ctp system heidelberg used for sale

Pump control for centrifugal pumps, high-pressure pumps, water pumps, multi-stage vertical centrifugal pumps, control units, comfort control technology -Manufacturer: Wilo, control unit with control board / control card -Control device: Type CR system -Control card/board: 7022034.3 CR-LP-N 002 008 008 -Shipping/Price: complete -Dimensions: 270/230/H90 mm -Weight: 2.1 kg

Measuring machine, measuring and marking machine, coordinate measuring machine, coordinate measuring machine, form tester, clamping plate, marking and marking plate, measuring plate, measuring table, welding table, welding table, surface plate -Manufacturer: Stiefelmayer Type C-System -Digital display: Stiefelmayer type MZ 2000 -Travel paths: X 2450 mm, Y 1215 mm, Z 1645 mm -with: 6x adjustable feet -Accessories: see photos -Measuring plate: 2000/3000/H355 mm -Dimensions: 2540/3000/H2630 mm -Weight: 4660 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Soco, conveyor belt, transport belt, belt conveyor from packaging machine -Speed: 21 m/min -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Transport dimensions: 780/640/H620 mm -Weight: 36 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm -Number: 2x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Soco System, Conveyor belt type 2EL016G-A, unused, original packaging -Width: 380 mm -Length: 1560 mm -Quantity: 2 pieces available -Price: per piece -Transport dimensions: 380/200/H130 mm -Weight: 1.4 kg

Cable winch, hoist winch, construction winch -Mechanical winch: with planetary gear without drive -hydraulic brake -Traction force: approx. 20,000 kg -Drum: Ø 500 mm -Rope diameter: 24 mm -Rope to be wound length: 2x 28 m -Number: 2x winches available -Price: per piece -Dimensions: 1640/700/H700 mm -Weight: 1026 kg/piece

ASPARAGUS PEELER, CHRISTIAENS AGRO SYSTEMS, TYPE: 1350-6 Technical description: Machine number: 062 906 Heads number: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1650 x 2000 x 1600 mm

CHRIST PACKING SYSTEM WRAPPING MACHINE FILMTEQ 3030 Fully automatic wrapping machine with innovative sealing unit with automatic spindle locking, for secondary packaging of products using polyethylene film. Modular configuration for integration with other machines and systems, with ergonomic balcony technology for quick format changeover. Ideal for industrial applications that require efficiency, accuracy and adaptability. Built in 2015. CHARACTERISTICS - Production: up to 60 cycles/minute - Wrapping material: Low-density polyethylene film (LDPE) - Packaging type: Single band wrap, with side shrink, or full wrap - Film width: From 30 mm to 300 mm - Maximum reel diameter: 400 mm - Grouping dimensions: (L): 60–400 mm/(W): 60–240 mm/(H): 30–230 mm - Single product dimensions (with stacker): (H): 15–400 mm/(W): 15–90 mm/(H): 60–240 mm ENERGY ...

Description MicroJet Slide Feeder MJ 45 A with MicroJet Conveyor Belt

Substructure for conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand, frame for roller conveyor -Manufacturer: Soco System, base frame height adjustable -Type: Width 475 mm -Height: 535 to 900 mm, continuously adjustable -Quantity: 1 piece base available -Transport dimensions: 475/180/H535 mm -Weight: 8 kg/pc.

LaserCleave for Simplex Connectors Used, bought as seen Viewing by telef. Arrangement possible

This IMA AM33 - 3000 /1300 Systems unloading and stacking station was manufactured in 2005. It is a robust and reliable choice for your automation needs. Contact us for more information.

Pitch: 32 mm Working width: 896 mm Boring depth max.: 65 mm Motor output: 2x1,5 kW Overall size: 1122x1040x1250 mm Weight: 380 kg Number of boring spindles: 29 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 1088 mm Boring depth max.: 85 mm Motor output: 2x1,5 kW Overall size: 1320x1040x1250 mm Weight: kg Number of boring spindles: St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 704 mm Boring depth max.: 70 mm Motor output: 1,5 kW Weight: 310 kg Number of boring spindles: 23 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt systems 21 or 23 according to the desired layout. For the selected asset or your existing lines. Curves, switches and drives can be adapted according to your wishes. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The testing device can measure even the smallest leaks in packaging (helium detection)., The device is little used and in good condition., Information from the manufacturer’s brochure:, The detection limit of < 10-8 mbar l/s of the CONTURA Z can only be determined by mass spectrometric, Analysis can be achieved with a test gas., However, when sensitive flexible packaging is exposed to such a pressure difference,, the sealing seams could be subjected to such severe stress that the package could even burst., Such stress is eliminated by the patented membrane chamber principle of the CONTURA Z²., Function:, The product to be tested is placed manually or automatically on the bottom membrane. When the lid, is closed, the test procedure is initiated automatically., During the evacuation, the pressure of the atmosphere pushes the highly elastic membranes against the, packaging, and the conto ...

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Reference Num.: 3459 Brand: SIS Paßsystem Type: 50 x 70 cm Available: directly Status: In production Location: Deutschland

Reference Num.: 4284 Brand: Duplo Type: System 4000 Available: directly Status: In production Location: Deutschland Equipment: - Broschürenfinisher mit Frontschnitt - 10 Stationen - Hefteinheit - DUPLO Fronttrimmer DBM-400LS - Falzeinheit

10852025 Beverage Can Filling Line – 1500 Cans Per Hour with CASK mACS Filler (2022) High-quality beverage can filling line with integrated Cask Brewing Systems Inc. mACS can filler, manufactured in 2022 and designed for efficient small- and medium-scale beverage production. This canning line is suitable for beer, kombucha, cider, tea, carbonated soft drinks, and still beverages. The system combines reliable filling technology, flexible can handling, and low-oxygen filling performance to deliver excellent product quality and shelf stability. The line includes a semi-automatic can depalletizer, rinser, conveyor system, and CASK mACS V2.0 three-head can filling station. The depalletizer operates with forklift-assisted pallet loading, allowing cans to flow smoothly by gravity through the rinsing section and into the filler infeed system. The CASK mACS Micro Canning System utilize ...

Manufacturer: Sidasa Type of Machine : ZT100+ Centrifuge System Year of Manufacture: 2017 Application: Zinc Flake Coating for Bulk Small Parts Includes: Associated Dryer CE Certified Technical Specifications - Maximum Coating Capacity: 7.5 tons per hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Dimeco 1675/D richtmachine met CNC-aanvoersysteem (cybelec) - breedte: 500 mm - maximale dikte: 1,6 mm

Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Manufacturer: Heiche Model:HEIS01 KTL system Year of manufacture: 1982 Major overhaul: 2008 to 2013 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 1,240 x 800 x 600 mm - Max. workpiece carrier weight: 160 kg - Coating material: KTL paint (cathodic electrodeposition) - Coating thickness: 10 to 45 micrometers - Cycle time / throughput: 190 seconds per cycle (18 workpiece carriers per hour) - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 9,000 x 12,000 x 7,000 mm - Number of baths: 15 - Number of loading and unloading stations: 6 - Conveyor system: Chain conveyor by KEWESTA - Dip system: Lifting station by Klaus Sessler - Drying: Curing oven by Rippert Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Con ...

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

Ref. no.: 18636 Manufacturer: EICHHOLZ Year of construction: 2014 Further information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers. Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems. These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale: 1 heavy-duty industrial octabin tipper / material discharge system. The system was removed from a ...

Professional packaging machine from a renowned European manufacturer for adhesive tape width up to 50 mm. Maximum carton dimensions approximately: width 525 mm x height 505 mm; length unlimited. It is a robust machine for the highest requirements. -Closure of the package on both sides at the top and bottom with adhesive tapes. -Transport speed up to about 20 m/min. -Different cardboard formats are infinitely adjusted in height and width via a quick adjustment system (without crank). -The working height is adjustable from 635 to 950 mm. Special features/ options: -The scope of delivery includes an inlet track with a length of about 1 m and an outlet track with a length of about 1 m. There is a stopper plate on the run-out track, which can also be dismantled if necessary. Both roller conveyors are adjustable in height and inclination. -The machine has an adjustable closing device fo ...

Offer 25338 Technical data: - Length 1300 mm - Width 800 mm - Top height 215 mm - Wall thickness 15 mm - Hole diameter of the holes approx. 28 mm - Center distance of the perforations each approx. 100 mm - Table height approx. 970 mm - Total weight approx. 400 kg

Progress M-System Mesh Welding Machine, Type EVOLUTION 2012 Complete mesh welding system for the production of customised reinforcement mesh from straightened wires. Main Components MMR straightening machine with 6 wire lines SWR welding machine with 6 welding heads Technical Data Maximum mesh size: Width: up to 3,500 mm Length: up to 9,000 mm Wire diameters: Longitudinal and cross wires: 6, 8, 10, 12 and 16 mm Mesh dimensions: Maximum width: 3,500 mm Maximum length: 9,000 mm Minimum width: 500 mm Minimum length: 1,000 mm Bar dimensions and accuracy: Maximum bar length: 9,000 mm Minimum bar length: 500 mm Bar length tolerance: ±5 mm Bar placing accuracy: ±10 mm Description The Progress M-System EVOLUTION 2012 is designed for the flexible production of customised reinforcement mesh in a wide range of grid patterns, dimensions and wire diameter ...

WE HEBBEN 46 KEER: EuroScaffold rolsteigerframe 75 × 28 × 7 × 6 keer EuroScaffold steigerplatform 190 cm met luik X 2 KEER EuroScaffold leuningframe AGS Pro 190 cm x 1 keer EuroScaffold horizontale schoor 190 cm x 4 keer EuroScaffold diagonale schoor 190 cm x 6 keer Steigerwiel Ø200 mm met stalen as, 500 kg, nylon X 4 TIMES Steiger telescopische stabilisator 200 cm x 2 keer EuroScaffold aluminium kantplankenset X 1 TIME Leuningklemmen X 8 KEER TOTAAL Gewicht: 153 KG x 46 = 7000 KG EN Verstelbare stabilisatoren 200 x 92 keer TOTAAL Gewicht: 9 kg x 92 = 828 kg

Key data: 800 kN

Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Manufacturer: 3D Systems Model: nextdent 5100 Year of Manufacture: 2023 Type of Machine : 3D Printing Machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU245P309 MakeBuss AG Basel TypeM-1000 :Easy Clean: No.7050 Year of construction1988 Mounted on frame:Easy Clean: Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket8 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor10 KW Specified Features - Paddle dryer Paddle dryercheck Capacitynett.700 Ltr (1375 ltr) Outletdia.400mm External heating spiral(30 Ltr) Shaft can be heated(33 ltr) Max. temperature160 degr C With mechanical sealcheck Motor10 kW, 220/380 Volt (EEx-e-II-T3) With variable speed drivecheck Speed mixing shaft5-30 rpm With vacuum pumpApovav PMH 136 D2 X3 Motor2,5 KW, 380 Volt MaterialStainless steel 1.4435 (316L) General LocationBarneveld With switchgearcheck Floorspace5,5x2,0 M Total height+/- 4,0 M Weight6000 KG Extra SpecificationsComplete system including&:nbsp:(2x) Vapor condensor U-type, sur ...

Manufacturer: Waldner Process Systems,Condition: used,Volume: 1,000,Topboard: open with loose lid,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 990,Cylindrical height: 1,260,Total height: 1,850,Type plate: No,Equipment: disc, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Tanks slightly out of round due to their design Container with smaller (sometimes also somewhat stronger) dents Partly the container feet are pressed into the lower bottom Plastic (2 containers are missing lids, one lid has holes in the lid

This IMA Novimat Systems I/R75/1000 edgebander was manufactured in 2005. It features a robust ICOS OPEN control system, a jointing milling unit with powerful motors, and a versatile multi-functional processing unit for detailed edge finishing. The machine includes a 32-position edge magazine and an advanced gluing unit with an automatic PU melting system. Consider the opportunity to buy this IMA Novimat Systems I/R75/1000 edgebander. Contact us for more information about this machine.

A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment.

Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3  ...

We are offering for sale a complete used VAS thermal oil system built in 2003 thats fully functional . Technical Specifications: - Thermal output: 6 MW - Electrical output: 1.1 MW (ORC) - Year of construction: 2003 - Note: ORC module available for separate purchase System Components : - Material supply system - Firebox with grate - Thermal oil boiler, heat exchanger, and Eco unit - Thermal oil piping, components, thermal oil, and insulation - Filter system - Chimney system and flue gas ducts including insulation - ORC module and generator - Ash disposal and ash container - Hydraulic units including lines and hydraulic oil - Electrical system and control cabinets - System control including PC and software - Air compressor, dryer, compressed air tank, and compressed air lines - Aboveground heating network including insulation, heating valves, and heating pumps - Overhead crane - Water  ...

AIRCOOLED CHILLER SYSTEMAIR SYSCROLL 240 AIR CO E COAT 238.1 KW Cooling capacity: 238.1 kW / 67.7 tons (12/7 — 35°C) Year of manufacture: 2017 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD80385VAB4-2 (scroll) + 2 pcs. Bitzer GSD80295VAB4-2 (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. Hydraulic module: 1 pcs. water pump Wilo IPL65/130(136)-5.5/2-ERCD, expansion vessel. Dimensions: 3.54x2.18x2.5 m Weight: 1786 kg Working hours: 321/627/618 h. Condition: Good

Used combination weigher and raw material feeder manufactured by Ocean System. New: 2019. Technical specifications: 10-head model Power supply: AC 220V Frequency: 50/60 Hz Current: 10 A Power: 1.0 kW Number of heads: 10 Weighing range: 10–1000g Dimensions (L/W/H): 1105/1027/1250 Tray capacity: 1600ml Max. speed: 65 doses/min Number of programmes: 0–99

; Power [PS]: 170; Gross weight [kg]: 3701; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x100kW, 1x30kW, - AC copper: 3P/4W, 100kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x100kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 100k

; Power [PS]: 408; Gross weight [kg]: 9424; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x300kW, 3x30kW, - AC copper: 3P/4W, 300kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x300kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 300

; Power [PS]: 544; Gross weight [kg]: 12000; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x400kW, 4x20kW, - AC copper: 3P/4W, 400kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x400kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 400

; Power [PS]: 680; Gross weight [kg]: 14240; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input: , - AC socket: 3P/5W, 1x500kW, 5x16kW , - AC copper: 3P/4W, 500kW , - DC socket: 110kW, Power Output: , - AC socket: 3P/5W, 1x500kW , - AC socket: 1P, 1x16A; 3P, 1x32A , - AC copper: 3P/4

; Power [PS]: 98; Gross weight [kg]: 3000; Engine: Battery System: LIFePO4; Accessories: Battery, Control Panel, Power connection Input:, - AC socket: 3P/5W, 1x60kW, 1x30kW, - AC copper: 3P/4W, 60kW, - DC socket: 60kW, Power connection Output:, - AC socket: 3P/5W, 1x60kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 60kW

Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table