cutting machine used for sale

Max. die-cut size: 230 x 230 mm (23x23cm) Min. die-cut size : 10 x 10 mm (1x1 cm) Max. Stack Height : 170 mm (17cm) (Height of cutting die 60 mm) Die-Cutting pressure : 5.700kg Die-Cutting strokes max: 11 p/min Max. machine output 660.000 sheets/h (feeding 1.000 sheets, label paper 80 gsm) Weight: 855 kg Very good condition

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

KT7 CNC KRP 150 X 300 SILVER plasma cutting machine built in Poland in 2019, offers its user fast and precise machining of sheet metal weighing up to 4 tonnes. The compact design and all components of the machine have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. For cutting workpieces, the machine uses a fully automatic torch with a special Torch Sensor Control (TSC) system, which prevents damage to a torch during operation. The KT7 CNC plasma cutting machine is also equipped with an integrated control module with SheetCAM CAM software and additional functions to improve the machine’s operation. Technical data of the KT7 CNC KRP 150 X 300 SILVER plasma cutting machine - work table surface (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110-270 mm - polished slats and gears - ball convey ...

CORMAK PW-1530 AST 1500x3000 plasma-gas cutting machine was manufactured in 2020 in Poland. The machine characterised by its simplicity and ease of use, is used in the cutting process of shapes in workpieces with a maximum thickness of 60 mm. The machine’s work table, made of lightweight aluminium profiles with interchangeable comb bars, is equipped with a two-section extraction system that effectively eliminates contaminants generated during the cutting process. The PW-1530 AST cutting machine ensures excellent cutting accuracy and high repeatability, thanks to a THC voltage height adjuster designed for precise adjustment of the distance between the torch and the sheet metal during processing. The machine’s extensive equipment includes a camera mounted at the torch for easier positioning from further down the table, a SHERMAN CUTTER-130 CNC plasma source and CAD/CAM FastCAM softw ...

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...

Mazak OPTIPLEX 3015 NEO 10kW Beam Shape Laser Cutting Machine + Automation Loading and Unloading System with 8 Regall Bearing Locations CST3015 Publisher: Mazak Type: OPTIPLEX 3015 NEO 10kW Beam Shape Year of construction: 11/2022 Commissioning: 05/2013 Condition: New, Exhibition Machine Availability: Immediately, by arrangement Operating hours (as of 01.2024): – CNC Power On Time approx. 636h – Laser Power On Time approx. 287h – Auto Operation Time approx. 60h – Auto Cutting Time approx. 19h – Cutting time approx. 17h Scope of delivery complete incl. installation and commissioning (Mazak Germany): – Basic machine with laser resonator Beam Shape CFX-10000 (10kW) – Built-in nozzle camera – Conveyor belt for material scrap – Zus. Laser protection screen (side 1) – Zus. Laser protection screen (side 2) – Oil mist mist – Roller lift table (ma ...

BYSTRONIC BYSTAR 3015 4.4 kW laser, manufactured in Switzerland in 2012 is designed for cutting metal sheets made of black steel, stainless steel and aluminium. Workpieces with a maximum thickness of 25 mm (black steel), 20 mm (stainless steel) or 12 mm (aluminium) are machined with the highest precision and quality, using a 4.4 kW laser beam emitted by a reliable BYSTRONIC ByLaser 4400 laser source. The laser cutting machine is characterised by a large working area made of high-quality steel, with a length of 3000 mm and a width of 1500 mm, allowing for easy loading of workpieces with a maximum weight of 890 kg and ensuring high stability during the cutting process. The machine is controlled via an arm-mounted control panel with installed BYSTRONIC ByVision numerical control. The laser has been continuously repaired – the following components have been replaced during the use of ...

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...

Key data: 4000 mm, 2000 mm, 4400 W

BYSTRONIC ByStar 4020 laser cutting machine was built in 2006 in Switzerland. The machine, designed to cut workpieces made of among others stainless steel and aluminium, uses a laser beam with a power of 4.4 kW and a thickness of just a few μm, which guarantees the highest precision and energy efficiency at low operating costs. Laser cutting of workpieces with a maximum thickness of 25 mm takes place on a stable work table designed to provide unobstructed operator access to the workspace. After machining, the edges of the workpieces are distinguished by their unparalleled smoothness and absence of irregularities. The BYSTRONIC laser cutting machine is offered complete with equipment consisting of among others a BYSTRONIC CNC controller, a dust extraction unit and an EF COOLING cooling unit. The total weight of the machine is 18300 kg. Technical specifications of the BYSTRONIC BySt ...

ECKERT SZAFIR BL2 3D plasma-gas cutting machine was manufactured in Poland in 2016. The plasma cutting machine uses a plasma beam generated by a highly efficient KJELLBERG Smart Focus 200 aggregate with a power of 200 A to precisely cut workpieces made of mild steel, stainless steel and aluminium. Stability during machining is ensured by the machine’s high-quality steel portal, which was additionally extended by 700 mm to allow easy loading and unloading of larger metal sheets. The plasma-gas cutting machine guarantees a high level of safety and operator comfort, thanks to a sectional extraction table with a length of 6000 mm and a width of 2000 mm, which is used to eliminate the dust produced during cutting. The plasma-gas cutting machine is also equipped with among others a CNC ECS 872 controller with a 15″ touchscreen, a WALTER SKTG 11 P COMBO screw compressor and a WALTER WDF  ...

MOST SPEEDCUT 15/30 plasma-gas cutting machine was built in 2018 in Poland. The machine used for professional production needs, performs precision cutting of metals with a maximum weight of 4 tonnes using a fully automated torch. The torch uses a special system to protect the torch from damage, which combined with the fully galvanised, single-module design of the machine guarantees long and trouble-free operation throughout its lifetime. The SpeedCUT 15/30 CNC cutting machine weighs 1500 kg Technical specifications of MOST SPEEDCUT 15/30 plasma-gas cutting machine - work table dimensions (L x W): 3000 x 1500 mm - travel speed: 25000 mm/min - working speed: up to 10000 mm/min - Z-axis feed range: 110 mm - maximum workpiece weight: 4000 kg - table type: waterbed table (stainless steel tub) - power supply: 230 V; 50 Hz - dimensions (L x W x H): approx. 3600 x 2050 x 1650 mm - we ...

TRUMPF TRUMATIC L3030 laser cutting machine manufactured in 2005 in Germany, provides efficient laser cutting while maintaining low operating costs. To machine workpieces, the machine uses a stable 2 kW laser beam, which, guided by a mirror system, achieves extremely smooth and even edges over the entire cutting length. The head and mirrors are mounted on movable components. The TRUMPF laser cutting machine also boasts an extremely stable and rigid work table with a large surface area, which is additionally equipped with an integrated automatic pallet changing system. This solution allows for simultaneous loading and unloading of workpieces during the machining process, which significantly increases production efficiency and reduces machine downtime to a minimum. All this makes the TRUMATIC L3030 laser ideal for even the most demanding applications in any production facility. The tota ...

WaterJet OMAX GlobalMAX 1530 was built in 2019 in the United States. This high-quality machine with an indestructible design uses reliable components and innovative jet cutting technology to guarantee clean and precise workpiece edges, regardless of the machined material. The OMAX water cutting machine was first commissioned in 2020 and has so far only worked for 260 hours. The GlobalMAX 1530 water cutting machine machines workpieces made of e.g. steel, glass and plastics on a large work table which maintains high stability even during the heaviest loads. The machine’s easy-to-reach design offers unobstructed access to a working area with a length of 3100 mm and a width of 1645 mm from all four sides, significantly facilitating the process of loading and unloading workpieces. All axes are equipped with innovative OMEGA DRIVE brushless servo motors with feedback loop, which minimise  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded cons ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...

The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...

Key data: 3000 W, 1500 , 3000

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 1kW / VF1530-1000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 1.0kW - Energy requirements: 12.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Stainless steel: Recommended thickness 4.0mm, maximum thickness 5.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 3.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0mm Structure parts Th ...

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

ECKERT AGAT SPEED plasma-gas cutting machine was built in 2011 in Poland. The machine is used for precise cutting of pre-programmed elements in metal sheets with a maximum thickness of 45 mm (plasma cutting) or 100 mm (oxygen cutting). The main feature of the plasma cutting machine is its open structure, made of high-quality welded steel, allowing easy loading and unloading of the workpiece on the work table from either side. To increase the comfort of the machine operator, an extraction table has been installed to eliminate the contamination generated during the cutting process. The high speed of feeds, reaching up to 10000 mm/min, guarantees a significant reduction in machining time. The plasma cutting machine is also equipped with a modern ECS 872 CNC controller and a control panel, as well as a reliable KJELLBERG PA-S45 W plasma source ensuring the highest quality and precision ...

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

Key data: 6500 mm, 2000 mm, 6000 W

BYSTRONIC BySprint FIBER 6520 fiber laser was manufactured in 2016 in Switzerland. The extremely high-tech machine achieves the highest productivity and precision in cutting thin metal sheets made of among others carbon steel, copper and brass, thanks to the use of innovative fibre optic technology. The workpieces are cut by a specially designed cutting head with an integral capacitive sensor that receives a high-quality beam with a power of 6 kW. The ByPos Fiber function adapts the focal length to the material and production range, resulting in extremely smooth edges without any irregularities. Designed for maximum user comfort, the laser cutting machine design features a large work table of 6500 length and 2000 mm width with micro-welds to support small, long and thin parts. The entire work area also features a special protection system designed to provide the user with a high level ...

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

ECKERT AGAT SPEED gas cutting machine was manufactured in Poland in 2014. The machine designed for precision cutting of metal sheets with a maximum thickness of 100 mm is distinguished by a high-quality portal with an open structure, ensuring excellent stability during the performed cutting process and free access of the operator to the working space. The contamination generated during the cutting process is continuously removed by a sectional extraction table covering the entire working area of the machine. The ECKERT gas cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller and an oxygen torch support with capacitive distance sensor. Technical data of the ECKERT AGAT SPEED CNC cutting machine - CNC control: ECS 872 - maximum workpiece thickness: 100 mm - work table surface (L x W): 3000 x 2000 mm - oxygen torch support with capacitive dis ...

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

TRUMPF TruLaser 3030 FIBER laser cutting machine was manufactured in 2014 in Germany. The machine uses state-of-the-art fibre cutting technology for the precise machining of structural steel, stainless steel, aluminium and copper sheets, which guarantees smooth and even edges without any splintering. Thanks to the DetectLine package, which automatically measures the cut crest of the focal point and precisely determines the position of the focal point and the position of the sheet, it is also possible to perform very accurate additional processing of previously cut parts. The TruLaser 3030 FIBER (L49) laser cutting machine is equipped with the reliable TRUMPF TruDisk 3001 disk laser with a power of 3000 W. The energy-saving pulse function and intelligent power management generate a high-quality beam with simultaneously low operating costs and reduced power requirements. Cutting of work ...

TRUMPF TruLaser 3030 laser cutting machine was manufactured in 2011. The machine is equipped with modern components to provide precise cutting of workpieces made of mild steel, stainless steel and aluminium. High stability during processing is ensured by the steel body on which a state-of-the-art SIEMENS SINUMERIK 840D CNC controller is mounted for programming operating modes and control of the cutting process. The TruLaser 3030 Basic Edition laser cutting machine cuts metal sheets with a maximum weight of 900 kg and a thickness of 20 mm (mild steel), 12 mm (stainless steel) and 8 mm (aluminium) using a 3.2 kW laser beam, guaranteeing high precision and smooth and even workpiece edges. The laser is also equipped with an automatic pallet changing system. The total weight of the machine is 11500 kg. Technical data of the TRUMPF TruLaser 3030 laser cutting machine - CNC control: SIEM ...

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

SENTE MAKINA PLSS 3X1.5 plasma cutting machine was built in 2015 in Turkey. Distinguished by its ease of use, stable construction and large working area, the machine is used in even the most intensive machining of stainless, galvanised and aluminium sheets. The control panel designed for operating the plasma cutting machine has a specialist CNC controller with the ability of importing programmes in DXF format, which optimises the machining process and ensures economical cutting regardless of the machined material. During its operation, the machine underwent regular servicing and upgrades, during which, among others, the grate was replaced. The SENTE MAKINA plasma cutting machine weighs 980 kg. Technical data of the SENTE MAKINA PLSS 3X1.5 CNC cutting machine - CNC control: SENTE MAKINA - work table dimensions (L x W): 3000 x 1500 mm - grate work area (L x W): 3170 x 1500 mm - plas ...

BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...

-Exhibition Machine- The SUPERA-3015 A laser cutting machine is a general-purpose type with fiber laser. It offers high dynamics in high-speed cutting of thin sheets and they have the technology and know-how on board to produce stable and constant parts even for thicker material, where the maximum thickness is limited only by the output power of the laser. Standard equipment A SUPERA 3015 comes with the following standard equipment: An automatic shuttle table for an almost continuous cutting process Two cutting tables with support in the grid Boxes for scrap and dust removal under the working area of the machine KEBA – LTI control with virtually unlimited program memory Built-in laser pulse generator 21.5" touch screen operator panel with graphical user interface Mouse and keyboard Cutting head for fiber laser source Automatic selection of the gas valve to support two d ...

MAZAK SUPER TURBO X510 Hi PRO Supercharged laser cutting machine manufactured in 1999 in Japan, is designed for precision cutting of sheet metal made of structural steel, stainless steel and aluminium. The compact design with high stability makes the machine ideal for small factories as well as for series production. The MAZAK SUPER TURBO-X510 Hi-PRO Supercharged laser cutting machine has a large work table with a length of 3050 mm and a width of 1525 mm on which ball supports are used to facilitate the loading and unloading of workpieces. Workpieces with a maximum thickness of 20 mm are machined with the utmost precision using a stable 2 kW laser beam, guaranteeing excellent machining results. The machine is equipped with, among others, a MAZATROL CNC controller and SiCam 14.10 software for programming the cut shapes and generating the necessary files. The total weight of the machine ...

KIMLA POWERCUT LF 1530 4 kW fiber laser for tubes and sheet metal was built in 2021. The reliable machine, built on a rigid monolithic body, uses advanced fibre technology to cut workpieces with a maximum weight of 900 kg. The 4 kW high-quality fibre optic beam fed directly to the cutting head expands the machining possibilities and guarantees the user very smooth and even edges. The high-quality steel work table with precise mechanical locking stiffens the pallet during cutting, ensuring that the workpiece remains stationary and secure while cutting in the X, Y and Z axes. In order to ensure that the cutting process is uninterrupted, the KIMLA laser cutting machine is also equipped with an automatic pallet changing system which allows workpieces to be loaded and unloaded at the same time, without interrupting the production process. The POWERCUT LF 1530 fibre laser cutting machine ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. Th ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OR 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construct ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6035 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-C2 6kW / VF2560-6000W Specifications - Maximum sheet size: 6000x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Maximum load: 6000kg - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm - Brass: recommended thickness 10.0mm, maximum thickness 12.0mm Structure parts  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-CT2-6022 6kW Specifications - Maximum sheet size: 6050x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Maximum load: 3840kg - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 14580mm - Width: 4300mm - Height: 2350mm - Weight: 16800.0kg Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm - Brass: recommen ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6012 1,5kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 1.5kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-TA-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service yo ...

PRIMA POWER PLATINO 1530 laser was manufactured in 2001 in Italy. The machine is designed for cutting metal sheets made of structural steel, stainless steel and aluminium. The processed sheet may be up to 15 mm thick (structural steel), 8 mm thick (stainless steel) or 5 mm thick (aluminium). The feed rates in the X/Y/Z axes are 3000 mm (X axis), 1500 mm (Y axis) and 140 mm (Z axis) respectively. The laser cutting machine is equipped with a high performance ROFIN SINAR SLAB DC025 resonator with a power of 2500W, created for fast and precise cutting in metal sheets and guaranteeing the highest quality of cut elements. The installed PRIMACH 20L CNC control allows memorising many different work programmes and controlling every aspect of machining. The machine is offered with a wide range of equipment, including: CAD/CAM software SiCam v14 (license for one workstation) and post-processo ...

SPIRO 6000V4 plasma cutting machine built in 2016 in Switzerland, performs ideally in medium and large industrial plants during the industrial production of parts made of steel sheets and non-ferrous metals. To ensure high cutting performance even during the most intensive machining, the extended work space based on a stable design allows simultaneous cutting and unloading of finished products without interrupting machine operation. The SPIRO CUTLASS 6000 plasma cutting machine is operated using the high-speed Spiro HS Controller with a complete library of parametric models and shapes. Technical specifications of the SPIRO 6000V4 plasma cutting machine - work table area (L x W): 6000 x 1500 mm - maximum workpiece thickness (galvanised steel): 6 mm - maximum workpiece thickness (black steel): 6 mm - maximum workpiece thickness (stainless steel): 6 mm - maximum workpiece thickness  ...

BYSTRONIC Byspeed 3015 laser cutting machine was built in Switzerland in 2004. The machine equipped with an extremely reliable BYSTRONIC Bylaser 4400 laser source with a power of 4.4 kW, performs the cutting and engraving process on workpieces with a maximum thickness of 25 mm (structural steel), 20 mm (stainless steel), 12 mm (aluminium) and 3 mm (brass, copper, titanium). Workpiece machining is performed on a large work table with a length of 3000 and a width of 1500 mm, allowing free access to the laser’s work area and for loading larger-size sheets weighing up to 890 kg. The control panel with BYSTRONIC ByVision CNC controller for programming the machining parameters has been placed on the arm to increase the machine operator’s comfort. Characteristics of the BYSTRONIC Byspeed 3015 laser cutting machine - maximum laser power: 4.4 kW - wavelength: 10.6 μm - laser beam di ...