cylindrical grinder used for sale

Grinding diameter: 630 mm Grinding length: 2000 mm Peak height: 320 mm Table speed - without steps: 0.005-5 m / min Longitudinal table movement min./max.: 5/3350 mm Table speed: 8 m / min Grinding headstock-cross movement: 420 mm Workpiece headstock motor: 3,0 kW Grinding headstock-motor power: 22 kW Motor of the internal grinding device: 3 kW Lubricating pump motor: 0,11 kW Machine weight approx.: 15700 kg Space requirement approx.: H1970 / B3100 / L12650 mm

Machine status: brand new, in working condition. Year: 2021 Reason for sale: the machine doesnt perform the functions needed for our production cycle (not included in the scope and impossible to add). Ownership: Spetztekhosnastka Ltd., Ukraine Detailed machine specifications will be provided on request.

Description: SPECIFICATIONS Brand: Glauchau Type: SI 6/3 Year of construction: 1997 CNC milled Maximum slip depth: 250 mm Grinding depth: ø650 mm Speed: 50 - 500 rpm Internal slice installation X (center internal slide): 155 mm Length displacement internal grinding device on table: 540 mm Tool grinding device Z (panel placement): 700 mm Overall diameter: ø650 mm Grinding diameter for inside grinding: ø10 - 500 mm weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,300 x 2,200 mm

Description: KELLENBERGER 1000 U circular grinding machine The machine comes from a university training workshop. The machine is equipped with: - Internal grinding device with internal grinding spindle - Extensive accessories, some of which have been little or not used (see photos) Further technical data can be found in the photo on the manufacturer's brochure page! grinding diameter: 250 mm, grinding length: 1,000 mm, weight approx.: 3,100 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,700 x 1,700 mm

Description: Max. Grinding diameter : Ø 280 mm Center height : 150 mm Center width : 800 mm Grinding wheel holder for wheel: Ø 400 x 127 Grinding wheel diameter : max Ø 400 mm wheel speed : 45 m/s Control : Fanuc 21 grinding diameter: 280 mm, grinding length: 800 mm, control: FANUC 21, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,500 x 2,800 mm

Description: WEMA GLAUCHAU Grinding Centre for internal and external machining Machine number and Control Serial number: 330025 Control: SIEMENS Sinumerik 840D sl Workpiece spindle unit (U/81/L-adjustment) Travel (U-axis): 470 mm Swivel angle (B1 axis with longitudinal adjustment): -1° / +12° , Swivel angle (B 1-axis workpiece spindle unit): -20° / +30° Manual longitudinal adjustment of workpiece spindle (L-adjustment): 470 mm Drive power of the workpiece spindle: 3.8 kW Speed (infinitely variable): 1 - 895 rpm Spindle head size: A5 according to DIN 55026 Through hole: 55,5 mm Max. workpiece diameter: 400 mm Max. spindle head load: 200 kg Centre height over swivel bridge: 200 mm Internal grinding attachment (Z1/X1/B2) Traverse path Z1 axis: 470 mm Travel X1-axis: 200 mm Drive power S1/S2: 3.5 kW Mounting hole grinding support S1/S2: Ø100 mm Mounting  ...

Description: tip height: 125 mm , clamping area between tips: 250 mm , grinding discs diameter x width x drilling 130 x 20 mm. , MK3 , bed speed/spindle speed: 2420/3290 rpm connection: 2,5 kW accessories: grinding wheels, tailstock machine is in good technical condition, after previous agreement the possibility of testing weight approx.: 1,350 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 1,100 x 1,500 mm

CONTROLS   CNC controls FANUC WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 350 mm   grinding length: 650 mm TAILSTOCK   distance betw. centers (max): 650 mm   sleeve stroke: 35 mm   sleeve diameter: 80 mm   taper: MK 3 SPINDLESTOCK GRINDING SPINDLE   tilting range (B-direction) min: 0 °   rotating range B-axis up to: 8.5 °   - mode of operation: manual GRINDING TOOL   type of grinding tool: wheel   diameter (max): 500 mm   width: 63 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2670 mm   space requirements -front/back-: 2100 mm   total height: 1800 mm ATTACHMENTS (GRINDING)   internal grin ...

CONTROLS   digital read out HEIDENHAIN WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 349 mm WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 250 mm   grinding length: 1000 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4000 mm   space requirements -front/back-: 2000 mm   total height: 1500 mm   total weight approx.: 2500 kg ATTACHMENTS (GRINDING)   Flange of grinding wheel: yes   coolant unit: yes

CONTROLS   digital read out WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 200 mm   workpiece weight between centers (max): 400 kg   workpiece weight flying (max): 20 kg WORKPIECE SPINDLESTOCK   spindle revolutions (min): 80 /min   spindle revolutions (max): 800 /min   tool fixture: MK 4 TAILSTOCK   distance betw. centers (max): 400 mm   sleeve stroke: 20 mm   taper: MK 2 SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1600 /min   spindle revolutions (max): 2200 /min   drive power: 3 kW GRINDING TOOL   diameter (max): 350 mm   borehole: diameter: 127 mm   width: 30 mm

CONTROLS   CNC controls GE FANUC SERIES 18I-T WORKING RANGE INTERNAL GRINDING   grinding diameter (max): 300 mm WORKPIECE SPINDLESTOCK   spindle revolutions (max): 850 /min SPINDLESTOCK GRINDING SPINDLE   rotating range B-axis up to: 15 ° SPINDLESTOCK INTERNAL GRINDING   Z-axis travel: 500 mm   X-axis travel: 200 mm   spindle revolutions (min): 30000 /min   spindle revolutions (max): 60000 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3300 mm   space requirements -front/back-: 1950 mm   total height: 2150 mm   total weight approx.: 5000 kg Machine equipment: - 3 internal grinding spindle positions 30,40,60,000 rpm - 2 degree angle adjustment controlled (pr ...

CONTROLS   CNC controls FANUC 310I-A WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 180 mm   workpiece weight between centers (max): 25 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 400 mm   grinding length: 1000 mm TAILSTOCK   distance betw. centers (max): 1000 mm   taper: MK 4   Z-axis travel: 1600 mm SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 220 mm   Z-axis travel: 1600 mm   tilting range (B-direction) min: 0 °   rotating range B-axis up to: 25 °   drive power: 6.8 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 400 mm   borehole: diameter: 127 mm ELECTRICAL SPECIFICATIONS   mains power supply: 45 kVA   mains voltage: 400 V   mains frequ ...

CONTROLS   conventional WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 450 mm   workpiece weight between centers (max): 200 kg   workpiece weight flying (max): 50 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 290 mm   grinding length: 966 mm TABLE -CYLINDRICAL GRINDING-   tilting range (B-direction) min: 6 °   rotating range B-axis up to: 9 ° WORKPIECE SPINDLESTOCK   spindle revolutions (min): 32 /min   spindle revolutions (max): 500 /min   drive power: 0.7 kW   spindle bore diameter: 24 mm   tool fixture: MK 4 TAILSTOCK   distance betw. centers (max): 1120 mm   sleeve stroke: 40 mm   taper: MK 4 SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 140 mm   drive power: 5.5 kW ...

CONTROLS   CNC controls GE FANUC SERIES 16 GC WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 350 mm   workpiece weight between centers (max): 130 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 350 mm   grinding length: 1000 mm WORKPIECE SPINDLESTOCK   spindle revolutions (min): 30 /min   spindle revolutions (max): 1000 /min   continuous speed variation: yes   c-axis: yes TAILSTOCK   distance betw. centers (max): 1000 mm SPINDLESTOCK GRINDING SPINDLE   Z-axis travel: 1000 mm   tilting range (B-direction) min: 0 °   rotating range B-axis up to: 210 °   drive power: 7.5 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 500 mm SPINDLESTOCK INTERNAL GRINDING   tilting ran ...

CONTROLS   CNC controls FANUC 0I-TFP WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 350 mm   workpiece weight between centers (max): 80 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 350 mm   grinding length: 500 mm WORKPIECE SPINDLESTOCK   spindle revolutions (max): 1500 /min   drive power: 3 kW   spindle bore diameter: 30 mm   tool fixture: MK 5   c-axis: yes   - positioning/indexing: 0.5 ° TAILSTOCK   distance betw. centers (max): 400 mm   sleeve stroke: 60 mm   taper: MK 4 SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 370 mm   Z-axis travel: 500 mm   tilting range (B-direction) min: 60 °   drive power: 9 kW GRINDING TOOL   diameter (max): 500 mm    ...

CNC external grinding Brand: Morara quick Grinder E 400 CNC year 2007 Turn Iso50 piece Tailstock Various Iso50 connections Losma aspirator Always worked with internal oil Machine kept very well and in working condition

Complete with table dresser, 2 Fixed Steadies and 1 other spindle and coolant tank   Dimensions 558.8 x 127 x 152.4 mm, 22’ x 5’ x 6’ weight 7.5 tons   Machine is in Very good condition

Code 71164 Description Universal Hydraulic Cylindrical Grinder Make SHIGIYA SEIKI Model GU – 27.100 H Serial No. 10222 Year 1978 Grinding length, max. 1000 mm Grinding diameter, max. 265 mm Centre height 135 mm Max. Weight workpiece 130 kg Table tilting angle - 3° till + 7° Table speeds 0,05 – 7 m/min Diam. Grinding wheel 350 mm Width Grinding wheel, max. 25 – 50 mm Motorpower grindingwheel 3,7 kW Speeds workpieceholder steples from 17 – 250 rpm Total power 9,3 kVA 380 Volts Machine size L x W x H 4,0 x 1,8 x 1,6 meter Weight 3200 kg Accessories Coolant, books, electric cabinet,etc. Condition Machine is in good condition

Code 101237 Description Universal Cylindrical Grinder Make WMW Heckert Model SA 5 U x 630 Serial No. 3115 Year 1981 Grinding length, max. 630 mm Grinding diameter, max. 275 mm Centerheight 140 mm Max. Weight workpiece 125 kg Table tilting angle - 5° till + 11,5° Diam. Grinding wheel 500 mm Width Grinding wheel, max. 100 mm Motorpower grindingwheel 5,5 kW Speeds workpieceholder 31,5 – 710 rpm Total power 12,5 kVA 380 Volts Machine size L x W x H 3,9 x 2,3 x 1,6 meter Weight 4800 kg Accessories coolant with magnetic some tooling Condition Machine is in good condition

Cylindrical Grinder Model: FM41G-1600CNL45 New in 1988 Control: FM4 CNC Maker: Fortuna (Germany) Ser. No. 15674 Maximum grinding diameter: 275mm Maximum grinding length: 1600mm Additional measurement device

Cylindrical grinder BU 28/1000 with accessories

Cylindrical grinder 2Ud/700 with accessories.

External cylindrical grinder -Visualization on 2 axes - distance between tips:400 [mm] - tip height:100 [mm] - longitudinal slide stroke:400 [mm] - cross slide stroke: 45 [mm] automatic rapid feed: 38 [mm] - grinding wheel diameter: 350 [mm] - max. grinding wheel width: 50 [mm]

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

Accessories available. Main data: Distance between top 400 mm Centre height 100 mm Table: Längsverfahrweg of Max 420 mm Kontinulerliche process speed up to 5 m / min Reverse stop at 4 sec Angle 9 ° Grinding spindle stock: Wheels Ø 300 mm Grinding width at Ø 300 up to 50 mm Grinding width at Ø 450 up to 80 mm Grinding wheel hole with Ø 300 127 mm Grinding wheel hole with Ø 450 203 mm Continuous feed up to 0.8 mm / Ø Work piece headstock: Taper Mount MK 4 Orientation 360° Continuous speed regulation 65 500 U/min Tailstock: Inner taper of Quill MK 3 Adjusting spindle stroke 20 mm Dimensions: 2020 mm Width: 1200 mm Height 1350 mm Net weight 1100 kg

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...

- Motor grinding roller 5.5 kW motor feed 2 x 0.37 kW voltage 400 V / 50 Hz feed speed 0 - 10000 mm/min- max. Workpiece diameter 100 mm- max. curves Radius 200 mm- min. workpiece length 400 mm- grinding belt dimension 1450 x 100 mm- Dimensions L=1000, W=900, H=1400 mm - weight 680 kg

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...

Internal circular grinding machine with plan grinding equipment, second-hand internal and face grinding machine, used Type / type: SI 6/1 x 315 Manufacturer / make: WMW Year / year of make: 1983 schleifbarer the protection of workpiece diameter / grinding diameter: inner / internal 20... 400 mm; outside / external 500 mm maximum workpiece diameter workpiece protection /. maximum diameter of work piece: 500 mm Max grinding depth / maximum grinding length: 315 mm schleifbarer angle of cone / cone grinding: 60 ° Internal grinding motor power / power drive motor grinding of internal: 7,5 kW Internal grinding spindle speeds / rev's of internal grinding spindle: 2640... 16500 RPM Power cylindrical grinding device / power drive of face grinding attachment: 4 kW Power work-piece motor / power drive of workpiece engine: 1.5 kW Workpiece spindle speeds / rev's piece of work s ...

Type SAXW 63/3000 Producer WMW Meuselwitz Year of manufacture 1979 Parameters 63mm, 3000mm Location Praha CZ Swing 750 mm Distance between centres 3000 mm Max. weight of workpiece 6000 kg Machine suitable for modernisation

Stable production machine, peak width 1000mm Peak height 180mm Grinding wheel diameter 500 mm ready for use. We specialize in the revision of grinding machines, and offer service, maintenance, repair, conversion and control modernization.

Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the serv ...

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Overhauled with geometric KEL ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

grinding diameter: 360 mm grinding length: 650 mm centre height: 180 mm Control: SIEMENS 840 D total power requirement: 15 kW weight of the machine ca.: 9500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter max.: 30 mm regulating wheel width: 12 mm max. width of grinding wheel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 800 mm grinding length: 4000 mm Control: SIEMENS Simatic OP3 grinding wheel diameter: 800 mm spindle speeds: 0 - 70 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 630 mm grinding length: 3000 mm workpiece weight: 2500 kg grinding wheel diameter: 750 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.