cut size used for sale

Manufacturer: LMlab Model: Bodor i5 (Laser Welding-405) Type of Machine: Laser Welding Machine Year of Manufacture: 2021 Technical Data: - Work Surface: 1300 x 900 mm - Stroke Length X: 1300 mm - Stroke Length Y: 900 mm - Stroke Length Z: 75 mm - Positioning Accuracy X/Y-axle: 0.03 mm - Repeat Accuracy: 0.02 mm - Max Movement Speed X/Y-axle: 60 m/min - Max Acceleration X/Y-axle: 0.6 G - Load Capacity: 250 kg - Protective Enclosure: Class 1 m. laser safe inspection windows - Laser Effect: 1 kW to 4 kW (step of 1 kW) - Total Power Consumption: 1 kW laser = 16 kW, 2 kW laser = 22 kW, 3 kW laser = 27 kW - Electricity Supply: 3-Phase plus earthing, 400V, 50-60Hz - Total Size (L x B x H): 2.3 x 2.2 x 1.85 m - Automatic alternating shuttles, electric driven, with position control, and with its own separate HMI Usage Data: - First Run Time: 2023-10-23 22:01:36 - Total Run T ...

Manufacturer: Model: Bodor i7 Type of machine: Laser Cutting Machine Year of manufacture: 2021 Technical data: • Work surface: 1500 x 1000 mm • Stroke length X: 1500 mm • Stroke length Y: 1000 mm • Stroke length Z: 75 mm • Positioning accuracy X/Y-axle: 0.03 mm • Repeat accuracy: 0.02 mm • Max. movement speed X/Y-axle: 60 m/min • Max. acceleration X/Y-axle: 0.6 G • Load capacity: 300 kg • Protective enclosure: Class 1 with laser safe inspection windows • Laser effect: 1 kW to 4 kW (step of 1 kW) • Total power consumption: 1 kW laser = 16 kW, 2 kW laser = 22 kW, 3 kW laser = 27 kW • Electricity supply: 3-Phase plus earthing, 400V 50-60Hz • Total size (L x B x H): 2.65 x 2.3 x 1.85 m Find more here - .ucymachines/ Contact us at - sales@ucymachines

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AJAN SHP 130 plasma cutting machine was built in 2017 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd. Şti. The machine has been used regularly and has a new plasma torch. The AJAN SHP 130 is used for precision cutting of sheet metal in both unit and series production. Cutting is performed automatically on a 3000 x 2000 mm work table, according to a previously prepared program. The stable plasma arc, generated by a high-performance PG 130 A source, ensures efficient cutting and maintains optimal operating parameters even during intensive use. Contaminants generated during machining are effectively removed by an extraction system, which increases operator safety and comfort. All this is complemented by an intuitive CNC controller, which facilitates the preparation of cutting programmes and the operation of the machine. This makes the AJAN SHP plasma cutting machine an excellent s ...

ZBUS YUN 3000-2 plasma-gas cutting machine was built in 2001 in Poland by Zakład Budowy Urządzeń Spawalniczych ZBUS Sp. z o.o. The machine is designed for the precise cutting of large-sized sheet metals with a maximum length of 12 metres and a thickness of 150 mm. The process is performed using two oxy-fuel torches and a plasma torch. The use of both cutting methods enables the flexible adaptation of the machine to current production requirements. As a result, the ZBUS YUN 3000-2 is ideal for the production of steel components for various industries. The YUN 3000-2 plasma-gas cutting machine is distinguished by its stable, open design, which ensures easy access to the work space from all sides. The plasma torch is mounted in an IHT MSX750ARC support, responsible for its precise guidance and automatic position adjustment relative to the workpiece. The plasma arc is generated by a ef ...

CNC Portal Flame Cutting Machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of Make: 2021 CNC Control: Global Control Track width: 3,600 mm Work tables: 2,300 x 6,200 mm 4 oxy-fuel burners type ALFA MS 4452/250 Cutting thickness: max. 150mm Bevel cutting possible Automatic gas adjustment (OmniFlow) for cutting oxygen (max. 15bar) Extraction system: Keller dry separator type Vario 2 Software: OmniWin2021

Lg.Nr. 26208 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder - Moving grain tips - Separate tool cabinet with various accessories

Manufacturer: Bystronic Model: ByStar Fiber 4020 Year of manufacture: 2018 Type of Machine : Laser center Total weight: 14250 kg Laser medium: FiberLaser Wavelength: 1060nm - 1080nm Max power cw: 6000 (Fiber 6000, 6kW nitrogen cooled) Cutting head: new advanced cutting head, cut time 5185 hrs and standby time 21753 hrs with this head as of today Available with manipulation machinery: table for sheet feeding, ABB robot, manipulator for automated material takeaway Find more here - .ucymachines/ Contact us at - sales@ucymachines

turning diameter over bed: 320 mm turning diameter over slide rest: 180 mm turning length: 1000 mm turning diameter in the gap: 460 mm turning speeds: 70 -2000 U/min centre height: 160 mm spindle bore: 27 mm total power requirement: 2,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Laser cutting machine Type: ADILAS Manufacturer: BLM/ADIGE Year: 2008 Laser type: CO2 Power: 3500 W Number of tables: 2 interchangeable Working area: 6000 x 3000 mm Laser hours: 20,000 The generator was serviced at about 12,000 hours. Steel: up to 20 mm Stainless steel sheets: up to 12 mm Aluminum: up to 6 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Slitting and cut-to-length line Strip width... 1,500 mm Strip thickness 0.5 - 2.0 mm Cutting number... 7 strips Straightening rollers 8 pcs. Coil weight.. 7,000 kg Rewinder .. 7,000 kg

Longitudinal cut-to-length line Strip width 1,500 mm Band thickness. 0.5 - 3.0 mm Number of cuts . 5 pcs. Straightening rollers. 7 pcs. Coil weight.. 7,000 kg Rewinder ... 7,000 kg Facility consists of: -Pressing arm -Unwinder -Belt removal wedge - Straightening machine -Strip scissors -Cross shears -Band brake -Reel -Control panel -Electrical control

Key data: 2 mm

Slitting and cut-to-length line Sheet width. 1,500 mm Sheet thickness.. 0.4 - 4.0 mm Belch width 4 mm 700 mm Slitting 2.0 mm 4 pcs. Straightening rollers... 8 pcs. Coil weight 7,000 kg Facility consists of: - Bundle pallet truck -Decoiler -Loop control -Straightening machine -Strip scissors -Cross shears 1,500 x 4.0 mm - Electrical control. Line complete overhauled, new control, all defective parts replaced, part painted RA 60 11

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Strip width... 650 mm Band thickness 0.2-3.0 mm Coil weight.. 5 tons. Coil I Diam. . 400/500/600 mm Coil A Dia. 1,500 mm Yield strength... 700 N/mm2 Strip width.. 10 - 250 mm Speed 150 m/min. Working direction.. right/ left Facility consists of: -Decoiler -Belt removal wedge -Scissor breasts 2 pcs. -Scrap wrapper -Band brake -Brake rollers 2 pcs. -Reel -Separation arm -2 control panels -Electrical control cabinets -Central hydraulics -Tools Plant dismantled in workshop

Slitting line Stainless Steel Strip width.. 500 mm Belt thickness... .02-3.0 mm Coil weight. 5 to. Speed 150 m/min. Minimum belt width.. 13 mm Strip number 10 Coil I Dia. 400 / 500 mm Shaft diameter.. 145 mm Control... Siemens S 5 Facility consists of: -Coil car -Uncoiler + Snubber roll - Pieler table -Paper Wrapper -Edge controll system -Pinch roll -Scrap shear - PVC coating unit -Side guide 2+2 rolls -Slitting head -Roll table -Scrap winder -Tension unit -Recoiler, separator shaft -Paper wrapper -Turnstile 2 arms -Electrical & Automation system -Camera system

turning diameter: 420 mm turning length: 3.123 mm control: MORI SEIKI MSX-850III turning dia. over bed: 995 mm swing diameter over slide transversal: 825 mm dist. between centers: 3.200 mm x-travel: 280 mm z-travel: 3.170 mm feeds: X.Z 30.000 mm/min spindle nose: JIS A2-8 turning speeds: 3.000 U/min spindle passage: 105 mm forward bearing diameter: 160 mm spindle drive: 28 kW Torque: 3.365 Nm turret head: pos. 12 tail stock: weg tailstock quill diameter: 150 mm quill stroke: 150 mm tailstock taper MT: MK 5 total power requirement: 54 kVA weight of the machine ca.: 13,5 t dimensions of the machine ca.: 8.147 x 2.58 x 2.390 mm Equipment - Hydraulic 3-jaw chuck Ø 400 mm - Chuck type SCHUNK THW 400-120 - Quick jaw change system for chuck - Hydraulic steady rest SHW type SLU-3.2-ZS - Steady rest capacity 50–200 mm - CNC longitudinal movement of steady rest (A-axis) - Automatic tool me ...

turning diameter: 255 mm turning length: 500 mm control: FANUC 31i model B Drive tool: 18Kw spindle drive: 15/11 und 7,5/5,5 kW rapid traverse Z-axis: 20 m/min rapid motion - y-axis: 12 m/min rapid traverse X-axis: 16 m/min rapid traverse X-axis: 16 m/min spindle nose: A2-8/A2-6 bar material dia.: 66 mm centre distance: 639 mm Chip coveyor: swing dia.: 270 mm total power requirement: 65 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 2,85 x 2,2 x 2,05 m -Two 12-station turrets (24 positions total), each with 12 driven tool stations -Y-axes on both turrets -Sub-spindle travel: 635 mm -Sub-spindle rapid traverse: 30 m/min -Travel – X (Turrets 1 & 2): 190 mm -Travel – Y (Turrets 1 & 2): ±40 mm -Travel – Z (Turrets 1 & 2): 500 mm -Spindle speeds – infinitely variable (S1 / S2): 4,000 / 5,000 rpm -Spindle bearing diameter: 120 / 100 mm, C-axis: 0.001° -Turret 1 s ...

Number of motors: 1 Stück 0: , mm Control: , 0 cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Ma ...

Roll Splitter Guillotine RGS50 Used machine in good condition, partially overhauled immediately ready for use Year of Make: 2014 Drive power: 15kW Cutting force 2x25to Knife length: 2500mm Max aperture. 1600mm incl. base frame and feed table Work/feed height 1200mm Two-handed operation PLC supported

Manufacturer: ADIGE Model No.: LT652 Year: 2001 Condition: Used Stock number: 9501 Laser ON: 68426 h Beam ON: 18365 h Laser power: 2.5 kW Tube diameter: 12-140 mm Source: Rofin Sinar DC025 In 2013, a general overhaul was carried out directly at the manufacturer's premises. Equipment: Suction Cooling system Automatic loader (6.5 m) Unloader (3.5 m) Belt unloader for short parts 2 bezels

Roll splitter RGS25 New device, immediately available and ready for use for shredding paper and film rolls. Drive power: 7.5kW Cutting force: 25to Knife length: 1500mm Max. opening: 800 -PLC Siemens S7 -Emergency stop ripcord on both sides -Safety interlock

Manufacturer: PIERCE Model: RUR 2000 Year: 2016 Condition: Used Stock number: 9505 Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 25 mm Plasma Source: Formica 130 Plasma can also be burned using the oxygen-fuel process up to a layer thickness of 100 mm. Equipment: Suction Kompresso Wrykrys Program

Polar N 92 Plus High Speed Cutter Age: 2013 Performance: 45 cycles/min Counter: only 529.438 cuts Working width: 92 cm Equipment: Air Side tables Chromed Air Table 18.5" color display Touch Screen Operation Automatic Programs for a highly automated Process Polar Optiknife Photocells In very good condition 2x extra knife

Perfecta Seypa 115 UC-2 SM Age: Around 1995 Cutting width: 115 cm With Programs Chromed Air Table Chromed Air Side tables Jogging Table 2x Extra knive

Mohr 56 ECO Programmable Cutter with hydraulic drive Age: 2012 Cutting width: 56 cm 5.5" monochrome display Programming options with memory capacity of 198 programs Smooth stainless table Bright LEDs mark the cutting line

5 AXIS FIBER LASER 3000w Fiber 3000 x 1300 x 600mm

CIDAN QLA-PROFI slitting and cut-to-length line is designed for the efficient machining of sheet metal fed from a coil. It enables the slitting of material with a maximum thickness of 3 mm into strips of a specified width, as well as cut-to-length into sheets with a maximum length of 1550 mm. The combination of both cutting methods in one process enables the efficient preparation of the material for subsequent machining stages while maintaining high dimensional accuracy and repeatability. The CIDAN QLA-PROFI 1550/1,5 coil slitting line consists of machines built between 2008 and 2011, which were combined into one complete system in 2023. It includes: – 5t sheet metal decoiler – CIDAN QLA-PROFI cutting unit with straightening and feeding rolls, circular knives for slitting and a guillotine for cut-to-length – SPX-20/130-2C hydraulic table – sheet metal recoiler – scrap r ...

Offer 26289 Technical data approx. : - CNC flame cutting machine with 2 burners as shown - 2 burner heights + tilt adjustable - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 T - Without support table

Polar 92 ED Guillotine Age: 2000 Working width: 92 cm With Color Display Programs Chromed Air table Air Side tables Light barrier Extra knives Comes with Polar L-600-W-3 Lift

Perfecta 92 UC High Speed Guillotine Age: 2001 Cutting width: 92 cm Programs Color Display Chromed Air table Chromed Air side tables (Left and Right) Machine comes with 2 extra knife HSS

Offer 26293 Hydr.- Horizontal – Two Column Guided Mitre Band Saw Machine Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, one mitre adjustment left + right with clamping - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting area - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Mitre adjustment with digital degree display - Discharge roller conveyor with dimension stop 6000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 1500 x H 1850 x D 2100 mm - Weight approx. 1500 kg

FALCON S4020 6 kW fiber laser was built in 2025 in China by FFG CHINA CO., LTD. The machine was launched in March 2026 and has been in operation for a small number of hours. It is covered by a valid warranty until February 2031. This fibre laser belongs to the FALCON S Masterline series, developed for users seeking high performance while keeping operating costs low. The machine is designed for the precise cutting of large sheets of metal with a maximum thickness of 30 mm. Cutting is performed using a fiber optic beam generated by a high-performance ULTRON 6 kW laser source. The narrow focal spot, combined with high energy density, ensures precise material machining with minimal thermal deformation. The fibre laser technology also offers greater energy efficiency and performance compared with other cutting methods. The FALCON S4020 features a BOCHU 3D cutting head with a range of us ...

Wohlenberg 92 MCS-2 TV-2 Age: ca. 1990 Working width: 92 cm With Programs Chromed Air table Side tables Light barrier In good working condition

CNC laser cutting machine Type: TruLaser 3030 Manufacturer: Trumpf Year: 2010 Control: Siemens Laser: TruFlow 2000 Laser power: 2000 W X: 3000 mm Y: 1500 mm Z: 115 mm Max. sheet size: 1500 x 3000 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details.

1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equ ...

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 500 mm center height over bed: 140 mm centre distance: 500 mm bed width: 205 mm spindle bore: 40 mm turning speed range - stepless: 30 - 4.000 U/min 3-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 4,0 kW taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 85 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,40 x 0,95 x 1,55 m - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 863.32 € : 1 : 45200 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accordin ...

Granulator, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 75 kW Hopper: Conveyor belt hopper Working width: 1000 mm Rotor diameter: 600 mm Year of manufacture 2015, overhauled with - New rotor - New funnel - New base frame Application examples: Crushing of massive lumps, start-up chunks, profiles, beverage costs, boxes, vegetable crates,...

TRUMPF TruLaser Tube 7000 laser cutting machine equipped with a 2.7 kW TRUMPF TruFlow 2700 laser source. Year of manufacture: 2011. Serial number: A0441A0073. Designed for cutting round, square, rectangular tubes and structural profiles. Maximum tube diameter: 254 mm. Maximum feed length: 6,500 mm. Maximum discharge length: 6,500 mm. Minimum tube section: 12 mm. Equipped with automatic material loading and unloading system. TRUMPF TruFlow 2700 2.7 kW laser source. Power supply: 3 × 400 V / 50 Hz. Operating hours (Power ON): approximately 49,700 h. Laser ON hours: approximately 48,030 h. Includes control console, electrical cabinet and automatic tube handling system. High productivity machine, especially suitable for machining tubes and metal profiles with high precision. Auction-ID: A7-49809-7

table width: 3000 mm table length: 1500 mm burner heads: 1 Control: CNC feed: 20.000 mm/min total power requirement: 15 kVA dimensions of the machine ca.: 4,5 x 2,5 m Heavy machine bed with precision guides for quiet movement machine A ball bearing cross carriage for height adjustment with 400mm vertical Hub Thermal separation of the drive and cutting areas ensures the highest precision Automatic height finding and torch height control during cutting Torch holder with collision protection and automatic shutdown in the event of a collision Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, o ...

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 1500 kg traversing speed: 200 m/min total power requirement: 55 kW dimensions of the machine ca.: 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 40 mm STAINLESS STEEL 40 mm ALUMINUM 40 mm BRASS 16 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

Omga Radial 600P3S Manufacturer: OMGA Type: Radial 600P3S M.Nr: 163864 Max. saw height: 90mm Max. saw length: 505mm Saw diameter: ø300mm Saw spindle: Ø 30mm Motor: 3 kW Speed: 3000 tpm Dust extraction: 80mm Weight: 190 kG Condition: functional

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222415 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested