cut size used for sale

Output: 1400mm, equipped with welding turntable ø 980mm. Including 1x sheet size ø 1830 x 30mm Auction-ID: A1-49889-249

Type 93576085, Incl. twin hose and pressure reducing valve Auction-ID: A1-50529-537

With table 455x455x940mm Auction-ID: A1-49889-261

Oxy-fuel; with various running rails. Auction-ID: A1-49889-122

Oxy-fuel; with various running rails; with swivel arm for gas hoses; Total length approx. 5 meters. Auction-ID: A1-49889-120

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll splitter RGS50 -Used machine- Good condition - ready for immediate use partially overhauled: Hydraulic hoses renewed Hydraulic oil change carried out Safety valves retrofitted Control overhauled Surround renewed Knives renewed Knife length 2500mm Max opening 1600mm V-table version Drive power: 15kW with soft start Dual pump with 2 stages cutting speed Two-handed operation Emergency stop cable on both sides Base frame and feed table available

Key data: 3000 mm

Ref. No. 00941 Name of the system Used CO2 laser cutting machine Manufacturer: Amada (Japan) Model LC2415 Alpha III Year of manufacture 2004 Operating hours 23,488 h Working range 2,520 × 1,550mm Laser Unit Manufacturer Fanuc Laser C4000 Laser power 4000 watts Suction Amada Fanuc AF4000E Cooling system Riedel PC315.21 NE The current owner bought the system second-hand in November 2020 Last working day on the machine was approx. End of 2023 Since then until today, the machine has not been used anymore Condition of the facility can be visited on request

Key data: 205 mm, 410 mm

1 gebr. LZS Lathe, TOS SN40B x 1000 mm Technical data (TOS SN 40 B) Center width: approx. 1,000 mm Center height: approx. 205 mm Circumferential diameter over bed: approx. 420 mm (hence the designation "SN 40") Circumferential diameter over flat lower saddle: approx. 225 mm Circumferential diameter in the offset: approx. 600 mm (if equipped with removable bridge) Bed width: approx. 400 mm ⚙️ Spindle & Feeds Spindle bore: approx. 52 mm (ideal for common rod diameters) Spindle mount: DIN 55027 Gr. 6 (with bayonet lock) Speed range: Steps graded, usually from approx. 11 to 2,240 rpm (in several steps via gearbox) Power of the main motor: approx. 6.6 kW (powerful industrial drive) Dimensions & Weight Machine weight: approx. 1,800 kg to 2,100 kg (depending on tip width) Space requirement (L x W x H): approx. 2,500 x 1,000 x 1,350 mm (with 1,000 ...

PAPER CUTTER EBA MULTICUT 10/550 CNC -Year 2003 -Working width 55 cms -Light barriers, program control, air table -Lateral side tables -3 spare knives, all tools and manuals -Power: 220 volts/ 50 HZ - 1,5 Kw. - Weight 300 Kgs. -In good conditions, immediately available

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Key data: 3000 mm, 1500 mm, 6000 W

with Bytrans Extended

The machine is equipped with a tailstock, a Multifix tool holder, and a digital readout from the manufacturer ACU-RITE. The machine comes from a training workshop, therefore the lead and feed screw are covered. Additional technical specifications: • Center height over cross slide: 90 mm • Center length: approx. 900 mm • Center height over bed: 170 mm

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

electric pile cutter with automatic pressing, 380V, back gauge adjustable by hand crank, measuring scale on the front table, optical cut indication, table model (without base)

Year 2014, equipped with milling head Kongsberg ArtWor Complete with vacuum system and unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-2

provided with 2 cutting supports, 1x waterjet cutting support (Y1), with Hi Precision P-75S water jet pump, 1x plasma cutting support (Y2) with Hypertherm XPR300 plasma source with cooling, 1 allfi waterjet abrasive hopper, Teka Handycart PP-DC 1.2 kW burner extractor, 2x MSNC RO2 control unit, 1x control box, type: RS, 1x Pc console, and main control box. Includes workbench and steel cabinet with accessories. Auction-ID: A1-49889-19

ID3867 Fantini 70 RA/P year/Baujahr 2020 1.300 hours/hours Cutting saw, sword length 2.7 m, swivel head (vertical and horizontal), with 3 guide rails and transport/lifting device Shearer saw, blade length 2.7m, rotating head vertical and horziontal, with 3 x working rails, transport/lifting device Price: on request

table load: 1,950 kilos per m, equipped with Enduromax waterjet pump, equipped with Pentar water softener, 1x Alup Vario screw compressor, (2008), 1x Trd 11 freeze dryer, 1x Atlas Copco oil / water separator, 1x abrasive storage silo, 2x dump hoppers and Pc console. Includes 1 pallet with cutting table edges and workbench with accessories Auction-ID: A1-49889-18

Including Cyklos KSL 435 manual creasing/grooving machine, Cyklos CP 20 calendar thumbcut punch machine, Cyklos MC 6 hole puncher and NOVUS B 40 stapling machine. Auction-ID: A3-50009-350

Bj2019, equipped with High-Power milling unit. Complete with vacuum system, cooler IBAG and mobile unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-1

CO2 laser cutting machine manufactured in 2008. This SEI Laser Paper Blaster 02 features a sealed CO₂ laser with a nominal power of 115 W, designed for paper and cardboard processing. It includes an automatic sheet feeder with a maximum stack height of 350 mm and an integrated conveyor system for efficient operation. If you are looking to get high-quality cutting, marking, and engraving capabilities, consider the SEI Laser Paper Blaster 02 machine we have for sale. Contact us for further details.

2018 Kronen KUJ cube, strip and slice cutting machine – used, Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing., This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/kronen-kuj-2/, Machine type: Cube, strip and slice cutting machine, Condition: Used, Cutting types: Cubes, strips and slices, Infeed: Inclined cleate ...

1.0 GML 1400 Planer Head Grinding Machine Fully automatic planer head grinding machine with variable carriage feed, automatic pitch and automatic delivery of the acceptance. TECHNICAL DATA Tool diameter: 160 - 360 mm Grinding length: 1,380 mm Graduation: (even number of blades) 2 - 40 Z additional 1, 3 and 5 knives selectable Grinding motor power: 1.0 kW Speed of the grinding wheel, adjustable: 3,000 - 6,000 rpm. • For grinding LEDINEK planing shafts as well as hydraulic planing heads, • Adjustable mounting brackets for shafts with different bearing distances, • Control console with 7.0" touch screen LENZE • Touch screen resolution (pixels) 800x480; Graphics, TFT Color • Input of the clearance angle α the planer blade via fixed value or calculates average β and γ, • Adjustable pressure on the guide ruler, • Dynamic calculation of the remaini ...

Well-preserved plasma cutting machine with 6,000 × 2,000 mm working area, Kjellberg plasma source and Donaldson-Torit DCE extraction system. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Machine Type: Plasma Cutting Machine Year of Make: 2016 Working range: 6,000 × 2,000 mm Plasma source: Kjellberg HiFocus 161 neo Cutting range sheet thickness: 1–30 mm Extraction system: Donaldson Torit DCE Condition: Good Maintenance: Serviced annually by MicroStep Availability: Machine is in operation and can be viewed Location: Rottweil The seller can help with loading.

Standard configuration Machine ⦁ Working Range 6000 x 2500 mm ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Automatic pallet changer lengthwise installation ⦁ Motion unit for high precision processing ⦁ Gantry drive in combination with direct linear drives ⦁ Chiller for machine cooling ⦁ Integrated cabinets ⦁ Wide longitudinal conveyor ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF Laser ⦁ External Solid-state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination Control ⦁ Sinumerik 840D SL ⦁ ControlLine ⦁ Easy shop floor programming ⦁ Fast post production ⦁ 19 To ...

Standard configuration ⦁ Solid-state laser TruDisk 3001 with air-cooled chiller and pilot laser (switch) ⦁ LLK with 100 µm ⦁ Focusline ⦁ Optics recognition and magnetic coupling ⦁ Sinumerik 840D control system: Open control on PC basis ⦁ Fixed suspending control panel ⦁ Teach panel with teach software Additional equipment ⦁ Laser cutting: including 2 cutting gases (02, N2), APC distance control, programmable cutting gas selection, adjustment device, analogue value cutting, pressure adjustment, valves ⦁ Dynamic cutting optics f = 150 mm incl. sensor ⦁ FastLine Cell ⦁ LLK 30 m ⦁ Special suction unit

WJS NC 3000 T waterjet cutting machine was built in 2002 in Sweden by Water Jet Sweden AB. The high-pressure pump working with the machine has been regularly serviced using only the manufacturer’s original parts. The WJS NC 3000 T is designed for the precision 2D cutting of workpieces made from metal and non-metallic materials, such as ceramics, glass and acrylic. Cutting is performed using pure water or water with an addition of abrasive. The machine is equipped with four cutting heads. The third and fourth heads are mounted on a common Z-axis, with a spacing of 80 mm. This solution allows simultaneous cutting with three heads, which increases cutting efficiency and reduces production time. The WaterJet NC 3000 T is operated using an intuitive NUM 1040 CNC controller. The equipment also includes, among others, an abrasive tank with a feeder and a 100 HP high-pressure pump. All t ...

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ Single cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer in longitudinal direction ⦁ Conveyor belt for small parts / slug ⦁ 17 Touch screen ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine TRUMPF Laser ⦁ CO2 laser TruFlow 5000 with optimized standby ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC ⦁ Laser power control ⦁ Logbook function laser Cutting head ⦁ LensLine with status check ⦁ Lens cutting head with 250mm focal length ⦁ Universal quickchange device for cutting head (UTI) ⦁ ControlLine: automatic heig ...

Cutting current: up to 30 A Max. output voltage: 92 V Input voltage: 120 / 200–240 V Frequency: 50–60 Hz Burner: Hypertherm T30v For more details, see photos. Auction-ID: A7-50677-132

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Machine including Liftmaster.

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming � ...

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ Single cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer in longitudinal direction ⦁ Conveyor belt for small parts / slug ⦁ 19 Touch screen ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine TRUMPF Laser ⦁ CO2 laser TruFlow 5000 with optimized standby ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC ⦁ Laser power control ⦁ Logbook function laser Cutting head ⦁ LensLine with status check ⦁ Lens cutting head with 250mm focal length ⦁ Universal quickchange device for cutting head (UTI) ⦁ ControlLine: automatic heig ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ One cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer, lengthwise installation ⦁ Longitudinal conveyor ⦁ Ergonomic control panel with Touchscreen ⦁ Working area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ PlasmaLine Trumpf Laser ⦁ CO2-Laser TruFlow 3200 with optimized standby Modus ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC 3 ⦁ Laser power control ⦁ Logbook function Laser Laser cutting head ⦁ Laser cutting head with 250 mm lens ⦁ Universal quick-change device (UTI) incl. bus connection ⦁ LensLine ⦁ ControlLine: Height regulation and sh ...

KNUTH Basic Plus L&Z Lathe /Year 2011 -Tip height 150mm -Max turning diameter 300mm -Max turning diameter over support 178mm -Max. turning diameter without bridge 430mm -Tip width: 810 mm -Spindle bore: Ø 38 mm -Spindle speed: 60–1,550 rpm, 9 steps -Automatic longitudinal/plane feeds -Spindle mount: Camlock D1-4" -Tailstock cone: MK 3 -Quill stroke: 100 mm -Bed width: 180 mm -3-axis digital display -Multifix quick-change holder with insert -Electric lining protection -Work light -Rotating center punch tip -3-jaw chuck -2x bezels -Documentation Dimensions: LxWxH 1.6x0.7x1.2 meters / Weight 520Kg

Standard configuration Machine ⦁ Working range: 4000 × 2000 mm ⦁ Box frame ⦁ Longitudinal conveyor belt ⦁ Motion unit for high-precision processing ⦁ Gantry drive in combination with linear direct drives ⦁ Process cooler for machine and laser (water/air) ⦁ Work area illumination ⦁ Pilot laser ⦁ Spraying equipment ⦁ Automatic nozzle cleaning ⦁ Integrated electrical cabinets ⦁ Integrated cabinet ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Machine status light TRUMPF laser ⦁ Excitation using pump diodes ⦁ Laser power control Cutting unit ⦁ Single cutting head strategy ⦁ Universal cutting unit with adaptive lens system ⦁ Protective glass ⦁ Online condition checking of protective glass ⦁ Automatic nozzle centering Control ⦁ Quick post-production ⦁ SINUMERIK control ⦁ Ergonomic control panel with 21.5 wide-screen multi-touch color  ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Automatic pallet changer lengthwise installation ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery via fiber optic cable ⦁ Chiller for machine cooling (water-air) ⦁ Integrated eletrical cabinets with inside light ⦁ Power supply TruDisk via the machine ⦁ Longitudinal conveyor ⦁ Working area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF Laser ⦁ Solid state laser TruDisk 3001 with 1 LLK output ⦁ Fiber optic cable according standard layout (laser next to the machine) ⦁ Laser chiller unit (water-air) ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting head with complete adaptive lense system ⦁ One cutting head stra ...

Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended - Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Hand control - Fiber 4000 laser source - Cutting Parameter Wizard - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Suction device for leaf separation - Compressed air connection - Year of construction 2016 Included packages - Material specification package - Package Part Tolerances & Cutting Surface Quality - Cutting gas supply & cutting quality package

Standard Configuration Machine ⦁ Working area: 3000 x 1500 mm ⦁ Box frame ⦁ Process cooler for machine and laser (water/air) ⦁ Longitudinal conveyor belt ⦁ Work area illumination ⦁ Pilot laser ⦁ Spraying equipment ⦁ Automatic nozzle cleaning ⦁ Gantry drive in combination with linear direct drives ⦁ Integrated electrical cabinets ⦁ Integrated cabinet ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Machine status light ⦁ Machine environment temperature +5°C to 35°C TRUMPF laser ⦁ Excitation using pump diodes ⦁ Laser power control Cutting unit ⦁ Single cutting head strategy ⦁ Protective glass ⦁ Online condition checking of protective glass ⦁ Universal cutting unit with fully adaptive lens system Control ⦁ Quick post-production ⦁ SINUMERIK 840D SL control ⦁ Ergonomic control panel with 21.5 wide-screen multi-touch color display ⦁ In ...

Standard configuration Machine · Closed machine frame with integrated laser unit · Torque drive in combination with direct linear drives · Enclosed beam delivery via fiber optic cable · Chiller for machine cooling (water-air) · Integrated eletrical cabinets with inside light · Automatic pallet changer lengthwise installation · Wide longitudinal conveyor · Power supply TruDisk via the machine · Working area lighting · Positioning laser diode · Spray device · PierceLine · FocusLine · NitroLine · PlasmaLine · Automatic nozzle cleaning TRUMPF Laser · Solid state laser TruDisk 3001 with 1 fiber optic cable laser output · Fiber optic cable according standard layout · Laser chiller unit (water-air) · Stimulation via pump diodes · Laser power control · Logbook function Laser Cutting head · Universal Cutting head with complete adaptive lense system · Protection glass t ...

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm / Stepless speed adjustment -Coolant pump -Lining protection -Three-jaw chuck -Quick-change holder Multifix & insert -Documentation Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Title of the lot: CANOL shaping and cutting table – Guillotine + many accessories – Pastry/biscuit line Brand: CANOL Model: 2001 SNC Year: 1993 CANOL professional dough shaping and cutting table, Italian manufacture, year 1993. Currently integrated into a production line, coming out of a SEEWER RONDO 5-head sheeter, and announced to be functional. It receives a laminated dough strip and carries out calibration, cutting, shaping and cross-cutting operations by guillotine. Known equipment: long conveyor belt, longitudinal cutting system, output guillotine and cutting accessories. Manufacturer: CANOL 2001 SNC – Italy. Professional stainless steel construction. Machine currently in production. Visible and tryable by appointment in the biscuit factory. Auction-ID: A1-50735-1

MAPAL heavy-duty CNC milling tool assembly with multiple replaceable indexable inserts and integrated machine-tool holder. Auction-ID: A7-50717-233

Assorted CNC machine tool holders supplied in a Brunk + Hirth storage rack. Includes collet chucks, drill holders, milling cutter holders and boring/tool holders, several fitted with drills, end mills and other cutting tools. Visible Bilz markings include SK40 × ER40 A=71 and SK40 × 25.5 A=100. Auction-ID: A7-50717-214

Lot of 6 assorted industrial milling cutters. Several are large indexable cutters fitted with replaceable cutting inserts. Visible markings include WALTER 280×30 WIDIA TH10, 280×30 A12, and IPR 250-1-16, ges. gesch. The lot also includes a large helical/form cutter. Auction-ID: A7-50717-212

Large mixed lot of metalworking cutting tools/toolholders, predominantly square-shank indexable holders for CNC/conventional lathes. Includes turning, grooving, parting and profiling holders plus a number of tools/components in original or replacement plastic/cardboard cases. Several holders retain carbide inserts and clamping hardware. Mix includes both apparently unused/boxed items and used tooling. Visible brands include Kennametal, Horn, Hertel, Seco, Tungaloy, Sandvik Coromant, Walter, Widax, Safety and GPK/SPK Auction-ID: A7-50717-227

x-axis: 600 mm y-axis: 400 mm z-axis: 350 mm U-axis: 150 mm V-axis: 150 mm inclination: +/- 25 ° wire dia.: 0,10-0,30 mm wire clamping: 3 - 23 N Control: SPW NC-Steuerung workpiece weight: 1000 kg tank: 1050 x 710 mm total power requirement: 13 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,575 x 2,89 x 2,25 m ALC600G SPW wire EDM machine - SPW NC control, generator and control system - iGroove+ - 3D SetUp - L-Cut (wire shredder) - Dielectric tank 1000 l, 870 x 2605 mm -- 4 replaceable paper filters -- De-ioniser – ion exchange resin (18 l) Workpiece: Steel, 100-130 mm thick Number of cuts: 3 Wire: Brass, Ø 0.25 mm Accuracy: ± 1.5 µm Wire consumption: 35 per cent less during fine cutting Operating hours (cutting time): 3,066 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.