cut used for sale

Satronik LS 4-head oxy-cutting pantograph Plant decommissioned from the component production line for the earthmoving sector. Cutting with oxy-fuel technology on the water surface to avoid material deformations. Water type bench with scraper. Bench dimensions [mm] 3.700 x 7.700 Machine performance Useful cutting dimensions [mm] 3.000 x 12.000 Thicknesses with 1 torch [mm] 300 mm Thicknesses with 4 torches [mm] 100 mm Breakthrough [mm] 200 Cut starting from outside or pre-hole [mm] 300 Specifications from product sheet Width x Working length (A): 2.000 x 6.000 mm - approx Width x Total length (B): 3.700 x 7.700 mm - approx Total height (C): 2,100 mm Stroke height: 550 mm Feed speed: 20.000 mm / min Cutting table height: 650 mm Max no. Of torches / torches: 6

Cebora Plasma Prof 164HQC Three-phase power supply 380/400 V- 50 / 60Hz Maximum installed power 17KW Power consumption 22KVA-100% Active life 120A @ 100% Electronic continuous adjustment Max drilling thickness 25mm Max cutting thickness 35mm Weight 170 kg Dimensions 460 x 750 x 850mm It can also cut with oxy. Watter cooling noozle. Cutting table dimension : 2000x3000 but can also be extended to 2000x9000 if needed. The machine is working flawless.

TRUMPF Trumatic 3050 - 6 KW Year of manufacture: 2010 Laser power: 6 kW Working area: 3.000 x 1.500 mm Working hours: 12.932 / hour Conveyor is available. Can cut 25mm stainless, 25mm black, 15mm Aluminum. Used well maintained and clean. It is working. Maintained by Trumpf service.

The Prussiani Engineering Rio 5 waterjet cutting machine has a cutting size of 4000 2000mm, in 3 axes. The maximum cutting thickness is up to 200 mm. The waterjet cutting machine is used to cut materials such as glass, marble, steel, various metals, leather, granite, stone, rubber, fiberglass, artificial materials.

Group of processed metal - sheet Sheet thickness - 10-130 mm Sheet width - 400-3100 mm Sheet length - 2500-12000 mm Minimum part length - 200 mm Minimum part width - 150 mm Drilling direction - vertical Number of drilling heads - 2 pcs. Maximum drilling diameter in steel - 40 mm Maximum drilling thickness - 130 mm Maximum speed of longitudinal / transverse movement - 30m / min Tool magazine - 6 pieces Marking unit - 38 positions Hypertherm plasma cutting unit - up to 32mm clean cut low alloy steel

Technical data: • work table measuring 3000 mm x 1500 mm, • maximum thickness of the cut element - 20 mm, • maximum cutting speed - 200 m / min, • maximum acceleration - 20 m / s2, • innovative fiber laser technology - very good BPP beam parameters, • fully automatic cutting, • automatic work table replacement system • fast collision prevention system, • integrated belt conveyor system for discharging the generated waste. Range of processed materials: • stainless steel - up to 12 mm thick, • black steel - up to 20 mm thick, • aluminum - up to 10 mm thick.

For sale a little used machine designed for cutting metal, sheet metal, stone by pressurized water. numerically controlled (CNC) Producer: KIMLA MOTOR HOUR COUNTER ONLY - 3,046.7 Year of construction: 2015 Technical specifications: Working range: 2050 x 6050 mm Cutting thickness: up to 200 mm Pump: HYPERTHERM HIPRECYZJA 75S • 56 kW pump power by ACCUSTREAM - USA • Maximum pump pressure 4150 bar • Pump expansion system reducing pressure during the journey and after turning off the pump • Cutting head drive AC servo drives with digital encoders. • Two-sided Y axis drive, One-sided X and Z axis drives • Maximum travel speeds: X, Y, Z axis - 20m / min • The range of motion in the Z axis - 200 mm • Permissible table load 15 kN / m2 • Galvanized bathtub • Material supporting truss made of galvanized steel • Opera ...

PRICE REDUCED Sept 2023, we need the space for a new machine Please talk to us if you are interested in this machine as it is possible to negotiate as we need the space for a new machine Abrasive waterjet systems excel at three-dimensional cutting, and Flow manufactures a complete line of turnkey systems for cutting complex shapes. This machine is one of the most powerful and accurate machines available The Mach 4 AF systems cut with precision accuracy, at speeds up to 400 inches per minute. This system features a Siemens 5 Axis CNC controller, for your programming ease. Axis X 2500 mm Axis Y 1900 mm Axis Z 600 mm Number of tool 1 Full details of the machine are available upon request A brief history of the machine is that it was bought by GKN aerospace and Rolls Royce for a R&D project connected to manufacturing Carbon Fiber aircraft engine fan blades. It was bui ...

Installed in August 2014 Regularly maintained Usually very small pieces are cut https://www.mitsubishi-edm.de/en/mvs-series-specifications.html

SALE OF 400W CO2 LASER CUTTING MACHINE FOR METHACRYLATE (PMMA) For team change: We sell CO2 laser cutting machine for methacrylate. CE manufacturing (France) and SYNRAD laser source (USA). Currently in operation, you can see and test it. Very careful and well maintained. BRAND: MECANNUMERIC MODEL: MECALASE 3020 CUTTING AREA: 3000X2000mm HEAD CLEARANCE: 190mm LASER: SYNRAD 400W (plus ANOTHER EQUAL SOURCE TO RECHARGE) YEAR 2005 WORK HOURS: 11,574 CONDITION: VERY GOOD, 100% OPERATIONAL SMOKE CLEANING: TEKA BRAND TOWER COOLER (CHILLER): HIFRAPEDIA BRAND LENSES: 2.5 and 5 INCHES CUTTING THICKNESS IN METHACRYLATE: UP TO 40mm (CAN CUT 50mm) SOFTWARE: LASERTYPE CPU with software included

Sofema press for foam cutting Year 1990 The use of the presses is intended for foam cutting. (cushioning foam, soundproofing or other for automotive, aeronautics, etc.) The last pieces cut are the one in pj. At the documentation level, we have electrical diagrams and a few mechanical plans.

Dolouets 2 GSV 53 press for foam cutting The use of the presses is intended for foam cutting. (cushioning foam, soundproofing or other for automotive, aeronautics, etc.) The last pieces cut are the one in pj. At the documentation level, we have electrical diagrams and a few mechanical plans.

Key data: 3000 W, 1500 , 6000

New fiber lasers of the HLB series - Optimised equipment with an eye on the essentials – low acquisition costs despite high-quality components. 6kW resonator, Raycus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs EQUIPMENT: Cutting Head: Raycus - Auto Focus MAX Photonics Resonator 6KW (12kW optional) Automatic changeover table incl. light barriers Suction Welldone CE certified CypcutControl Sheet format 3,000mm x 1500mm (4,000 x 2,000 optional) Max sheet thicknesses at 6KW FE 20m VA 15mm ALU 10mm CU 6mm Connected load max. 30kW Footprint approx. 9,000mm x 3,000mm x 2,200mm The machine is included 24 Months Warranty Commissioning Delivery within Germany and Software/operator training offered Gases, electricity, and you're done. In our showroom we have various laser machines from our manufacturers  ...

The EBA 10/720 Guillotine is a very popular machine within the larger guillotines catergory. This guillotine is programmable and has light beam guards, it runs on 3-phase electric and has all the top quality features necessary on a modern paper guillotine. The EBA guillotines are manufactured in German, made in the same factory as the IDEAL guillotines. High quality German engineering. Program (50 Programs), Air table, Side table with air. Hydraulic driven knife and clamp operation Three-Phase Paper size: max. cutting width 72cm max. depth 720cm Min. Cut width 15mm Min. pile height 100mm

The cable peeling machine "MASTER 140" is suitable for peeling XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. In contrast to other underground cable machines, which usually only have one blade, the "Master 140" cuts with two blades at the same time – this saves you an additional pass if necessary. To push the cable halves apart, expansion wedges can be screwed on. Both blades can be individually adjusted to the desired cutting depth. Due to concave tension rollers, the cables are less compressed at the cut surfaces, cores from (lead) sheathed cables can be removed more easily. Specifications: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 Volt Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg

CUT OFF SAW machine model BOTTENE TE 500 second hand machine motorized infeed roller conveyor machine in very good working conditions machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various diam. blade mm. 500 engine power 7.5 Hp max. cutting size mm. 500 x 135(H) input motorized roller conveyor length mm.3000 outgoing roller conveyor length mm.3700 volt. 380/50 overall dimensions of the assembled machine: 6700 x 1200 mm overall dimensions for transport: 4000 x 1350 mm weight kg.1300

Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to +45° and -60° Silent operation Heavy-duty cast design High cutting accuracy due to vibration-free operation Ball-bearing saw blade guide Chip brush Automatic shutdown of the saw a ...

Sodick A325 wire EDM end of 1999 Used very little and in perfect working order. Partially revised Currently installed and connected, you can see it and try to work. Working field dimensions X350 x Y300 x Z220 mm Conical cut.

MOST SPEEDCUT 15/30 plasma-gas cutting machine was built in 2018 in Poland. The machine used for professional production needs, performs precision cutting of metals with a maximum weight of 4 tonnes using a fully automated torch. The torch uses a special system to protect the torch from damage, which combined with the fully galvanised, single-module design of the machine guarantees long and trouble-free operation throughout its lifetime. The SpeedCUT 15/30 CNC cutting machine weighs 1500 kg Technical specifications of MOST SPEEDCUT 15/30 plasma-gas cutting machine - work table dimensions (L x W): 3000 x 1500 mm - travel speed: 25000 mm/min - working speed: up to 10000 mm/min - Z-axis feed range: 110 mm - maximum workpiece weight: 4000 kg - table type: waterbed table (stainless steel tub) - power supply: 230 V; 50 Hz - dimensions (L x W x H): approx. 3600 x 2050 x 1650 mm - we ...

Cut to length line Herr-Voss/Cincinnati 2400mm x 8mm x 25t (A3780) Material Width: 700mm – 24000mm Material Thickness: 2mm – 8mm Coil Weight: 25 ton Coil ID: 410mm – 650mm Coil OD: 1800mm Direction: L-R Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double Mandrel Uncoiler Powered Hold Down Roll Sliding Base Pneumatic Brake Sliding Base Feed Up Motor Drive Hydraulic Peeler Driven Pinch Rolls 4-Hi Corrective Leveler Nine (9) Work Rolls Work Rolls Diameter: 225mm Motor: 75Kw DC Drive Driven Exit Conveyor 4-Hi Corrective Leveler Eleven (11) Work Rolls Adjustable Work Rolls Work Rolls Diameter: 112mm Motor: 200Kw DC Drive Driven Exit Conveyor Mechanical Shear Entry Pinch Rolls Air Clutch and Brake Exit Driven Conveyor Drop Type Stacker Sheet Length: 1000mm – 7000mm Driven Exit and End Conveyors Electrics,  ...

EAGLE eVision 1530 F4.0 4kW fiber laser built in 2016 in Poland, is designed for machining sheet metal made of among others stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDSON TORIT DCE multi-chamber extraction system. The total weight of the machine is approximately 18000 kg. Technical specifications of the EAGLE eVision 1530 F4.0 laser cutting machine - laser power:  ...

Machine Description/Name: 1500W Laser Cutter for 14mm44 Steel Manufacturer: TechnologieCNC Model: 14mm 1313 1500W Year of production: 2023 Condition: New Operating hours: 0 h FIBER 1313 1500W Laser Cutter for 14mm Steel This specialized metal cutting machine up to 14 mm, Professional training, commissioning and installation included The worktable is welded by precision welding process after annealing and stress relieving. High cutting quality and performance are just the tip of the iceberg! The maximum cutting speed it achieves is 60 m/min. The FIBER 1313 laser cutter is a state-of-the-art device that enables precise cutting of various types of materials, such as steel, aluminum, brass, copper, and even wood or plastics. The FIBER 1313 laser cutter uses laser fiber technology, which ensures high cutting quality, accuracy and repeatability. The machine is equipped with adv ...

Crusher mill with blades Open rotor 4 rows of rotor blades Camera cut: 615x480 mm Engine: 45 kW (60 hp) Soundproofing booth for the mill electrical panel. Reference: GT-3580

Inv. Num. : 7265 Type: R11-SA-1600 X3 Producer: JORNS AG Created: 1996 Parameters: Maximum coil weight: 13000 kg Maximum coil inner diameter: 508/610 mm Minimum width in roll: 100 mm Maximum width in roll: 1500 mm Maximum sheet thickness (stainless steel): 1-2 mm Maximum sheet thickness (aluminum): 0.8-3 mm Maximum thickness of cut sheet (black steel): 0.8-3 mm Maximum sheet thickness (galvanized): 0.4-3 mm

Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...

Type TAM 25/600 Masch.-Nr. 1010 Built in 1992 . Specifications: Workpiece diameter approx. 1 – 25 mm Cut-off spindle approx. 8,800 rpm Grinding spindle approx. 4,400 rpm Cutting wheel 125 x 1.5 x 20 mm Grinding wheel 100 x 50 x 20 mm

Cutting line Polar 176 XT-AT-Pace, year 2010 (cutting width 1760 mm / 69.29") The machine is in a good working condition, only 1.6 mio. Cuts PACE stands for POLAR Automation for Cutting Efficiency, whereby the loading, turning and waste disposal processes are automated. The Autoturn turning gripper in conjunction with the Autotrim high-speed cutter makes it possible to automate the first five cuts (all-round with separating cut). Equipment: Polar Autotrim 176 XT-AT, Autotrans M Format 7S, Autoturn, lowerable ruler left and right, rotating saddle, Compucut and P-Net possible, ErgoFront tables, various air tables and protective grids, etc. Available: immediately Suitable accessories are available immediately and can be purchased as an option: Transomat loader3 BL 160-7S incl. chip marker and counter ruler, year 2010 Transomat unloader ER 160-6, year 2010 Pres ...

Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm

CNC cross-cut saw Paul Type 18 E Specifications - Incoming wood length (mm): 2300 - 3500 - Wood thickness (mm): 27 - Wood width (mm): 80 - 600 - Type of wood: oak, beech unedged, kiln-dried, rough-sawn - Shortest sections to be sawn (mm): 2250 - Cutting width (mm): 78 – 220 - Machine frame: made of sturdy welded construction with 20 mm load-bearing walls - Machine hood: with viewing window that can be folded up, soundproofing (sound level < 85 dB (A)) - Cutting height (mm): 180, with saw blade diameter 800 - Note: Machine without control cabinet, as it was integrated into a machine line

Hermak 1600x03,mm-3mm Cut to length line Brand: Hermak  1600x03,mm-3mm  Roll Loading Cart up to 20 tons  Hydraulic Uncoiler  Carrier Transfer Unit  Slitting Cutter Unit  Slicing Knives  Burr Winders  Well Closing and Transfer Unit  Separator Units and Parts  Tape Transmitter  Roll Sheet Winder System  Electronic Control Panels  Hydraulic and Pneumatic Systems

Code: 0228 Brand: COMPA Model: FC 350 R SUPER - CE Standard Professional benchtop cut-off machine for wood and aluminium - CE Standard - Year 2015 Three-phase motor 1800 watt Blade diameter mm 250 F 30 Rpm 3000 Cutting height at 90° mm 100 Cutting height at 45° mm 100 Diameter of suction mouth mm 70 Overall dimensions mm 800 x 550 x 500 h Weight kg 45

Slitter rewinder for paper and foil Manufacturer = Titanium, Type SR7 Max. material width = 1350 mm Max. working width = 1300 mm max. speed = 400 m/min Diameter unwinder = max. 1000 mm Rewinder diameter = max. 800 mm 76 / 152 mm sleeve With pressure roller Friction Waves 76 / 152 Cutting system = paper cut Upgrade 2007 with automatic knife adjustment (Newtec) Motor with electric brakes Side edge control With adhesive table Roll removal device

Key data: 400 mm, 100 mm

SPECIFICATIONS: Saw blade diameter mm 400 - bore mm 30 Max. cutting height mm: 100 Max. cutting width mm: 250 Cut timer 0.13 sec Installed power: 3.0 KW Electric/pneumatic operation Equipment: 01 Loading roller conveyor mm 4000 x 300 - electric operation 01 Sawing unit diameter mm 400 for workpiece ends 01 Unloading roller conveyor mm 4000 x 300 - electric/belt operation 03 Ejector roller conveyors with light barrier operation 01 Group of 4 motorized pushers for finishing 01 Control cabinet

Soundproof grinder with blades, brand: Rapid, Model: 2645/ KUP. Cutting chamber: 450x260 mm. Open rotor, inclined cut. Motor: 11 kw (15 hp) with electrical panel.

Inv. Num. : 7354 Type: SF3015H Producer: SENFENG Created: 2021 Parameters: Sheet dimensions: 1530x3050 mm Laser power: 6 kW Work table length: 3000 mm Work table width: 1500 mm Maximum thickness of cut sheet (black steel): 22 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminum): 16 mm Feed length Z-axis: 220 mm Machine weight: 6800 kg

CO2 laser ERMAKSAN laser cutting machine Year of production 2011 4kW laser power. Working time of the laser beam 7 700 hours Linear drives Possibility of using Co2 / He / N2 gases Acceleration: up to 169m / min Positioning accuracy: +/- 0.03 mm / m Dimensions (L x W x H): 10470 x 5285 x 2430 mm Machine weight: 20 800 kg Table 3000 x 1500 Electrical demand: 50-70 kW. The laser is equipped with a Fanuc resonator (4000 W CO2-Laser GR Fanuc C4000i-B, Short Optical Path Type). The catalog laser is able to cut sheets up to 20 mm black stainless steel up to 12 mm and aluminum up to 8 mm. It has two interchangeable work tables. The device is fully functional. net price

Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Automatic tube cutting machine using a SIMEC saw cutter, Mec 120 M CNC model, designed for cutting metal or non-ferrous tubes with a diameter of 12 mm minimum to 100 mm maximum, round, square or rectangular section. Managed by Siemens S7 automaton and industrial PC with Galiléo” software with calculator and cutting optimization (angle or straight). Automatic loader, inclined plane type for bars up to 6.5 M Automatic feed by feed clamp driven by brushless motor: speed: 1M/s Automatic head rotation + - 60° for angle cuts Unloading of cut pieces (max: 2000mm): 2 positions

PRIMA POWER PLATINO 1530 laser was produced in 2000 in Italy. The machine is designed for cutting structural steel, stainless steel and aluminum sheet metal. The processed sheet metal can have a maximum thickness of 15 mm (structural steel), 6 mm (stainless steel) or 4 mm (aluminium). The feed rates on the X/Y/Z axes are respectively 3000 mm (X axis), 1500 mm (Y axis) and 140 mm (Z axis). The laser cutting machine is equipped with a high performance PRC PLS2200 resonator with a power of 2200W, created for fast and precise cutting of sheet metal and to guarantee the highest quality of the cut elements. The PRIMACH 20L CNC control installed allows you to memorize many different work programs and to control every aspect of the machining. The machine is offered with a wide range of equipment, including: SiCam v14 CAD/CAM software (license for one workstation + dedicated PC) and P ...

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

Weinig GreCon Dimter OptiCut 101 R optimizer - German production - full optimization - year of production 1998 max. length of the cut material 3000 mm max. width 360 mm max. height 100 mm automatic length measurement blade diameter 500 mm main engine power 6.25 kW Graf-Syteco control optimization for length and value pneumatic side and top pressure 1600 mm receiving table total length 7000 mm transport dimensions (length / width / height) 560/240/200 cm weight 1800 kg

Weinig Dimter OptiCut S90 optimizer - after the technical review - German production - year of production 2005 max. length of the cut material 4500 mm max. width 360 mm max. height 160 mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7.5 kW pneumatic side and top pressure disc diameter max. 500 mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m printer for marking elements cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600/240/190 cm weight ~ 1800 kg

Vegetable cutting and washing line consisting of: Product elevator by means of plastic belt with buckets. Dimensions: 2740 x 200mm useful Model: EV-2740X200 Cutting, slicing and dicing machine for vegetables (potatoes in its last application) with continuous working system for uninterrupted production. Three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140 mm) in any dimension. Cuts cubes or smooth or corrugated strips, three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Slices: 1/16 - 3/4 (1.6 - 19.1 mm) Cubing: A combination of the slicing blade, crosscutting blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjustin ...

Vegetable cutting and washing line Line composed of: Product elevator using plastic belt with buckets Dimensions: 2740 x 200mm useful Brand: T.PACK S.L Model: EV-2740X200 Year 2005 Cutter, slicer and dicer for vegetables (potatoes in its last application) with a continuous work system for uninterrupted production. three-dimensional cuts that have four wavy surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140mm) in any dimension. Makes smooth or wavy dice or strip cuts, three-dimensional cuts that have four wavy surfaces, and smooth cuts of a wide variety of fruits and vegetables. Slices: 1/16 – 3/4 (1.6 – 19.1 mm) Dicing: A combination of the slicing blade, cross blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjust ...

The machine is in good technical condition, after prior arrangement it is possible to test it. 11/23 - big service. Interchangeable tables: 3x1.5m - 2 pcs. Laser power: 4,000 W (41.1 kW), source: FL 040 Rofin, Precitec cutting head, cut approx. 12 thousand hours., cooling: Termotec, laser weight: 13,000 kg

Laser for cutting pipes and profiles ADIGE LT 722D is in good technical condition. By agreement, it is possible to see under the current. It can cut open and hollow profiles up to a length of 6500mm, with min. 10mm max. diameter 120mm. Automatic unloader for processing products with a length of max.: 4500 mm with the possibility of sorting products. Cooling equipment, extraction equipment, documentation for the machine. Regular service and prescribed maintenance. Operating hours Status 01/19/2024 – Computer: 87,001 h; High Voltage: 80.260 h; Counter: 81,444 Machine weight: 9000 kg Laser power: 2500 W Max. workpiece weight: 100 kg Pipe size max.:: D 140 mm Size of profiles min - max.:: 30x20 - 120x80 mm Automatic loader for processing bars with a length of max.: : 6400 mm Machine dimensions lxwxh: 10514x4600x2237 mm

Type: CF 1500 / PS Parameters: 18 mm, 1500 x 3000 mm Manufacturer: Balliu Year of production: 2005 Location: Czech Republic Description: Laser BALLIU CF 1500 / PS, 3.5 kW, year 2005, in operation under power, possible inspection, regularly serviced. It is a CO2 laser with linear motors and uses the SPAB Rofin Sinar laser resonator. Advantages of this laser source: Cheap traffic Low demands on rare gases such as Helium and Argon The machine only needs dehumidified frozen air to operate. It still has its own Donaldson freezer and therefore does not need 5.0 nitrogen for operation. Black sheets are cut with oxygen 4.0 and higher, stainless steel sheets with nitrogen 4.0 and higher. It has a resonator of 3,500 W, which means that it cuts black sheet metal up to 18 mm and stainless steel up to 8 mm. It has Siemens linear motors, so it hardly requires maintenance and does not wea ...

Two-head cut-off saw EMMEGI year 2014 matr. C115528.

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour