mm Distance between centres 550 mm Spindle bore 46 mm Spindle speeds / ranges 6000 Rpm Power 11 Kw DIMENSIONS Length 2660 mm Width 1700 mm Height 2000 mm Chip conveyotr Coolant system Large tooling package
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-TB Technical data Number of axis total: 3 Number of spindles: 1 Number of revolvers: 1 Swing in gap: 330 mm Swing diameter over bed: 510 mm Max. turning diameter: 350 mm Maximum turning length: 400 mm Turret carriage: Longitudinal travel (Z-axis): 440 mm Transversal strocke (X axis): 242 mm Rapid traverse Z: 25 m/min Rapid traverse X: 20 m/min Turret slide: Number of positions: 12 Tool shank cross section: 25 mm Main spindle: Inner taper type: A2-6 Collet bore: 62 mm Spindle speeds: stepless from: 50 rpm up to: 5000 rpm Tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Spindle motor: 11/15 kW Voltage 50 Hz 3x: 400 Volt Total power required: 35 kVA Machine´s weight about: 3940 kg Overall dim ...
used
centro di lavoro verticale 2 pallet, DAEWOO ACE VC500, SPECIFICHE TECNICHE, Modello CNC Fanuc, Versione del CNC 18-M, Attacco utensile iso 40, Potenza mandrino 15 Kw, Numero Giri mandrino 10000, Numero utensili 30, Corsa Asse X 760 mm, Corsa Asse Y 510 mm, Corsa Asse Z 570 mm, Cambio pallet si, Dimensione pallet 860x560 mm, Carico massimo consentito 300 Kg, Rotopallet si, Alta pressione refrigerante si, Evacuatore truciolo a tappeto, Marca Daewoo, Modello ACE VC500, Anno costruzione 2000, DIMENSIONI E PESO, Lunghezza 3600 mm, Larghezza 3700 mm, Altezza 2935 mm, Peso 9200 Kg, The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with sever ...
used
Turning diameter: 510 mm Turning length: 400 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18 T MAKE` Daewoo Korea TYPE PUMA 200 C YEAR 11.1998 SPECIFICATIONS Swing over bed Ø 510 mm Control Fanuc 18 T Swing over cross slide 330 mm Distance between centres 400 mm Spindle bore 76 mm Spindle speeds / ranges 4500 Rpm Power 15 Kw DIMENSIONS Length 2660 mm Width 1635 mm Height 2000 mm
used
Table length: 7000 mm Table width: 1200 mm Longitudinal X: 7000 mm Cross Y: 2000 mm Vertical Z: 600 mm CNC Brand: Fanuc CNC Model: 16 iMB Make HNK Daewoo Type HKDB 130 P Year 2000 Fanuc 16 iMB Spindle diameter (mm) 130/26/2500 Table length (mm) L = 7.000 Table width (mm) W = 1.200 Longitudinal X (mm) X = 7.000 Cross Y (mm) Y = 2.000 Pos ATC Z = 600 Number APC. Duplex borer 2 x Chain ATC 60 Pos. 2 x pallet 7000 x 1200 2 x chip conveyor
used
Turning diameter: 580 mm Turning length: 100 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: Fanuc CNC Model: O T Make Daewoo 315 L Type 315 L ECOTURN Year1995 Fanuc OT CNC turning lathe daewoo ecoturn 315 L Centre height (mm)Swing = 580 Center distance (mm)DBC = 1.000 Spindle bore Turret = 10 Pos Chip conveyor Kitagawa 315 mm
used
used
FLOOR SCRUB CLEANING machine DAEWOO DAFL50A NEW, NEVER USED, YOM 2022 COMPLETED BY EL. BATTERY AND CHARGER NETTO WEIGHT 160 KG TWO AVAILABLE LOCATION - POLAND WE HAVE ADDITIONAL TWO SIMILAR CLEANING MACHINES KREMER KR-FL50A IN NEW CONDITION AND THE SAME PRICE.
new
connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Power: 7,5 KW Receiver: 500 L feed pressure: 14 bar liter capacity: 995 l connected load frequency: 400 V weight of the machine ca.: 200 kg dimensions of the machine ca.: 2,0 x 0,7 x ,125 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
rated capacity: 8,1 kVA voltage: 400 / 230 V frequency: 50 Hz tank capacity: 15 l engine output: 11 / 15 KW / PS weight of the machine ca.: 0,165 t dimensions of the machine ca.: 0,88 x 0,56 x 0,76 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine Details Warehouse number 1105-03706 Machine type CNC lathe Make DOOSAN DAEWOO Type LYNX 210 Year of construction 2004 Control type CNC Control Fanuc 21-T Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from location Technical details Turning diameter 460 mm Turning length 300 mm Control Fanuc 21-T Turning diameter over bed 460 mm Turning diameter above the face carriage 280 mm Travel - x 160 mm Travel - z 330 mm Center width 335 mm Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Speed range - main spindle 42 - 4,000 rpm Spindle nose A2-6 Spindle passage 51 mm Spindle bore 65 mm Spindle cone 1/20 Drive power - main spindle 7.5 kW Tool slots upper turret 10 . Shaft diameter 32 (round) mm Shaft diameter 20 (square) mm Pipe diameter max. 50 mm Chuck diameter 200 mm Coolant tank 87 l Total power ...
used
Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER
used
Electric scrubber drier, floor cleaning machine DEAWOO type DAFL50A Fabr. No. 22DW01702ALE01-00028 Year of construction 2022 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume Pure water: 50 litres Tank volume Waste water: 50 litres Noise pollution 66 dBa Climbing capacity 2% Battery voltage 24 Volt, 100 AH - Battery charger 24 Volt- Battery 24 Volt , 100 AH - one cleaning brush - two separate tanks - without drive, the device is pushed by hand Dimensions L x W x H 1275 x 850 x 1350 mm Empty weight 160 kg very good condition, as good as new; used
new
Brand Daewoo Model: DDAE10500DSE-3G Year of construction: 2022, New Capacitance (KvA) 8.1 kVa (230v) / 7.5 kVa (400v) Engine brand Daewoo Engine model 500 Motor capacity (Kw) 15 Hp Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Dimensions LxWxH (mm) 880 x 560 x 720 Weight (Kg) ca 165 Number of stucco in stock 100+ Comments Max power: 8.1 kVA (400 V) 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) 6.7 kVA (230 V) Engine Power: 15hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7M: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720
new
rated capacity: max. 8,1 kVA capacity in kVA: bei 400 V - 7,5 kVA rated capacity: bei 230 V - 6,1 kVA power fuel: Diesel 0 tank capacity: 15 l 0: 11 KW cubic capacity: 498 ccm weight of the machine ca.: 165 KG dimensions of the machine ca.: 0,8 x 0,65 x 0,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
rated capacity: max. 8,1 kVA capacity in kVA: bei 400 V - 7,5 kVA rated capacity: bei 230 V - 6,1 kVA power fuel: Diesel 0 tank capacity: 15 l 0: 11 KW cubic capacity: 498 ccm weight of the machine ca.: 165 KG dimensions of the machine ca.: 0,8 x 0,65 x 0,75 m Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regulation (AVR), overload protection, diesel fuel consumption: 1,25 ltr/h at 50% load, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine Details Stock number 1105-03821 Machine type machining center - vertical Make DOOSAN Type DNM 650 II Year of construction 2015 Control type CNC Storage location FRANCE Country of origin Korea Delivery time ON REQUEST Freight base from stock HAGUENAU FRANCE Technical details x-travel 1270 mm y-travel 670 mm z-travel 625 mm CNC control SIEMENS 840 D Table size 1300 x 670 mm table load 1000 kg Spindle holder ISO SK 40 Spindle speeds 8000 rpm Feed infinitely variable 8000 mm/min Rapid traverse 36 / 36 / 30 m/min Drive power - spindle motor 18,5 (15 min) kW Tool changing device 30 items. Operating voltage 380 V Total power requirement 40 kVA Machine weight ca. 8,5 t Space requirement approx. 3.20 x 2.45 x 2.40 m Chip conveyor 4.10 x 0.65 x 1.50 Coolant device 3.60 x 2.20 x 0.80 m Information Excellent condition! LIKE NEW with internal coolant supp ...
used
achine-Details Stock-No. 1105-03801 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DNM 5700 Year of manufacture 2021 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 570 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min Weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 12000 kW turning speed range 8000 1/min tool taper BT 40 table surface area 1200 x 500 mm groove width 18 mm Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12000rpm spindle) SIEMENS 828D CONTROL LIKE NEW ONL ...
used
x-travel: 2100 mm y-travel: 1500 mm z-travel: 1500 mm Number of pallets: 2 size of pallet: 1250 x 1250 mm dimension of workpiece: 2000 x 1425 (H) mm feeds: 0,1 - 12000 mm/min rapid traverse: 24000 mm/min spindle motor: 26/22 kW spindle turning speed range: 10 - 6000 U/min Tool magazine positions: 60 fach tool taper: ISO 50 control: Fanuc 31i-MB workpiece weight: 3000 kg total power requirement: 69 KVA total wight: 31 t dimensions of the machine ca.: 10,5 x 5,8 x 4,1 m Equipment : - CNC control FANUC 31i-MA 4-axis (X,Y,Z,B) - 2- pallets 1250 mm - internal spindle cooling, oil cooler - IKZ 20bar - tool changer 90-fold (BT 50) - chip conveyor - ball screw cooling - Glass scales Heidenhain - CE sign approx. 27000h Power On Hours, 12400h Cutting Time The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
achine-Details Stock-No. 1105-03887 Type of machine CNC Lathe Make DOOSAN DAEWOO Type LYNX 200 LC Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time immediately Freight basis ex site Price Technical details turning diameter 460 mm turning length 300 mm control Fanuc 21-T turning diameter over bed 460 mm turning dia. Over Face-Slide 280 mm Travel -x axis 160 mm Travel -Z AXIS 330 mm centre distance 335 mm rapid traverse X-axis 12 m/min rapid traverse Z-axis 15 m/min turning speed range - main spindle 42 - 4,000 rpm spindle nose A2-6 Spindle Passage 51 mm Spindle Bore 65 mm spindle cone 1/20 power capacity - main spindle 7.5 kW no. of tool upper turret 10 . Shank diameter 32 (round) mm Shank diameter 20 (square) mm tube diameter max. 50 mm Chucking diameter 200 mm Coolant Tank 87 L total ...
new
Scrubber dryer Daewoo DAFL50A like Hako Scrubmaster new year of manufacture 2022 Brand: Daewoo Type: DAFL50A Year: 2022 Working width: 500 mm Electrical: Yes Hours on display: 0 hr Battery Charger: Yes Electrical connection: 220 V Weight: 160 kg Overall dimension L: 1250 mm Overall dimension B: 550 mm Overall dimension H: 1150 mm Description Including batteries, including charger to 220 volts
used
max. carrying capacity 7 t Vehicle weight approx. 9.6 t
used
drilling capacity: 35 mm; drilling depth: 210 mm; speed up to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: v.v. automatic cooling system; unused; 5637;
used
Unused.
used
Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap
used
Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W
used
Unused. Shrinkage Range: 15-63mm, Max Opening: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Package size: 780x540x1350 Weight incl. packaging: 280 kg
used
Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact
used
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095
used
Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw,
used
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095
used
Unused
used
Unused.