cross used for sale

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW

shuttleworth conveyor

Item number 67379-0101 Transformer cross seam welding for Tetra Pak TBA 8 aseptic filling machine

Unused in box. Auction-ID: A1-41277-76

Unused in box. Auction-ID: A1-41277-74

Type MJ930 Motor power 3 kW Blade diameter 300 mm Motor spindle 25 mm Max trimming capacity 1000 mm Depth of cut with motor at 45? Depth of cut 90 mm Table size 1150?1020 mm Saw angle 0? +45? -45? Transport dimensions 1500x1100x1450 mm Weight 180 kg

Unused in box. Auction-ID: A1-41277-75

Automatic longitudinal and transverse transport; 400V Auction-ID: A1-44305-30

Auction-ID: A1-44305-36

specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg

Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg

table Ø 550 mm; Equipped with roller conveyor

Working condition

saw cap. Ø 130 mm; table Ø 550 mm

saw blade diameter: 350 x 32 x 2,5 mm 2 speeds: 30/60 UpM vice: 130 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 130x80 mm : 100 mm : 85 mm : 90x80 mm : 75 mm : 75 mm : 90x65 mm total power requirement: 1,1/2,2 kW weight: 220 kg Equipment: - including machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x 32 x 3,4 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 1,5/2,2 kw weight: 280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 225 mm table width: 175 mm x-travel: 120 mm y-travel: 110 mm table height: 140 mm T-slots: 12 mm weight: 17,5 kg dimensions: 0,35 x 0,35 x 0,22 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: SEGA BIANCO MOD. 350 UNDOCUMENTED

HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

5 x rack rows pallet racks, 5.5 m high, each 3 fields (2700), each 3 truss levels - 20 frames / 90 trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 5.50 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (by Glasmek AB Sweden, renovated in 2005) Manufacture: Ashton Industrial Sales LTD / UK Year of manufacture approx. 2000 Professional high-performance glass grinding machine 2x diamond bracelet transverse straps High-speed abrasives and diamond abrasives 400 V , 50 Hz Ball roller tables for easy movement of the glass panes. Table dimensions: L x W x H = 3.85m x 1.20m x 0.9m Weight 600 kg CE marked

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Cross bar assembly, A304003E

Falzmaschine / Folding Machine Heidelberg Stahlfolder KD 78-4-KZ Year 1999 - Serial-No. 103638-258036 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 3 Schwerter links/rechts Auslage / 2. Station 3 knives left/right delivery Stehendbogenauslage / Delivery Stacker Stahl SBP 46 Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Criss-Cross Auslage / Criss-Cross Receiving Tray Horizon SW-12 Year 2006 - Serial-No. 101117 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Saw blade dimensions 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - Cutting range at 90° around 80 mm - flat 95 x 60 mm - Mitre adjustable up to 45 ° - Material vise - Drive 400 V / 0.5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Festo UP cross-section milling machine Clamping length / length milling profile: 200mm 7.5 KW

Cross-flow fan, cross-flow fan, centrifugal fan, centrifugal fan ELEKTROGERÄTE BAD BLANKENBURG QL II type QL 2/1 7020.7/1 2 stages blower motor : 25 W 220 V 50 Hz New !br / Dimensions: 190 x 120 x 150 mm

2017 Andritz KMPT GmbH DCF312 / 16 / 4 Andritz - Dynamic membrane filtration Dynamic Crossflow Filter cpl. with control unit Model: DCF312 / 16 / 4 Manufacturer: Andritz KMPT GmbH Year of manufacture: 2017 Condition: As good as new Description: Crossflow processes are used to separate substances that are difficult to filter. In this process, rotating ceramic discs (alternatively: polymer) generate a turbulent differential velocity. With dynamic crossflow filtration, a high degree of separation can be realised, especially with a concentration of the retentate of up to 700 mPas. Ceramic filter discs are available on the market in a wide range of pore sizes from 7 nm to 2 μm. Areas of application: - Colour extraction (e.g. pigments) - Separation of biomass - e.g. in the extraction of enzymes, proteins, proteins, polysaccharides, antibiotics - Recovery of valuable substances -  ...

heavy 40s Gillardon with cross table

Specifications: - Saw blade dimensions 315 x 2.5 x 32 mm - 2 saw blade spindle speeds approx. 40 + 80 rpm - Cutting range at 90° around 95 mm - flat 110 x 70 mm - at 45° around 90 mm - flat 85 x 70 mm - Mitre adjustable left + right up to 45 ° - Material vise - Drive 400 V / 0.75 / 1.3 kW - Space requirement approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg

Manufacturer: Düspohl, Type: DTS 350 E, Year: 1997, kW Leistung Stück: 4, Through running hight mm: 125, Working width mm: 330, Feeding speed min-max m/min: 100, Feeding speed continous adjustable: yes, Year :1997

: Josting, : QD1, : 1981, : yes, : 800, : 45, : yes, : yes, : 1200 x 800 x 1600, : 500, : yes,

KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE- marked Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely re ...

Manufacturer: Paul, Year: 1999, Type: Strangsäge, Control: NCK 3 , Program: yes, Cutting depth mm: 19 X 600, Working hight mm: 16-19, Positioning accuracy mm: 0,3, Feeding speed max m/min: 60, kW output saw motor: 5,9, wood lenght max mm: 3000, Saw Blade Diameter mm: 530, Year :1999

Vertongen Tenoning Machine P04 year 1979 S/N 5811 in great condition from a vocational school in Finland Included with tools Automatically adjustable tenoning machine Saw unit, max cutting height 130mm, spindle 30 mm /3000rpm, 400mm diameter saw blade 2 horizontal cutter blocks diam 160mm, spindle diameter 40 mm /4500rpm 2 vertical spindles 40 mm working height 160mm, 4000rpm ( Top + bottom ) 1 vertical spindle 40mm, working height 160mm / 4000rpm all spindles are adjustable in the horizontal and vertical direction Tenoning carrige 1000x280mm Sliding guide 2400mm with manual pressure and fence Power 380V 3-phase 50Hz Extraction needs (dust collector) 2400 m3/h Weight approx.1100 kg technical information under subject for corrections

Manufacturer: Hüllhorst, Year: 1995, Type: Kranzprofilsäge, Control: Ferrocontroll, Cutting depth mm: 250, Working hight mm: 120, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +45-45, Work piece length max mm: 4500, Kw Leistung Sägemotor: ca.4, Loading stations: yes, Waste conveyor: no, Saw Blade Diameter mm: 500, Length to slide in mm: 5000, Drill head vertical controlled: yes, Spindles: 8, Drill head vertical controlled spindles: yes, Collet chuck: yes, Optimisation: yes, Maschine vorführbereit: yes, Year :1995

Manufacturer: Hüllhorst, Year: 1995, Type: HGV, Control: ferro, Cutting depth mm: 50, Working hight mm: 80, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +-60, Work piece length max mm: 4200, Loading stations: yes, Length to slide in mm: 4000, Drill head vertical controlled spindles: 4, Tool exchange places: yes, Collet chuck: yes, Optimisation: 1, Required space L x W x H mm: 6, Compressed air bar: 3000, Maschine mit automatischem Einlegemagazin die Teile werden über eine Spannzange übernommen und der Säge zugeführt, Year :1995

Manufacturer: Paul, Bauyeshr : 1989, Type: 12 MKE, Steuerung : Maxi X 3, Cutting depth mm: 44 - 150, Working hight mm: 19 - 75, Schnittgeschwindigkeit Frequenzgeregelt: yes, Work piece length max mm: 6500, Kw Leistung Sägemotor: 7,5, wood lenght max mm: 3000, Aufgabestationen: yes, Abfallförderband: yes, Saw Blade Diameter mm: 550, Optimisation: yes, Year :1989

Cross transport trolley for rails + scissor lift table with castors Brand: WTT Length 3000mm

table length: 430 mm table width: 240 mm x-travel: 225 mm y-travel: 160 mm table height: 160 mm T-slots: 12 mm weight: 45 kg dimensions: 0,6 x 0,45 x 0,2 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 330 mm table width: 220 mm x-travel: 210 mm y-travel: 125 mm table height: 150 mm T-slots: 12 mm weight: 33 kg dimensions: 0,41 x 0,35 x 0,22 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...