cut to used for sale

Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Electric forklift, electric stacker, e-stacker, 3-wheel forklift -Manufacturer: Toyota, Electric forklift 3-wheel forklift type FBESF 15 -Load capacity: 1350 kg -Lifting height: 3300 mm -Voltage: 24 volts -Tine length: 1090 mm, cross section 80 x 40 mm -Equipment and accessories: Sideshift, clear-view mast, charger, lighting system -Operating hours: 20293 h -Battery: ibv type 8 PzS 920 K 24 V built in 05/2009 -Forklift dimensions: 1780/1050/H1980 mm / with mast height 2120 mm -Weight: 2800 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: 4 tank rollers -Load capacity: 30 t (7.5t per piece) -Support height: 110 mm -Plates: 3x Ø 140 mm / 1x width 135 mm -Submission/Price: complete -Dimensions of transport case: 1005/200/H165 mm -Total weight: 57 kg.

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type AB 10-25 mm 3 pieces -Cutting range: 10 - 25 mm -Pressure: 3.0 - 4.0 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: Yalel, multi-purpose cable pulley type Yaletrac 3.2 TON -Load capacity: 3200 kg -Steel cable: Ø 16 mm / not included, selection in stock at an additional cost -Number: 2x cable pull available -Price: per piece -Dimensions: 700/150/H370 mm -Weight: 22 kg/piece

Filter system, air conditioning unit, air conditioning, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Filter unit (from an air conditioning system) -Manufacturer: Wolf -Type: KG Top 4040 -Power: Fan 4x 5.0 kW -Volume flow: 47000 m³/h -Dimensions: 2950/2800/H2800 mm -Weight: 1400 kg

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Manufacturer: Topregal, shelf impact protection, corner guard -Type: L-shape -Height: 400 mm -Quantity: 3 pieces available -Price: €70 per piece/ for the whole set. -Dimensions: 240/120/H400 mm -Weight: 3.1 kg/piece

grinding diameter: 630 mm grinding length: 3000 mm workpiece weight: 2500 kg grinding wheel diameter: 750 mm voltage: 400 V Control: total power requirement: kW weight of the machine ca.: t Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Dresser Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS  ...

Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Cable winch, hoist winch, construction winch -Mechanical winch: with planetary gear without drive -hydraulic brake -Traction force: approx. 20,000 kg -Drum: Ø 500 mm -Rope diameter: 24 mm -Rope to be wound length: 2x 28 m -Number: 2x winches available -Price: per piece -Dimensions: 1640/700/H700 mm -Weight: 1026 kg/piece

Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement.

Welding manipulator Type: P82 14VF Hydraulic lifting and tilting Electric turning MANIPULATOR: yes Capacity: 9,5 ton

Manufacturer: Torusmill Model: TM-100 Year: 2004 The cooling circuit is not included Technical Specifications - Tank Volume: 100 L - Grinding Material Capacity: 40 - 70 L - Grinding Basket Volume: 4.3 L - Bead Fill Level 50%: 2.135 L - Main Motor Power: 15.0 kW - Motor Speed: 0 - 3,000 rpm - Shaft Speed: 100 - 2,000 rpm - Power Supply: 3 x 400 V / 50-60 Hz - Fusing: 3 x 50 A, 2 x 2 A - Total Weight: approx. 1,000 kg Find more here - / Contact us at -

Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle pla ...

Find more here - / Contact us at -

Machine 1 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2000 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: October 2018 Machine 2 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2003 - Loading Magazine: LNS Tryton 112 Machine 3 - Manufacturer: Tornos - Type: DECO 7mm - Control: Fanuc ITA - Year of Manufacture: 1999 - Machine Number: T-63034 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: June 2019 General Condition - All machines are fully functional with no technical defects - All machines are currently running in a medical device production line Find more here - / Contact us at -

Code: 0348 Brand: VITAP - ITALY Model: POINT K2 TOP - CE CE Standard CNC working centre for the precise and flexible drilling and milling of panels, furniture, custom-made furniture, kitchens, bathroom furniture and various – CE Standard – Year 2017 Technical specifications: Compact machine Patented D.D.T. (double dynamic transport) system with continuous panel movement without any repositioning of the workpiece, using two clamps. Technical data: Panel dimensions: Min/max length 270/3000 mm Min/max width 180/1100 mm Max height 50 mm Horizontal panel feed on X-axis 25 mt/min Vertical feed on Z-axis 15 mt/min Horizontal feed on Y-axis 30 mt/min Drilling head: Motor 2 Hp 12 vertical spindles side 1 Z-axis 2 horizontal spindles side 4 Y-axis 2 horizontal spindles side 6 of the Y-axis 2 horizontal spindles side 3 X-axis 2 horizontal spindles side 5 X-axis  ...

BREADING MACHINE MAREL TOWNSEND FURTHER PROCESSING B.V., MODEL: TRM 630 Technical description: Marel Townsend Further Processing B.V. rolling machine. Model TRM 630 Type 472640 Serial number 10096047 Plastic belt, belt width: (2x) 630mm Total dimensions: 2050mm x 1300mm x 2100mm

Edge banding machine Type: Top 2000 Manufacturer: Hebrock Year: 2007 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Offered is a horizontal knee-type milling machine: Table clamping surface X/Y: 300mm/1250mm, travel X/Y/Z: 800mm/275mm/400mm, table load: approx. 250-300kg, T-slots: 3pieces/18mm width/63mm spacing, spindle mount: ISO40 (steep taper40), spindle speeds: 12steps, speed range: 45-2000rpm, feed range (longitudinal/transverse): 14-900mm/min, feed range (vertical): 4-250mm/min, machine weight max.: approx. 2400kg, machine dimensions X/Y/Z: approx. 2000mm/1700mm/1700mm. Inspection possible by appointment.

TOS KURIM FNK 25A vertical milling machine was built was built in the Czech Republic by TOS KUŘIM – OS, a.s. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as precise drilling and milling of workpieces with a maximum weight of 200 kg. The machining process is performed by a reliable spindle, moving in three axes X,Y,Z with feed of 800 mm, 370 mm and 450 mm respectively. The spindle speed is adjustable from 56 to 4500 rpm, enabling precise adjustment of the parameters to the type of workpiece. The TOS KURIM FNK 25A also enables machining at various angles, thanks to its tiltable workhead. All this is complemented by a compact yet extremely rigid design that perfectly dampens any vibrations and ensures maximum process stability during even the most intensive challenges. All of this makes the TOS KURIM milling machine  ...

Type: BT LSV 1600 BT Staxio: 3300 mm heigt Loading capacity: 1600 kg Max arrow height: 3300 mm

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

number of spindles: 6 spindle passage: 26 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Silo system with 4 containers HB-TECHNIK - Capacity of a total of 16 tons of flour - 4 aluminium silos - Incl. scale and dosing unit - Condition: Good, ready to use - already dismantled - Transport costs and assembly on request

Used stainless steel, vertical silo made by German company AZO, capacity: 12 tons (approx. 7.2 m³). The silo features a vibrating floor, a silo discharge valve, and a blow-off pipe. Used for storing PVC powder. 10 units available.

Net weight= 415 kg,

Model: TVF630/4000TH Year: 2011 Condition: Used Serial Number: 10092893 Stock Number: 3311 Belt width: 630 mm Description: Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level indicator, CIP Frying length 4000 mm Heating thermal oil, 232kW Oil capacity: +/- 1100 litres, 20 mm above belt Compressed air: 6 - 8 Bar, 0.5 Nm³/h Power: 3 x 400V, 50Hz, 10.5kW Dimensions: 6850 x 2100 x 2800 mm Weight: 4200 kg

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2019 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Planetary mixer Tonelli PDC 120 Universal 2000 Year of Make: 1989 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2019 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Planetary mixer Tonelli M 120 Year of Make: 2007 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Planetary mixer Tonelli M 120 Year of Make: 2003 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Key data: 1 mm, 50 mm

Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current  ...

Pastries and croissants Rondo TOP LINE Suitable for the production of filled and unfilled croissants, puff pastry products such as cinnamon rolls and other stuffed baked goods. Available now! Laminating line (YOC: 2005) consisting of: Dough hopper/pre-portioner Dough Sheet Former Grease pump (year of manufacture: 2007) Conveyor belt with folding belts Satellite Head 1 Folding station Satellite Head 2 Cross roller Calibration Roller Transfer wristbands to the croissant section Conveyor belt with cutting rollers and spraying station Pneumatic 6 Piston Filler Guillotine Depositing device for

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2022 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Year of manufacture: 1979 / overhauled: 2024 Circumferential diameter over bed ... 710mm Turning length... 2000mm Max. workpiece weight ... 850kg Circumferential diameter via support ... 420mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW Machine weight ... 3000kg L x W x H ... 4000x1440x1560mm The machine is in very good condition - after the general overhaul. More info on request. Viewing is possible at our warehouse in Brno.

Year of manufacture: 1978 / overhauled: 2024 Circumferential diameter over bed... 710mm Max. workpiece length ... 4000mm Circumferential diameter via support ... 420mm Spindle speed ... 90-1000 rpm L x W x H ... 6000x1440x1560mm Machine weight ... 3500kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

grinding diameter: 630 mm grinding length: 3000 mm : 2500 kg grinding wheel: grinding stand diameter x wid: 750x100x305 mm grinding head swivellable +/-: +30, -10 ° : 840,970 1/min : 1 mm : 3450 mm table speed -stepless-: 0.05-3.6 m/min table swivelabel +/-: +/- 5 ° Rotation speed of the work piece spindle area 1: 8 - 50 Rotation speed of the work piece spindle area 2: 50 - 315 1/min workpiece-spindle swiveling: 90 ° Motor of the grinding spindle head: 15 kW total power requirement: 31 kVA weight of the machine ca.: 15 t Equipment/Accessories: -4 flanges -Balancing stand -Various tips -Various spare parts -Paper belt filter -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Tapping machine Rems Tornado type 2010 220V, 50Hz used device Threading machine for pipe threads (1/16) 1/8 – 2", 16 – 63 mm, bolt thread (6) 10 – 60 mm, 1/4 – 2". With maintenance-free gearbox, safety foot switch with emergency stop, 2 automatic chucks, automatic lubrication cooling. With tool set, consisting of a universal automatic cutting head for all threads, including long threads, automatically opening, with automatic thread length for tapered threads, cutting jaws for pipe threads tapered ISO 7-1, EN 10226 (DIN 2999, BSPT) R 1/2- 3/4 and R 1 – 2

Description Label Printer Toshiba B-472-QP TEC Identical label printer Stielow 3565 with rewinder – Serial interface, 25 pin – Technology: Thermal Transfer – Resolution: approx. 200 DPI – Print width: max. 104 mm – Print speed: up to 250 mm/ second Thermal transfer ribbons for thermal transfer printers, 80 mm x 600 m, 1", wax-resin quality, flush on the outside, rolled up on a 1 inch cardboard tube. The ribbons have an outwardly wound wax coating / color side and are suitable for near-edge print heads.

Description Format 66 x 84cm DCT Control Inclined roller table Ruler position as 3rd. Movement with 4 pockets 66cm and downstream knife shaft

Description This sensational, versatile tool with a diameter of 35 mm solves your cutting and micro-perforation problems in one fell swoop. Only one tool for micro-perforation, cut-off, cut-out, edge trimming and scribing.

Description Torre MiniPack Mailbag from 2006 is the automatic vertical packaging machine, ideal for magazines, newsletters, catalogues and publications. The film spool on this machine is mounted on a motorised roller. A folding device bends the film into a closed bag that contains the product. At the end of the process, the product is automatically ejected.

Dust collector with pocket filter With vibrator for, shaking the filter With replaceable dust collector 1350 x 800 x 2600mm 415 kg functional

TOSI VERONA, Max. Size: 1200x1800 mm, Min. Size: 400x400 mm, in production, Location: Germany

: gebraucht : 2012 : 9690F : prompt, Zwischenverkauf v : China : 690 € : 1 : 100 mm : 3 mm : 90 ° : 90 kg Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.