crusher used for sale

The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liqui ...

ID3500 Crushing plant for the production of frost protection Crushing plant for the production of frost protection Crushing plant for the production of frost protection consisting of: 1) Humboldt - double knee crusher Type: BDG 900 x 700 Jaw width 900 x 700 2) Pfister vehicle scale type TAW 30 Maximum load: 30 tons Bridge size: 8 x 2.5 m Standard printing unit as a recording device 3) Steel sheet silo for individual installation 4 supports made of IP beams Total height 8 m, clearance height 3 m Outlet 600 mm, silo closure as a flat slide with rack adjustment and handwheel operation. An electric vibrator was subsequently attached to the outlet. 4) SBM impact grinding mill type PMM 10/6/4 export 5) Push-cart feeder type SW 1000 x 4000 with inlet hopper for the crusher 6) Existing conveyor belts 7) Screening system Parts lists and purchase invoices are available for mo ...

Jaw Crusher System for Sale Manufacturer: 3-B-Systeme Year of Manufacture: 1992 Operating Hours: 2,144 h The system consists of the following components: - . (Pos.1) 1 piece Müller jaw crusher, Rottweil, 800x500 mm inlet opening .Jaws approx. 70-80%, upper part new. - (Pos.2) 1 piece of steel construction from 3-B-Systems with pre-screening and bunker attachment - (Pos.3) 1 piece crushed material discharge belt - (Pos.4) 1 piece overband magnet - ( Pos.5) 1 piece 200 kVa power generator, soundproofed Find more here - / Contact us at -

Find more here - / Contact us at -

Find more here - / Contact us at -

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of drum ...

Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - /

Year of manufacture: 2021, • Betriebsstunden: 3.200 h, • Weight: approx. 37.5 tonnes incl. post-screen unit, • Engine: Cummins L9 – Stage V, • Post-screen unit: 1-deck incl. oversize return conveyor, • Wind sifter for oversize material, • Radio remote control, • Hopper extensions (8 m³), foldable, • Overband magnet, hydraulically liftable and lowerable, • Water pump for dust suppression incl. spray system, • Staubunterdrückung am Ablassband – Feinstaub, • SBM remote service CRUSH CONTROL including GPS

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Used jaw crusher Makrum company, type 40.17 Specifications:   1.Wielko inlet -800x1000 mm.   2. The adjustment range of the gap outlet - 80/18 mm.   3. Max. the size of the input material - 750 mm.   4. Performance - 35-90 m3 / h   5. The power of 75 kW drive motor.   6. The weight of the largest unit 14 T.   7. Weight crusher 38.1 T. Jaw crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, quartz, glass cullet, limestone, sandstone, cement clinker, etc. These materials may not have a clay-loam dirt more than 5%, and humidity more than 10%. Wide range of sizes crushers and their technical parameters allow you to apply them in different nodes crushing - from the initial node crushing until the final product.

Jaw Crusher Baioni BS 105 incl. spare parts (without JAWS) Only 900 hours of operation since replacing bearings Total1960 hours of operation Masch for normal stone. No. 1917 Year 2009 intake opening 1050 x 340 mm Minimum gap width 30 mm Maximum gap width 77 mm 55 kW Weight approx. 9'900 kg V-belt protection The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

used MoCo shredder main machine with gearbox and motor 7,5 kw

The BTS-Glass Bottle Crusher is ideal for crushing empty glass bottles and glasses in catering business and other bottling companies. It is also used in factories with glass waste issues. You can crush up to 100 glass beer bottles per minute. The glass bottle crusher impresses with its ease of use, safe operation and the spacious filling chamber. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Machine size: 1850 H x 965 W x 832 D mm Machine weight: 315 kg Transport height: 1850 mm Volume reduction: up to 80 % Loading aperture: 481 W x 337 H mm Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) User-friendly, safe and easy to operate Reduces the frequency of daily/weekly glass waste collections Suita ...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

Crusher and shredder for broken asphalt; Motor 75 kW with hydraulic feeder in the hopper. Milling shaft. Power 75 t/h For granulating asphalt break-up. Up to 1200 x 400 mm. Granules depending on the built-in screen size.

High-performance fine cone crusher Calibrator 1600/300 H III

TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...

Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

ID3344 Double roller crusher year/Baujahr 2015 230 t Double roller crusher including conveyor belt 1600 mm x 12.2 m, including 2x discharge belt (Mobcon) 1400 mm x 40 m, including transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, content approx. 30 cbm, apron conveyor with crawler chain, apron conveyor width 1800 mm, apron conveyor length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, including electrical equipment and control Double roll crusher incl. conveyor belt 1600 mm x 12.2 m, incl. 2x discharge belt (Mobcon) 1400 mm x 40 m, incl. transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, capacity approx. 30 cbm, apron conveyor with crawler track, plate belt width 1800 mm, plate belt length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, incl. electrical equipment and control system

TECHNICAL SPECIFICATIONS Manufacturer: LOKOMO Description: Semi-Mobile Crushing Plant Type: Stationary Year of construction (complete complex): 2009 Crusher Type: C 100, Single Swing Jaw Crusher Inlet opening: 1,000 x 800 mm Throughput: 150 - 200 t/h Maximum feed size: 600 mm Drive power: 132 kW Broken product: 0 - 120 mm Adjustable gap width: minimum 100 mm Feed hopper capacity: 25 t Drive power vibratory feeder: 18 kW Discharge belt: 12,000 mm length, 1,000 mm width Drive power discharge belt: 22 kW SPECIFIC COMMENT - Complete system - Designed and refurbished in 2009 (no use yet) - Numerous spare and wear parts included - Incl. hydraulic hammer type RAMMER S 25

ORDER NO. 7089 TECHNICAL SPECIFICATIONS - loading hopper inlet 1020x1230mm - rotor working width 1020mm - rotor diameter 348mm - main motor 22kW, 400V, 50Hz - pump motor 0,75kW - number of knives 50pcs - knife size 35x35x20mm - sieve 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – autorewers – for WEIMA WL 10 – German production – pressure drawer – very good condition – used chipper, DTR+CE documentation

Crusher type RS 650

SPECIFICATIONS: Hopper size mm: 1600 x 1400 Rotor length mm: 1400 Installed capacity KW: 37.0 Capacity per hour: 700/1000 Kg Screen diameter mm: 16 Hydraulic operation Application Refiner

Grinder Mill with Blades for Sale Brand: Prat Cutting Chamber: 500x320 mm Closed Rotor Without: Motor, Electrical Panel and Hopper For more details or to make an enquiry, please contact us.

Cone Dia.: 800 mm - With Electrical motor

Inlet size: 400 x 250 mm - With electrical motor

SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover

Manufacturer: SBM Model: V10H Total Year of Manufacture: 1994 Weight : approx. 9,000 kg with 200 kW engine Type of Machine: Vertical Crusher Find more here - / Contact us at -

Used for test only Auction-ID: A1-43892-82

-Hydraulic lines -Brand and type unknown -No documents Auction-ID: A3-43499-72

ID3355 Grit Plant/Split Plant year/Year of construction 2002 Grit plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16 Split plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16

We offer here the completely overhauled engine replacement CAT C13,Engine number:KWJ04492,Arr:366-0290 complete with starter, alternator + EGR cooler. If you are interested, please contact: MIW GmbH Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281 950583 Mail: infoatmiw-zeven

2 x Lindner Limator 1200 90 kW Year of Manufacture: 2013 6000 hrs Fully refurbished Find more here - / Contact us at -

Rubbel master RM 100 stone crusher, built 2010, overhauled this year, new radiator, regular serviced motor and newly repainted shell. Available immediately. Grid unit OS 100 from 2011. Ca. 7,524 working hours. Test and presentation possible can also organise transport inside EU with our own trailors. More photos on request.

ID3508 Svedala H45 Cone crusher Cone crusher

Max Capacity:440 Tph Head dimeter 1120 mm Power 200 kw

Single-swing jaw crusher with an internal width of 500 mm x 350 mm. The lower gap is adjustable from approx. 30 to 80 mm. Throughput (depending on the selected gap width and the material to be crushed): Between 9 and 30 tons/h. The crusher ran smoothly until the removal and the scope of delivery includes 2 suitable, unused crushing jaws. Additional spare parts / wear parts are available for an extra charge.

Twin-shaft crusher / lump crusher for crushing and loosening lumpy material. Drive via Bauer geared motor with 5.5 kW and friction clutch. Infeed dimension: 1,000 mm x 280 mm.

Shredder LINI LW 40 -used-hydraulic feed, PLC control---------- Technical data ----------hopper opening: 600 x 820 mm, tricher capacity: 0.5 m³, rotor diameter: 200/250 mm, rotor length: 600 mm, motor power: 18.5 kW, weight: 1050 kg, dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, sieve holes: 15 mm

TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Double Toggle Jaw Crusher Type: KS 1250/1000/04 Year of Make: 1997 Inlet opening (width x height): 1,250 x 1,000 mm Net weight: approx. 60 t. Drive power: 160 kW Grease lubrication pump: yes SPECIFIC COMMENT - Incl. inlet box - Incl. complete set of crushing jaws - Incl. printing plates and spare parts - Eccentric swingarm torn, spare swingarm available - Ideal for crushing hard rock

A roller crusher BMD machine and a gyratory crusher Fried. Krupp (Thyssen-Krupp) are available. 1) Roll crusher BMD machine BHS Walzwerk V1-800, year of construction: 1967, general overhaul: 1981, power requirement: 30kW. 2) Gyratory crusher Friedrich Krupp Gyradisc fine crusher. On-site inspection is possible.

Stock number: D356, Ice crusher, stainless steel,, ALA, hydraulic working., Inlet funnel in the top., L 1100 x W 600 mm crushing house., Material: Stainless steel AISI 304

Designed for the artisanal milling of olives. Composed of 3 granite stones with a diameter of 1200, 1250 and 1300mm respectively. Back built in pink granite and stainless steel tank. This mill is ideal for oil mills looking for a traditional milling as the granite stones allow a smooth and uniform crushing of the olives while preserving their organoleptic properties. Also on sale: olive paste mixer, stainless steel reception hopper, conveyor belt and more auxiliary equipment for oil mill. Contact us for more information.

ID3642 Nordberg G11 Fine year/Baujahr 2000 Cone crusher, 160 KW electric motor, with spare cone and casing, with inlet trough Cone crusher, 160 KW electric motor, with spare cone and jacket, with inlet tank

Rotor Dia. x W: 1.300 x 1.300mm. - Inlet: 1.360 x 1.000mm. - With 160KW E.Motor and Control-cabinet with soft-starter - New spare-parts in stock.