cut off saw used for sale

With possibility to add vacuumpump., Bowl: 44 litres, Capacity: max 30 litres, Knives: 3 speeds on knives, max 3000 RPM, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 550 x 800 x 1200 mm, Weight: 150 kg

Command 1000K controls, With lifter and unloader for 200L tote bins, Temperature sensor, Bowl: 200 litres, Knifes: 6 variable speeds, Bowl speed: 2 speeds, Mixing: 2 reverse mixing speeds, Power: 3 x 400V, 50Hz, 108kW, Dimensions: 2500 x 3000 x 1800 mm, Weight: 2900 kg

With unloader, water dosing and tempurate indicator, Bowl: 2 speeds, Knives: variable speeds, Steam: 1.5 Bar, 55 kg/h, Vacuumpump: Elmo 2BV2071, 125 m³/h, Power: 3 x 400V, 50Hz, 50kW, Dimensions: 1750 x 1950 x 2000 mm, Weight: 1700 kg

With double lifter for 200L tote bins and unloader, Bowl capacity: 750 litres, Knife speed: variable, 60 - 3300 RPM, Mixing speed: 150 RPM, Bowl speed: 4, 7, 10, 14 RPM, Power: 3 x 380V, 50Hz, 273kW, Compressed air: 6 - 10 Bar, Water: 2 - 6 Bar, Dimensions: 4330 x 3700 x 3050 mm (open lid), Weight: 7900 kg

Including unloader and BW200 loading device, With water counter., Only 3586 hours., Bowl: 325 litres, 2 speeds, Knife speed: 6 steplessly programmable speeds, Mixing: 2 reverse mixing speeds, Controls: Auto-Command 1500K, Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h, Compressed air: 6 - 10 Bar, Water: 4 - 6 Bar, Power: 3 x 400V, 50Hz, 157kW, Dimensions: 2600 x 3650 x 1700 mm, Weight: 4300 kg

Fully reconditioned Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top slide and a bottom valve. Framework, lid and side covers are all made of stainless steel. The bowl is equipped with a single jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, temperature sensor in the product, 3x double cutting knives, max. working pressure in the bowl -1 / 0.3 bar (protected with pressure relief valve), maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x hydraulic inlet slider at the top for the main product, including large funnel, 1x outlet valve at the bottom for the outlet of the finished product, 1x connection for pneumatics controlled ingredient valves on the side of the ...

Seydelmann Bowl Cutter -Type: K 126 H AC 8 -Power: 86 kW -Capacity: up to 3000 kg/h -Bowl capacity: 126 liter -Continuous speed control -Maximum knife speed: 5250 rpm/min -Touchscreen control panel -Original electrical cabinet -Knife set included -Working hours: 1800 -Year of manufacture: 2016 -Cutter dimensions: 2650 x 1800 x 2300 mm -Cabinet dimensions: 1650 x 600 x 2150 mm -Made of stainless steel -Condition: Used in very good condition, ready to work

Sharp TC11 Table Cutter Volume: 11 litres very good condition completely in stainless steel 2 courses 3 cutter head Machine comes from a hobby butcher who gave up for reasons of age despite its good condition, the device must be thoroughly cleaned before use Video about test run available

Seydelmann K60

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top valve (DN125) and bottom valve (DN125), lid, frame, side covers are all made of stainless steel. The bowl is equipped with double jacket for heating/cooling on the jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, 3x double blund knives , max. working pressure in the bowl -1 / 0.3 bar, maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x valve at the top for the main product, 1x outlet valve at the bottom for the outlet of the finished product, CIP Spraybowl inside the bowl, 1x connection for pneumatics controlled ingredient valves on the side of the bowl with valve. Vacuum tank on top. Double-walled lid with scrap ...

Manufactured in Germany Plate volume 45 liters; Set with plexiglass noise-canceling cover. Power 9/ 11 KW. The machine is completely factory renovated by MM SERVICE , with 1 year warranty and delivery, installation, samples and training included in the price.

Cutter LASKA KR – 60 liters Manufacturer: Austria Power: 16.4 kW The machine is available has been completely factory refurbished and is with a 1-year full warranty. The price includes delivery, installation, samples and training.

The machine is completely factory renewed; • 1 year warranty; • Delivery, installation, samples and training are included in the price.

Cutter K+G Wetter – 90 liters, set with emptying device Power supply: 400 V, 3 phases, 50 Hz Power: 34 kW Current: 70 A Material: -stainless steel Volume: 90 liters Dimensions: 1300 mm x 1900 mm x 1650 mm The machine is available after it has been completely factory refurbished and with a 1-year warranty. The price includes delivery, installation, samples and training.

Cutter ROBOT COUPE – universal vertical cutter with tilt and automatic emptying Volume: 30 liters; Power: 5400 watts; Power supply: 400 volts; Frequency: 50 hertz; Power: 3 horsepower; Overall external dimensions: 740 mm × 550 mm × 1230 mm;

Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type Butcher boats Height 1600 mm Width 3300 mm Length 2000 mm Weight 3200 kg Total power 91 kW Cutter Type Bowl Cutter Cutter Stainless steel, acid-resistant Construction of the cutter bowl Stainless steel, acid-resistant Bowl capacity 200 l Number of knives on the head 6 pcs. Knife shaft speed 250-4800rpm Bowl speed 1-30rpm

Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type Butcher boats Height 1200 mm Width 1300 mm Length 1350 mm Capacity 70 l Electrical Supply: 400V 50Hz 3N Total power 23 kW Main Material Stainless Steel, Acid Resistant Cutter Type Bowl Cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 6 pcs.

Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specially designed for the precise, process-reliable cutting of stainless steel pipes (e.g. for fuel, brake, air conditioning or hydraulic lines). The system has optical laser marking detection. The control panel can be used to choose whether the cut is triggered mechanically (e.g. on the back of a union nut) or fully automatically via the optical detection of a laser mark applied to the tube. Thanks to the integrated rotating 3-jaw cutting head and a micro spray unit (minimum quantity lubrication), machining is extremely gentle on the tool. The pipes remain almost completely dry and free of coarse dirt. The entire process from insertion to clamping, separating and depositing is highly automated in a material-friendly cycle process. Fully integrated ...

Alpina PB 330 incl. loader + unloader, in checked working condition

Hoegger Alpina PBV 330 Vacuum Bowl Cutter incl. loader+ unloader 5 years ago machine was refurbished by alpina

The table cutter pictured is sold by Alexanderwerk with a bowl volume of 20 litres and an H82 meat grinder. The cutter has a stainless steel body and two speeds. It was used by a hobby butcher to make boiled sausage. He gave up sausage making and therefore sold his equipment. The cutter head can be removed for cleaning and so can the grinder's attachment. It is also possible to connect a vegetable cutter from Alexanderwerk (UMA) here. A self-made base frame is available on request. The cutter shears a little, because the lid rests on the bowl, if you lift it slightly, the skidding is gone. A video about the test run is available The machine should be thoroughly cleaned before use.

Lot of 16 assorted industrial milling cutters in various diameters and widths. Visible markings include FRANKEN 4050-125, HSS-ECo5, DIN 1880, Fette 125×56 NR Sp. 900 / F14790600, and other cutters marked F14790600, F14790500, etc. Predominantly keyed-bore shell/side-and-face cutters, including coarse-tooth and helical-tooth designs. Auction-ID: A7-50717-211

Filiz H2216K CNC Fabric Cutting Machine Automated CNC cutting system for flexible sheet and fabric materials, equipped with a large vacuum cutting table, travelling gantry, motorised cutting head and material roll support/unwinding system. Manufacturer: Filiz Makine San. ve Tic. A.Ş. Model: H2216K Configuration: Vacuum cutting table, travelling gantry, motorised cutting head, roll support/unwinding system and cable carriers Controls: PC-based operator station with nesting and cutting software Additional equipment: Pneumatic components and emergency stops Condition: Used Approximate dimensions: 6,500 × 3,000 × 1,800 mm Approximate weight: 2,500 kg All descriptions are indicative only. Auction-ID: A1-50546-48

Used veneer guillotine shear (veneer cutting machine) MONGUZZI, Italian made, ref. N0052/3454. Designed for cutting veneer sheets in a straight line with precision. Cutting length: 2600 mm. Hydraulically operated clamping beam that holds the veneer sheet during cutting. Motorised back gauge (guide) for fast and accurate adjustment. Condition: used, in working order. Auction-ID: A7-50988-121

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling

The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

; operational

; ready

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50