crushers used for sale

used MoCo shredder main machine with gearbox and motor 7,5 kw

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

High-performance fine cone crusher Calibrator 1600/300 H III

TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...

Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

TECHNICAL SPECIFICATIONS Manufacturer: LOKOMO Description: Semi-Mobile Crushing Plant Type: Stationary Year of construction (complete complex): 2009 Crusher Type: C 100, Single Swing Jaw Crusher Inlet opening: 1,000 x 800 mm Throughput: 150 - 200 t/h Maximum feed size: 600 mm Drive power: 132 kW Broken product: 0 - 120 mm Adjustable gap width: minimum 100 mm Feed hopper capacity: 25 t Drive power vibratory feeder: 18 kW Discharge belt: 12,000 mm length, 1,000 mm width Drive power discharge belt: 22 kW SPECIFIC COMMENT - Complete system - Designed and refurbished in 2009 (no use yet) - Numerous spare and wear parts included - Incl. hydraulic hammer type RAMMER S 25

ORDER NO. 7089 TECHNICAL SPECIFICATIONS - loading hopper inlet 1020x1230mm - rotor working width 1020mm - rotor diameter 348mm - main motor 22kW, 400V, 50Hz - pump motor 0,75kW - number of knives 50pcs - knife size 35x35x20mm - sieve 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – autorewers – for WEIMA WL 10 – German production – pressure drawer – very good condition – used chipper, DTR+CE documentation

ID3500 Crushing plant for the production of frost protection Crushing plant for the production of frost protection Crushing plant for the production of frost protection consisting of: 1) Humboldt - double knee crusher Type: BDG 900 x 700 Jaw width 900 x 700 2) Pfister vehicle scale type TAW 30 Maximum load: 30 tons Bridge size: 8 x 2.5 m Standard printing unit as a recording device 3) Steel sheet silo for individual installation 4 supports made of IP beams Total height 8 m, clearance height 3 m Outlet 600 mm, silo closure as a flat slide with rack adjustment and handwheel operation. An electric vibrator was subsequently attached to the outlet. 4) SBM impact grinding mill type PMM 10/6/4 export 5) Push-cart feeder type SW 1000 x 4000 with inlet hopper for the crusher 6) Existing conveyor belts 7) Screening system Parts lists and purchase invoices are available for mo ...

SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover

Manufacturer: SBM Model: V10H Total Year of Manufacture: 1994 Weight : approx. 9,000 kg with 200 kW engine Type of Machine: Vertical Crusher Find more here - / Contact us at -

ID3355 Grit Plant/Split Plant year/Year of construction 2002 Grit plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16 Split plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16

We offer here the completely overhauled engine replacement CAT C13,Engine number:KWJ04492,Arr:366-0290 complete with starter, alternator + EGR cooler. If you are interested, please contact: MIW GmbH Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281 950583 Mail: infoatmiw-zeven

ID3508 Svedala H45 Cone crusher Cone crusher

Jaw Crusher System for Sale Manufacturer: 3-B-Systeme Year of Manufacture: 1992 Operating Hours: 2,144 h The system consists of the following components: - . (Pos.1) 1 piece Müller jaw crusher, Rottweil, 800x500 mm inlet opening .Jaws approx. 70-80%, upper part new. - (Pos.2) 1 piece of steel construction from 3-B-Systems with pre-screening and bunker attachment - (Pos.3) 1 piece crushed material discharge belt - (Pos.4) 1 piece overband magnet - ( Pos.5) 1 piece 200 kVa power generator, soundproofed Find more here - / Contact us at -

Rubbel master RM 100 stone crusher, built 2010, overhauled this year, new radiator, regular serviced motor and newly repainted shell. Available immediately. Grid unit OS 100 from 2011. Ca. 7,524 working hours. Test and presentation possible can also organise transport inside EU with our own trailors. More photos on request.

ID3642 Nordberg G11 Fine year/Baujahr 2000 Cone crusher, 160 KW electric motor, with spare cone and casing, with inlet trough Cone crusher, 160 KW electric motor, with spare cone and jacket, with inlet tank

TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Double Toggle Jaw Crusher Type: KS 1250/1000/04 Year of Make: 1997 Inlet opening (width x height): 1,250 x 1,000 mm Net weight: approx. 60 t. Drive power: 160 kW Grease lubrication pump: yes SPECIFIC COMMENT - Incl. inlet box - Incl. complete set of crushing jaws - Incl. printing plates and spare parts - Eccentric swingarm torn, spare swingarm available - Ideal for crushing hard rock

SPECIFICATIONS: Hopper opening: 1300 x 600 mm Installed power: 15 kW Rotor: Ø 250 mm Rotor width: 600 mm 014 Knife Screen: 16 mm EQUIPMENT: Replacement Knife

Find more here - / Contact us at -

Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - / Contact us at -

Manufacturer: SEBA Model: Lite Track 70-40 New Evolution Year of Manufacture: 2022 Operating hours : 45 h Technical Specifications - Operating weight: 12,000 kg - Transport length: 5,300 mm - Working length: 8,630 mm - Width: 2,420 mm - Height: 2,750 mm - Engine: Yanmar diesel, 53.7 kW / 850-2,000 rpm - Travel speed: 0.7 - 1.3 km/h - Maximum gradient: 30% - Conveyor belt speed: 1.85 m/sec - Hopper capacity: 2.5 cubic metres - Output capacity: 10 - 45 cubic metres per hour - Jaw opening: 700 x 400 mm - Hydraulic jaw gap adjustment: 15 - 100 mm Standard Equipment and Features - Vibrating feeder with pre-screening grizzly - Reversible discharge conveyor for pre-screened material - Remote control for all machine movements, including 2 battery packs - Level sensor at crusher inlet - Magnetic separation belt - Anti-dust system - Lighting for night operation - Video camera monitoring at  ...

Technical Parameters - Impact Chamber Diameter: 1,200 mm (48") - Number of Screens: 8 units / Design in HARDOX 400 - Rotor Equipment: 1 – 3 pairs of acceleration elements (Hardox 450) - Rotor Speed: 1,000 – 1,400 rpm - Inlet Opening (WxL): Approx. 800 x 400 mm - Drive Type: Power belt (Kraftriemen) --------------------------------------------------------------- Electrical Specifications Standard Drive (75 kW @ 1,500 rpm) - Voltage: 400V / 500V - Rated Motor Current: 134 A (at 400V) / 107 A (at 500V) - Fuse Protection: 160 A (at 400V) / 125 A (at 500V) Optional Drive (with 90 kW Frequency Converter) - Voltage: 400V / 500V - Rated Motor Current: 161 A (at 400V) / 129 A (at 500V) - Fuse Protection: 200 A (at 400V) / 160 A (at 500V) Find more here - / Contact us at -

Manufacturer: Kleemann Model: Mobicat MC 102 RH Year of Manufacture: 1999 Machine Type : Mobile Jaw Crusher Operating Hours : Approx. 17,000 hours (counter defective) The Mobicat MC 102 RH is one of the most widely used mobile crushing units in the Kleemann range, valued for its reliability, high throughput capacity, and ease of operation on quarry, recycling, and demolition sites. Find more here - / Contact us at -

Lokotrack LT140 Year of manufacture 1996 Crusher inlet 1400 x 1070 mm Converted to electric drive 200kW Machine in operational condition from a limestone quarry/cement plant 115 tons 4 Transports

Jaw Crushers Manufacturer: Retsch Type BB 100