cutter k g used for sale

SPECIFICATIONS: Feed length: 1970 mm Machinable width: 230 mm Machinable height: 110 mm Spindles: Ø 40 mm Number of Spindles: 4 Shaft drive Installed power: 16 kW Voltage: 380 V Spindle configuration: I bottom: 3.7 kW II right: 5.5 kW III left: 5.5 kW IV: top: 5.5 kW

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

General SKU251W327 MakeRKR Gebläse und Verdichter GmbH LocationBarneveld TypeK130-78/D300 Pressure Pressure buildup0.5 Bar Main Features Capacity83.33 m3/Min Motor110 KW Pressure0.5 Bar Specified Features - Blower Blowercheck Capacity75,0-83,33 m³/min Motor110 kW, 400/690 volt, 1488 rpm With air filtercheck InletDia. 300 mm OutletDia. 250 mm MaterialMild steel General No.903603/08 Year of construction2008 Mounted on framecheck Floorspace1,25x3,15 m Total height1,95 m Weight1830 kg Extra SpecificationsThis machine was overhauled in 06-2019.&:nbsp:&:nbsp:The documentation of the work carried out during the overhaul is available.&:nbsp:&:nbsp:This machine is also supplied with a sound-proof enclosure.&:nbsp:&:nbsp:BlowersRKR Gebläse und verdichter GmbHBlowers > BlowersBrand > RKR Gebläse und verdichter GmbH What you can expect from Foeth: -- Machine is in work ...

General SKU300P658 MakeKEK Kemutec Products limited (UK) No.69477MOSO6682A Year of construction1990 LocationBarneveld Main Features MaterialMild steel/Stainless steel Motor2.2 KW Length600 mm Specified Features - Rotating sieve Rotating sieve:grater: Sieve sizesdia.250mm x600mm Screw sizesdia.140mm Inletdia.160mm Outletdia.300 With inspection hatch400x230mm Motor2,2 KW, 220/380 Volt Air purged glandscheck MaterialMild steel, Stainless steel General Mounted on stainl. st. framecheck With switchgearcheck Floor space2,0x1,4 M Total height1,6 M Extra SpecificationsHousing in mildsteel Technical specs Extra informationScrew sizes: dia. 140 mmConsumer wastePowdered foodsTea, herbs & coffeeStarchBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherE-waste & metalFood additivesSugarRotating sievesAnimal feedConfection ...

General SKU242X186 MakeKEK Type4808 beta No.47805 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Width200 mm Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizesDia 200x200 mm Sieve sizesDia 200x200 mm With hopper500x500x400 mm Inlet250x120 mm OutletDia. 550 mm Motor7,5 kW, 380 volt General Mounted on mild steel framecheck Floor space1,45x0,76 m Total height0,90 m Weight320kgPowdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicKemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > Spi ...

Originates from a European pharmaceutical leader in contract development and manufacturing (CDMO). Ready for Sale in Shropshire, England. Comes with: - Groninger DTE-600 rotary table - sorter with tray loader for glass bottles - Groninger ZSB-600 bottle sorter for PE bottles - Groninger DE-100 mobile bottle elevator - Groninger AAVK 300 automatic rotary bottle sterilising - cleaning unit - Monoblock filler and capper KFVG 201 with 3-head filling station This Groninger filling line was only occasionally used for short runs – therefore it is in outstanding condition with low hours. The line is primarily a used monoblock bottle filler and capper. Working Description Maximum output up to 60 BPM (depending on the container size and capping solution) with dose size up to 260 ml. The line is suitable for: • Fill ...

Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm

Stock# UG6393 Used cutting mill by Rapid (SE) model G200-48 KURF. Mill is driven by 7.5 kW, 1470 rpm, 230-400 V, 50 Hz. Main feeding inlet has dimensions: 480 mm x 230 mm. Mill has also additional side feeding inlet for work on profiles. Rotor has bolted 12 knives, on side walls of milling chamber there are bolted two static knives. Bottom discharge via screen (10 mm) through blower, cyclone into the collection station.

Flatpile Feeder, 4 Pockets, 1 Knife, Delivery

General SKU295P584 LocationBarneveld MakeGerald Kainz Verfahrenstechnik GmbH (DE) TypeGTS-2000 No.18/027 Main Features MaterialMild steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sieve:Tumbler screening machine: Sieve surface2.6 m2 Number of sieve decks:1 Sieve sizesdia.1880mm With covercheck Inletdia.300mm Outletdia.200mm Drive excentercheck Motor4,0 KW, 400/690 Volt Sieve perforation(no sieve) Tumbler screening machines MaterialMild steel General Year of construction2018 Mounted on mild steel framecheck Floor space2,0x2,0 M Total height1,8 M Weight1150 KG Extra SpecificationsThis sieve is unusedOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent  ...

table width: 6000 mm table length: 2000 mm burner heads: 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Giardina RICHFRUITS / NEOMEC / KREMLIN Painting Line was manufactured in 2019. It features a comprehensive system for MDF or HDF boards, including dual circuit spray booths for clear and colored lacquers, designed for water-based UV lacquers. The line includes various elements like spray coating machines, drying tunnels with IR lamps, UV tunnels, and roller conveyors, all driven by KREMLIN pumps and spray guns. Contact us for more information about this machine.

General SKU413X1257 MakeGKM Siebtechnik LocationBarneveld CEcheck TypeKTS-1600/4 Main Features MaterialStainless steel Surface1.83 m2 Sizes diameter1580 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.83 m² Number of sieve decks:4 Sieve sizesø 1580 mm With covercheck Inletø 200/400 mm Outletø 200 mm Drive vibro motorcheck Motor4 kW, 400 V 1455 rpm Sieve perforation4,0/ 4,0/ 3,0/1,6 With ball cleaningcheck Tumbler screening machines MaterialStainless steel 1.4301 (304) General No.2877 Year of construction2017 Mounted on mild steel framecheck Floor space1,95x1,95 m Total height1,70 m Weight1400 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Othe ...

General SKU331W744 LocationBarneveld CEcheck MakeGWK Pressure Working pressure19 Bar Main Features Heating (medium)Electric Capacity46 KW Specified Features - Temperature control unit Temperating machinecheck Heating medium:R404A (cooling) Electric capacity64 kW With coolingcheck Capacity46 kW Temperature-25°C Tank capacity800 With pumpcheck Capacity16 m³/h Motor4 kW, 400/230 volt With temperature controllercheck MaterialStainless steel General TypeKCL100/46AZ Mach.No.20 7515 04-01 Year of construction2005 With switchcheck Floorspace3,80 x 1,75 m Total height2,35 m Weight2000 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmac ...

General SKU239N132 LocationBarneveld Make030805.1K330BG Main Features MaterialStainless steel Motor7.5 KW Width300 mm Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizes280mm Sieve sizesDia. 300mm x250mm Sieve perforation0,8mm, 10mm, 4mm Inlet175x260mm Outletdia. 520mm Motor7,5kW With extra sievescheck MaterialStainless steel General Year of construction2000 Floor space1,2x0,6m Total height0,8m Weight260kgPowdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicKek KemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries  ...

General SKU239N131 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Width300 mm Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizes280mm Sieve sizesdia. 300mm x250mm Sieve perforation1mm Inlet370x170mm Outletdia. 520mm Motor7,5 kW 380 Volt MaterialStainless steel General Floor space1,4x0,7m Total height0,8m Weight340kgPowdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicKek KemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additives ...

material width: 0400 mm coil weight: 1,50 t material thickness: mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm range of expansion ca.: 460 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand board paper mill Mfc.: JUNG KWANG, NYM Machinery, Built: TBA Stopped: 2017 Type of Machine: Multi Cylinder Mold ( easy Former ) Grade of paper: Board paper , Liner board paper Basic Weight: 180 g/m2 ~ 550 g/m2 Slice Width: 3150 mm Operation Speed: 150 ~ 50 m/ Min. Production capacity : 130 ~ 100 T / day Current condition: installed on foundation

Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible.

Cherry pit set for plums Pitting machines NewProduct descriptionManufacturer: Gustav BlickleType: MPB6 Steinloch-Dm 18 mmItem condition: NewCan be easily replaced without much effortDetails see pictures.

Used paddle mixer in acid-resistant design from Kramer Grebe type 249 with a capacity of 1500 liters.

Kroma Gutmaster 1200 for Sale – High Capacity Fish Gutting Machine, For sale: Kroma Gutmaster 1200, a high-performance industrial fish gutting machine, known in the industry as the Ferrari” of gutting systems due to its speed, precision, and reliability., Key Features:, - Capacity up to approx. 65 fish per minute (adjustable speed), - Advanced 16-step system automatically adjusts to fish size, - Suitable for multiple species (trout, mackerel, seabass, seabream, tilapia, etc.), - Precise and clean gutting with minimal manual finishing required, - User-friendly operation with automated positioning system, - Built in stainless steel for durability and hygiene, Specifications:, - Working range: approx. 0.18 – 1.2 kg fish, - Power supply: 3x400V, - Machine length: approx. 5.1 meters, - Single-operator operation, Condition:, Well-maintained and in good working condition. Can be seen runn ...

heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Kromschroder, gas pressure regulator unused OVP -Type: GDJ15R04-0 -p max.: 400 mbar -Dimension box: 110/130/H100 mm -Weight: 0.6 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: IWN RMD-53/44 / BVB-F 25/40-1 / PMV-DR 20/40-P -Individual components: see photos -Total dimensions: 450/250/H330 mm -Weight: 13.5 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Valves: airtec MS 01 / airtec MO 04 310-HN -Valves: IWN PMV-D 40/40-BL / PMV-D 25/32-BL / BVB-S 25/40-1 -Individual components: see photos -Total dimensions: 500/420/H185 mm -Weight: 18,7 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: PMV-D 25/32 BL / PMV-D 40/40 BL -Individual components: see photos -Total dimensions: 440/380/H230 mm -Weight: 11.3kg

4/3 directional valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Krämer Grebe Control block from Tiromat 3000/430 vacuum packaging system -Valves: PMV-D 40/40 BL / PMV-D 25/32-BL / BVB-S 25/40 -Individual components: see photos -Overall dimensions: 500/460/H190 mm -Weight: 19 kg

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Zebotronics servo motor stepper motor from vacuum packaging system Tiromat 3000/430 -Type SM 87.3.18.M7 -Shaft: Ø 10 x 30 mm -Number: 1x stepper motors available -Dimensions: 175/85/H110 mm -Weight: 3.7 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Oriental Motor, Vexta servomotor stepper motor from Tiromat 3000/430 vacuum packaging system -Type PH268-E1.6-A1 -Shaft: Ø 6 x 20 mm -Number: 3x stepper motors available -Price: per piece -Dimensions: 97/57/H57 mm -Weight: 0.2 kg/pc.

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Manufacturer: Kramer Grebe Conveyor belt from vacuum packaging system Tiromat 3000/430 -Strap width: 370 mm -Conveyor length: approx. 830 mm -Conveyor belt: adjustable in height, without drive -Transport dimension: 830/425/H545 mm -Weight: 28 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering -Manufacturer: KTS, heavy-duty transport trolley type DSL with steel tube attachment -Industrial trailer: with 1-axle turntable steering -unbraked, brake not functioning -Platform: intermediate size 2000/800/H605 mm -Load capacity: max 5000 kg -Tires: solid rubber -Maximum speed: 6 km/h -Brake -Trailer coupling: for industrial trailers -Number: 3 transport trolleys available -Price per piece -Total dimensions: 3690/1000/H705 mm -Dependent weight: 460 kg/pc.

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, fluid-switched multi-plate spring-loaded brake from the GSL aerial work platform -Bolt circle: Ø 160 mm M14 -Dimensions: see photos -universally applicable -Number: 2x brakes available -Price per piece -Dimensions: 220/190/H190 mm -Weight: 19kg/pcs

Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler -Stroke: 350mm -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm -Weight: 1140 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle industrial trailer with 1-axle turntable steering Type: DSL braked -Platform: 2000/1115/H600 mm, dimensions see photo technical drawing -Load capacity: max. 5000 kg -Tires: solid rubber -Trailer coupling for: Industrial trailers -Total dimensions: 3630/1115/H1540 mm -Own weight: 450 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Gossen, control plug-in cards circuit boards -Switching regulator card: Constant S83 S5 EU 12 -Plug-in card: 7204-6072C0 -Temperature controller card: Gossen Pantatherm DS 4 4400-S 8 pieces -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 5.2 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type K11R 160 L4 R -Power: 13.5 kW -Speed: 1470 rpm -Voltage: 380/420 V / 655/725 V -Shaft: Ø 42 x 110 mm -Protection class: IP54 -Number: 2x motor available -Price: per piece -Dimensions: 650/345/H415mm -Weight: 142 kg/pc.

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, single-phase power supply -Manufacturer: Günter Kirch, single-phase power supply type NGG -Power: 160 VA -Voltage: PRI 230V 50/60 Hz / SEC 24 VDC -Technical data: see photo type plate -Dimensions: 165/100/H150 mm -Weight: 4.0 kg

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Auxiliary circuit breaker, miniature circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector, NH fuse base -Manufacturer: Klöckner Moeller, adapter plate, 2 pieces, unused, original packaging -Type: A-GSTA2/50 400A -Item No.: T 8250025 -Quantity: 1x box with 2 pcs. available -Cardboard dimensions: 260/235/H115 mm -Total weight: 2.6 kg

Inkjet printers, label printers, barcode printers, printers, logistics labeling systems, inkjet printers, thermal inkjet printers, control units for inkjet printers -Handover: in its current condition as inspected -Condition: According to the display, the device needs cleaning. -Manufacturer: Keyence, inkjet printer with accessories -Type: MK-G1000 -Touch panel: MK-P5 -Individual components/accessories: see photos -Submission/Price: complete -Transport dimensions: 465/380/H630 mm -Weight: 58 kg

NH fuse-switch disconnectors, auxiliary circuit breakers, line switches, miniature circuit breakers, load break switches, load disconnectors, circuit breakers, power disconnectors, auxiliary switches, main switches, disconnectors, fuse-switch disconnectors, fuse-switch disconnectors -Manufacturer: Klöckner Moeller, NH fuse switch disconnector 250 A, unused, original packaging -Type: GSTA1 -Technical data: 250 A 660 V 3-pole IP 00 -Number: 15x NH fuse-switch disconnectors available -Price: per piece -Cardboard dimensions: 180/260/H115 mm / 250/190/H125 mm -Weight: 3.5 kg / 2.7 kg

Working width: 3200mm, roller diameter: 195mm, max. temperature: 220°C, speed: 2m/min, machine dimensions X/Y/Z: approx. 4400mm/1100mm/1500mm. Documentation available. An on-site inspection is possible.

A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible.

GRINDER, KRAMER + GREBE TYPE: WIWO200 Technical description: Serial number: 198/192 Material: Stainless steel Outlet diameter: 200 mm Power supply: 380-440 V/50-60 Hz Dimensions: 1550 x 1650 x 1700 mm

Description Angle 180 Band width 400mm Width of curve outside (distance from edge to edge) 187cm

Description with frequency converter and preset counter Machines No. 55661

Description Grieser & Kunzmann Wellendingen mobile, infinitely height-adjustable and rotatable roller table GUK RT-35 built in 1993 – overhauled -Inclined roller ruler for arch alignment -Speed adjustable -Inlet width 350mm -Power supply 220V

Description mobile 2nd folding unit GUK FA 52-4 but there is only 1 folding bag built-in ! Built in 1987 mobile, previously used on endless cutter Böwe 310 – noise protection device – cutting device high-performance cutting system Böwe 310