cutting mill used for sale

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rotary  ...

Various millstones

Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Stable milling machine - Made in Taiwan - New - unused 3 Axis Digital Display - Heidenhain Scales Electronic handwheel for driving machine ashes by hand Tool spindle vertical and horizontal Tool holder steep taper 50 Max. spindle speed 1,600 rpm Travel X 1100 mm Travel Y 720 mm Travel Z 780 mm Table clamping surface 1500 x 450 mm Max. workpiece weight 1000 KG Rapid traverse of the machine axes 6000 mm/min Infinitely variable axle feed can be adjusted via potentiometer Coolant system Chip protection on the router table

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Stock number: 3922 PROCESSING Manufacturer: EMCO, Type: MILL E-600 Machines NO.: M-06204707, Year of manufacture: 2007 Specifications: Table size 700 x 500 mm Large table load 500 kg Longitudinal movement (X) 600 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Size distance spindle/table 700 mm Spindle cone 40 iso Stepless spindle speeds 10000 rpm Total power 16 KVA Tool changer 20 places Control Fanuc Oi-MC Fabr. Controlled in axes 3 Operating hours spindle 3167 hours Accessories: Cooling by spindle Chip conveyance. Cooling water system. Length: 2040 mm, Height: 3000 mm, Width: 2500 mm, Weight: 3800 kg

We offer a Milling Machine Routing Star V that is an ideal choice for automotive component machining and other high-precision tasks. We have four machines available from different years ( 2012, 2014, 2017) Technical Data: Dimensions (L x W x H): 5600mm x 2990mm x 2950mm Weight: 8000 kg Power Rating: 12 kW Connection Power: 3 x 400 V, 50 Hz Hydraulic Working Pressure: Max (bar not specified) Pneumatic Working Pressure: Not specified Table Size: 1400mm x 700mm Table Type: Rotating Table Number of Robots: 2 Tool Changer: Yes Find more here - / Contact us at -

Exchange units for contour milling HOMAG

quill dia 110 mm quill stroke 100 mm ISO 40 (DIN 2079) 360° swiveling of the spindle head previously used on Hermle UWF 1000

Key data: 300 mm, 600 mm

Iddon 24inch (600mm) x 12inch (300mm) Two Roll Mill Chilled cast iron rolls Rotary joints Right angle drive Radicon Gearbox Fulton Rotary joints AEI electric construction motor Safety bar back and front of mill

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg. Spindle speed: 6000rpm, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2700mm, weight: approx. 1550kg. Including an additional control panel on request (not included in the price). Documentation available. On-site inspection is possible.

GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°Tool magazine 25 placesTool magazine 25 places (suita ...

Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - / Contact us at -

Key data: 1000 mm, 500 mm, 530 mm

Like new: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 530 mm Table dimensions: 406 x 1,372 mm Spindle mount: BT 40 Spindle speeds: 1 - 8,000 rpm Control: Fagor Equipped with: - Coolant system -Operating instructions Country of origin: Taiwan Engine power: 10 hp Machine LxWxH: 2,900 x 2,280 x 2,550 mm Machine weight: 3,100 kg

Notching cutter Comall Type: Mill One

General SKU120X675 LocationBarneveld MakeVMA-Getzmann TypeDispermat 5 No.601-9814889 Year of constructionunknown, Milling chamber made of glass Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck Information Mounted on framecheck Floorspace0,9x0,6 M Total height1,5 M Weight175 KGSand millsVMA-GetzmannMills > Sand millsBrand > VMA-Getzmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnevel ...

General SKU301W572 LocationBarneveld MakeWab Bachofen TypeKD15 No.740364 Year of construction1973 Main Features MaterialStainless steel Volume15 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel 1.4435 (316L) Horizontal sand millcheck Capacity15 l Housing dimensions Dia. 220 mm , length 430 mm InletDia. 30 mm OutletdIA. 30 MM Motor22 kW, 3x 500 volt Information Total height1,60 m Weight590 kg Floorspace0,75x1,00 mSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379T1136 LocationBarneveld MakeDrais TypePML-V+H No.54 310 Year of construction1992 Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4571 (316Ti) Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck Information With switchcheck With switchgearcheck Weight340 kg Floorspace1,2x0,9 m Total height0,7 m ATEX compatiblecheck Extra Specificationsthe machine comes with many additional partsSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

General SKU292W971 LocationBarneveld MakeDynomill TypeECM-pilot No.050917 Year of construction2005 Main Features MaterialStainless steel Volume1.5 Ltr. Motor7.5 KW Specified Features - Sand mill MaterialStainless steel 1.4301 (304) Horizontal sand millcheck Capacity1,5 l Housing dimensions ø 130 x 150 mm Inletø 20 mm Outletø 20 mm With sievecheck With mechanical sealcheck With jacketcheck Motor7,5 kW, 400 V, (Ex), 1445 rpm Rotor speed2895 rpm With pumpcheck Information With switchcheck Weight400 kg CEcheck Floorspace0,68 x 0,74 m Total height0,58 m ATEX compatiblecheck Extra Specificationsmounted on table. cap. 10-200 l/h, cooling water consumption 800 l/h Sand millsDynomillMills > Sand millsBrand > Dynomill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

General SKU300P750 LocationBarneveld MakeFryma Maschinen AG (DE) TypeDelmix MZM-VK-7 No.L 14500 Year of construction1991 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter90 mm Specified Features - Colloid mill MaterialStainless steel EmulsifierVacuum emulsifying system Vacuum (t)check Rotor sizesdia.120mm With hopper+/- 7 ltr Hopper jacketed(+ 1 bar) Inletdia.90mm Outletdia.60mm Motor2,2 KW, 220/380 Volt With gate type stirrercheck With scraperscheck Motor0,12 KW, 220/380 Volt With vacuum pumpEdwards RV12 Motorcheck Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,3x0,8 M Total height1,7 M Weight240 KGColloid millsFrymaMills > Colloid millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

General SKU202U012 LocationBarneveld MakeFryma-Maschinenbau GMBH TypeMS-18 No.M17181 Year of construction1996 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.1 Ltr. Motor10 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillcheckCoBall mill Capacity1,1 Ltr. Housing dimensions Dia 200x135 mm Inlet15 mm Outlet15 mm With jacketcheck Max. temperature80 °C Motor10 kW, 400 Volt, 1465 rpm, (EX) Rotor speed1296 rpm Without ballscheck With pumpcheck Motor0,37 kW, 380-420/218-242 Volt, 1430 rpm Information Mounted on framecheck With switchcheck With switchgearcheck( as is) Weight480 kg CEcheck Floorspace1,2x0,9 m Total height1,76 m ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition ...

General SKU323T842 LocationBarneveld MakeNetzsch TypeLME 60 No.204768 Year of construction1980 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor55 KW Specified Features - Sand mill MaterialMild steel, Stainless steel Horizontal sand millcheck Capacity60 ltr Housing dimensions Dia 410x1100 mm InletDia: 25 mm OutletDia: 60 mm With mechanical sealcheck With jacketcheck Motor55kW, 380 Volt, 1480 rpm (EX) Without ballscheck Information Mounted on framecheck With switchcheck(as is) Weight2500 kg Floorspace2,35x1,6 mtr Total height2,3 mtr ATEX compatiblecheckSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

General SKU292W526 LocationBarneveld MakeNetzsch TypeLMZ 25 No.204057 Year of construction1998 Main Features MaterialStainless steel Volume25 Ltr. Motor36 KW Specified Features - Sand mill MaterialStainless steel 1.4301 (304) Horizontal sand millcheck Capacity25 l Housing dimensions ø 345 x 570 mm InletDN50 OutletDN500 With sieve200 µm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor36 kW (400 V, 1480 rpm (Ex)) With variable speed drivecheck Information With switchcheck Weight2300 kg Floorspace2,0 x 0,80 m Total height1,7 m ATEX compatiblecheckSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...

General SKU292W496 LocationBarneveld MakeNetzsch TypeLMZ25 No.204449 Year of construction1992 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume25 Ltr. Motor37 KW Specified Features - Sand mill Horizontal sand millcheck Capacity25 Ltr. Housing dimensions Dia. 400x600 mm InletDN25 OutletDN37 With sievecheck 0,4 mm With mechanical sealcheck With jacketcheck Motor37 kW, 380 volt With variable speed drive500-1000 rpm MaterialHeat-resistant stainless steel 1.4767 Sand mills Motor37 kW, 380 volt, 500-1000 rpm Information Mounted on framecheck With switchcheck Weight2000 kg Floorspace1,90 x 1,00 m Total height1,85 m ATEX compatiblecheck Technical specs Extra informationwith cooled rotor.Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared ...

General SKUR0238 LocationBarneveld MakeZoz GmbH (D) TypeSimoloyer CM 01-2 L No.4205 Year of construction1999 Main Features MaterialStainless steel Volume2 Ltr. Motor1.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity2 Ltr. Housing dimensions dia. 140x130mm Inletdia 25mm Outletdia. 25mm With jacketcheck Motor1,5 kW 230/400 Volt Rotor speed200-1500 rpm MaterialStainless steel Information With switchgearcheck Total height1,4 M Weight400 Kg CEcheck Floorspace1,3x0,7 M Extra Specificationswith 3 extra houses with 5 extra rotors various spare parts Sand millsZozMills > Sand millsBrand > Zoz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU292W497 LocationBarneveld MakeNetzsch TypeLMZ60 No.204.710 Year of construction1993 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume62 Ltr. Motor70 KW Specified Features - Sand mill MaterialHeat-resistant stainless steel 1.4767, Stainless steel Horizontal sand millcheck Capacity62 Ltr. Housing dimensions Dia. 460x710 mm InletDN25 OutletDN50 With sievecheck 0,6 mm With mechanical sealcheck With jacketcheck Motor70 kW, 380 volt, 450 rpm Rotor speed450 rpm Without ballscheck Information Mounted on framecheck With switchcheck Weight3500 kg Floorspace2,20 x 1,00 m Total height2,20 m ATEX compatiblecheck Extra SpecificationsCooling on sieveSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKU292W495 LocationBarneveld MakeNetzsch TypeLMZ60 No.204.709 Year of construction1993 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume62 Ltr. Motor70 KW Specified Features - Sand mill MaterialHeat-resistant stainless steel 1.4767 Horizontal sand millcheck Capacity62 l Housing dimensions Dia. 460 x 710 mm InletDN25 OutletDN50 With sievecheck 0,3 mm With mechanical sealcheck With jacketcheck Motor70 kW (400 V, 450 rpm (Ex)) Rotor speed450 rpm Without ballscheck Information Mounted on framecheck With switchcheck Weight3500 kg Floorspace2,20 x 1,00 m Total height2,20 m ATEX compatiblecheck Extra SpecificationsCooling on sieveSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wo ...

General SKU299U731 LocationBarneveld MakeDrais TypePM-DCP 3-45 No.54238 Year of construction1991 Pressure Working pressure3 Bar Main Features MaterialChromed steel Volume12 Ltr. Motor45 KW Specified Features - Sand mill MaterialChromed steel, Stainless steel 1.4462 (318LN), Tungsten Vertical sandmillcheck Capacity12 Ltr. Housing dimensions dia. 365x400 mm Inlet25 mm Outlet19 mm With mechanical sealcheck With jacketcheck (9+5 Ltr.) Max. temperature98 °C Motor45 kW, 380/220 Volt With variable speed drivecheck Information With switchcheck Weight2000 kg Floorspace1,5x1,05 m Total height2,1 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

General SKU248T375 LocationBarneveld MakeBühler TypeSDVE-1300 No.10208388 Year of construction1996 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill MaterialMild steel, Stainless steel Three roll millcheck Roll diameter400 mm Roll width1300 mm Motorcheck Landert, 75 kW, 400 Volt With variable speed drive1800 rpm Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck Information Total height1600 mm Weight4452 Kg Floorspace2560x1700 mmThree roll millsBühlerMills > Three roll millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU294T680 LocationBarneveld MakeDraiss TypePM SUPERTEX 30 No.56367 Year of construction2001 Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity31 Ltr. Housing dimensions dia. 240x640 mm Inletdia. 24 mm Outletdia. 24 mm With mechanical sealcheck With jacket7 Ltr. Max. temperature70 °C Motor22 kW 400 Volt With variable speed drivecheck Information Mounted on framecheck With switchas is Weight1250 kg Floorspace1,6x0,9 m Total height2 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, Th ...

General SKU294T684 LocationBarneveld MakeDraiswerke TypePMH-25-TEX No.53860 Year of construction1990 Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Capacity25 Ltr. Housing dimensions dia. 235x700 mm InletDN25 OutletDN25 With mechanical sealcheck With jacket10 Ltr. Max. temperature98 °C Motor22 kW 400/690 Volt Without ballscheck Information Total height1,8 m Weight1400 kg Floorspace1,7x1 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU383U1043 LocationBarneveld MakeNetzsch TypeMastermill 3 No.2404563 Year of construction2015 Main Features MaterialStainless steel Volume10 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 Vertical sandmillcheck Basket Mill Capacity9 Ltr. Housing dimensions Dia. 220x250 mm InletDia. 220 mm With sievecheck With jacketcheck Motor2,2 kW With variable speed drivecheck frequency converter Rotor speed1100-3000 rpm With ballscheck Information With switchgearcheck (as is) Total height1,2 m Weight630 kg CEcheck Floorspace1,2x0,9 m ATEX compatiblecheck Extra SpecificationsDrive power mill, 2,2 kW, drive power stirrer 0,75 kW, mill speed 1100-3000 rpm, mixer speed 180-2600 rpm, basket volume 0,5 ltr, :Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in wo ...

General SKU405W1264 LocationBarneveld MakeWab Bachhofen TypeKD5 No.780343 Year of construction1978 Main Features MaterialStainless steel Volume5 Ltr. Motor12.5 KW Specified Features - Sand mill MaterialStainless steel 1.4000 (410S) Sand mills Ball millcheck Capacity5 l. (4,3l.) Drum sizesdia. 200x320mm InletDia. 35mm Outletcheck Motor12,5 kW, 380 volt, 2930 rpm (EX) Speed2344/1933/1640/1172 rpm Information With switchcheck Weight440 kg Floorspace1,00x0,80 m Total height1,5 m ATEX compatiblecheck Extra Specificationsperipheral speed agitator disks: 15/13/10/8 m/sekSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit ...