crown cap used for sale

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Furnace unloader for continuous furnace, Fabr. Capelleveen

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR SALE Item #: Usm-179 Category Cap Applicator One Used Tetra Pak Cap Applicator 30 Flex For Sale: Flexible cap applicator for portion and family packages of aseptic brick pack product Output: 6600 - 9000 packages per hour Package volume: 200 - 2000 milliliters Package types: Tetra Gemina® Aseptic, Tetra Brik® Aseptic, Tetra Prisma® Aseptic (different package types and sizes may require OEM change parts) Allen-Bradley Logix5561 controls Nordson hot melt glue unit Stainless steel construction Touch screen HMI Servo driven Electrical Information 400/230 Voltage 3 Phase 60 Hertz

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Used bottling line by Pack-Trend, new 2020. Machine type: Dispensing, capping, labelling machine Weight: 675kg Type of medium: liquid, gel, cream. Material stainless steel AISI304 Machine capacity: up to 900 cycles/hour Packing portion: 0,1-0,5 L Machine dimensions working: Height H - 1600mm Width B - 1500mm Length L - 3000mm. Electrical supply: 230V/50Hz Pneumatic Supply: 6-8 bar Power consumption: 1500W Accessories: ROTARY RECEIVING TABLE ROTARY INFEED TABLE Certification: CE Technical and Operational Documentation.

Fuji Capsula XL II CR System incl. PC / Monitor / Keyboard / CD / manuals tested from technican #Welcome to inspect & test # EXW Germany

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

Key data: 4200 kN

Machine in production !1

USED TETRA PAK CAP APPLICATOR 45 Item #: Usm-191 Category Cap Applicator USED TCAP 45 for 1000ml Prisma Packs is available for sale. Year of manufacturing 2005 and working hours 10532 Condition: Good

tool clamping area: - mm Shipping weight: 22 kg Packing: ? mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC twin table SLOT MORTISER machine model BALESTRINI 2CAP second hand machine max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.13 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9000 net weigth kgs. 600 volt. 380/50

Output infinitely adjustable up to 7000 bottles/hour. Number of screw heads 8 pcs. Installed power 1.68 kW Supply voltage 220/380 V; 60 Hz Compressed air requirement 0.3 m 3 Compressed air operating pressure max. 0.6 MPa Overall dimensions (length x width x height) 1450x950x2800 mm Weight 600 kg

Manufacturer: Unimac-Gherri Series: Tappatore Mod. Cap. 4-Plastic Year: 2010 Capacity: 10,000 b/hr Formats:current 850ml Specifications: - Voltage 400 V - Frequency 50/60 Hz - Nominal power: 4 kW

Fully automatic capsule filling machine for powder or pellets in capsules of size 000 - 5. Along with the main machine, various additional modules and machine enable a fully automatic filling process. Included: material hopper, capsule hopper, vacuum feeder, capsule feeder, industrial dust collector, capsule polisher, metal detector, collecting hopper (final product). ? Specifications: suitable for capsule size: 000 - 5 | segment bores: 25 | max. speed of the machine in neutral: 140 cycles/minute (corresponding up to 3500 capsules/minute) | main machine dimensions: L1555xW1165xH2040 mm | main machine weight: 2200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks ...

Manufacturer: Sebia Model: Capillarys 3 Tara CAPILLARYS 3 TERA delivers the enhanced performance of a 12-capillary system and can be upgraded to an MC configuration by adding 1 to 3 CAPILLARYS 3 TERA units to a tube loader (528 positions). It offers a broad range of techniques for myeloma, diabetes, hemoglobinopathies, and chronic alcohol abuse. Find more here - / Contact us at -

Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler | Filling machine with 4 filling heads for liquids with high or low viscosity | Lid closing machine for different sizes and shapes of lids including lid unscrambler | Labelling machine for bottles/cans/containers made of glass or plastic | Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4 | filling range: 100-1000ml | dosing method: by piston pump | accuracy: +/- 1% | bottle height: 15-400mm | bottle diameter: 25-200mm | speed: max. 1000 bottles/hour | label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weig ...

LABELshrink tunnel. Basic version with conveyor for smoothly shrinked labels on caps only. For bottles/cans/glasses without any corrugation. Two blowing motors for low and turbo air blowing. - Specificationen: max. product size: ? 120xH400mm | tunnel size: L1000xW150xH400mm | machine dimensions: L1530xW400xH1300mm | output: up to 200 bottles/min | power: 380V, 9.0kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

The TRE PAK DIM Cap Applicator is a specialized piece of equipment used in the packaging industry for applying caps to various types of containers. Here are some of its key functions and features:, - Automated Cap Application: The DIM Cap Applicator automates the capping process, ensuring that caps are applied quickly and uniformly across a production line. This reduces labor costs and increases efficiency., - Versatility: This machine can handle a variety of cap styles and container shapes, making it suitable for different product lines in food, beverage, pharmaceutical, and cosmetic industries., - Precision Control: The applicator is designed to apply caps with accurate torque settings, which ensures that caps are not over-tightened (which can lead to damage) or under-tightened (which can result in leaks)., - Integration Capability: The DIM Cap Applicator can be seamlessly integrated i ...

Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this forma ...

Rating: 400kW Electrical Efficiency LHV: 33% Combined Heat And Power Efficiency: Up to 90% Voltage: 400-480 VAC Frequency: 50/60 Hz Electrical Service: 3-Phase, 4-Wire Wye Shutdowns at the end of October 2023, one of which has been shut down since January 2023. We put them into operation at the end of November 2020. The sale includes a container for 3 turbines (2 installed), heat recovery units (550 kW), exchangers for low and high pressure condensate removal, Mattei gas compressors (6.5 bars) in a container, a gas cooler, a gas blower, and a turbine inlet gas filter.

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

General SKU300U1003 LocationBarneveld MakeCI Electronics Type195/36 Sade P2 No.TP595 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Floorspace0,80x0,65 m CEcheck Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU330W1528 LocationBarneveld MakeSeidenader TypeV50-2 Mach.No.1012/95 Main Features MaterialStainless steel Motor0.6 KW Specified Features - Miscellaneous Motor0,6 kW, 230 volt Information Year of construction1995 Total height1,35 m CEcheck Floor space1,60x0,70 m Weight180 kg Extra SpecificationsWith hopper, Jost vibration unit, type JD3, output roll conveyor,  : MiscellaneousSeidenaderMiscellaneous > MiscellaneousBrand > Seidenader What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU422W1590 LocationBarneveld MakeEngineering Systems TypeTabcap 5 No.9292 Year of construction1992 Main Features MaterialStainless steel Inlet diameter0.5 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity220 volt Information Mounted on wheelscheck With switchgearcheck Total height1,35 m Weight220 kg Floorspace1,0x0,70 m Extra SpecificationsWith RNA vibration funnel, type SRC-N, : X, Y travel table, tablet frames and tooling Miscellaneous transportTabcapConveying systems > Miscellaneous transportBrand > Tabcap What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Used, in very good condition Packaging type : Tetra Prisma Aseptic Package volume : 1000,00 ml Shape of packaging : Squareline

Packaging type Tetra Prisma Aseptic Shape of packaging Squareline Packaging volume 1000,00 ml Voltage 3N 400/230 V Frequency 50 Hz

7 pcs Index VD30 mounts with capto interface, 3 pcs driven by it, mint condition!

Approx. 100 pcs Capto C4 adapter, see photos

The Automatic Liquid Filling and Capping Machine by YQ MACHINERY CO LIMITED offers an inline solution for efficient packaging. Designed for easy operation and reliability, this machine is perfect for businesses in the material handling and packing industries, ensuring accurate filling and capping of liquid products. Where It’s Used: Beverage industry (bottled water, soda) Pharmaceuticals (medicine bottles) CBD/hemp oil bottling Cosmetics (shampoo, lotion bottles) Vape e-liquid production

This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine.

This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine.

Manufacturer:Sebia Model: Capillarys 3 OCTA Year of Manufacture: 2020 ELECTRICAL DATA Voltage: 100–240 V Frequency: 50/60 Hz Power Consumption: 350 VA Find more here - / Contact us at -

This HILALSAN Advanced Cap 3320 was manufactured in 2019. It features a pressing force of 320 tons, a bending length of 3100 mm, and a stroke of 365 mm. With a throat depth of 510 mm and a main motor power of 30 kW, its ideal for heavy-duty press brake tasks. Only 351 operating hours. Contact us for more information.

Erlab Captair Filtair 936 Filter Extractor Erlab's exhaust-free, filtering chemical extractors offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless benefits that provides end-to-end protection throughout the lab and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance criteria of the fume hood and ensures your safety at all times. Pros Complete user protection Filtration safety : All models of captair filtair filter extractor comply with the AFNOR NFX 15-21 1 Class II standard. Pollutant retention capacity of chemical vapours in the working area, guaranteed by controlling the air velocity on the façade and complying with pollutant retention standards (XPX 15203, BS 7258, DIN 12927) Sampling valve for the expelled air allows the user to control the filter ...

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm

This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine.

Used Used filling monoblock Fill?n Cap: Year: 2018 Condition: Good Used Filling Monoblock FILL?N CAP Year: 2018 Speed: 4.000 Bph Model: RST. 30-2-2 Direction: American Linear Blower Type of filling: volumetric Number of filling valves: 2 dosages from 20 to 100 g 2 valves for filling from 5 to 20 ml Product tank Capacity: 25L Heater Stirrer Oil Tank Capacity: 5L Capper Number of heads: 2 Type of cap: Screw Plastic Safety protections Code: QT 638 More details: https://bottlingscout.com

Used Used monoblock capper | wirehooder Bertolaso: Year: 2017 Condition: Good Monoblock Capper | Wirehooder BERTOLASO Year: 2017 Speed: 18.000 BPH Direction: Clockwise Capper 16 heads | Delta 816S Mushroom Cork Wirehooder | Minerva 200 20 Heads Long autonomy distributor cages Caps Elevator Safety protections Code: HJ 69 More details: https://bottlingscout.com

Used Used labeller Capsuler GAI 6030: Year: 2004 Condition: Good Year: 2004 Speed: 2.500 bph Direction: Clockwise Model: 6030 Nr. 3 adhesive stations Suitable for pvc and polylaminate capsules Formats: 0.75 lt series xv glass special, 0.75 lt Safety protections Code: EA 454 More details: https://bottlingscout.com

Automatic desiccant cap assembly line (silica gel). Equipped with a dual-lane system and a multi-position rotary carousel, featuring cardboard punching units, volumetric dosing, plastic seal insertion, and quality control by machine vision and dynamic weighing. Year 2012. In good condition.

Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles ...

Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.

Running direction: left - right Frequency-controlled for 26 mm crown corks Also suitable for PET bottles with crown corks

SACMI line for crown corks.

For sale crown corks press SACMI. Type PTC 170 produced 2006 year. Sheets 811,5 x 564,8 mm. Perfect condition.

Overtaken KOLBENSCHMIDT piston crowns

2017 rev Auction-ID: A1-43573-288

Auction-ID: A1-43573-213