cutters and vacuum used for sale

cutting range for steel to: 0,5 - 120 mm capacity at 100%: 440 A mm cutting medium: PerCut 451 dimensions: ca. 1030 x 680 x 1450 mm weight: ca. 600 kg Contour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the material The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 12 ...

Polar 92 E Year of Make: 2000 E version, air table, 2x side tables Formica large, Spare blade. Immediately available!

Polar 66 E Year of Make: 2007 E Version Spare blade Very good condition - little used! Immediately available

Key data: 2 , 1300 mm

Copy milling machine Longitudinal copy milling machine Wigo Automatic Double Copy Milling Machine Type: 1075 For milling 2 opposite sides, including rounding of the front Maximum working length for workpieces with straight ends: 1300 mm Maximum working length for workpieces with rounded ends: 1000 mm Working width maximum 200 mm Processing height 90 mm, including milling heads 90 mm 2 milling motors motor power approx. 5 kW Spindle diameter 30 mm With thrust rings Continuous table feed 0.5 – 12 m/min Hydraulic motor feed 1.1 kW Return speed 25 m/min. Speed of the milling spindles optionally 7500/9000 rpm. Tool diameter maximum 120 mm 4 pneumatic clamping cylinders from above Operating pressure max. 6 bar Weight approx. 900 kg Dimensions approx. 3200 mm x W 1200 mm x H 1600 mm It is particularly suitable for precise and serial processing of symmetrical wo ...

Table dimensions: 1300-800 mm Weight: 4,7 to. Year: 1979 x-travel: 1000 mm angular milling head: ja documentation: ja serial number: 733 weight of the machine ca.: 4,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flaker Laska -Type: GFS 510 -Power: 18.5 kW -Capacity: up to 4000 kg/h -Operating temperature: up to -15°C -Block size: 500 x 300 mm -External dimensions: 1830 x 1900 x 2050 mm -Power supply: 380V 50Hz 3Ph -Weight: approx. 1400 kg -Made of stainless steel -Condition: Used in very good condition, ready to work

Manufacturer: Trotec Model: Speedy 500 C200 Year of Manufacture: January 2013 Technical Specifications - Input Power: 3x400VAC+N+PE, 7.2A, 50Hz - Nominal Power: 4.5 kW - Laser Type: CO2, 200W continuous wave, 10.6 micrometers wavelength - Laser Diode: less than 0.99 mW continuous wave, 655nm - Wiring Diagram: SP500_200W_V1.0 - Safety Standard: EN 60825-1 (2007) Find more here - .ucymachines/ Contact us at - sales@ucymachines

width 78 cm Age 2007 computer control with monitor Touch Screen air table 2 side tables Delivery time: Immediately Ref: PO250119A

WOHLENBERG 44 FM 50 -Year 1989, totally rebuilt in 2019 -3 knives trimmer -Height of staples: up to 100 – 125 mm -Mechanical speed: 20 – 50 staples/min -Format in operation without automatic feeding: -Max. untrimmed 315 x 460 x 80 mm -Minimum Book Size: 70 mm x 80 mm -Maximum Book Size: 300 mm x 44 0mm -Automatic infeed -Offcut blower -Central lubrication -Equipment for changing the format -many set of clamp plates & plate holders -1 set of knives -Machine full and complete in very good working conditions -Totally refurbished with all new electric cabin -Touch screen control for all the functions -Tec-Graf automatic pre-stacker, counting and feeding station -Connection belts between pre-stacker and the three knives trimmer -Available immediately

Weight: 1,3 t turning length: 40 mm cylinder: 0-0,5 rapid traverse: 3,7 m/min reus: U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital program Central air table CNS chromed tables Light guards 2 Knives Tools, manuals with electrical diagrams etc. Complete cleaned, checked and tested

THREE KNIVES TRIMMER KOLBUS MD 155 -Year 1985 -Max untrimmed length 320 mms. /Max untrimmed width 460 mms -Min untrimmed length 11 mms. /Min untrimmed width 12 mms. -Max trimmed length 31 mms. / Max trimmed width 44 mms. -Min trimmed length 10 mms. / Min width 11 mms. -Automatic book infeed -Control cabin -Max speed 45 books/min -Three set of knives -Tools, accessories, in good working conditions

round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 10 kg Year: ca. 2009 : x Table dimensions: mm Motor output: kW Spindle diameter: mm reus: U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Trumpf GmbH, Germany Model: TruLaser 5040 Year of Manufacture: 2007 Type: CNC laser cutting machine Technical Specifications - Laser output power: 5,000 W - Mains voltage: 400 V / 50 Hz - Connected load: 105 kVA - Control voltage: 24 V - Required fuse protection: 3 x 160 A - Compressed air connection: 7 to 10 bar - Nitrogen connection (N2): 30 bar - Oxygen connection (O2): 20 bar CO2 Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 1150 mm y-travel: 350 mm z-travel: 500 mm table surface area: 1500x380 mm turning speeds: 42-1400 U/min spindle taper ISO: 50 tool clamping electrical: bore stroke: 110 mm total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m 9 kW, Diagram No.: 152.29.80.20, with control panel, control cabinet, plastic sideboard, operator mat, and hydraulic vice The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by a ...

Table dimensions: . mm Motor output: 9 kW Spindle diameter: . mm reus: U/min Weight: kg Year: 0 9 kW, Diagram No.: 152.29.80.20, with control panel, control cabinet, plastic sideboard, operator mat, and hydraulic vice The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: . mm Motor output: . kW Spindle diameter: . mm reus: 100 - 1500 U/min horizontal: . The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 30 mm square edge steel: 25 mm L-beam: 28 x 10 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: - mm square edge steel: - mm L-beam: - mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,212,35 m div. punches and dies Foot switch Spare blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mm square edge steel: 45 mm L-beam: 150 x 14 mm total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,3 x 1 x 2,1 m No. 3418 5-fold combined profile steel shears with flat steel shears PEDDINGHAUS 210 Super 16 pressure capacity 80 to Round steel 50 mm Square steel 45 mm angle steel 150 x 14 mm Punching up to 90 mm diameter 5.5 HP Space requirement 2.30 x 1.0 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

puncher: 70.0 t square edge steel: 45.0 x 45.0 mm round bar steel: 45.0 mm L-beam: 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.): Ø 27.0 x 20 mm shear: flat material: 450 x 15 / 300 x 20 mm throat: 300 mm work stroke: 70.0 mm work height max.: 1095 mm total power requirement: 9.0 kW weight: 1925 kg range L-W-H: 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripper - side storage options - 2x freely movable foot switches - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector The data for this ad was cre ...

Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type Frozen Meat Slicers / Guillotines Height 1750 mm Width 1100 mm Length 2550 mm Electrical Supply: 400V 50Hz 3N Main Material Stainless Steel, Acid Resistant Description Working width 500 mm

Manufacturer: STM Model: 4020 PremiumCut Type of Machine: Waterjet Cutting System Year of Manufacture: 2013 Condition: Used, Fully Functional Operating Hours: approx. 10,700 h Technical Specifications: - Effective cutting area: 4000 x 2000 mm - Heavy duty slats for workpieces up to 1,000 kg per square metre - CNC control NUM Axium Power, up to 30 m per minute - Z-axis CNC clearance height: 180 mm - Control cabinet: Premium console - Waterjet software: SmartCut - Computer with 20 inch LED monitor and splash-proof keyboard and mouse Main Components and Their Function: - Waterjet cutting valve - Abrasive cutting head - Positioning laser - Abrasive metering unit, CNC controlled, with intermediate container - Abrasive supply container, 250 kg - Abrasive minihopper system with pressure container - Double cable pull system to secure the working area - Automatic Abrasive Rinsing System: ...

Colour display, air table refined, air conveyor tables 100 x 100 cm (l. + right), air corners (l. + right), 2 knives

IDEAL 1080 Lever Shears with Material Knife Cutting length 800 mm Year of construction 2016 Serial Number 1166252 Additional set of material knives with cutting rail

Chain milling machine on its own stand with various accessory components (b. Chains and Swords)

Manufacturer: TRUMPF Model: TruMatic 7000-1300 Type of machine: Punch and laser cutting combination machine Year of manufacture: 2009 Technical Specifications: - Operating hours, machine: 53,608 h - Operating hours, laser on: 48,375 h - Operating hours, beam on: 9,876 h (as of 23.10.2017) - Laser power: 4000 Watt - Max punching force: approx. 220 kN - Working area, laser operation: approx. 2540 x 1280 mm - Working area, punching operation: approx. 2540 x 1370 mm - Control system: Bosch MTX compact - Max sheet thickness: 8mm - Floor space required: approx. 7950 x 6700 mm - Machine weight: approx. 23,000 kg - Total connected load: 87 kVA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: BLM Group Adige Model: LT Fiber Type of Machine: Fiber Laser Tube Cutting Machine Year of Manufacture: 2016 Condition: Works well and is currently in production Operating Hours: 37,169 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Trotec Model: SP500 Type of Machine: CO2 Laser (Engraving and Cutting Machine) Year of Manufacture: 2014 Technical Specifications: • Measured 250 watts of power for engraving almost all materials and cutting, for example,up to 20 mm acrylic glass or poplar plywood • Fastest housing laser in its class with a nominal speed of 254 cm/sec • Extra-large work area 1,245 x 710 mm, pass-through for oversized parts • Includes 3 interchangeable worktables for cutting and engraving applications • Includes 5-piece lens set for various applications Maintenance History: • Power supply renewed in 2022 • Laser source refilled in 2026 • Servo motors renewed in 2026 • Maintenance service 2026 Software and Support: Includes operating software and lifetime telephone support. Included Components and Their Function: • Vent500 exhaust system with 2.2 kW / 1,20 ...

Profile steel shears, 80/110, Mas. No. 4423251690035 See photos

Manufacturer: Bordor Year of Manufacture: 2023 Model: P3 Type of Machine: Laser Cutting Machine Laser Source: 6kW Technical Specifications: - Working Area: 3048mm x 1524mm - Max Linkage Speed: 200m/min - Max Acceleration: 4.0G - Table Load Bearing: 1050kg (1-4kw) / 1450kg (more than 6kw) - Machine Overall Dimensions: 8840mm x 2240mm x 2520mm - Overall Weight: plus or minus 6500kg - Z Axis Travel: 350mm - Positioning Accuracy: 0.02mm - Total Power Capacity/Current with 40KW MAX source: 264.6KVA / 402.0A - Total Power Capacity/Current with 30KW MAX source: 204.0KVA / 310.8A - Total Power Capacity/Current with 20KW source: 141.9KVA / 217.1A - Total Power Capacity/Current with 12KW source: 95.1KVA / 144.4A - Total Power Capacity/Current with 6KW source: 60.3KVA / 91.6A - Total Power Capacity/Current with 3KW source: 44.6KVA / 67.7A - Total Power Capacity/Current with 2KW  ...

in round design, mainly from the manufacturer SECO Auction-ID: A7-49089-19

in different sizes and designs mixed with taps and normal milling cutters Auction-ID: A7-49089-8

Manufacturer: LMlab Model: Bodor i5 (Laser Welding-405) Type of Machine: Laser Welding Machine Year of Manufacture: 2021 Technical Data: - Work Surface: 1300 x 900 mm - Stroke Length X: 1300 mm - Stroke Length Y: 900 mm - Stroke Length Z: 75 mm - Positioning Accuracy X/Y-axle: 0.03 mm - Repeat Accuracy: 0.02 mm - Max Movement Speed X/Y-axle: 60 m/min - Max Acceleration X/Y-axle: 0.6 G - Load Capacity: 250 kg - Protective Enclosure: Class 1 m. laser safe inspection windows - Laser Effect: 1 kW to 4 kW (step of 1 kW) - Total Power Consumption: 1 kW laser = 16 kW, 2 kW laser = 22 kW, 3 kW laser = 27 kW - Electricity Supply: 3-Phase plus earthing, 400V, 50-60Hz - Total Size (L x B x H): 2.3 x 2.2 x 1.85 m - Automatic alternating shuttles, electric driven, with position control, and with its own separate HMI Usage Data: - First Run Time: 2023-10-23 22:01:36 - Total Run T ...

Manufacturer: Model: Bodor i7 Type of machine: Laser Cutting Machine Year of manufacture: 2021 Technical data: • Work surface: 1500 x 1000 mm • Stroke length X: 1500 mm • Stroke length Y: 1000 mm • Stroke length Z: 75 mm • Positioning accuracy X/Y-axle: 0.03 mm • Repeat accuracy: 0.02 mm • Max. movement speed X/Y-axle: 60 m/min • Max. acceleration X/Y-axle: 0.6 G • Load capacity: 300 kg • Protective enclosure: Class 1 with laser safe inspection windows • Laser effect: 1 kW to 4 kW (step of 1 kW) • Total power consumption: 1 kW laser = 16 kW, 2 kW laser = 22 kW, 3 kW laser = 27 kW • Electricity supply: 3-Phase plus earthing, 400V 50-60Hz • Total size (L x B x H): 2.65 x 2.3 x 1.85 m Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Bystronic Model: ByStar Fiber 4020 Year of manufacture: 2018 Type of Machine : Laser center Total weight: 14250 kg Laser medium: FiberLaser Wavelength: 1060nm - 1080nm Max power cw: 6000 (Fiber 6000, 6kW nitrogen cooled) Cutting head: new advanced cutting head, cut time 5185 hrs and standby time 21753 hrs with this head as of today Available with manipulation machinery: table for sheet feeding, ABB robot, manipulator for automated material takeaway Find more here - .ucymachines/ Contact us at - sales@ucymachines

Landing surface: 50cm, see photos for more details Auction-ID: A7-49942-1041

Unused , Series: M370 ; Tool Type: Face Mill / Shell Mill , Diameter: 100mm , Number of Teeth: Z7 , Holder: W012 (32mm ) , Item No.5336921 , HPC Capable , Heavy Duty Face Mill , see photos for more details Auction-ID: A7-49942-440

Unused , Diameter: 125mm , Mount: S40 , Art.Nr: 5673226 , Model: VSM490D125Z09S40XN15 , Series: VSM490-15 , Z9 , See photos for more details Auction-ID: A7-49942-442

Unused, Diameter: 80mm , Series: M370-15 , Art.Nr: 5338918 , Mount: W012( 32mm) , Z5, HPC-capable , for more details see photos Auction-ID: A7-49942-441

Unused ; Serien.Nr: VSM490-15 ; Tool Type: Face Mill/Shell Mill ; Diameter: 63mm , Holder: S22 , Art. No. 5873222 , 5 cutting places , HPC capable, see photos for more details Auction-ID: A7-49942-439

different types, sizesLot No. 42 Item No. 04Q-25P Auction-ID: A7-49942-42

Polar N 92 Plus High Speed Cutter Age: 2013 Performance: 45 cycles/min Counter: only 529.438 cuts Working width: 92 cm Equipment: Air Side tables Chromed Air Table 18.5" color display Touch Screen Operation Automatic Programs for a highly automated Process Polar Optiknife Photocells In very good condition 2x extra knife