cutting steel used for sale

M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller

we have two Polar loaders model TR150BL-3 1) Year 2001 with stand-alone gripper arm - BM5125 - comes from a P137X 2) Bj 2008 model - BM5126 - comes from a P155X cutting machine For the use of the devices, a rear table feeding of the high-speed cutter is a prerequisite

Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition

Board cutter - board shear Make Schimanek Model 10-110 Year 1980's Cutting length 110 cm Details Iron cast table 72 cm, front lay+small cut device, back lay

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Please note! Needs to be checked

CNC Plasma Cutter, Plasma Cutting System, Portable Plasma THC, Large Format portable plasma cutting system / oxyfuel cutting machine large format Working area 3000x1500mm without plasma cutter With height compensation THC Software StarCAM Machine Voltage Signal phas 220V ,50HZ Plasma power Voltage 380V 3 Phase,50HZ Cutting mode Plasma+Flame Effective cutting range(mm) 1500mm×3000mm Cutting speed(mm/min) 50-3500mm/min Rotational Speed 0-5000mm/min Plasma cutting thickness According to models Moving precision ±0.2mm/m Cutting system Fangling F2100B THC Fangling F1620 Software StarCAM Total weight(kg) 150kg Emergency stop Yes Working temperature -5~45°C Relative humidity

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

Z-Splicing Machine Make: Z-AUTOMATION Model: Z splicing stand alone Year 2014 8 kW, 6 bar Profile Cross sections 50 x 40 mm 2 - 4 splicing cavities Length 4600 mm Siemens Simatic HMI touch screen control Foot pedal control Emergency kill switch

Grinding mill with blades Brand: Folcieri, cutting chamber: 1000x350 mm, motor: 125 hp. Flywheel, vacuum cleaner, cyclone and big-bag support with feeding belt: 4.5x 0.75 m. With electrical panel.

Equipped with 12500 W; 5m; Maximum power 120A; Unused in box

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

EAGLE EVISION 1530 F2.0 AF FIBER laser, manufactured in 2013 in Poland with its excellent rigidity and high stability, achieves the highest precision and quality in machining stainless steel, structural steel and aluminium sheets. The EVISION 1530 F2.0 AF laser cutting machine uses a high-quality 2 kW laser beam, which makes laser cutting smooth and trouble-free. The edges of the machined sheet metal are distinguished by their extraordinary smoothness, and the workpieces themselves are free of any irregularities. The large work table with a length of 3000 mm and a width of 1500 mm, together with the state-of-the-art EAGLE CNC control, make the machine capable of handling even the most demanding machining operations. The fibre laser weighs approximately 20 tonnes. Technical specifications of the EAGLE EVISION 1530 F2.0 AF laser - laser beam power: 2 kW (2000 W) - CNC control: EAGLE  ...

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Welding by contact (arc formation): Yes; Unused in box

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

For the purpose of pillow filling; mounted on profile steel mobile base;

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

Merkle Slitter 500mm wide

USI Cumberland Grinder / Granulator 28x20 50 Hp 8mm Grid 2 new dead blades 3 sharpened fly blades One new start / stop control box

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

4000 x 2000mm 10000w / 10KW FIBER laser

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

4000 x 2000mm 6000w / 6 KW FIBER

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Inv. Num. : 6906 Type: Platino Fiber Producer: Prima Power Created: 2014 Parameters: Control System: Prima Power Hours of operation: 27 710 h Beam ON: 12 424 Laser power: 3 kW Working table length: 3000 mm Working table width: 1500 mm Maximum sheet thickness (carbon steel): 20 mm Maximum sheet thickness when cutting (stainless steel): 8 mm Maximum sheet thickness (copper): 6 mm Maximum sheet thickness when cutting (aluminum): 8 mm Feed length X-axis: 3065 mm Feed length Y-axis: 1560 mm Feed length Z-axis: 150 mm Source: IPG 3000 DE→EN Machine height: 2200 mm Machine length: 9797 mm Machine width: 3757 mm Machine weight: 10000 kg Equipment: Cooling Vacuum Two Wichsel tables with steel grates Cutting gas: nitrogen, oxygen and compressed air

CINCINNATI ACW6 slitting line is used in the processing of thin steel sheets with a maximum thickness of 4 mm. The process consists in gradually unrolling the sheet coils towards cutting rollers with special roller knives with a thickness of 5 to 30 mm, and then passing the sheet between the rollers for precise slitting. After the slitting process, the sheet is wound onto coils ready for further processing. The ACW6 slitting line guarantees the highest product quality while making optimum use of the raw material. The CINCINNATI coil slitting line consists of: – sheet decoiler – sheet metal winder – roller knives (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – ejector spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – slitting aggregate unit – brake Technical specifications of the CINCINNATI ACW6 slitting line - maximum sheet thickness: 4 mm - minimum shee ...

MAZAK Laser Cutting Machine STX3015 4kW TOP CONDITION – OVERHAULED IN 2023 Year of construction: 10/2015 very well preserved, overhauled MAZAK laser machine with 4000W Panel format: 3000mm x 1500mm minimum installation area of 2.9m x 7.3m Small parts conveyor belt LAN/USB connection automatic nozzle change automatic focus position adjustment Quick piercing into thick materials Plasma sensor for stainless steel cutting Piercing sensor for piercing Burning sensor for monitoring when cutting structural steel Completely encapsulated machine cover no foundation necessary FE: up to 22mm VA: up to 15mm ALMG: up to 10mm Plastic possible incl. software incl. warranty incl. suction incl. commissioning + training =optional with fully automatic loading and unloading=

Inv. Num. : 6794 Type: 3015 Producer: BODOR Created: 2023 Parameters: Laser power: 12 kW Working table length: 3000 mm Working table width: 1500 mm Machine weight: 9000 kg

Inv. Num. : 6924 Type: Roto Mini 1100 Producer: Nessap Created: 2018 Parameters: Max. working length: 1100 mm Working diameter: 500 mm Power: 80 A Maximum cutting thickness: 8 mm Equipment: Anti-collision system Extraction of the flue gas inside the cut pipe Cover of the X-axis with protective bellows Extendable ashtray A few clues

Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included

Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!

we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.

M. No.: 7061504 Format (cm): 78 Equipment / Additional information: Side table, air table, 1x reserve knife

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm Dynamic Edition