138,021 used machines on RESALE, but how to find them? Machine Search
Description 3,000 litre tank of RT water 04-B-100 4.000 liter tank acid 03-B-100 4,000 litre tank lye 02-B-100 2,000 litre tank of fresh water 01-B-100 2 x Soaking tank 27 m3 Material: 1.4301 Weight: approx. 2000 kg Service conditions: Inner container druchkos, 20°C when cleaning 85°C Execution: Surface inside bright rolled III c Surface outside of polished III c Seams sanded inside Ra < 0.8 μm, except fillet welds Seams stained and brushed on the outside N11 1 Piece DN 200 DIN 11850 Spout N10 1 piece DN 65 drainage nozzle with strainer N9 N8 N7 Company Sign N6 1 piece DN 25 DIN 11850 Cable conduit (ends flared) N5 1 piece DN 50 DIN 11850 inlet N4 1 piece DN 500 manhole with limit switch Schmersal N3 2 pieces level sleeve N2 1 piece DN 25/65 CIP removable N1 1 piece DN 250 Vent with vapour drain 2 x hot water tank 15 m3 Material: 1.43 ...
Guntner condensator 150kW GVHX080,1B/2x1-MD.E 1200Eur Guntner condensator 264kW GVHX080,1B/2x2-MD.E 1400Eur Guntner condensator 289kW GVHX080,1B/2x2-ND.E 1500Eur Guntner condensator 32kW GVHX 050.1A/1-ND.E - 400Eur Guntner condensator 17kW GVM 040.1B/2-NW.E - 180Eur 2sht Guntner condensator 20kW GVM 040.1C/2-NW.E - 200Eur 3sht Guntner condensator 50kW GVH065.1A/2-X.E- 600Eur 1sht KUBA CA.06-1x2F OHNE VENT.E. 35kW - 700Eur LUVE SHVN 48/8 45kW - 400Eur LUVE SHVN 57/0 55kW - 500Eur LUVE SHVN 157 H/V 155kW - 1800Eur DT15K R404a VERY GOOD CONDITION!
FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller ...
FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...
FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...
Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer ...
Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...
Fortuna Head Machine Type: KM5 5 rows Weight range: 35-80 grams Hourly output: max. 5500 pieces With flour spreader cut + round off analog control can also be synchronized with a proofing cabinet 400V 50Hz Height: 170cm Width: 200cm Depth: 100cm
Waffle Cup Making Machine There are 4 different machines available, for different cup dimensions. Model: BM-260 - Mocaccino Model: ВМ-200 - Latte/Cauccino Model: ВМ-120 - Americano Model: ВМ-80 - Espresso Steps for production: - Preparation of the dough for the waffle cups - Production of the wafer cups on a cup production line - Preparation of the chocolate mass (melting of the chocolate briquettes/drops and tempering) - Pour the chocolate into the cup and turn the cup over so that the chocolate residue runs out of the cup - Cooling of the cups of chocolate on the work tables - Packaging of finished products in bags Technical data: - Number of molds per matrix: 32 pieces - Volume cup : 80 / 120 / 200 / 260 ml - Capacity: 320 - 480 cups per hour - El. Power: 18 kW - Weight: 655 kg - Dimensions: (L х W х H): 1,080 x 800 x 1,440 mm
with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...
Manual cleaning system for printing tools Type: HC-1000 Year of Make: 2020 good condition, fully functional, incl. stainless steel castors and various accessories (see photos) This revolutionary cleaning system is ideal for thorough and gentle cleaning of printing tools. Thanks to its well thought-out design and equipment with durable components, it meets the highest standards of efficiency and ease of use. Its detergent is non-volatile (VOC-free), fully recyclable and NEVER needs to be replaced thanks to the integrated recycling system. This saves time, reduces operating resources and disposal costs and also protects people and the environment. Features: - Completely solvent-free - Cleaning agent is recycled - No liquid waste - No explosion protection necessary - No suction necessary Equipment: - Flexible hose holder for precise work - Four sturdy stainless stee ...
WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW ...
CIP set - Moravek 5sa - Second Hand Moravek CIP 5SA designed to CIP and fully sanitises the keg filler and Moravek BC30 Beer carbonator with or without optional BF30 sterile filtration module. The Moravek CIP 5SA can also be used to CIP brewery conditioning, bright beer tanks and vessels up to 65HL (circa 2m internal diameter) when fitted with specified Alfa Laval spray ball cleaning heads as well as other ancillary brewery equipment Output flow adjustable range 500-5000 LPH Output pressure adjustable range 0-3 bar Capacity of tanks 2x250 litres Installed electric power max. 24kW Designed for cleaning BC30 Beer Carbonator, BF30 sterile filtration module, Can Pro 9/2 Filler/Seamer plus associated brewery storage tanks and vessels The unit is a mobile unit and can be used for CIP cleaning in other parts of the brewery as well. Measurements: Height: 1700mm approx. Length: ...
Packaging line consisting of: 1 4-chamber VA silo with bucket elevator, 1 multi-head scale MESOMA combinat 14S, type MD300/ME400, No. 11.02.-069, year of construction 1996, 1 flow wrapping machine MESOMA MD300, , 1 metal detector CINTEX,1 checkweigher OCS Ec, No. 1002883, year of construction 2005, with conveyor belt and dispenser, No. 11825/11208804, year of construction 2011, 1 packaging machine JP KV400, No. 362/2005, with control panel SIEMENS Simatic panel, 1 labelling and carton closure system COMARME gema 470, No. AZ026245, year of construction 2005 with labeller BLOHME Advanced.01, No. 10388, 1 carton folding machine BEDO VA 985, No. 985.1.52496, year of construction 1997
ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.
We sell a Lippelt Mini Rustica with guillotine and punch. Good bakery condition
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
Key data: 24 , 30 , 400
Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
Hygienio B1. N1 Steam Disinfection System The B1. N1 is ideal for outpatient clinics, doctors' offices, dental offices and smaller premises. Its compact size and unique features make it the perfect choice. If you are looking for a reliable and efficient disinfection solution without complicated handling, the Hygienio B1. N1 is for you. The ultimate, simplified disinfection system – designed for ease of use and handling. The B1. N1 does not have the electronic control unit and is therefore particularly easy and effortless to operate. Thanks to the manual and direct system status check, you have full control over the selection of the right application mode – whether disinfectant or steam. The liquid tanks are equipped with visual level indicators, so you can monitor the level at any time and prevent possible damage to the internal components. Mobility: 4 abrasion-resistant ...
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
Teledyne Isco CombiFlash Companion/TS The CombiFlash Companion personal flash chromatography system can be controlled and monitored from anywhere with any connection and Microsoft Windows® Explorer. It even notifies you via email once the separation is complete. The system's advanced automation and communication features give you the highest levels of productivity and peace of mind. This allows you to devote yourself to other tasks undisturbed while the cleanup is in progress. The touchscreen controller allows you to control the system locally on a clear screen. The optional solvent management module controls up to four solvents online and monitors their levels, so you're never left without solvents. Companion uses precision-packed RediSep® RF columns to extract more virgin material in less time than glass columns or other disposable columns. Columns from 4 g to 330 g can be ...
Available EMCII to SD machines - P76 - -> sold - P92 - P115 --> sold
Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automatically isolates nucleic acids within one hour. Viral RNA from 96 nasal mucosal swabs can be isolated simultaneously. The Chemagen MSM-1 is an automated system for the high-throughput isolation of nucleic acids (DNA/RNA). It uses a patented magnetic bead technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect the bound particles and bring them back into suspension. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24 or 96 samples simultaneously, depending on the rod head used. Sample volume: It offers high flexibility for volumes from 10 μL to 10 ml. Processing time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min ...
LaserTec FullSet Monolith 265 industrial energy storage system was built by LaserTec S.A. in Poland in 2023. This highly advanced machine is a key component of a company’s strategic energy management. It allows the storage and management of electricity at the most cost-effective times, bringing tangible savings to the company. The system also plays an important role in stabilising and reducing overloads on the local network, which is particularly important in industrial plants where the continuity of production processes is critical to maintaining operational fluidity. The FullSet Monolith 265.50h energy storage system accumulates electricity from both photovoltaic installations and the grid. The battery modules made of NMC lithium-ion cells are characterised by timeless durability. Off-grid operation, on the other hand, provides emergency power in the event of power cuts. This solu ...
free-standing crane system Dimensions: width x height x length, approx. 4 x 9 x 21m Two trolleys, 1000kg each In the build-up state
KG dosing unit, Fabr. Schenk, Type: DA100, in stainless steel, with agitator with engine Bauer on top, standing on mobile feet
Equipment: Code reading system HHS Xtend² for color codes consisting of: • Control unit X-tend² with code reader • Encoder with bracket • Touch screen screen • Folding switch with reading head CT10 • Bobst turntable ejector • Cable set complete for Bobst folding carton gluers
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC
Machine light, machine light, work area light, system light, compact light -Manufacturer: Rittal, LED system light SZ 4140.840 -Price: per piece -Numer: 3 pieces -Dimensions: 525/50/H30 mm -Weight: 0.4 kg/piece
Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg
Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg
Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request
FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...
Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.
Oil mist separator, extraction system, oil mist extraction, suction Brand ANAG Dimensions: wxlxh 55x68x50cm 230V, 50 Hz Quantity: 2 The price is net and is valid for 1 piece.
Hazard lights, night markings, flashing lights, day/night markings -Reetec: Control system for hazard lights in wind turbines -Type: W, red slimline THSLW -Dimensions: 210/255/H70 mm -Weight: 3.5 kg
Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 -Dimensions: 430/330/H680 mm -Weight: 27kg
Paint roller machine, roller coating machine, powder coating system -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg
SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts
Bitzer shock freezer, freezer unit with evaporator and switch box
exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter -Filter system: Manufacturer/type unfortunately unknown flange dimensions DN100 -Individual components: see photos -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg
Pressure measuring device, flow measuring device, measuring and control technology, measuring device -imc: universal measuring device µ-MUSYCS -Voltage: 110 - 230 V AC/DC -Dimensions: 330/345/H145 mm -Weight: 6.4 kg
ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433
-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds
maximum number of results exceeded
please refine your search
