customer used for sale

Several used robots Brand: KUKA Type: KR 150L150SP/2 Year of construction: 2000 Hours of operation: approx. 700 Nominal / load capacity: 150 kg Additional load at rated load: 80 kg Maximum total load: 230 kg Arm length: 1200 mm Max range: 2610 mm Repeatability: +/-0.2 mm Engine power: 19.8 kW Working volume: 51 m³ Weight: 1135 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The pictured robot  ...

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Several used robots Brand: KUKA Type: KR 200L 120/2 Year of construction: 2000 Hours of operation: approx. 800 Nominal / load capacity: 120 kg Additional load at rated load: 80 kg Maximum total load: 200 kg Arm length: 1400 mm Max range: 2810 mm Repeatability: +/-0.3 mm Engine power: 19.8 kW Working volume: approx. 65 m ³ Weight: 1140 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The picture ...

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 30 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Procedure: open Open filter surface: approx. 7.5 m square Presses contents: approx. 90 dm m³ PCB package length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Safety equipment: optional Optional accessories: optional possible depending on design Extensions: In consultation according to the design Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delive ...

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 26 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 9.7 m m² Presses contents: approx. 130 dm3 PCB package length: 1500 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Dimensions: Lxwxh Empty weight: Accessories: depending on the type and customer Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delivery. On these systems, we guarantee between 6 to 12 months. Condition: The plant is located in a very good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility ...

All prices are from Station Germany. All follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are owner, manufacturer or operator information and therefore non-binding for us. Customer protection is agreed between the parties. Place of jurisdiction Germany. All agreements are made in accordance with German law. Customer protection agreed after ICC Paris Intermediate sale, other use, exploitation and error are expressly reserved.

All prices are from Station Germany. All follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are owner, manufacturer or operator information and therefore non-binding for us. Customer protection is agreed between the parties. Place of jurisdiction Germany. All agreements are made in accordance with German law. Customer protection agreed after ICC Paris Intermediate sale, other use, exploitation and error are expressly reserved.

Control cabinet for roller conveyor used from stock All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...

This electrically driven sinusoidal table has an incremental angle measuring device (Heidenhain RON 705). -Sinusoidal table for workpiece clamping -Swivel range 0 - 110° -Clamping surface 800 x 600 mm -Groove width 22 mm -Groove spacing 100 mm -Number of grooves:6 pieces -Dimensions: Length: 840 mm Width: 760 mm Height: 220 mm Clamping angle, clamping angle, clamping tower, clamping device, About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm The displacement measurement is carried out via a rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overha ...

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping area: 1400 mm x 1400 mm Total height: 319 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 140 H6 mm Condition: Very good (used) Optional with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Manufacturer: SHW Machine Tools Type: UF 21 Routes X,Y, Z: 1000, 600, 625mm Control: Heidenhain TNC 155 Table: Folding table 1000 x 630 mm Automatic swivel head Pinole 120mm Milling spindle holder SK 40 Speed 2500rpm Overhaul 2016 Partial overhaul 2022 About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

CNC Double Column Vertical Lathe GORBREX model TKV525( built on the corp of SEDIN Lathe )Manufacturer: GORBREX – PolandModel: TKV525 Machine is new and build on Customer requestCondition : very good, under powerControl: SIEMENS or other - on Customer request Delivery time: 6 - 12 monthsMachine with warranty!Technical details :Table diameter: 2250 mmDistance between table and ram 0 - 1780 mmDistance between table and lower surface of transversal beam 400 - 2140 mmWorkpiece :Max workpiece diameter 2500 mmPictures are of one which was made for our German Customner and delivered to him last autumn.

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

ULMA Super Chik, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out tray. • Gravity and motorized exit conveyors: in line, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centering device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethylene and poly ...

Bakery shop fittings Aichinger ArtLine III sales counter 3.9 m shop counter bakery sales stand CoolMaxx HotMaxx CoolBottle, used from 11/2018 Type: ArtLine III Manufacturer: AICHINGER GmbH, Ostring 2, 90530 Wendelstein, Germany Purchase according to invoice: 11/2018 Properly and professionally dismantled and stored on pallets in our warehouse. Very good condition. Disc type: ARTLine OK 1252mm I ZP 330mm Countertop Type: Postforming APL Depth: 1060 Front Type: Decor APL Decor Edge: A1 MGM_Schwarz APL Postforming: G/A1 MGM_Schwarz Display: table-level Price bar: EV 1 Front décor top: E/H3395 ST12_Corbridge natural oak Front edge top: H3395 ST12_Corbridge natural oak Version: Standard (V20) Front profile: EV 1 Skirting board: EV 1 Pocket tray type: 1-tube/Waab CNS The shop fittings consist of: #Theke Free-standing end side for modules with glass attachment, ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

Travel • X-axis (bed): 16,000 mm • Y-axis (vertical): 2,100 mm o Option Y = 3,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Siemens Sinumerik 840 C o Option control conversion Heidenhain iTNC 530 o Option control conversion Heidenhain TNC 640 o Option control conversion Siemens Sinumerik 840 SL Feed rate • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction: 1998 • 2013 – Headstock overhaul • 2017 – Overhaul of milling head • 2022 – Partial overhaul Clip • T-slots: 28 H7 • T-slot spacing: 250 mm, • Clamping area: 8,500 mm x 1,500 mm Chip conveyors (2 pieces) � ...

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

We offer an extraction system from NESTRO Lufttechnik GmbH. The machine is from 1996, but is currently no longer used. Due to the age-appropriate condition, we recommend a prior inspection of the facility. The system is offered - due to a new purchase from our customer. Particulars: - Manufacturer: NESTRO Lufttechnik GmbH, Hainkirchen - Model: SFN 24C - Year of construction: 1996 - Machine No.:343676/002-98 - Filter area: 240m3 The machine is still in our customer's factory near Leipzig. The sale takes place ex works EXW (loading possibility available). We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarant ...

Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are to be understood as gross prices in EURO ex works. The offers are s ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

GeneralCNC Turning Centre with C axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle15/22/22 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.-5000 rpmBar diameter max.65 mmSwing- Ø, max.755 mmMax. Turning Length510 mmWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (spindle 1) 22/ 15 kW, 5,000 min-1The NLX 2000 adopts a highly reliable main spindle de ...

Manufacturer: SHW Type: UFZ 4L Control: Siemens 880 Year of construction: 1994 Tool holder: SK 50 Track X, Y, Z: 8000, 1000, 1600 (vertical) mm Tool changer 120-fold Table: Top panel 9000 x 1500 mm Internal coolant supply Condition: very good About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Manufacturer: SHW Type: UF6 Rigid Tower Year of construction: 1980 Tool holder: SK 50 Travel X, Y, Z: 3000, 1500(1200), 1600 mm Table: 3000x1200 mm Condition: untested (used) Speed: 1800 1/min Feeds: 1 – 8000 mm / min Rapid traverses: 8 m / min Drive power: 32KW Other: -Safety clamping bolts This machine is not ready for operation, it is ideal for control conversion. The mechanical condition is very good. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Manufacturer: SHW Machine Tools Type: UF 21 / UF 31 Routes X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare pa ...

Manufacturer: SHW Machine Tools Type: UF 41 Routes X,Y, Z: 1000, 700,750mm Control: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Oaith Performances: - Used machines - Spare parts - Customer service - Machine service -  ...

Universal Vertical Milling Head This milling head was used on a Union TC130 table boring machine and can be adapted to many other machines. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

NC Rotary Table Manufacturer: Eimeldingen Table size: 1100 x 840mm Infinitely divisible Condition: As good as new About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Tip height: 180 mm Diameter: 240 mm Space requirement: approx. 1550 x 400 x 350 mm Motor: GOULD Permanent Magnet Servomotor Type: M23Y-Y60Y-900N-TH Encoder ROD 426 – 2000 Condition: very good (used) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...

Used joinery machine on behalf of a customer Manufacturer: Mafell Type ABA joinery line 12m Parcel With pictured additions. Mafell Machines -Drill with frame -Hand-held circular saw -Chainsaw -Trolley At the moment, the machine can still be viewed under electricity. N0ya3cbp3b ATTENTION Location: Leipzig Sale from foundation.! Dismantling must be carried out by the customer. Forklift can be provided. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this ...

FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER

WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.

Key data: 75 , 12 , 12

We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hours: - electric 37756 / Compr. 20546 - Permissible operating pressure: 12 bar - Operating temperature: 75-85°C Engine - Nominal power: 75 kW - Engine speed: 1500 1/min - Degree of protection: IP ...

SHW UF 5 Travel • X-axis (rotary table): 1,500 mm • Y-axis (headstock vertical): 1,300 mm • Z-axis (headstock horizontal): 750 mm Control • CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head (Switching between horizontal and vertical machining) Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Year of construction 1994 • Refurbished in 2016 Stepless NC rotary table • Backle PKTF 55 • Clamping surface: 1500 x 1250 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine ov ...

We offer Lathe VDF with three-jaw chuck bed >100cm W:approx. 350cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). Please only bid if you accept the terms and conditions of sale We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also  ...

WE OFFER AN NICE CONDITION LVD , WE CAN MAKE FOR CUSTOMER AS WELL START UP OF MACHINE INCLUDING TRAINING CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL

Schaudt & Studer Grinding Machines - Premium Overhauled [RETROFIT] - various conventional, cycle-controlled & CNC grinding machines - for various workpiece Ø - with grinding lengths from 200 to 3,000 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: according to customer requirements - The attractive alternative to the new machine - We are also happy to overhaul your machine, more information on our homepage Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Second / Third External Loop Unit - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request

SHW Uniforce 5 Travel • X-axis (bed): 5,000 mm • Z-axis (vertical): 1,000 mm • Y-axis (headstock): 1,300 mm Control • CNC control: Siemens SINUMERIK 840D Universal milling head in orthogonal design • Swivel range milling head holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: HSK 100 • Speed range: 22 – 4,000 1/min Year of construction 1998 • 2022 – partial overhaul o Inspection of all components -> replacement if necessary o General overhaul milling head o Geometric acceptance takes place after New machine acceptance protocol Clip •Mounting table: Conveyor • Task length: Coolant device • Paper belt filter system • Container capacity: 800 l Automatic tool changer •Tool magazine with 90 magazine slots Reversible clamping device Rückle PKTW 2 About us: MBM Maschinenservice & G ...

PLASMA PLOTTER MODEL MTX 2000/6000 Construction: steel+aluminium Working field: 6200/2200/1400 XY axis drive double-sided gate drive: 4Nm stepper motors with ratios, gear strips accuracy class 8 Z-axis drive: ball screw stepper motor double aluminum beam with a special cross-section ensures rigidity, service life Travel speed: up to 25m/min Z-axis control system: THC My plasm system Linear guides: TBI, Automatic material detection system Power supply: 240V Permissible load: 3000kg Total weight: 2500kg USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC Cutting Height Control System Rope guides TBI Double-sided gate drive: X-axis stepper motor and gear strips accuracy class 8 Y-axis stepper motor and gear strips accuracy class 8 Z-axis stepper motor and ball screw Drives implemented with TBI 20 ra ...

Complete compact vertical packaging system including auger dosing unit, screw conveyor and outfeed conveyor. Suitable for powdery products with a high or a low fluidity. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing ? vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 5000ml | film width: max. 620mm | bag size (mm): min.-max. L(80-400)xW(180-300) | max ...

Complete compact vertical packaging system including auger dosing unit, screw conveyor and outfeed conveyor. Suitable for powdery products with a high or a low fluidity. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing ? vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: 150-1200ml | film width: max. 420mm | bag size (mm): min.-max. L(60-300)xW(60-200) | max. s ...

Complete compact vertical packaging system including volumetric dosing unit, 1 cup, single bucket conveyor and outfeed conveyor. Suitable for granulate-type products such as sugar, rice, beans, nuts, etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: 150-1200ml | film width: max. 420mm | bag size (mm): min.-max. L(60-300)xW(60-200) | max. speed of the machine in neutral: 50 cycles/min  ...

Complete compact vertical packaging system including 10-head multihead weighing unit (1.3 l/head), z conveyor, platform, outfeed conveyor and rotary table for finished products. Suitable for packing of bulk materials with irregular shape such as potato chips, cornflakes, biscuits, peanuts, sweets, shrimps, industrial parts in general such as screws, nails, metal parts or plastic components etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing ? vacuum is not generated), supporting device of finished bags, euro hole punching devi ...