127,250 used machines on RESALE, but how to find them? Machine Search
Unwinding reel / decoiler â?¢ Bandwidth / strip width max. 1,500 mm â?¢ Tape thickness / strip thickness (430 N/mm2) 0.5-2.0 mm â?¢ Coil outer diameter / coil outer - 1,300 mm â?¢ Coil inner diameter / coil inside - 470-520 mm â?¢ Coil weight / coil weight 10,000 kg â?¢ Side shift / side shift . . . . . . . . . . . . . . . . .
cutting plotter dmsDIGITAL SINAJET DT0906-MT with delivery Specifications: • Machine is already dismantled and stored • Functions (possible in one operation) -Cut - Cutting/scoring -Grooves - Draw/mark • Integrated tools - Tungsten carbide tangential knife for material up to 6 mm, actively rotating - Cutting tool for thin material/slitting tool, rotating (drag knife) - Creasing tool or perforation tool, actively rotating -Pin Accessories: • dmsDIGITAL BAS 70 stand-alone storage system with sensor-controlled speed adjustment, automatic Height adjustment of the stacking table and PLC control • CCD camera for reading registration marks • Prepared as standard for the use of an oscillating knife • TCC automatic tool calibration for tangential knives and oscillating knives • Ehternet connection • Graphic Interface on PC interface (PC must be provide ...
Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg
Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!
Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL
CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Schröter Type: wafer cutting machine wafersize: 360 x 450 mm product high: max 5-80mm Output: approx. 5 double cut´s electrical: 400 V, 3 Ph different: automatic cutting machine for rectangular wafer, with a longitudinal and a cross-cut, wafer holder, retainers and 2 pcs cutting frame, first cut strip width 32 mm / second cut strip width 30 mm We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.
Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee
Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!
Key data: 800 mm
Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...
PETEWE optical tool and profile grinding machine PF 3S Projection area: 440320 mm max. grinding stroke: 15-105 mm Stroke number infinitely variable: 0 - 150 rpm. max. grinding wheels through: 175 mm Spindle speed infinitely variable: 5,000 rpm Swivel range grinding head in the horizontal X plane: x 15° side Y plane: . . . . . . . . . . . . . . vertical Z plane: -2° to +10° Grinding head slide movement in X direction: 120 mm in Y direction: 90 mm Adjustment of werkstuecktraeger in X direction: 160 mm in Y direction: 160 mm Sine-mounted clamping plate Clamping: 150 mm 230 mm Sine setting: 0-30°
Cone cutter and profiling machine First working area - OPENING TABLE WITH TRANSPORTBAND Length: 2600 mm, adjustable speed, inverter controlled. Second work area: PRODUCTION AREA Group of eight with movable longitudinal slide and cone cutter unit, numerically controlled. MULTIPLE CONE CUTTER UNIT: Motor with 7.5 HP, 3000 rpm, inverter-controlled, Spindle diameter: 50 mm, length: 270 mm WORKPIECE RETURN
-Circular knife bread cutting machine -Cutting width 400mm -Note thickness adjustable -Built in 2015
For sale is a laser cutting machine TruLaser 3530. technical data: Additional details - Operating hours: Beam-On 2030 h/Laser-On 9814 h - X travel distance 3000 mm (max. 3104) - Y travel distance 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel distance 114 mm - maximum material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - maximum positioning speed axle parallel 120 m/min - Simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y axis 15 m/sec. Standard - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet changer - Closed beam guide - NitroLine, high-pressure cutting - FocusLine, constant focus position - Comp ...
Laser cutting machine Trumatic L3030 Manufacturer: trump BJ: 2005 Max workpiece length ... 3000mm Max. workpiece thickness ... 1500mm Max sheet thickness ... 12mm Laser power ... 2000w Total power demand ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.
Thread edge with extensive accessories, by hand or automatically to use. Table model, mobile also for the construction site Manufacturer GF Georg Fischer Table model with electric drive or by hand. Automatically opening thread cutting head Threaded jaws for: 1/2 inch, 3/4 inch, 3/8 inch, 1 inch, 1 1/2 inch, 2 inch Machine in transport box (steel) Rems Tornado Klauke Rothenberger Supertronic Special price
TECHNICAL DATA: Max working length mm: 3100 Min workable length mm: 500 Tilting blade: 0-45 ° Blade diameter max mm: 300 02 Saw aggregates Ø 300 + 02 Scoring aggregates - Ø 120 Central Saw Aggregate Automatic destacking 4-axis numerical control Total electric power KW: 10 Weight Kg: 2200
Chassis number 50145 Year of construction 1991 Voltage 380V / Freq 50 Hz An automatic cutting table specifically designed for cutting laminated glass (with PVB or EVA). Below you'll find the key specifications and features. Technical specifications Machine type: Automatic cutting table for laminated glass (PVB/EVA) Maximum glass size: approx. 3300 mm Processable thicknesses: from 3+3 mm to 10+10 mm Cutting head: CNC controlled Automatic pressure adjustment depending on glass thickness Simultaneous cutting of both glass layers Breaking system: Breaking bar for mechanical breaking Thermal separation via linear resistance (heating element) Cutting accuracy: ± 0.3 mm Work surface: air cushion table (air float) for easy glass transport Control & programming: Input of cutting formats and patterns Possibility to upload files (CNC programs) Machine dimensions: approx. 36 ...
The Bottero 301C is a laminated cutting table, specifically designed for cutting and separating laminated glass. Key specifications include: weight approximately 2.8 tons, power 10–11 kVA, max. cutting length 3400 mm, glass thickness 3–10 mm (monolithic up to 19 mm), 380V/50Hz connection. Technical specifications Bottero 301C Brand / Type Bottero 301C Chassis number GG301C-6708 Year of construction 2000 Machine type Cutting table for laminated glass (semi-automatic) Weight ± 2,800 kg Power 10.9 kVA – 50 Hz Electric 380V connection Machine dimensions: Length 4900 mm, width 3350 mm, working height 930 mm Transport dimensions approx. 4.2 × 2.4 m + 4.8 × 1.0 × 1.6 m Glass thickness range 3 – 10 mm laminated, 33.1 – 66.2 mm PVB; monolithic up to 19 mm possible Max. cutting length 3400 mm Functions Cutting, breaking and separating lami ...
MAZAK CO2 Laser Cutting Machine STX510 MKIII 4kW -made in Japan- ! SOFORT EINSATZBEREIT ! over-recovered, very well-preserved MAZAK laser machine with 4000W Panel size: 3000mm x 1500mm minimum set-up area of 2.9m x 7.3m Puncture sensor Plasma sensor Burning Sensor automatic nozzle change Small parts conveyor belt Ball roller table Fast-punching fully encapsulated machine cover Cast bed, no foundation needed FE: up to 20mm VA: up to 15mm ALMG: up to 10mm Plastic, wood cutable incl. CAD / CAM Software 2020 Version incl. 12 months warranty (within Dtl.) incl. delivery incl. commissioning + training Testing under electricity ready for delivery immediately immediately ready for use =optional with fully automatic loading and unloading MAZAK CELL=
The Bottero 131BMK is an automatic float cutting table for flat glass, designed for straight-line cutting. Below you'll find the key technical specifications and features. Technical specifications Bottero 131 BMK Machine type: Float cutting table (monolithic glass) Brand/Model: Bottero 131 BMK Year of construction: 2000 Chassis number: GG60KB-6011 Weight: approx. 2,250 kg Power: 14.2 kVA Power supply: 380 V / 50 Hz Air pressure: 3 bar compressed air required Maximum speed: 80 m/min Glass thickness: 2 – 18 mm Maximum glass size: 2550 × 3300 mm Capacity: Straight cutting, no shaping/cutting of complex patterns ⚙️Features Automatic cutting table with CNC control for straight-line cutting. Optimization software (depending on version) for cutting patterns. Pneumatic scoring system suitable for float and low-e glass. Robust design for long-term industrial use. ...
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2007 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2006 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads Bjgcgttd8s incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Fiber Laser Machine HLF Power: 4kW Sheet metal size: 3000 x 1500mm Alternating table Sheet metal layer detection Siemens touchscreen control with LAN/USB Siemens Drives Precitec Auto Focus Procutter Cutting Head THX Guided Tours IPG resonator with 4kW is included: Guarantee CAD CAM Software Commissioning Delivery within Dtl Training offered
The Bottero 301C is a laminated cutting table, specifically designed for cutting and separating laminated glass. Key specifications include: weight approximately 2.8 tons, power 10–11 kVA, max. cutting length 3400 mm, glass thickness 3–10 mm (monolithic up to 19 mm), 380V/50Hz connection. Technical specifications Bottero 301C Brand / Type Bottero 301C Chassis number GG301C-164 Year of construction 1994 Machine type Cutting table for laminated glass (semi-automatic) Weight ± 2,800 kg Power 10.9 kVA – 50 Hz Electrical connection 380V Machine dimensions: Length 4900 mm, width 3350 mm, working height 930 mm Transport dimensions approx. 4.2 × 2.4 m + 4.8 × 1.0 × 1.6 m Glass thickness range 3 – 10 mm laminated, 33.1 – 66.2 mm PVB; monolithic up to 19 mm possible Max. cutting length 3400 mm Functions Cutting, breaking and separating lamina ...
3000 x 1500mm Truflow 5000w Auto nozzle changer Auto pallet changer
3000 x 1500mm / 5000w / Siemens 840 - Single Head Technology
The Bottero 353 BKM-R is an advanced float glass cutting table designed for loading, cutting, and breaking glass sheets. This model combines high precision, speed, and flexibility and is suitable for both series production and special pieces. Year of construction 2018 Chassis number: 30900400001784-01564_011 Plastic film cutter Glass thickness: 2 – 19 mm Maximum cutting speed: 150 m/min Maximum plate size: 3810 × 2750 mm Table type: tilting, hydraulically operated Air cushion system: centrifugal fans, MDF plan with felt Cutting bridge: steel bridge, placed transversely Rack and pinion system: gears facing downwards to prevent dirt build-up Cutting head: aluminum alloy, automatic glass thickness detection, proportional solenoid for pressure control Software: Shape Scanner, Sonar detection for special materials, BCMS Windows optimizer Machine dimensions: width 3596 mm, le ...
SCHNELL SHEAR LINE 300 rebar cutting and bending line was built in 2008 in Italy by Schnell S.p.a. The electrical installation was overhauled in 2024. The SCHNELL SHEAR LINE 300 is a reliable system designed for serial machining of rebar with a maximum diameter of 50 mm. It integrates all the necessary equipment that is responsible for cutting, bending, optimising, storing and handling bars. The entire production cycle, from feeding to the collection of the finished parts, is performed fully automatically. The SCHNELL SL 300 stirrup production machine is fully complete and consists of the following components: – control console – FA/6/14 storage rack for steel – SCHNELL CGS 300 HDY guillotine shears – SCHNELL VBM 12/2 measuring and cutting track with single-sided unloading – SCHNELL ROBOMASTER 45 automatic rebar bending machine – rebar storage and retrieval system ...
Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Year of construction 2023 With this motor-driven cutting machine, goods such as cables, pipes, hoses, steel cables, plastic profiles, etc. can be measured for length and cut off. The powerful feed makes it possible to pull directly from an unwinding system without a motor, such as a drum rack or drum unwinder. In conjunction with a pot wrapper, the cut-to-length goods are wrapped in rings. • Cutting machine for cables, wires, hoses and much more. Technical data AUTOCUT 40 Winding material Ø (deviating from conformity assessment) 1 - 30 mm Inlet height approx. 1000 mm Direction of passage from right to left L x W x H approx. 1160 x 950 x 1550 mm Height with open protective cover approx. 2050 mm Length with pot winder approx. 1800 mm
Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Fully automatic bread slicer MHS Type: MHS BASIC L Technical data: Cutting Gate Bread Slicer Cutting thicknesses: 10 mm Bread passage: H 17 cm x W 45 cm x D 34 cm Bread rack to bag 230 Volt / 0.75 kW / 3 A Weight: 200 kg Total dimensions: H 114 cm x W 59.5 cm x D 73 cm Mobile on 4 pulleys with 2 brakes Cuts almost all types of bread (including yeast braids) Soft feed for particularly gentle cutting Lubrication without oil pump Minimal maintenance costs due to high ease of maintenance Simply click out the used felt and dispose of it The new felt is simply hooked into the existing guide Year of Make: 2015 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Holtec parcel cross-cut saw Type: VARIOCUT SHK Year of Make: 1989 Parcel cross-cut saw with movable parcel roller conveyor Positioning control with length input with measuring point Stationary cross-cut unit Cutting width 1300 mm Package height 1200 mm Highest cutting accuracy thanks to saw set guided on both sides Input roller conveyor 5400 mm long Forward / return 2 speeds With 12 wheels Output roller conveyor 5000 mm long Forward / return 2 speeds With 21 wheels Electrical positioning control with length measuring point by means of measuring trolley Width of roller conveyors 1200 mm both roller tables driven Connected load 11 kW / 21.5 A Ready for immediate use and immediately available Dimensions 10700 mm x 2700 mm x H 3400 mm
Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...
MEGAPLOT OF1515 Roof Master EPS cutting machine was built in 2019 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine represents the MEGAPLOT Open Frame series, which has been specially designed for the efficient production of any type of slope roof plates made of polystyrene. The machining process is performed by means of hot wires mounted on two independently moving arms. Intuitive operation of the machine is ensured by the proprietary MegaRoofer software, which allows for simple preparation of machining projects. All you need to do is enter a few necessary parameters and the programme will automatically generate a ready-to-cut project. The MEGAPLOT OF1515 hot wire cutting machine is offered with a wide range of equipment, including a barcode scanner and rotary table. Technical specifications of the MEGAPLOT OF1515 Roof Master polystyrene cutting machine - work area (L x W x ...
The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...
The laser BYSTRONIC BYVENTION 3015 was manufactured in 2009 in Switzerland. The laser cutter is equipped with two cutting heads: 5 and 7.5 inches. Technical parameters : - laser source power: 2200 W - punching machine hours: 17487 h - 2 cutting heads: 5 and 7.5 inches - maximum size of the processed sheet: 3000 x 1500 mm - maximum cutting thickness, black steel: 8 mm - maximum cutting thickness, stainless steel: 6 mm - maximum cutting thickness, aluminum: 4 mm
Key data: 500 , 350 , 300
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.
maximum number of results exceeded
please refine your search
