cut bar used for sale

cutting machine 2007 width 115 cm with monitor touchscreen USB interfaces CIP3 + CIP4 compatible ethernet interface Saddle Positioning via Joystick ergonomically arranged Two-Hand Operation press beam stop function programmable pressing force automatic pressing safety light grid plexiglass protection on the rear table stainless steel tablework surface air table side air table in production available: immediately located: Germany

Ref. No. 00891 Name of the Tube Laser Cutting System Manufacturer: BLM Adige Model LT 652/B Year of construction 2002 Laser power 2000 watts Loading length Unloading length Loading length 6500mm and unloading length 3500mm. In 2024, 40,000 euros were invested Operating hours 3 shifts Computer 127,653h Heating HF tube 62.850 h High voltage 119,453 h From order confirmation at the time of purchase Lasertube LT652 Automatic feeder for pipes between 3200 and 6500mm Fully automatic pipe support and unloading device for pipes up to 4500mm Siemens Sinumerik 840D control system Teleservice incl. modem CO2-Slab-Laser Model DC020 Kompakt, Fabr. Rofin Sinar Hamburg Integration RF DC020 Compact Laser Cooling Unit Fine dust filter, Fabr. Donaldson Torit Universal AK-HP Cutting Head, Fabr. Precitec Gaggenau Precitec Interchangeable Cassettes AK-HP 5" HP ZNSE 5"  ...

Manufacturer: Messer Griesheim Model: Lasermat 4200 Year of Manufacture: 2011 Type of Machine: Laser Cutting Machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Web width: 520mm Voltage: 400V+IV+PE Current: 20A Control voltage: 24 V DC Air pressure: 6 bar

Paper cutting machine with 39cm cutting width. cleaned and checked

Jac Bread Gate Bread cutter 9mm cutting thickness speedswitch with protective cover front and back Emergency stop switch 380V 50Hz on casters Height: 130cm Width: 60cm Depth: 60cm

Treif Discus Circular Knife Machine Type: Discus 400 digital control Circular knife Cutting width adjustable from 4mm to 18mm 400V 50Hz Stainless steel cladding Weight approx. 200 kg Operating voltage 400 volts Control voltage 24V/DC V AC Nominal power 0.9 kW Circular knife with Teflon coating Height: 110cm Width: 80cm Depth: 70cm

- Color display - Program - Air table - Resopal side table left+right - Jogging table with air - Spare knife

Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm

Used HydReclaim Film Recycling System Manufacturer: AEC inc. USA Model 812 Electricity: 400 VAC, 50-60 Hz, 3-phase AEC Hydreclaim fluff weigh system Model 50 cubic foot

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

MITSUBISHI ML3015eX PLUS laser cutting machine was built in 2019 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine, distinguished by the use of the most advanced technology available on the market, is an excellent choice for precision cutting of sheet metal made of, among others, steel, aluminium and copper. Workpieces with a maximum length of 3050 mm and a width of 1565 mm are machined by means of a reliable head with auto focus, which is powered by a 4.5 kW laser beam. The laser beam is generated by electrical discharges in a special gas mixture with a relatively slow flow and in a direction perpendicular to its axis. Real-time power monitoring, combined with a constant beam length, ensures the highest cutting quality over the entire work area and prevents power deviations of more than ± 1%, which are necessary for machining highly reflective materials. The entire machining  ...

EDM machine Makino DUO64 vintage 2011.

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

Cutter Manufacturer: Laska Stainless steel Capacity: 130 liters Dimensions: 1600x1600x2500mm Voltage: 400V / 50Hz / 3N Power: 61kW

Laser cutting machine Trumpf Trulaser 3030

Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm

Inv. Num. : 8766 Type: SPITFIRE 1500 Producer: Pierce Created: 2012 Parameters: Software: Lantek Expert Duct Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 15 mm Plasma Source: HYPERTHERM 85A Machine height: 1400 mm Machine length: 3650 mm Machine width: 2520 mm Equipment: Exhaust fan

Inv. Num. : 8767 Type: Trumatic L3030 Producer: Trumpf Created: 2007, GO 2023 Parameters: Hours: 6099 h Switch-on hours: 12949 h Laser power: 3200 W Work table length: 3000 mm Work table width: 1500 mm

Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife

Advanced programmer Central air table Side tables with air Photocells CE Hydraulic drive of the pressure beam with fully adjustable force Cutting line Rear table cover opens for easy cleaning of the machine Spare knife Chrome table surface anti rust Cutting sticks, operating tools, paper tapping block, documentation. Technical data: Working width 920mm Stack height 120mm Weight 1720 kg 380V power supply Complete cleaned, checked and tested In full working conditions

amount: 1 STK Tool holder These chucks are designed for high-speed machining. These are precision tools from the Italian company DAndrea The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ADIGE Model: LT652/B Year of Manufacture: 2002 Machine Description: - Tube laser system LT652, manufactured in 2002. - Equipped with a CO2 laser source with 2 kW power. - Loading length: 6500 mm - Unloading length: 3500 mm The machine is in good technical condition for its age. The cooling system requires occasional maintenance. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Core diam.: 230 mm // Material Type: Cardboard, pvc, pp , pe and hdpe cores

S. No.: 511.1012.471 Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Manufacturer: PEAFFER Model: P160 H/I Power: 8 HP Voltage: 380 V Phase: 3 Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Inv. Num. : 8772 Type: TruLaser 3030 L20 Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 35157 h Switch-on hours: 55771 h Laser power: 3.2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Feed length Z-axis: 150 mm

- Display - Program - Air table - Side tables - Jogger - Spare knife

Cutting table SEEWER RONOD, type: SFT 362, A23 -refurbished- - Cutting table for pastries - Cutting section - with some cutting blades and cutting rollers -Reel More information on request. Visits and test runs are possible by arrangement.

Seydelmann - Bowl cutter Bowl cutter Manufacturer: Seydelmann adjustable knife speeds 2 mixing speed 2 separate bowl speeds Completely made of special stainless steel 200 liters bowl volume made of stainless steel Dimensios: 300x250x200cm Power: 110 kW Net weight: 2880 kg

The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm., SWISS QUALITY MANUFACTURING, Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., R ...

1 POLYTEX pinking machine type ZH (Zigzag cutting) knife width 500 mm, serrated knife with 5 mm serration gauge, stroke 50 mm,

turning diameter over bed: 360 mm turning diameter over slide rest: 180 mm turning length: 900 mm turning speed range: 25 - 1600 U/min total power requirement: ca. 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 HOZA pinking machine type ZM 50 (Zigzag cutting), cutting width 500 mm, serrated knife with 4 mm serration gauge, manual actuation

1 POLYTEX "Waterfall Sample" Mounting Machine type FC, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC).

1 POLYTEX pinking machine type ZP-V (Zigzag cutting), knife width 1020 mm, machine equipped with FASNACHT security light guards, stroke up to 65 mm height, up to 50 cuts per minute, PLC and inverter controlled. Fully automatic electric double feed system with 2 programs for simultaneous prechoice of sample length and width. Ensures highest degree of accuracy and operating comfort. Machine delivered with all possible extras/options namely: cutting height adjustment 0-1-2 mm (with or without carton underlay), increased hold-down force with hydraulic speed regulators, reinforced laser pointer.

1 POLYTEX "Waterfall Sample" Mounting Machine type FB, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC) and touch screen. sample size width infinitely variable up to 800 mm, unlimited length, output single ply up to 900 stripes per hour, output two-ply up to 450 stripes per hour,

1 SUCHY fabric winding and cutting machine, year of manufacture 2015, roller surface width 220 cm, Unwinder with pneumatic expanding shaft for cardboard cores, Inspection station, Cross-cut knife holder (for manual cross-cutting), Rewinder with pneumatic expanding shaft for cardboard cores, Speed: 0–50 m/min

1 KAPPA pinking machine type 51N (Zigzag cutting), knife width 500 mm, power driven swatch and sample cutting machine, serrated knife with 4 mm serration gauge, year 2022, precise and accurate thanks to mechanical movement of the cutting board (turn wheel), exchange of knife is effortless and fast, motor 1,5 kW (2 HP)

1 HOZA (Germany) pinking machine type EZM 60 (Zigzag cutting), knife width 600 mm, electrically actuated, year 2019, laser for cutting line indication, machine controlled per PLC, knife with 4 mm serration gauge, up to 30 cuts per minute, 3 x 380 V, 50 Hz,

table length: Rohmateriallänge 6500 mm table width: Rohrdurchmesser max. 230 mm burner heads: 1 Control: CNC workpiece weight: 300 kg traversing speed: 91 m/min weight: 5750 kg dimensions of the machine ca.: 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding dev ...

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

turning diameter over bed: 800 mm turning diameter over slide rest: 540 mm turning length: 4000 mm centre height: 400 mm centre distance: 4000 mm spindle turning speed range: 9 - 1140 U/min weight of the machine ca.: 8,0 t - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 600 mm gear width: 450 , 600 mm module: distance gear spindle / pinion head: 40 - 450 mm distance pinion spindel head / gear head: -160 - 600 mm axis adjustment +/-: 60 mm spindle turning speed - stepless: 1 - 2120 U/min spindle bore: 130 mm taper in main spindle: MK 60 total power requirement: 30 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 2,8 x 1,8 x 2,1 m Bevel gear testing machine, 2 flank testing! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm Number of working hours: 19.552 h Cutting time: 10.704 h spindle drive: 18,5 kW total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning length: 1250 mm centre height: 230 mm centre distance: 1250 mm spindle turning speed range: 35 - 1800 U/min weight of the machine ca.: 2,7 t Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm

Used machine in good condition. Available for immediate delivery. - Laser type: CO2 - Working area (X x Y x Z): 3,000 x 1,500 x 115 mm - Max. working weight: 900 kg - Positioning speed X / Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser power: 6 kW - Thickness of the iron max: 25 mm - Thickness of stainless steel max: 25 mm - Thickness of the aluminium max: 15 mm - TRUMPF Liftmaster loading and unloading unit (Liftmaster currently not installed)

turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 2100 mm centre height: 250 mm : mm spindle bore: 60 mm spindle turning speed range: 11 - 2000 U/min total power requirement: 7,0 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 4,3 x 1,2 x 1,3 mm Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross rung milling machine Make Stegherr Type KSF 2/4 with milling cutters Suitable for milling cross bar joints on e.g. windows, doors and furniture equipped with 3 milling units one upper and one lower milling unit each mill the two mitre-like recesses in unison and a third aggregate at the same time the plating The machine table is moved pneumatically-hydraulically. The forward and return speed is adjustable. With foot control 2 motors each approx. 2.2 kW Connected load approx. 4.5 kW Pressure 6 bar Voltage 380 V 50 Hz Suction nozzle diameter 180 mm

Manufacturer: Trumpf Model: TruLaser 5030 Year of Manufacture: 2010 Operating hours: 57,876 h Known defects: Collision protection; cutting unit cannot be pushed back into the correct position; repair or replacement is necessary. It includes also a Liftmaster : Year of manufacture: 2015 (retrofitted) Operating hours: almost none Known defects: none Find more here - .ucymachines/ Contact us at - sales@ucymachines