daewoo puma used for sale

Case Puma 160 4WD tractor, Technical specifications:, - Year of construction: 2014, - Operating hours: 9150h, Engine & Performance:, - Engine: 6-cylinder, 6.7l turbo diesel, - Engine power: 160 hp (119 kW), - Max. power: 203 hp (151 kW)

Key data: 376 mm, 760 mm, 3500 1/min

Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic Tailstock.: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6000 kg

Key data: 376 mm, 760 mm, 3500 1/min

Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1030 mm turning diameter over slide rest: 800 mm turning length: 3200 mm turning diameter: 900 mm control: FANUC 31i B : 165 mm spindle cone: ASA A1-15 travel -x axis: 470 mm travel -z axis: 3235 mm rapid travel - longitudinal/face: 12 / 10 m/min Measuring Speed: 3 - 1500 1/min spindle drive: 45 / 37 kW max. workpiece weight between centres: 7300 kg max.workpiece weight:each extra steadyrest: 1600 kg tail stock: tailstock adjustment: 3135 mm tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm tailstock quill taper MT: 6 total power requirement: 64,44 kVA weight of the machine ca.: 22 t dimensions of the machine ca.: 7,36 x 2,77 x 2,78 m High-precision turning centre - 3-jaw chuck dia. 800 mm - FANUC 31iB CNC control - Tailstock - Hydraulic steady rest - 12-station tool turret (32 x 32 mm) - Chip conveyor - Coolant system - Tool setter - CE The da ...

Stroj je v dobrém technickém stavu, po předchozí dohodě možnost odzkoušení.

Control Fanuc Max.workpiece diameter ... 800mm Table diameter ... 450mm Max. workpiece height ... 750mm Axis Z ... 780mm Number of positions in the tool changer ... 8 Axis X ... 390mm Axis Z ... 780mm Table speed ... 20-2000 rpm Main engine power ... 30/37kW Max. spindle torque ... 2243/2766Nm Machine weight ... 9000kg L x W x H ... 2000x2800x3300mm

This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information.

This DOOSAN PUMA 240B was manufactured in 2008. A robust horizontal turning machine featuring a 4500 rpm spindle speed and a 12-tool turret for efficient operations. Equipped with Fanuc Control and main dimensions of X242 mm and Z580 mm. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA 240B machine we have for sale. Contact us for more information.

This DOOSAN PUMA GT2100 was manufactured in 2015. A robust horizontal turning machine featuring a main 8 inch chuck, X242 mm and Z580 mm travel, and a 4500 rpm spindle speed. It holds up to 12 tools on the turret. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA GT2100 machine we have for sale. Contact us for more information.

This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for sale.Contact us for more information.

This DOOSAN PUMA 240B was manufactured in 2005. A robust horizontal turning machine featuring a 4500 rpm spindle and a 12-tool turret. Ideal for precision machining tasks. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA 240B machine we have for sale. Contact us for more information.

control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DOOSAN PUMA 3050 LM lathe was manufactured in 2024. It features a robust 12-position BMT55 Servo Power Turret, a powerful main spindle motor at 18.5/15 kW, a spindle speed of 3.000 rpm, and a milling spindle speed of 5000 rpm. The machine includes a 12 hydraulic chuck, chip conveyor, and a FANUC - 0iPLUS control system. Ideal for precision, the DOOSAN PUMA 3050 LM machine we have for sale represents a significant opportunity. Contact us for further details regarding this turning machine.

This DOOSAN PUMA 215 turning machine was manufactured in 2011. It features a swing over bed of 510mm, a workpiece diameter of 270mm, and a length capacity of 522mm. Equipped with a DOOSAN FANUC i Series CNC system, it offers rapid traverses of 16 m/min in X and 20 m/min in Z. A great opportunity to buy this DOOSAN PUMA 215 turning machine. Contact us for further details regarding this vertical turning machine.

turning diameter: 420 mm turning length: 1350 mm spindle passage: 101 mm control: Siemens SL 828D ShopTurn number of controlled axis: 4 turning speed range: 3000 U/min power requirement: 22/18,5 kW rapid speed: 30 m/min number of tapers in turret head: 12/24 BMT 65 number of driven tools in turret: 12 BMT 65 Spindel speed of driven tools: 5000 U/min Spindelpower on driven tool: 7,5/5,5 kW y-axis: +/- 65 mm tail stock: MT-5 weight: 8,0 t dimensions: 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour  ...

- Tool eye - SMW 3 chuck 630-165 mm - SMW Steady rest 85 - 350 mm - LNS Chip conveyor - DORMATEC Air Filter 30 m3

This DOOSAN PUMA 300 C horizontal turning machine was manufactured in 2006. It features a 12-inch chuck, a maximum turning diameter of 350 mm, and a maximum turning length of 760 mm. The spindle supports a speed of up to 3,500 rpm with a bar capacity of 76 mm. Ideal for precision turning, it also includes a servo indexing tool post with 12 tools. Contact us for more information about this machine.

CONTROLS   CNC controls FANUC 31I MODEL A BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes   number of c-axes: 2   number of y-axes: 1 WORKING RANGE TURNING   turning diameter (max): 230 mm   worpiece length max.: 700 mm MAIN SPINDLE   spindle revolutions (min): 50 /min   spindle revolutions (max): 5000 /min   c-axis: yes COUNTER SPINDLE   spindle revolutions (min): 50 /min   spindle revolutions (max): 6000 /min   c-axis: yes X/Z SLIDE   tool fixture: Turret ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2800 mm   space requirements -front/back-: 1630 mm   total height: 2200 mm   total weight approx.: 9000 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   band filtration unit: yes   coolant through  ...

This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information.

Key data: 700 mm, 5050 mm

CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation

This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details.

This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details.

This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details.

user power

pressure: 70.0 t punching cross-cut in cmm: 27 in 20 mm punching cross-cut in cmm: 32 in 14 mm work height max.: 1060 mm column arm: 500 mm weight of the machine ca.: 1500 kg. total power requirement: 7.0 kW range L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 750 mm stroke: 60 mm : 38 Hub/min engine output: 5 kW weight of the machine ca.: 1.885 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW : 20x20 mm : 28x11 mm Overall size: 1500x1100x2000 mm weight of the machine ca.: 1.150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 € : 220.8 € : 1 : 55 to : 500 mm : 40 x 10 mm : 37 1/min : 5 kW : 1550 mm : 1200 mm : 1950 mm : 1150 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.

control: FANUC 21i-TB Control x-axis: 390 mm z-axis: 780 mm spindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma

Ref. №: 4222 Portion cutting machine for meat with/without bone, bacon, ham, diary products, fish, vegetables Cutting chamber size (LxWxH): 700 x 220 x 240 mm Cut-off length: 0-70 mm Machine width: 90,0 cm Machine length: 200,0 cm Machine height: 145,0 cm Motor power: 3,4 kW Operating voltage: 380 V, 50 Hz

Manufacturer: DOOSAN Model: PUMA 2600 Year: 2012 Condition: Used Stock number: 9439 Control system: FANUC Maximum turning length: 1245 mm Max. turning diameter: 376 mm Maximum spindle speed: 2800 1/min Weight: 5400 kg

This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details.

This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details.

DOOSAN MX2100ST turning center, year 2022, equipped with FANUC 31i-B5 control. This multi-tasking lathe offers X1/Z1 travels of 565/1,050 mm, Y-axis ±85 mm, and B-axis indexing. Main and counter spindle each deliver 22/18.5 kW at 5,000 rpm with A2-6 nose and 8 chuck; 76 mm spindle bore accommodates bar stock up to ø65 mm. BMT55P turret with 12 driven tool positions (5,000 rpm) plus 80-station Capto C6 ATC with 12,000 rpm milling spindle (18.5/15/11 kW) and 2.0 s tool change. Single Swiss owner; delivered complete with LNS Sprint 565 S2 bar feeder (3.2 m, ø3â€34 mm), 55-bar high-pressure coolant to milling spindle, electric tool-measuring arm, parts catcher, oil-mist extraction and HAINBUCH TOPlus/Mando workholding.

Horizontal turning machine manufactured in 2006. This DOOSAN Puma 240 MB features driven tools and is equipped with a Fanuc 0iTC control unit. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 240 MB machine we have for sale. Contact us for further details.

The machine is in good technical condition; testing is possible by prior arrangement. 400 operating hours; condition comparable to a new machine. The lathe comes with accessories and is ready for immediate operation. Equipment: driven tools, chip conveyor, 20-bar high-pressure pump, 250mm hydraulic chuck, 12-station turret, modern FANUC i-Series CNC control, sets of soft jaws, bar feeder, regular maintenance history, and documentation.

The machine is in good technical condition; testing is possible by prior arrangement. Max. turning diameter: 350 mm. Max. turning length: 500 mm. Max. bar turning diameter: 79 mm. Max. spindle speed: 3,500 rpm. Chuck size: 10″ (254 mm). Spindle motor power: 18.5 kW. Additional equipment: 1x Morse taper 2 adapter, 1x Morse taper 3 adapter.

Manufacturer: DOOSAN Model: PUMA GT 3100 M Year: 2023 Condition: Used Stock number: 9431 Control system: FANUC i-Series Maximum turning length: 725 mm Maximum turning diameter: 376 mm Maximum turning diameter over bed: 720 mm Maximum turning diameter over support: 590 mm X-axis travel: 260 mm Z-axis travel: 830 mm C-axis travel: 360 Maximum spindle speed: 2800 1/min Maximum workpiece weight: 1000 kg Number of all tools: 12 pieces Number of driven tools in the turret: 12 pieces Number of axes: 3 pieces Max. rod diameter: 102 mm Weight: 5650 kg Equipment: Powered tools Baking (2 pieces) Suction

General Manufacturer: Doosan Type: Puma 2100MS Year of Make: 2011 Control: Fanuc iSeries Travel: X 260 mm Z 590 mm Rapid traverse X/Z: 30 m/min Capacity Turning diameter: max. 406 mm Turning length: max. 520 mm Main spindle Spindle speed: 4,500 rpm Spindle power: 7.5 kW Revolver Number of tools: 12 Dimensions and weight Dimensions: L 3,415 mm x H 1,900 mm x W 1,863 mm Weight: approx. 5,560 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Master 80 HF 33 L Bar Feeder, Year 2011 Sub-spindle AGW Tool holder BMT45 Parts catcher

The APV Puma 2.2.9 Centrifugal Pump is a pump used in hygienic applications. Designed for Cleaning-in-Place (CIP). Can be used in hygienic applications like dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor). Diameter of the impellor: 191 mm (7,5). Pump casing: 9. Connections on the inlet: 2. Connections on the outlet: 2. Capacity with the current motor: ± 35 m3/h at a differential pressure of ± 2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1656, Diameter of the impellor: 191 mm, Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor), Current estimated capacity: ± 35 m3/h at a differential pressure of ± 2 Bar

Manufacturer: DOOSAN Model: PUMA MX 1600 ST Year: 2014 Condition: Used Stock number: 9512 Control system: FANUC Maximum turning length: 899 mm Max. turning diameter: 330 mm Maximum turning diameter over bed: 680 mm Maximum main spindle power: 15 kW Maximum spindle speed: 6000 1/min Weight: 11500 kg Equipment: Tool Holder Bar Feeder Strip workpiece remover Grips 2x universal chuck

Equipped with Fanuc Series 18T operating system. Includes chip removal belt. With a 12-position rotating tower. Auction-ID: A1-49846-8

\" General Description 4WD agricultural tractor manufactured by Case IH , model Puma 195 . Heavy-duty tractor designed for field cultivation, implement operation, transport and general agricultural applications. Equipped with front hydraulics, suspended front axle and an enclosed air-conditioned cab. Technical Details Manufacturer: Case IH Model: Puma 195 Machine type: Agricultural tractor Year: 2008 Operating hours: 9,820 h Drive: 4WD / MFWD Transmission: 18 forward / 6 reverse powershift TLS suspended front axle Front 3-point hydraulic linkage Rear 3-point linkage Multiple rear hydraulic connections / remotes Air-conditioned enclosed cab Electronic / hydraulic controls Multifunction control console / joystick Large agricultural tyres on steel rims Condition Used agricultural condition. The tractor appears substantially complete with front linkage, rear linkage, h ...

Knives for A750 - TREIF PUMA S Article number Treif - 58114 / 846000 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Manufacturer: TREIF Type: PUMA CE 700 EB Product holder with 45 catchers / teeth / for PUMA CE 700 EB, Art. No. 124777 Dimensions: L 180 x W 185 mm Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

3 pieces Teflon knife for slicer TREIF type PUMA CE 700 EB Article number Treif : 244755 = 83581 - ID 16391, 12153,11695 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl