133,395 used machines on RESALE, but how to find them? Machine Search
Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Three-knife trimmer for ShortRun and SingleCopy Softcover products and Hardcover book blocks. The ShortRun D.09 Three-knife trimmer has extreme short change over time and no make-ready parts. Products are trimmed in two separate cutting stations, head and tail trim first and then face trim in the second station. Untrimmed : 325 x 430 mm - 92 x 122 mm Trimmed : 300 x 420 mm - 90 x 120 mm Thickness : 60 mm - 2 mm Head trim : 2 - 25 mm Foot trim : 2 - 25 mm Face trim : 2 - 25 mm Speed : up to 2,400 cycles/hour (in short run mode) - up to 1,200 cycles/hour (in single copy mode)
Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Manufacturer: MicroStep Model: MSF Compact 1501.30L Type: CNC Fiber Laser Cutting Machine Year of Manufacture: 2020 Laser Source: IPG YLS-3000-U Laser Power: 3.0 kW Working Area: 1500 x 3000 mm Maximum Material Thickness: 10 mm stainless steel Power Supply: 3L+N+PE AC 400/230 V / 50 Hz Rated Current: 20 A Weight: 500 kg Protection Class: IP 54/20 Standard: IEC 61439-1 Condition: Used Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 30 mm, 30 mm, 80 mm
Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop
used
A used cutting machine Polar 78XT Touch screen Side Tables Chrome-plated table Air table
Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Module cutter: Hobbing cutter -Type: Mod.3.5 Ø 85 mm -Hole: Ø 32 mm -Dimensions: Ø 85 x 85 mm -Weight: 1.8 kg
Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reishauer, hob cutters, 3 pieces -Type: Ø 50 mm / Ø 55 mm / Ø 62 mm -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 115/65/H70 mm -Weight: 1.3 kg
Wet cutter for roof tiles, lightweight version for use on sloping roof surfaces
Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then
Router 600 router Spindle to arm distance 600 mm Twin speed spindle drive motor with 2.2/1.5 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-90-45 degrees Vertical spindle stroke 80mm Height-adjustable table Pneumatic control of the spindle from the pedal
Polar 115 ED AT Autotrim Optionally available Jogger RA-4 Year 2007 Lift LW 1000-4 Year 1999 Transomat TR 130-EL-4 Year 2001
Height=1.79 m, Overall length= 2.96 m, Overall width= 3.35 m, Net weight= 7000 kg,
Manufacturer: Trumpf Model: Trumatic L3030 Type: TC L3030 Laser type: CO2 Laser power: 4,000 W Year of manufacture: 1999 Electrical and Utility Data - Mains supply: 400 V / 50 Hz - Connected load: 88 kVA - Control voltage: 24 V - Compressed air: 6 bar Condition and Availability The machine was in continuous production use until November 2025 and remains powered on.The resonator has been replaced once during its service life. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Cutting length: 1700mm, squeegee rubber thickness: 5-10mm, coolant consumption: approx. 0.04l/m, connection voltage: 400V, 50Hz, 3 phases, connected load: 1kW, compressed air connection: 6bar, compressed air consumption: 2.5l/min, length: 2900mm, width: 784mm, height: 1250mm, weight: 430kg. An inspection on site is possible.
Height=0.78 m, Overall length= 0.97 m, Overall width= 1.43 m, Net weight= 223 kg,
Height=0.48 m, Overall length= 0.35 m, Overall width= 0.31 m, Net weight= 26 kg,
A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement.
Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant
Max. punching capacity: 400 kN Max. shear capacity: 600 kN Punches 20 mm holes in 16 mm steel Shears on the flat steel shear to 300 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 1,500 kg
1 speed on cutting drum, Product bottom exit in 200 litre tote bins, Block size: max 530 x 530 mm, Power: 3 x 380V, 50Hz, 22kW, Dimensions: 950 x 1450 x 1900 mm
Speed: 2880 RPM, Hopper: 300 litres, Power: 3 x 380V, 50Hz, 27 kW, Dimensions: 900 x 1100 x 1550 mm
There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible.
Block size: max 1200 x 640 x 380 mm, Cutting width: 680 mm, Thickness: 10 - 60 mm, Compressed air: 6 Bar, 500 L/min., Power: 3 x 400V, 50Hz, 15kW, Dimensions: 3400 x 1300 x 2650 mm, Weight: 2500 kg
Key data: 2
Wigo Copy Milling Machine Type: 1075 1 milling motor each on the right and left 5.5 kW each Spindle diameter 30 mm Milling spindles run in the same and counter-rotation Running direction can be switched Milling process via scanning with thrust ring Working length max. 1400 mm Working width max. 210 mm Working height max. 90 mm 2 pneumatic clamping cylinders from above 2 x pneumatic side pressure with 2 straight milling heads milling height 50 mm Dimensions Length 3200 mm x W 1200 mm x H 1600 mm Weight approx: 1000 kg
round bar steel: 32 mm square edge steel: 60 x 6 mm L-beam: mm pressure: 50 t stroke: 10 - 28 mm total power requirement: 4 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 0,65 x 1, 2 x 1, 67 m Maximum pressing force 50 t FLAT STEEL SHEAR PERFORMANCE Flat steel: 150 x 15 mm or: 180 x 18 mm PERFORMANCE OF PROFILE STEEL SHEARS Steel 90°: 80 x 8 mm 45°: 50 x 6 mm Angle steel 90°: 100 x 10 mm 45°: 50 x 6 mm PERFORMANCE OF BAR STEEL SHEARS Round steel: 32 mm Square steel: 30 x 30 mm PERFORMANCE SQUARE NOTCHER: 60 x 6 mm Sheet metal up to: 10 mm Notch width: 42 mm: Notch depth: 55 mm PERFORMANCE HOLE PUNCH Punching force: 50 t Stroke: 10 - 28 mm Punches: 27 in 14 mm Projection: 155 mm GENERAL DATA Drive power: 4.0 kW Oil capacity: 40 lDimensions L x W x H: 650 x 1200 x 1670 mm Weight approx.: 840 kg Translated with DeepL.com (free version) The data for this ad was creat ...
Manufacturer: Adige Model: Lasertube LT722D Technical Details: - Laser Source: Rofin Sinar DC25 - Laser Power: 40 kVA apparent power - Minimum Bar Length: 3200 mm - Maximum Bar Length: 6500 mm - Max Bar Weight (L=6500): 100 kg - Max Bar Weight (L=8500): 130 kg - Round Section Diameter: 12 to 140 mm - Round Section Optional: 12 to 152.5 mm - Square Section Side: 12 to 120 mm - Max Circumscribed Circle: 170 mm - Minimum Side Dimension: 10 mm - Maximum Side Dimension: 140 mm - Max Side Dimension Optional: 150 mm - Max Load Saddle Capacity: 4000 kg - Power Voltage: 400 V +/- 10% - Frequency: 50 Hz - Type of Power: Three phase without neutral - Total Machine Power: 26 kVA - Enclosure Protection: IP54 - Hydraulic Reservoir Capacity: 25 l - Hydraulic Pressure: 70 bar - Pneumatic Pressure: 6 bar - Pneumatic Capacity: > 500 Nl/min - Weight L=6500 version: 9000 daN - Weight L=8500 version: 1000 ...
gebr. Carpentry machine - tenon cutter REX ZA-800 S YOC 1989 Total connected load: 17.4 kW Cross-cut saws: Motor power: 5.5 kW can be swivelled +/- 60° on both sides Side adjustment by handwheel - travel 350 mm Max. saw blade diameter: 800 mm Max. cutting height: 315 mm Suction connection: 120 + 80 mm Cutting Saw - Slotting Unit: Motor power: 9.0 kW Swivels forward 45° Height adjustment by handwheel - travel 160 mm Max. saw blade diameter: 500 mm Max. slot depth: 215 mm Extraction connection: 140 mm Settling circular saws: Motor power: top 2.2 kW / bottom 2.2 kW Complete sawing unit can be swivelled forwards up to 45° Additional double swivel (forward + backward) of the individual settling saws by +/- 30° possible Max. saw blade diameter: 450 mm Max. cutting depth: 160 mm Extraction connection: 2 x 60 mm Sliding table: Hinge can be swivelled up to ...
Manufacturer: Perndorfer Model: WSS5020/1HD18 5/1ASK Year of Manufacture: 2011 Operating Voltage: 400 VAC Frequency: 50 Hz Back-up Fuse: max. 40 A Control Voltage: 24 VDC BHDT High-Pressure Intensifier - Manufacturer: BHDT - Type: Intensifier - Max. Working Pressure: 400 MPa (4,000 bar) - Max. Flow Rate: 3.8 l/min - Manufacturing Week/Year: 47 / 2011 NOT IN WORKING CONDITION / 100 HOURS ON METER Find more here - .ucymachines/ Contact us at - sales@ucymachines
: 50 t. weight: 1,8 t hydraulic: ja round bar steel: 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: max 4000 kg/h, Block size: block length x 450 x 250 mm, Temperature: max - 25 °C, Compressed air: 6 Bar, 50 l/min, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 2100 x 900 x 1900 mm, Weight: 660 kg
Flaker Laska -Type: GFS 510 -Power: 18.5 kW -Capacity: up to 4000 kg/h -Operating temperature: up to -15°C -Block size: 500 x 300 mm -External dimensions: 1830 x 1900 x 2050 mm -Power supply: 380V 50Hz 3Ph -Weight: approx. 1400 kg -Made of stainless steel -Condition: Used in very good condition, ready to work
cutting range for steel to: 0,5 - 120 mm capacity at 100%: 440 A mm cutting medium: PerCut 451 dimensions: ca. 1030 x 680 x 1450 mm weight: ca. 600 kg Contour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the material The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 12 ...
Manufacturer: Trotec Model: Speedy 500 C200 Year of Manufacture: January 2013 Technical Specifications - Input Power: 3x400VAC+N+PE, 7.2A, 50Hz - Nominal Power: 4.5 kW - Laser Type: CO2, 200W continuous wave, 10.6 micrometers wavelength - Laser Diode: less than 0.99 mW continuous wave, 655nm - Wiring Diagram: SP500_200W_V1.0 - Safety Standard: EN 60825-1 (2007) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Polar 92 E Year of Make: 2000 E version, air table, 2x side tables Formica large, Spare blade. Immediately available!
With lifter for 200L tote bins, tool trolley and pallet of spare parts, knives and hole plates., Hopper prepared for steam injection., Capacity: max 4500 kg/h, Bowl: 570 litres, Hole plate diameter: 225 mm, Knive speed: 3000 RPM, Infeed height: 1850 mm, Vacuum pump: Elmo-F 2BV5 111 liquid ring, Compressed air: 6 - 8 Bar, 85 Nl, Water: R 1, min 2 Bar, Power: 3 x 400V, 50Hz, 200kW, Dimensions: 3850 x 2800 x 2850 mm, Weight: 5800 kg
Polar 66 E Year of Make: 2007 E Version Spare blade Very good condition - little used! Immediately available
Key data: 2 , 1300 mm
Copy milling machine Longitudinal copy milling machine Wigo Automatic Double Copy Milling Machine Type: 1075 For milling 2 opposite sides, including rounding of the front Maximum working length for workpieces with straight ends: 1300 mm Maximum working length for workpieces with rounded ends: 1000 mm Working width maximum 200 mm Processing height 90 mm, including milling heads 90 mm 2 milling motors motor power approx. 5 kW Spindle diameter 30 mm With thrust rings Continuous table feed 0.5 – 12 m/min Hydraulic motor feed 1.1 kW Return speed 25 m/min. Speed of the milling spindles optionally 7500/9000 rpm. Tool diameter maximum 120 mm 4 pneumatic clamping cylinders from above Operating pressure max. 6 bar Weight approx. 900 kg Dimensions approx. 3200 mm x W 1200 mm x H 1600 mm It is particularly suitable for precise and serial processing of symmetrical wo ...
Table dimensions: 1300-800 mm Weight: 4,7 to. Year: 1979 x-travel: 1000 mm angular milling head: ja documentation: ja serial number: 733 weight of the machine ca.: 4,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible.
width 78 cm Age 2007 computer control with monitor Touch Screen air table 2 side tables Delivery time: Immediately Ref: PO250119A
WOHLENBERG 44 FM 50 -Year 1989, totally rebuilt in 2019 -3 knives trimmer -Height of staples: up to 100 – 125 mm -Mechanical speed: 20 – 50 staples/min -Format in operation without automatic feeding: -Max. untrimmed 315 x 460 x 80 mm -Minimum Book Size: 70 mm x 80 mm -Maximum Book Size: 300 mm x 44 0mm -Automatic infeed -Offcut blower -Central lubrication -Equipment for changing the format -many set of clamp plates & plate holders -1 set of knives -Machine full and complete in very good working conditions -Totally refurbished with all new electric cabin -Touch screen control for all the functions -Tec-Graf automatic pre-stacker, counting and feeding station -Connection belts between pre-stacker and the three knives trimmer -Available immediately
A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible.
Weight: 1,3 t turning length: 40 mm cylinder: 0-0,5 rapid traverse: 3,7 m/min reus: U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
