crown cap used for sale

Cat.-No. 09-1590-6L new Material: V2A (AISI 304) 1.4301 – Surface inside and outside IIIC upper bottom: Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 lower bottom: With Conical Bottom 45°and rest outlet underneath with forklift and pallet truck content: 1500 l 1100 mm diameter 2250 mm total height Weight 130 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 immersion socket for temperature control Temperature control/digital temperature control/analog All prices are valid Ex-Works, excl.VAT Delivery: from D-97753 Karlstadt-Karlburg Freight Charges: depending on dimensions and destination Subject to prior sale

Stock number: L0931-06 Used Cannon type GCI/450 l/MI approximately 450 l working capacity and 638 l total capacity vertical white glass lined reactor. Internal approximately 902 mm diameter x 665 mm diameter straight side. Has clamped dished top and welded dished bottom heads. internal rated full vacuum / 2.76 bar design pressure at -10 /+ 230 C. Carbon steel jacket 85 l capacity rated 5.17 / 4.17 bar design pressure -10/+230 C. Includes 3-blade retreat curve agitator belt driven by 1.5 kW 415 V, 3/50, 1420 rpm motor via highfield gears size 5 gearbox rated 31/3 reduction ratio and mechanical seal.

Tank container 26,000 L tank and apparatus construction Manufacturer: Tank und Apparatebau Neesen Segler GmbH&Co.KG Built: 1993 Room capacity: 26,000 L Danger Class: AIII Inside rubberized, monitored Condition: good

We have for sale a number of used hydrocyclones from the German manufacturer AKW A+V. Condition: USED Type: RWS 105 Nominal Diameter mm: 50 mm Cut Size dT50,?m: 5-15 Pressure Loss,bar: 1,5 - 3.0 Capacity ,m3/h: 2,4 -7,6 - High pressure resistance, The best operating pressure is much higher than the like products, much easier to reach the better separating effect, good cost performance. - Each type of hydrocyclones has big amount of successful applications, it can ensure that every operating hydrocyclone has the balance feeds. - The involute design from Germany makes the AKW hydrocyclones having better effects of concentration and separation. - Extra long lifetime. - Standardized parts, it is very convenient to change the spare parts.

Cat-Nr. 12-1065 in a very good condition Capacity: 10 bar Original Price: Euro 3000,- Measurements and Weight: LxWxH: 84 x 32 x 100 cm Weight: 27 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

Cat.-Nr. 12-1090 in a very good condition Capacity: 4000 litres/h Year of Construction: 1981 Masch-Nr. 21628 Original Price: Euro 6000,- Measurements and Weight: LxWxH: 126 x 40 x 109 cm Weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

We have for sale a Vacuum Evaporation Plant: The plant consists of: -3-stage vacuum evaporation system VV 75 KDB -Down-flow evaporator Condest 13 K-Niro Technical details available upon request. Vacuum evaporation is a process that has been used by the large-scale chemical industry for decades. Using vacuum evaporation systems allowed (for the first time) utilizing the advantages of this process also in small and medium-scale applications. Vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection. It is used to treat under vacuum aqueous solutions that contain pollutants. Typical fields of application include: - Recover electrolytes from electroplating - Keeping a uniform rinsing water quality in static rinsing tanks - Volume reduction of sewage wate ...

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

Cat-Nr. 12-1040 in a very good condition Capacity: 12.000 litres/h Motor capacity: 4 kW New Price: 5000€ Multistage (3 Stages) Measurements and Weight: LxWxH: 124 x 38 x 112 cm Weight: 154 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Function: The Bosch TFA 241 is a thermoforming machine fills liquid products in previously defined Cup sizes. First, the railway film with H2O2 is sterilized and then heated to a predetermined temperature. This temperature is reached, the slide in the next step will be deep. After the cups got their form, these are filled with product. Then, the upper rail slide with H2O2 is sterilized. Then, the filled Cup with the top track slide are welded and punched out before they are passed on a conveyor belt of the drain. Performance: 13,500 - 31,500 cups per hour Number of runs: 5-track and longitudinal runners current format: Ø 44 mm, height 15 mm maximum Cup size: Ø 44 mm height 29 mm Prefiller: Cleaning: CIP capable Mainfiller: -for liquid products -Manufacturer: Orlita -Dosing type: cold HD -Filling volume: 8-15 cm3 Disinfection: H2O2 Date of printing: Inkjet Dimens ...

Cat. No. 12-1110 in a very good condition Capacity: 4000 litres/h Pressure: 10 bar Rotating speed: 1425 U/min Original Price: 3000€ Measurements and Weight: LxWxH: 82 x 38 x 105 cm Weight: 63 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Power 5, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 25 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roll diameter 800 mm - weight of the machine approx. 2500 kg - noise level < 80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand Guard - color machine/Cabinet - RAL 7035 (light grey) guard - RAL 1028 (melon yellow) machine immediately available Price and further details on request

Cat. No. 12-1135 in very good condition Measurements and Weight: HxLxW: 200 x 55 x 107 cm Weight: 135 kg Year of Construction: 1979 Temp: 18-40°C Motor capacity: 2,66 kW Rotating speed: 120 – 340 U/min. Pressure: 4-6 bar 3 kW 130 l/min., 7800 l/h 16,5 bar DN 100 DN 80 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Capacitive Rod electrode type 23.02 ex with WHG approval Manufacturer: Vega Grießhaber KG Type: 23.02 ex Overfill protection by means of a vibrating level switch as a swing fork sensor in compact design with threaded connection, pipe extension, as well as one in the Sensor housing built-in two-wire electronics. The probe is a general-purpose vibrating level switch for all liquids. Regardless of the mounting position she detects the level of border safe and perfectly. The instrument can be full or empty message, as approved overfill or dry running pump protection be used in containers. The position of the switching point is set via the tube extension. The probe offers highest reliability and security in a wide range of applications. New price: approx. 900

Cat-Nr. 12-2260 new Sugar Dissolving Tank with Cooling and Heating Jacket, with Insulation - 50.492 Litres in AISI 304 Product Thickness: 1,4 kg / Ltr – 65°C Working Pressure: pressureless Capacity: 50.492 Litres Material: V2A - AISI 304 Surface: 2B welding inside polished Insulation: in mineral wool thickness = 50 mm, completely in stainless steel and welded Thermoplate/Cooling Jacket H=5500 mm Thickness: 2.0 mm Working Pressure (Thermoplate/Cooling Jacket): max. + 3.0 bar – Medium: Water Upper and Lower Bottom: conical shape With manhole lid Diameter: 500 mm With inlet and outlet air controll With level indicator with borosilicate, scale With sample valve With spray head diameter 65 mm demountable with CIP pipe till the bottom of the cylinder + thread connector NW 80 With butterfly valve DN 65 for clear outlet With butterfly valve DN 65 for waste ou ...

For the semi-automatic filling and dispensing of liquid products. Suitable for products such as milk, juices, oils, spirits, detergents, liquid toiletries etc. in cups, bottles, canisters, cans or similar containers. The container to be filled will be placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Vollpneumatische version without electronics. The fill pulse is triggered via a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing systems. Capacity: 600-1.800 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1 Volume ranges depending on the model type: Type: fill: D-L1-60 10 - 60 ml D L1-250 25-250 ml D-L1-500 100-500 ml ...

Year: 1989 Type: Monoblok VKVCF 72/12 Bottle type: 0,5l glass Efficiency: 28500 b/h Operation mode: pressure Technical data: -72 filling valves -12 crowning heads -double evacuation -vaccum pump

Tetra Pak (opt.WRAP AROUND) Tray Packer TCBP 70, year 2000.The TCBP 70 Packer is available as Multi-Infeed , MED, in various Volumes available at our warehouse. Nominal capacity 7000 p/h

The canister-filler "D-K2-5000" is a pneumatic driven semi-automatic unit. The product to be filled will be aspirated through a tube and filled with a volume piston into the positioned canister. The positioning of the canister under the filling head happens manually. The filling range is max. 5,000 ml. With different programm settings bigger canister can be filled also (e.g. 30 Liter canister). - Capacity: 300 cans/h (depends on product, filling volume, packaging, etc.) - semi-automatic version, movable on wheels volume dosing of liquid and slightly pasty products - Volumetric filling quantity - Pneumatic electric system - The filling process is started by a foot switch - All wetted parts made of stainless steel and food-approved plastics (product-specific changes possible on request) - Dimensions: approx. 1,200 x 1,200 x 1,600 mm Optional: - Multiple sizes shoul ...

Capacity/h: 7500 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 19 200 Base Line consists of: Tetra Pak TBA 19 250 Slim Line, Straw Applicator TSA Tubex 9001. Options: Packer, Conveyors,... To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Capacity/h: 7500 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 19 200 Slim Line consists of: Tetra Pak TBA 19 250 Slim Line, Straw Applicator TSA Tubex 9001. Options: Packer, Conveyors,... To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers. Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2  ...

Power: 150 kVA / kW 120 Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-282 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: approx. 450 litres Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24 V / 2 x 143 Ah Generator switch: Yes Accessories: Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm Weight: approx. 8000kg

Input Board PC 1 NE 80 (Grundig 9.44904-1706 FD-Nr. 6006 04 100643) Exchange 520,-€ + Mwst Without Exchange 620,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Tetra Pak (opt.WRAP AROUND) Tray Packer TCBP 70. Adjustable to many package and tray sizes. Nominal capacity 7000 p/h

MFL-VORTEX, opening: approx. 1,030 x 720 mm, rotor diameter x rotor width: 1,000 x 1,000 mm, feed size: approx. up to 400 mm , capacity: - 110 cbm/h, weight: approx. 13 t.

CAP.: 25 CARTONS/MIN., 300-395 x 227-300 x 250-273 MM - L x W x H, 8 KW

PSU Board NSV 56 (Grundig 44206-860.02) (Sparepart for NSV 52, NSV 54, NSV 55, NSV 56) inkl. 1 Year Warranty Exchangeprice 595,-€ with Exchange 695,-€ Dialog 1attached NSV 52 ( Grundig Nr. 9.44904-1703 FD-Nr. 6006 04 100657) Dialog 2 attached NSV 54 ( Grundig Nr. 9.44904-1203 FD-Nr. 6006 04 100678) Dialog 3 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Dialog 4 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Contour 1 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 2 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 3 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitor ...

Bosch PSU for Amplifier TR 10, TR 15, TR 20, TR 25 ( 038035 ) inkl. 1 Jahr Garantie Exchangeprice 740,-€ without Exchange 875,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Cat. No. 07-1255 in a very good condition Capacity: 1250 litres/hour Pressure: 4 bar Motor: 4, 8 A Measurements: Length: 105 cm Width: 40 cm Height: 70 cm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Cat. No. 12-2945 New Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: stable stack crown Manhole lid DN 400 6 x Star Head Eye Screws 1 x Threaded welding nozzle DN 50 with blind cap 1 x Overpressure valve 1 x CO2 ventilation valve Body: 4 x Beading stiffeners Underbody: forward pulled outlet pipe DN 50 Cone floor 4 feet, very stable design with pallet truck underpassable with forklift shoes for fork holder Supplement (on request): Fermentation spandconnection DN Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. Weight 85 kg Height 1410 mm Diameter 700 mm Cylinder height 750 mm Material AISI304 (V2A) 1.4301 Test pressure 3.4 bar Construction form vertical Working pressure range +2/-0.15 b ...

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Carrier Turbo Cold Water Kit, 19XR5251467, Y.O.M. 2800KW cooling capacity, from 20%-100% adjustable, latest model, very efficient, very good condition, ready to use immediately.

Centrifuge ELLER work standing on 3 feet : Manufacturer eller Type: 734 C. Serial No.: 78-043 Year of construction: 1978 Drum diameter: 800 mm Speed: 1,500 rpm Capacity: 120 kg The eller centrifuge is a filter centrifuge for pharmaceuticals, fine chemicals and chemistry industry, at the solid liquid separation happens mechanically. The typical process includes filling, washing of the cake, spin and unloading. A possible criterion is the way the solids are discharged. This determines the respective execution. In very good condition!

Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.

Type: SNZP 380.1 HX1P11 Year of construction: 1998 No. 7610158 Q = 30/167 l / min N = 60/220 l / min Drive North in EEx II Capacity: 3.3 kW, 400V Drive North N1-n2 = 33-258 min-1 Type: SK 33-R1960-112 M / 4 ED Dimensions: LWH = 2300x420x500mm Weight: 250 kg

PSU PC 2 NSV 90 (Grundig 9.44904-906 FD-Nr. 6006 04 100664) Exchangeprice 430,-€ with Exchange 530,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Cat. No. 13-0033 in a very good condition Typ: RF32DT71D4 Testing water by 22°C back pressure at 1 bar Pressure: 0,3 bar capacity: 5.100 litres/h Motor: 0,37 kW Connection: DN 40 - can be changed on request for an additional charge Measurements: with frame: pump: length: 33 cm 45 cm width: 20 cm 23 cm height: 84 cm 50 cm weight: 56 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 13-0044 in a very good condition Typ: BN 3101 131 424 Testing water by 22°C back pressure at 1 bar Pressure: 1,1 bar capacity: 10.800 litres/h Motor: 1,8 kW Connection: inlet/outlet: DN 65 according to DIN 32676 can be changed on request for an additional charge Measurements: length: 96 cm width: 33 cm height: 100 cm weight: 84 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

PSU PC 1 NSV 80 (Grundig 9.44904-1705 FD-Nr. 6006 04 100640) Exchangeprice 500,-€ with Exchange 600,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

1 of used wrap-around /traypacker, make ZVT (KHS), type Innopack WP 030 VH. New 2000. Operating side; left. Capacity upto 30 cartons/trays per minute (depending on product and blank dimensions). Siemens S7 PLC with OP 17, Indramat Servos, Nordson hot-melt unit. Wired for 400V / 50 Hz. Used for packing various 330 ml upto 2.000 ml glass and PET bottles as 8/12/20/24 on tray or in full wrap-around cartons. Last used as tray-packer only. Various manuals available. Condition: good. Dismantled and available cleaned ex-warehouse The Netherlands.

CPU PC 1 NPP 80 (Grundig 9.44904-1903 FD-Nr. 6006 04 100641) Exchange 710,-€ + Mwst without Exchange 810,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

1 of used shrinkpacker (sleever with shrinktunnel), make KHS Kisters, type SP 035 V Basic, new 2003. Operating direction: left. Capacity upto 35 cycles/minute (in overspeed). Metering-belt type infeed. For over-wrapping & shrinking pre-packed trays. Last used for various collations of glass / PET bottles (330 - 2.000 ml) on tray. Suitable for print-registered film. With Siemens S7 PLC and Simatic OP, Indramat drives. Wired for 400 V / 50 Hz. Various manuals available. Condition: good. Available ex-warehouse The Netherlands.

Input Board PC 2 NE 90 (Grundig 9.44904-1708 FD-Nr. 6006 04 100662) Exchange 400,-€ + Mwst without Exchange 500,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

KHS-KISTERS Handle aplication Year: 2005 No. of case conveyor belt: 2pcs. Packaging capacity max.: 140pack/min Case dimensions: Min. package length: 65mm Max. package length: 350mm Min. package width: 65mm Max. package width: 400mm Height min.: 100mm Height max.: 360mm

Cut fat capacity 200 L

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

AUTOMATIC TENONER machine BALESTRINI 2/TAO AUTOMATIC MORTISER machine BALESTRINI 2/CAP recondition machines volt. 380/50 NOT SEPARATE SALE