137,637 used machines on RESALE, but how to find them? Machine Search
CAVALLERI CT14 (the video was taken before and during reconditioning), Min/Max cutting length 250/1.500 mm. Max web width 1.250 mm. Max unwinder diameter 1.030 mm. n.2 unwinders available max reel weight per shaft 1.020 kg., pneumatic brakes on reel holders will be added before shipping, if requested by client., nominal max thickness 220-250 gr/sqm antistatic bar, photocell, sheet counter, all parameters are controlled by electronic control panel total dimensions LxW 2,2 x 4,8 mt. kg. 4.200, constructed in cast iron sound level under 85 Db encoder w/servo motor - power 18 kw, Construction year 2000 machine offered in good working conditions, check on [this video](youtu.be/867xqXH-bb0), availability: STOCK, conditions: reconditioned, type: CT 14, TEST POSSIBLE: YES
Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request
PTC CTR-C cold water trailer similar but no dynajet, oertzen, falch, ROM, Rioned, plaid, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min. at 180bar | Petrol Engine: Honda GX690 17.7kW CTR-C 55/160 | 55l/min. at 160bar | Petrol Engine: Honda GX690 17.7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel Engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel Engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD reel: manually with max. 1/2" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Water tank: 400 l - Op ...
PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...
20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG
Heidelberg SM 52-4, All washing facilities, Autoplate, CPC (spetioal edition), color adjustment, only 39 mil print number, still in production, in very good condition, and CTP system is also available with added, immediately available
We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!
CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock
CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm
Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight approx ...
Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each
Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes
CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Regulation: - 32 bit controller - LCD control panel - Digital display of target and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test object control Technical performance data Temperature checks: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K temporally Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat irradiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, a ...
Press Brake, ESPE CTO 80, Used Machine Manufacturer: ESPE Model: CTO 80 Pressing force: 80 tons Bending length: 2500 x 3 mm Table dimensions: 2500 x 160 mm Main motor power: 10 kW Weight: 6100 kg
The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg
Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M
CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 24 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pre ...
Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma
CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours ...
Nilfisk CTS40-LZ22 Industrial vacuum cleaner 2008, industrial vac cleaner, 4Kw rated, mobile, 3Ph
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-CT2-6022 6kW Specifications - Maximum sheet size: 6050x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Maximum load: 3840kg - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 14580mm - Width: 4300mm - Height: 2350mm - Weight: 16800.0kg Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm - Brass: recommen ...
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1370 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP55 -Dimensions: 245/138/H180 mm -Weight: 6.4 kg
Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes: from a machining center BJM type ALBZ-145 -Tool change system -CUT changer -RIG changer: RIG 06-12-P003 VX VCP -Drive motors: MGM -Dimensions: 1400/950/H830 mm -Weight: 380 kg
REF-2305-2306-2307 PEACH STONING AND HALVING MACHINE FOODTECH 320 APA Stoning and halving machine for peaches. Manufacturer: CTI FoodTech Model: 320 APA Year: 2014 Automatic continuous orientation system. Stoning system with rotation of the blades driven by a high-revving motor. Automatic lubrication system. Output: up to 320 pieces/min (approx. 3,000 kg/h) Installed power: 3 kW/4 HP Infeed height: 1,200-1,070 mm Outfeed height: 490-590 mm Overall dimensions: length 5,238-5.763 mm; width 1,810 mm; height 1,930 mm Net weight: 2,100-2,300kg Water consumption (40 psi): 35 l/min
DMG GILDEMEISTER CTX ALPHA 300 CNC turning center was built in 2008. The machine, designed for machining workpieces with a maximum diameter of 500 mm, is equipped with state-of-the-art technical solutions that guarantee extraordinary accuracy and precision. Machining is performed inside a large, fully illuminated workspace by a reliable spindle and high-quality cutting tools taken from a 12-position turret. In turn, the operator is provided with a state-of-the-art touchscreen control panel with a perfectly optimised FANUC CNC controller. High reliability, precision and structural stability make the GILDEMEISTER CTX ALPHA 300 CNC lathe the perfect choice for even the most intensive production work. The total weight of the machine is approximately 4350 kg. Technical data of the DMG GILDEMEISTER CTX ALPHA 300 lathe - maximum turning diameter: 500 mm - maximum cutting diameter: 200 mm ...
Producer: Fritsch Condition: RENOVATED Made in Germany Description This Fritsch Line includes Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year
DMG CTX 510 ECO CNC turning center built in 2011 is used for precision machining of workpieces with a maximum diameter of 465 mm. This extremely efficient and perfectly optimised machine features a specially constructed, inclined bed that effectively dampens all vibrations and oscillations. This solution ensures the highest possible process stability, bringing results such as improved workpiece surface quality or increased cutting tool life. Workpiece machining is carried out using reliable components in the form of a high-speed spindle and cutting tools taken from a 12-position turret. Tools are changed in a very short time, so that the overall process time is significantly reduced. The DMG GILDEMEISTER CTX 510 ECO CNC lathe also features an intuitive SIEMENS CNC control and an integrated chip conveyor. The total weight of the machine is 7800 kg. Technical parameters of the DMG CT ...
DMG GILDEMEISTER CTX 510 CNC turning center was built in 2008. Designed for machining workpieces with a maximum diameter of 465 mm, the machine features a fully illuminated workspace, a high-speed spindle and high-end cutting tools. The extremely stable design combined with the perfectly optimised SIEMENS CNC control ensures maximum process efficiency, even during the most intensive production work. The DMG CTX 510 CNC lathe weighs 7500 kg. Technical specifications of the DMG GILDEMEISTER CTX 510 lathe - maximum turning diameter: 465 mm - maximum swing diameter: 680 mm - maximum swing diameter above cross guideway: 465 mm - maximum external diameter of clamped workpiece: 400 mm - feed in the X/Z axis: 300/1050 mm - rapid traverse in X,Z axis: 30 m/min - maximum spindle rotational speed: 3500 rpm - spindle passage: 97 mm - spindle drive power (40%/100% DC): 42/31 kW - chuck s ...
DMG GILDEMEISTER CTX 410 CNC lathe built in 2006 is an extremely powerful machine designed for precision machining of workpieces with a maximum diameter of 320 mm. The machining process is performed inside a large, fully illuminated workspace using reliable components in the form of cutting tools and a high-speed spindle. The specially designed inclined bed effectively dampens all vibrations and oscillations, resulting in better quality of the machined surface and increased tool life. The offered DMG CTX 410 CNC turning center is also equipped with an integrated chip conveyor and a perfectly optimised, intuitive HEIDENHAIN CNC control. The total weight of the machine is approximately 6000 kg. Technical specifications of the DMG GILDEMEISTER CTX 410 turning center - CNC controller: HEIDENHAIN - turning diameter: 320 mm - turning length: 600 mm - feed in the X/Z axis: 250/635 mm - ...
Key data: 500 mm, 450 mm, 6000 1/min
1 used CNC lathe Make Gildemeister Model CTX 320 V5 Linear Year of manufacture 2004 Control Siemens 840 D ( ShopTurn ) Workspace: Max. circulation diameter over bed 500 mm Circumferential diameter via X-carriage 300 mm Turning length 450 mm Bar passage 60 mm Chuck diameter 170 mm Chuck diameter sub-spindle 165 mm Plane stroke 160 mm Rapid traverse X/Z axis 60/45 m/min Power main drive (100% ED) 16 kW Speed range 6000 rpm Power sub-spindle (100% ED) 7.5 kW Speed range 6000 rpm Number of tool stations 12 Cylindrical shank diameter 30 mm Number of driven tools 12 Drive power (40% ED) 10 kW RPM, max. 5000 min-1 C-axis speed range 0 - 200 min-1 C-axis positioning 0.001 degrees Connected load, total approx. 32 kVA Net weight with chip conveyor approx. 4300 kg Machine with chip conveyor L x W x H 3890 x 1555 x 1890 mm Accessories: Conveyor Pa ...
REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Electrical specifications: 3x400 V+N+PE/50 Hz/16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.
REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.
faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. Spindle speed: 5000 U/min. travel -x axis: 160 mm travel -z axis: 450 mm numbers of turret head positions: 12 tool taper: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4,5 x 2,5 x 2,5 m weight of the machine: 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Linde Cryoflex CTFA4-60 Cryogenic Freezer Serial: 3002097/2 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph
HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier ...
This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 2 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. -Specifications: number of feeding tracks: 2 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 10mm, max. ? 60mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | machine dimensions: LxWxH customized. The image shows the 8-line version. Please note that our new prices are often below the u ...
This machine is suitable for counting of candies, biscuits, nuts, small vegetables such as peas, beans, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. - Specifications: number of feeding tracks: 1 | capacity: max. 1200 pcs/min (subject to the size and shape of the products and accuracy requirements) | product sizes: min. ? 1mm, max. ? 30mm | accuracy = 99,9% (subject to the type of products and counting speed) | large infeed hopper | compressed air: 6bar | power: 220V, 0.5kW | machine dimensions: L900xW400xH800mm, weight: 70kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from a ...
This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 4 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of feeding tracks: 4 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 10mm, max. ? 60mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | machine dimensions: LxWxH customized. The image shows the 8-line version. That machine/system is available in different versio ...
This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 8 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of feeding tracks: 8 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 10mm, max. ? 60mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | machine dimensions LxWxH: customized | weight: approx. 550kg. That machine/system is available in different versions for diffe ...
Small compact desktop counting machine, stainless steel (SS304) version. Counting 1-100 pcs into bottles, cans, etc. Operation through elektromagnetic vibration: tablets are falling into the counting plate which then turns and release the required number of tablets to the outfeed into the bottle or other container. By changing the counting plates the size and number of tablets can be changed. Low noise and easy operation. - Specification: Speed: max. 20 fillings/min | 220V, 180W | machine dimensions: L600xW500xH700mm | weight: 50kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machin ...
This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. The 8 tunnels vibration feeding device ensures an evenly feeding and no breakage of product. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of vibrating tracks: 8 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 5.5mm, max. ? 38.5mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | all the parts in contact with the product are made of Stainless Steel 316, other made of Stainless Steel 304 | mac ...
The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...
The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels with 99,9% accuracy. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle. Easy to operate touchscreen, stainless steel version (SS304). - Specifications: error rate: < 0.1% | number of vibrating tracks: 16 | capacity: max. 5200 pcs/min | counting range: 15-9999 pcs | product sizes: min. ? 3mm, max. ? 22mm | container: ?(25-75)xH(0-240)mm | infeed hopper volume: 38l | compressed air: 0.15m?/6ba ...
maximum number of results exceeded
please refine your search
