british flag
Resale Logo

cup used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used and new packaging machinery  1&1 Pulspack e. K.  http://www.pulspack.com 
banner logo
start page > keywords cup > results
435 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125436729 106

TOMA LEN 63C for sale
Eccentric Presses


Eccentric press TOM LEN 63 C was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming ...
used machine
 
Eccentric press TOM LEN 63 C was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser.

Technical parameters of the LEN 63 C press:
- pressure force: 63 tons
- table surface: 800 x 630 mm
- slider surface: 450 x 280 mm
- overhang: 315 mm
- number of jumps in the machine: 65/130 min.
- number of jumps, manual work: 45/50 min.
- slider stroke adjustment: 10-105 mm
- slider adjustment: 70 mm
- table-slider clearance: 335 mm
- clearance between columns: 355 mm
- number of gears: 2
- engine speed: 730/1440 min.
- engine power: 4 / 7.5 kW
- dimensions of the press: 1425 x 1790 x 2550 mm
- machine weight: 5850 kg

The advantages of the TOMA LEN 63 C press:
- cast bodies: gray cast iron
- possibility to adjust the stroke size of the slider
- the ability to adjust the slider
- pneumatic balancing of the slider
- accurate, extended, self-lubricating slide guidance
- rolling adaptation of the eccentric shaft of the connecting rod
- clutch friction lining: brake, meeting the requirements of occupational hygiene regulations
2012
32,500 €  
  PL   request
125460489 1900

Hand Tools


Weight approx.: 50 kgDimensions (l x w x h) approx.: 800 x 600 x 300 mmDescription: 2 electric screwdrivers BOSCH 0601430008 with square, 1 hand drill, 1 angle grinder with cup wire brush disc, for further details see ph ...

 
Weight approx.: 50 kg
Dimensions (l x w x h) approx.: 800 x 600 x 300 mm
Description: 2 electric screwdrivers BOSCH 0601430008 with square, 1 hand drill, 1 angle grinder with cup wire brush disc, for further details see photos
 
used machinery auction RESALE 65 €  
  DE   request
125421722 703

MEYN FRYER BR5000/400 for sale
Cooking cupboards


1 x Meyn fryer. Type - BR5000/400. 400mm wide belt. Frying length - 5000mm. Comes with hold down belt, hydraulic lifting for belts and cover, MC control, thermo-oil heated, oil tank and fire-fighting equipment. Located i ...

 
1 x Meyn fryer. Type - BR5000/400. 400mm wide belt. Frying length - 5000mm. Comes with hold down belt, hydraulic lifting for belts and cover, MC control, thermo-oil heated, oil tank and fire-fighting equipment. Located in Germany.
 
Price  
  DE   request
125460508 205

FORMAT 4 profit H350 16.50 for sale
5-Axis Machining Centre


Weight approx.: 9000 kgDimensions (l x w x h) approx.: 8590 x 4060 x 2600 mmsoftware: Woodflash working length x-axis: 5000 mmworking width y-axis: 1500 mmworking height y-axis: 150 mmmain spindle: 12 kWtool changer: 18- ...
used machine
 
Weight approx.: 9000 kg
Dimensions (l x w x h) approx.: 8590 x 4060 x 2600 mm
software: Woodflash
working length x-axis: 5000 mm
working width y-axis: 1500 mm
working height y-axis: 150 mm
main spindle: 12 kW
tool changer: 18-fach / 18-fold + 10-fach / 10-fold
vacuum pump: 90/108 cbm/h
drilling head vertical x-axis: 7 piece
drilling head vertical y-axis: 5 piece
drilling head horizontal x-axis: 4 piece
drilling head horizontal y-axis: 2 piece
saw unit: ja / yes in X
changing unit: ja / yes
edge gluing unit: nein / no
travelling way X-axis: 6000 mm
travelling way Y-axis: 1970 mm
travelling way Z-axis: 455 mm
Description: A young gantry-style CNC machining center with double-sided digital driving portal.

5-axis gimbal electric spindle 12 kW (S6) HSK F63, 24,000 rpm
Automatic central lubrication

Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in Y-direction.
Horizontal 6 spindles:
4 spindles in the X direction and 2 spindles in Y-direction.
Forward stroke = 70 mm, max. Drill length = 70 mm and shank D = 10 mm.
All spindles are individually driven and available.
1 grooving saw - in X- Direction:
Max. Saw blade diameter 120 mm, max. Blade thickness 5 mm, max. number of revolutions infinitely variable up to 7500 rpm.

8 workpiece supports:
with front and rear stop row. Vacuum dual-circuit system with Suction cup height 100 mm.

Positioning display of the workpiece supports and vacuum cups in the CNC board.
The exact position of the vacuum cups on the workpiece supports is indicated by laser.

Hand-held terminal for controlling the axle speed incl. Emergency stop switch

Safety system with photocell on the front

18-fold plate changer traveling in X:
Max. Tool diameter 250 mm
Max. Tool length 280 mm

automatic tool length measuring system
2017
used machinery auction RESALE 27,500 €  
  CH   request
125374666 707

Komplette Kücheneinrichtung


â?¢ 1 St crockery Cabinet, length: approx. 1.20 m, height: approx. 0.50 m, depth: approx. 0.70 m â?¢ 3 PCs cupboards â?¢ 3 PCs drawers cabinets, with a total of 8 drawers â?¢ ...

 
â?¢ 1 St crockery Cabinet, length: approx. 1.20 m, height: approx. 0.50 m, depth: approx. 0.70 m
â?¢ 3 PCs cupboards
â?¢ 3 PCs drawers cabinets, with a total of 8 drawers
â?¢ 2 PCs refrigerators
â?¢ 1 PC sink
â?¢ 1 double sink
â?¢ 2 St cupboard with sliding doors
â?¢ 1 St Base cabinet (sink)
â?¢ 2 PCs drawers cabinets, with a total of 5 drawers
â?¢ 1 St cloakroom basin with Unterspüle
â?¢ 1 St. flushing storage / servers Panel
â?¢ 1 St four plate stove, manufacturer: MKN D38300, type: 2123402-00
â?¢ 3 St. dishes stand racks
â?¢ 1 St hood, length: approx. 2.20 m, width: 1.80 m
â?¢ 1 St hood, length: approx. 1.30 m, width: approx. 1.30 m
â?¢ 1 PC washer, manufacturer: Hobart, length: approx. 3.50 m, width: 2.50 m
â?¢ 1 PC cooling machine
 
9,500 €  
    request
125460583 104

KNUTH CT-301 for sale
Tool Grinder


Weight approx.: 40 kgDimensions (l x w x h) approx.: 660 x 400 x 400 mmDescription: Equipped with cup wheels, diameter approx. 160 mm, support table swivelling, dimensions 300 x 170 mm, see photos for details
used machine
 
Weight approx.: 40 kg
Dimensions (l x w x h) approx.: 660 x 400 x 400 mm
Description: Equipped with cup wheels, diameter approx. 160 mm, support table swivelling, dimensions 300 x 170 mm, see photos for details
1996
used machinery auction RESALE 85 €  
  DE   request
125374592 709

HAMBA Hamba Becher-Füller 2400 for sale


The fully automatic HAMBA Cup filler is universally suitable. This machine can many paste-like products such as cream cheese, jam, meat salad, ect. and liquid filling in round, square or rectangular plastic or Hartpappie ...

 
The fully automatic HAMBA Cup filler is universally suitable. This machine can many paste-like products such as cream cheese, jam, meat salad, ect. and liquid filling in round, square or rectangular plastic or Hartpappier Cup.

The fully automatic capping can either be sealed with lids or plastic films with subsequent clip-on lid. Loss of prepackages, currently an outfeed conveyor is installed, the default provided turntable still exists.

The performance is up to 40 packs per minute depending on the product and is infinitely variable.

The filling is infinitely variable from approx. 100-550 cm ³ adjustable.

The drive turns in closed, oil-filled enclosures are maintenance-free.

There are three sets of Cup format. Machine is equipped with safety doors.

If you are interested we will send like further pictures or even video footage.
 
70,000 €  
    request
125456995 702

DERBY Teigteilmaschine ab 7-reihig Derby for sale
divider-rounder, fabr. Winkler, Derby 8 rows


model 401, double excenter\r\ncap. max 10.000 pcs./h\r\ndistance between the cups 110 mm, width 900 mm\r\n

 
model 401, double excenter\r\ncap. max 10.000 pcs./h\r\ndistance between the cups 110 mm, width 900 mm\r\n
 
Price  
    request
125372399 407  

NEWPACK/TMCI FM-200 M for sale
Formseal machines


1 used Form - Filling and Sealing machine Make: Newpack (TMCI Group / Italy) Type: FM-200-M Year: 1991 Serial number: 1290118 Hours of operation: 1991 - 2003 10,000 h ...
used machine
 
1 used Form - Filling and Sealing machine

Make: Newpack (TMCI Group / Italy)
Type: FM-200-M
Year: 1991
Serial number: 1290118
Hours of operation: 1991 - 2003 10,000 h,
2003-2010 =
2010-2015 = 9,300 h

It was followed by a complete overhaul in 2003 and 2010.
While overhaule was installed also a new "PICK & PLACE" pack system overhaul in 2010.

Currently Product: marmalade, jams, honey.
With low adaptation: Any pumpable product z.B coating chocolate, margarine etc
Mould size: 20gr, 25gr
Format size: 50mm outside diameter, maximum depth 25 mm
capacity: 64.800 portions per hour
Cycle rate: 2.2 seconds - 27 cycles/min
Cup foil: PP, PE, PS
Lid foil: Aluminium

The plant is dismantled in the camp of the former operator.

Price is negotiable after visit.

1991
Price  
    request
125401373 212

IKS VLM-VB 80/10-500 for sale
Manipulator


Weight approx.: 800 kgDimensions (l x w x h) approx.: 5000 x 4000 x 1900 mmDescription: Max load 120 kg, with 6 suction cups and IKS KZ1-1000 slewing crane, max load 1000 kg, arm length approx 5000 mm, uprigjt height 400 ...
used machine
 
Weight approx.: 800 kg
Dimensions (l x w x h) approx.: 5000 x 4000 x 1900 mm
Description: Max load 120 kg, with 6 suction cups and IKS KZ1-1000 slewing crane, max load 1000 kg, arm length approx 5000 mm, uprigjt height 4000 mm
SHIPPING DIMENSIONS 5000 x 1400 x 1000 mm 3 PARCELS
2009
used machinery auction RESALE 800 €  
  IT   request
125355428 107

TRUMPF TruMatic 3000 fiber (K04) for sale
CNC Laser Cutting Machines


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser ...
used machine
 
OVERVIEW:
Brand: Trumpf
Model: TruMatic 3000 fiber (K04)
Application type: Laser Cutting
Machine type: Laser Punch Combination Machine
Availability: September
Construction year: 2011
Production hours: 34000
Laser hours: 33000
Location: Spain

MAIN DRIVE:
Laser power: 3000 kW
Punching force: 165 kN

CONTROL UNIT:
Brand: Siemens

MOVEMENT:
X-AXIS:
Movement: 2500 mm
Y-AXIS:
Movement: 1250 mm

WORKPIECE:
Workpiece weight: 120 kg

MAX MATERIAL THICKNESS:
Steel: 4 mm

ADDITIONAL EQUIPMENT:
1 - MultiTool function
2 - MultiBend function
3 - Thread shaped function
4 - Fast marking / grooving function
5 - Function roller technology and deburring
6 - Additional clamping claw
7 - Repositioning cylinder with moving parts in height
8 - Small parts sensor for ramp evacuation
9 - Mounting on mattress
10 - Chip conveyor with folding tank
11 - Deformed sheet metal detection
12 - Teleservice via and modem
13 - SheetMaster (2500 x 1250)
14 - Off / Load parallel to the main time
15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250)
16 - Suction cup frame
17 - Disp. Load control
18 - GripMaster (2500 x 1250)
19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm)
20 - Double trolley load incl. connection with warehouse
21 - 18 RTC cassettes incl. Matrix plate
22 - QuickSet
23 - Conveyor belt parts
24 - TruTops Punch License
25 - Includes € 40,000 in tooling
2011
Price  
  ES   request
125401557 1900

SCHMALZ JUMBO ERGO for sale
Manipulator


Weight approx.: 80 kgDimensions (l x w x h) approx.: 1300 x 1000 x 600 mmDescription: Max load 110 kg, with 4 suction cups, without support arm SHIPPING DIMENSIONS 1450 X 900 X 1000 mm 1 PARCEL

 
Weight approx.: 80 kg
Dimensions (l x w x h) approx.: 1300 x 1000 x 600 mm
Description: Max load 110 kg, with 4 suction cups, without support arm
SHIPPING DIMENSIONS 1450 X 900 X 1000 mm 1 PARCEL
 
used machinery auction RESALE 200 €  
  IT   request
125284701 205

BIESSE ROVER C6.65R for sale
Numerically Controlled Machining Centres


Machining centre Biesse Modello Rover C6.65 R Software BIESSE WORKS Working field X mm 6200 Working field Y mm 1535 Working field Z mm 250 Work table with automatic adjustment of bars supports and sucker holder c ...
used machine
 
Machining centre Biesse Modello Rover C6.65 R
Software BIESSE WORKS

Working field X mm 6200
Working field Y mm 1535
Working field Z mm 250
Work table with automatic adjustment of bars supports and sucker holder carriages
08 working areas
10 bar supports with 4 sucker holder carriages
40 Uniclamp sucker holder carriages
Suction cups included:
06 of mm 140x75
20 of mm 140x140
10 of mm 140x55
18 Fittings blocks
01 Electro-spindle at 4 axels of 12 kW
01 boring head 22 spindles composed by 13 vertical spindle + horizontal spindle + 1 blade
03 Multi-function heads composed by:
01 Saw blade unit diameter mm 300
01 Boring unit at 6 counterposed bits
01 Milling unit at 2 exits
Automatic chain Tool change at 22 positions installed on the machine

Depression plant with vacuum pump of 250 m3/h
Automatic centralized lubrication
Shaving evacuation belt
2007
Price  
  IT   request
125386444 206

LIGMATECH MPC400 / MDE150 for sale
Carcase Assembling Line


Weight approx.: 25000 kgDimensions (l x w x h) approx.: 35000 x 3500 x 3500 mmDescription: LIGMATECH MPC400 / MDE150 Carcase Assebling Line consisting of: - conveyor belt type ZTG 100/28/08 - 2800 x 800 mm - turning Stat ...
used machine
 
Weight approx.: 25000 kg
Dimensions (l x w x h) approx.: 35000 x 3500 x 3500 mm
Description: LIGMATECH MPC400 / MDE150 Carcase Assebling Line consisting of: - conveyor belt type ZTG 100/28/08 - 2800 x 800 mm
- turning Station typ MTD 100/23/08 - 2300 x 800 mm
- automatic glueing Station type MLK 100/21/08 with 5 nozzles and automatic glue supply.
- roller conveyor with pneumatic Lifting function type ZTR 100/25/08
- turning Station with vacuum unit type MHG 100
- assembly press LIGMATECH MPC 400, for pre-mounting of the individual parts, with belt feed, various vacuum suction cups and aligners for inner bottoms
- carcase press LIGMATECH MDE 150, with nailing robot
- turning Station vertical/horizontal type MTA 200/23/13/08
- 2 Pcs. conveyor belts type MTB 100/38/08 - 3800 x 800 mm
- conveyor belt type MTB 100/08/08 - 800 x 800 mm
- turning Station type MTD 100/23/08
2007
Price  
  ES   request
125204803 703

WOLFKING CAP 1, type number: 57670 for sale
Microcutter


Wolfking cup microcutter, type: CAP 1, type number: 57670, year of construction: 1995, 3 x 380 V, 50 Hz, 178 kW, 330 A, diameter outfeed: 550 mm, dimensions: 2900 mm x 2000 mm x 2000 mm, including switch cabinet, type: f ...
used machine
 
Wolfking cup microcutter, type: CAP 1, type number: 57670, year of construction: 1995, 3 x 380 V, 50 Hz, 178 kW, 330 A, diameter outfeed: 550 mm, dimensions: 2900 mm x 2000 mm x 2000 mm, including switch cabinet, type: frequency inverter, number: 5767, year of construction: 1995, 380 V, 50 Hz, 110 kW, 308 A, dimensions: 800 mm x 600 mm x 2250 mm, including box with spare parts.
1995
used machinery auction RESALE 5,000 €  
  BE   request
125374378 1108

GARMAT for sale
Garmat Spray booth


Spray booth Brand: Garmat Triple door, opening of + - 270 cm Year: 1994 Voltage: 380 V, three-phase Dimensions: + - 400 cm x 705 cm x 360 cm Attached paint laboratory In the room, 1 mechanical shelf, 1 metal t ...
used machine
 


Spray booth

Brand: Garmat

Triple door, opening of + - 270 cm

Year: 1994

Voltage: 380 V, three-phase

Dimensions: + - 400 cm x 705 cm x 360 cm



Attached paint laboratory

In the room, 1 mechanical shelf, 1 metal table, 1 metal cupboard

Cage and suction hood for small painting jobs

Dimensions: + - 240 cm x 240 cm x 360 cm


1994
used machinery auction RESALE 500 €  
  BE   request
125164641 401

LIEDER TA51V for sale
Cup Filling Machine


For pasty foodstuffs like quark and soft cheese.
used machine
 
For pasty foodstuffs like quark and soft cheese.
1974
Price  
  DE   request
125372943 2100

Gyproc, interior doors, domes, floors, MEA parts,


Gyproc, interior doors, domes, floors, MEA parts, ... 10 interior doors Used cupolas of different sizes Floor: 50 copies of 125 cm MEA grid and 3 pieces ...

 


Gyproc, interior doors, domes, floors, MEA parts, ...



10 interior doors

Used cupolas of different sizes

Floor: 50 copies of 125 cm

MEA grid and 3 pieces



...



 
used machinery auction RESALE 20 €  
  BE   request
125164556 1300  

SISTEM TEKNIK ABHF-2500-805-0316 for sale
ALUMINIUM BILLET FURNACE


Qty. 1 Second-hand Aluminium Log Furnace Mfc.: Sistem Teknik Type: ABHF-2500-805-0316 Built: 2004 Log dimensions: dia. 178 x 12600 mm length Capacity: 2.5 t/h Max. temperature: 550 °C Installed power: 1.171.000 kC ...
used machine
 
Qty. 1 Second-hand Aluminium Log Furnace
Mfc.: Sistem Teknik Type: ABHF-2500-805-0316 Built: 2004
Log dimensions: dia. 178 x 12600 mm length Capacity: 2.5 t/h
Max. temperature: 550 °C Installed power: 1.171.000 kCal/h + 30 kW
Hot shear Mfc.: Assimakis S.A. Type: 2LEVFLY Max. force: 215 MT
Scope of supply: Log feeding system Recuperator
Log furnace Log hot shear
2004
Price  
  DE   request
125372709 1402

Mobile work table


Mobile work table Green steel frame Melamine cups Dimensions: 122 cm x 2400 cm x 79 cm Steel roll holder, welded to the table Support dimension: 63 cm x 112 cm Not part of this lot: lots 102/103/104

 


Mobile work table

Green steel frame

Melamine cups

Dimensions: 122 cm x 2400 cm x 79 cm

Steel roll holder, welded to the table

Support dimension: 63 cm x 112 cm



Not part of this lot: lots 102/103/104


 
used machinery auction RESALE 20 €  
  BE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Multideck ovens Real Forni Rotoreal SP Medio


Descriere Marca Real Forni Model SP Medio R ID 7170a Status Activ Pret 7.200 € + TVA An fabricatie 2014 Putere 3 KW Ore de functionare 700 ore Locatie Nova Gorica (SI) Cuptor rotativ patiserie Real Forni Rotoreal, SP Medio R din 2014 pe gaz cu rotor de 3 Kw (Alimentare: 400V, 50Hz). Cat. II2 E3 B/P, gaz (mbar) G20=20, G30/31=30. Arz?tor Riello (putere caloric? 62 000 Kcal/h), greutate aprox. 1500 kg. C?rucior pentru 25 de t?vi (60 x 80) inclus. Panou de control electronic cu 100 de programe ?i 5 viteze de coacere. 2 buc??i disponibile. ExWorks. Pre?ul este negociabil ?i nu include TVA. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Vizionarea produsului se programeaza cu 24 de ore inainte. We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

CNC Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Numerically Controlled Machining Centres BIESSE ROVER C6.65R


Machining centre Biesse Modello Rover C6.65 R Software BIESSE WORKS Working field X mm 6200 Working field Y mm 1535 Working field Z mm 250 Work table with automatic adjustment of bars supports and sucker holder carriages 08 working areas 10 bar supports with 4 sucker holder carriages 40 Uniclamp sucker holder carriages Suction cups included: 06 of mm 140x75 20 of mm 140x140 10 of mm 140x55 18 Fittings blocks 01 Electro-spindle at 4 axels of 12 kW 01 boring head 22 spindles composed by 13 vertical spindle + horizontal spindle + 1 blade 03 Multi-function heads composed by: 01 Saw blade unit diameter mm 300 01 Boring unit at 6 counterposed bits 01 Milling unit at 2 exits Automatic chain Tool change at 22 positions installed on the machine Depression plant with vacuum pump of 250 m3/h Automatic centralized lubrication Shaving evacuation belt

Cup Filling Machine LIEDER TA51V


For pasty foodstuffs like quark and soft cheese.

ALUMINIUM BILLET FURNACE SISTEM TEKNIK ABHF-2500-805-0316


Qty. 1 Second-hand Aluminium Log Furnace Mfc.: Sistem Teknik Type: ABHF-2500-805-0316 Built: 2004 Log dimensions: dia. 178 x 12600 mm length Capacity: 2.5 t/h Max. temperature: 550 °C Installed power: 1.171.000 kCal/h + 30 kW Hot shear Mfc.: Assimakis S.A. Type: 2LEVFLY Max. force: 215 MT Scope of supply: Log feeding system Recuperator Log furnace Log hot shear

Cup filling machines and sealing machines Ampack GmbH KF 2 / 4 S


We have for sale a little used fully automatic Ampack KF 2 / 4 S cup filling and sealing machine for yoghurt. etc. The machine is a carrousel style and suitable for cups and small bottles. With the Ampack Rotary Valve Dosing Station all products of ...

Deep drawing packaging machines Finnah 2.600.004


Used Finnah 2.600.004 thermoform packaging machine Approx. 24.800 hours after general overhauling and modernization in year 2007. The cup shape is 72mm x 72mm The filling range is from 100 to 250ml. Fruit pieces can be up to 10mm size The machi ...

Filling equipment ELOPAK PS-50


Complete filling line filler year 1995, feeder for cap 2007, Grasso sealing tunnel 2008 printer company Video-Jet Capacities of packaging - possibility of pouring 1 l, 0.25 l Type of cup - ELOCAP Line performance - 65-80 / packages per minute

Vertical meter packing machine IPS


* 4 cups meter * 2 shapers for band 280/290 mm

Filling equipment GINOR


Vertical Volumetric filler, conveyor and hopper with level; -2 formats ("2 cups) 50 and 250 gr; -Can do 100 gr 1 also collar format; -100 gr format Speed = 60 PCs/min; -Output conveyor inclined; Can work with transparent film (timed) or printed; ...

Carousel Turning Machines (Lathes) SEDIN 1A 512 MF3


Used well-maintained SEDIN 1A 512 MF3 CNC lathe Complete retrofitted engines with new Sinumeric 840D CNC control New Siemens servo motors New electric cupboard Heidenhain measuring sticks Everything electrical is replaced with Siemens The machine is com ...

Filling line for glass KHS Line


Product: carbonated drinks Bottles: glass, 0.25 l - 1 l. Capacity 15000 bph Transportation of bottles GTR, KHS, 1998 Bottle washing machine EC 24/105 S11K 01, KHS, 1998 The machine for bottling Combi REV-H2 40/10 KK, KHS, 1998 cups Loading Device  ...

Cup packaging machines Effe Packaging tm-xm


Effe pakaging machine Tray sealing machine Semi-automatic In very good working conditon

Cup printing machines OMSO PRIMAC 155/6 UV


6 colours 130 mm

Cup packaging machines Futura IRB


Automatic Packer machines for boxes with or without cover.

Waste presses Bartontech


EPS Compactor C50 Press polystyrene EPS-C50 compacts EPS waste at a ratio of 40: 1. Ironing polystyrene by using offered compactors EPS reduces the cost and the space occupied by the EPS waste. EPS presses are very easy to use and safe, can be operated b ...

Cup filling machines Illig FillingMachine Illig FS37 +DK300


FORM FILL AND SEAL MACHINE IDEAL FOR YOGURT 100X80MM TWO SIZES 500G 19 CUPS PER MIN 250 G 24 CUPS PER MIN PLC SIEMENS WITH PASTEURISER AND CIP

Cup filling machines and sealing machines Trepko 212KS


Cup fill and seal machine Trepko model 212KS, year 2007 Working hours (January 2017): 2.255h Capacity: 3500 – 4500 items per hour Control system Siemens S7 Max Temp 70C Machine is adjust to work with kefir, yogurt, melted cheese. Cup diame ...

Final packaging machines SIATE SIATE


SIATE Sealing Machine For Cups , Cup Dispenser , Brine Dosers , Gas Flush , Heat Seal With Plastic Film , Plastic Cap Dispenser , Volume of Cup 200gr , MODEL:SLA ,Y.O.M 2008 , S/N 523 ,Brine Tank ,Vacuum Pump ,Conveyor With Divider previously used for FET ...

Mug filling and closing machines UNIPAK PKG 1A


Rotary dairy products packing machine. Capacity 2500 cups per hour After general repair prics 10000EUR --- We offer new and used machines. With any further questions, please do not hesitate to contact us.

Vacuum deep drawing machines BP Machinery BPTF110


Thermoforming machine for small cups of olive oil, ham, honey etc. Themachine make the full process with thermoforming, filling , sealing and cutting. PLC and Touchscreen, dosing with servomotor. Electric photocell for spot. Top brands in electronic c ...

Offset Cup printing machine OMSO DM 45- AC


6 colour offset cup printing machine: Printing on a round cups Printing height: 50 - 110 mm Max. printing angle: 10° Dry type: UV Output: 15.000 pcs/h --- We offer new and used machines. With any further questions, please do not hesitate to conta ...

Shrinking units Blink Extreme 300MT


Make Graham / Blink Model Shrink Sleeve Line Year 2005 / 2014 Delivery Date Immediately Max Cup Infeed TBC Sleeving Unit Blink Extreme 300 MT (2014) Equipment - Mould & Matic Autofeeder - Van Dam Screw Feeder - Graham Unreeling Unit - PUK Con ...

Molding machines for cups Illig RDM 50K


Make Illig Model RDM 50K Year 1998 Delivery Date Immediately Forming Area 500 x 280 mm Max Negative Height 125 / 150 mm Max Positive Height 15 mm Max Material Width 525 mm Max Material Thickness 2 mm Min Material Thickness 0.4 mm Max Feed Length ...

Molding machines for cups Illig RDM 50K


Make Illig Model RDM 50K Year 1998 Delivery Date Immediately Forming Area 500 x 280 mm Max Negative Height 125 / 150 mm Max Positive Height 15 mm Max Material Width 525 mm Max Material Thickness 2 mm Min Material Thickness 0.4 mm Max Feed Length ...

Drill-Grinding Machines Mecof 25PR,380V radial


Auction name Tool manufacturer Cupedo & Zn at Berkel and Rodenrijs Public online auction. Start of auction: 16 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 October 2017 18:01 GMT +0200 (Western Europe (DST) The pric ...

Weisser Lathe DLZ 45501,380V


Auction name Tool manufacturer Cupedo & Zn at Berkel and Rodenrijs Public online auction. Start of auction: 16 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 October 2017 18:01 GMT +0200 (Western Europe (DST) The pric ...

Drill-Grinding Machines Tai Piin TPR-920/ 13570


Auction name Tool manufacturer Cupedo & Zn at Berkel and Rodenrijs Public online auction. Start of auction: 16 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 October 2017 18:01 GMT +0200 (Western Europe (DST) The pric ...

Milling Machines TOS FA 3B /332000141


Auction name Tool manufacturer Cupedo & Zn at Berkel and Rodenrijs Public online auction. Start of auction: 16 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 October 2017 18:01 GMT +0200 (Western Europe (DST) The pric ...

Hydraulic Unit Mobile test movable 380v


Auction name Tool manufacturer Cupedo & Zn at Berkel and Rodenrijs Public online auction. Start of auction: 16 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 October 2017 18:01 GMT +0200 (Western Europe (DST) The pric ...

Valve Hydraulic VCV-200


Auction name Tool manufacturer Cupedo & Zn at Berkel and Rodenrijs Public online auction. Start of auction: 16 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 October 2017 18:01 GMT +0200 (Western Europe (DST) The pric ...

Progres N425. 380V


Auction name Tool manufacturer Cupedo & Zn at Berkel and Rodenrijs Public online auction. Start of auction: 16 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 October 2017 18:01 GMT +0200 (Western Europe (DST) The pric ...

CNC Turning Machines Style 510/ STYLE-5-5820


Auction name Tool manufacturer Cupedo & Zn at Berkel and Rodenrijs Public online auction. Start of auction: 16 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 October 2017 18:01 GMT +0200 (Western Europe (DST) The pric ...

Rotational Viscometer HAAKE Viscotester 550


Operational temperature: -20 to 100°C, viscosity: 1-1000000mPas, rotational speed: 0.5-800/min, reproducibility: /-1%, sensors: 2 cups, 2 rotors, frequency: 50/60Hz, voltage: 100-240V, rotational speed: 0.5-800/min, torque: 0.1-30mNm, testing time: 60s,  ...

más preocupación por sus problemas financieros individuo individuo


I am an individual who provides loans to international. With capital to be used for loans between individuals in the short and long term ranging from 5000 € to €1,000,000 all serious people be on real needs, the interest rate is 3% for the duration of r ...

ILLIG RDM70K Mold ILLIG 95 mm dia Mold


1 x Used ILLIG RDM70K Mold manufactured by ILLIG for 95 mm dia. PS Cups, 12 Cavity. Together with Collector Plate, Guide Rods and Stacking basket for the ILLIG UG70B Stacker/ Counter

Blow molding machines Alfa Lavel FRV 10/40


Wine in a glass line. • Alfa Machines 'FRV 10/40' Wine Cup Form, Fill and Sealing Machine Machine used for producing thermoformed cups (wine glass) forming, filling and lid sealing - Machine spec - Filling capacity 185 ml per cup, 5 cups per machine cy ...

Cup Printer 8-Color Polytype BDM611-816


Used POLYTYPE BDM 611-816, 8-Color Cup Printing Line age end 1999 :- Automatic Conveyor-feeder (acts as a accumulator) Universal screw Denester ARCOTEC CG30 Corona Pretreatment System ARCOTEC CG20 Leak Tester System 8-mandrel Indexing Turret, with ...

Cup Printer 8-Color Polytype BDM611-816 8-Color


Used POLYTYPE BDM 611-816, 8-Color Cup Printing Line age end 1999 :- Automatic Conveyor-feeder (acts as a accumulator) Universal screw Denester ARCOTEC CG30 Corona Pretreatment System ARCOTEC CG20 Leak Tester System 8-mandrel Indexing Turret, with ...

Paper Cup Machine DEBAO ZBD-B


Cup type: 6OZ, output: 70-90cups/min, top cup diameter: 90-150mm, bottom cup diameter: 60-115mm, cup height: 50-135mm, paper thickness: 230-350g/m².

Vertical Cartoning Machine SENZANI IVF5


Performance: 60-65folding cartons/min, main motor: frequency controlled, folding cartons dimensions: 140x60x212mm, other formats can be retrofitted, dosage: plate dispenser with 5 telescopic dosing cups, volume: 1.4-2.3dm³, tab locking sequence: classic s ...

Paper Cupcake Form Maker


Bottom diameter: 10-60mm, without tools, there are two machines available.

CNC Punching Machines DANOBAT Cupra 30


OVERVIEW: Brand: DANOBAT Model: Cupra 30 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2010 Production hours: 16770 Location: Italy Origin country: Spain GENERAL DATA: Measuremen ...

Egg Breaker SEYMOUR Foods 104-B, 104-C


Number of machines: 5x104-B, 1x104-C, components per machine: (1) infeed conveyor for stacks of 6 humps each (2) Egg Stack Loader and Conveyor Table (3) Egg Breaker and Seperator with mit seperation cups for egg yolk, output: 30000eggs/h, year of construc ...

Cup filling machines and sealing machines Hampa BK100


Used Hampa Filling and Packing Line Manufacture of Year : 2012 These facilities are used very little.

Cup filling machines and sealing machines GEA -FINNAH TYPE 2608


Complete Filling,sealer and packing line Manufacture of Year :2013 Manufacture of Year :2012 Capacity : 32,400cup/h This facility worked very little time. for more information contach from us.

Recycling units Beaker control manual Cup: 1.100 500


Auction name: Auction | Mining Auguste Victoria (52492) Public auction Online. Start of auction: 13 June 2017 16:00 GMT +0200 (Western Europe (DST) Closing time: 18 July 2017 11:00 GMT +0200 (Western Europe (DST)) The price listed is an opening ...

Welding Machines Powermaster Sunnen 2-cup drill


Auction name: Machinefabriek Moors in Mill (1/2) Public online auction of metalworking machines due to restructuring and relocation of business processes Machinefabriek Moors, including: Global Challenger CNC Cutter Bank, FPT CNC Bedfreesmachine, Spinn ...

Vacuum Tube Lifter SCHMALZ JumboFlex 35


Load capacity: 35kg max., workpiece format: 200x200-2000x1000mm, lifting speed: 60m/min max., weight: 530kg, lift tube diameter: 100mm, operational hours: 45h, including base plate and 3 suction cups for different applications, was overhauled annually.
Find used machinery dealers in your country