cross flow filter used for sale

SEITZ Cross-Flow Filter MICROflow X05 Features: Length 1500 mm Width 650 mm Total height 1900 mm Weight 150 kg Material V2A Last Use Food

SEITZ Cross Flow Filter MICROflow SX 04 M Features Length 1400 mm Width 670 mm Total height 1820 mm Weight 150 kg Description Permissible. Operating overpressure (bar) 5 Permissible. Operating Temperature (°C) 80 Capacity: approx. 500 - 600 litres/h depending on turbidity content for the filtration of wine, sparkling wine, sparkling wine, base wine, grape must, sweet reserve in the cross-flow process MODULE DATA: Active membrane area: 5.00 m² Permeate connection: Milk pipe thread DN 25 Process connection: Milk pipe thread DN 50 Case Material: Stainless Steel MEMBRANE DATA: Cut-off point: 200 nm nominal (microfiltration) Material: hydrophilic polyethersulfone (PES) Fiber inner diameter: 1.5 mm Fiber structure: asymmetrical OPERATING PARAMETERS: Transmembrane pressure Pr: -1 bar to 1.5 bar pH resistance: pH1 – pH 13 @ 75°C  ...

General SKU281Y433 MakeTMCI Padovan TypeDynamos 5 No.90903761-0/001 Year of construction2017 Year of construction2017 Main Features MaterialStainless steel Specified Features - Miscellaneous filter FilterContinuous Cross Flow Filter Filter surface5 m² MaterialStainless steel 1.4401 (316) General LocationBarneveld Floor space3,20 x 0,70 m Total height2,10 m Weight1100 kg CEcheck Extra SpecificationsContinuous High solids cross flow filter, Pressure 1,6 bar, tank volume 50 l.,&:nbsp:Motor 2,2 kW, 380 V, 1445 rpm,&:nbsp:With:lobe pump, 2,2 kW, 400 V, 1445 rpm,centrifugal pump, 0,37 kW, 230/400 V, 30-80 l/min,&:nbsp:input product DN 50, &:nbsp:output DN 50 with pneumatic valvewith switchgearOils & fatTea, herbs & coffeeStarchBiotechnologySpicesFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyBeveragesBiopharmaceuticalNew arrivalsMiscella ...

Beer filters 45 hl / h performance, Kieselgurfrei

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CROSS-FEED SPLICER Manufactured by Fisher+Rückle Type: CROSSMASTER Model: FZR

The following materials are available: Cover Liner Piston Water Jacket Connecting Rod Fuel Pump Any Parts

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Manufacturer: Elmag Superfici - Type: TT1 -30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Pile feeder - separating head 2 buckles 1 knife Noise hood Batch counter LCD touch-screen control Belt delivery Sheet size : 490x650 mm - min. 120x172 mm (only Parallel fold) - min. 105x172 mm (with special equipment) - min. 174x174 mm (with cross fold) Fold length: min. 58 mm Paper weight : 40-250g/sqm Pile height : 590 mm Speed : 180 m/min

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw  ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor. (ask for different capacities), for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters (possible gearbox, instead), inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle typ ...

Size: 310 x 432mm Equipments: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

This TIGER UKA 600 Cross cut installation was manufactured in 2015. It features a 600 mm saw blade, a cutting capacity of 165 x 240 mm at 90 degrees, and a motor power of 5.5 Kw. The machine includes a TigerStop 7.5 Automatic Stop and pusher, enhancing precision and efficiency. Ideal for semi-automatic or fully automatic operations, it supports a maximum feed speed of 40 m/min. Contact us for more information about this machine.

The all-rounder combines outstanding workmanship with a wide range of work. Our machine also offers intuitive operation that optimizes your packaging processes. A high-quality material unwinder with double automatic roll centering ensures precise material guidance. In addition, our active material preference device ensures optimal web tension for flawless packaging results.  The extremely powerful brushless motors and the user-friendly color touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. Up to 50 different products can be stored. For this packaging line, we also offer fully and semi-automatic feeders, which we can also integrate for you at a later date. The machine is available in both directions and has a rotary cross seal with electroni ...

The machine is usually always in stock with us. Short delivery times are possible here. Features of the facility 1. Chain conveyor belt 2.5 meters long (other lengths possible on request) 2. Adjustable bag former 3. Double Film Loader + Automatic Film Centering Device 4. Rotary final sealing, single-sealing jaw 5. Solid, medium fin sealing structure 6. Four servo control drives - Active material preference shaft - Medium sealing - Final sealing - Conveyor belt 7. HMI Control Panel 8. Three individual temperature controllers 9. 304 stainless steel body 10. Documentation in local language 11. Print mark control 12. Bag length programmable 13. Standard walking direction left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depends on produ ...

Te Koop: Endress & Hauser flowmeter DN 25 Pro level 63F

Te Koop: Fischer & Porter flowmeter DN 25 ABB COPA-XE d DE 47 Tatalum

Te Koop: Fischer & Porter flowmeter DN 25 ABB TRIOWIRL VT41

Te Koop: Manifpld Scanio flow equipment. Mixproof valve. Type SN, 1.5 duims en 2 aansluitingen 38 12A.

Te Koop: Manifold Scanio flow equipment. Mixproof valve. Type: 2.5 duims en 2 aansluitingen.

Te Coop: Endress & Hauser flowmeter DN 15 Pro level 60F

Te Coop: Te Coop: Endress & Hauser flowmeter DN 15 Pro level 63F

Te koop Endress + Hauser Flowmeter Type: Promass 80F Serial number: 72034602000 Inclusief test certificaat Number: 1.02 Voor meer info graag bellen of mailen. email: wh.derikx@gmail.com Tel: +31620758459 De nu kopen prijs is excl. 21%btw

For sale: Endress & Hauser Flowtec variomag DI 651 DN 50, PN 40, IP65 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. Blade Position Adjusting on Power-Off function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm | sealing bar width: 230mm | max. speed of the machine in neutral: 100 cycles/minute | power: 220V, 3.75kW | infeed length: 3000mm | machine dimensions: L5050xW1190xH1650mm | weight: 1020kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from ap ...

REF-2720 ULMA ATLANTA FLOW WRAPPER WITH PHOTOELECTRIC EYE AND DOUBLE SEALING JAW Manufacturer: ULMA Model: ATLANTA Year: 1998 Horizontal flow pack wrapper (HFFS) equipped with photoelectric eye. Double film reel and double sealing jaw. Voltage: 380 V / 50 Hz / 16 A / 3Ph Total power: 3,5 kW Output: up to 250 p/min (depending on film and product) Pneumatic consumption: 50 litres/min; 6 bar Sealing jaw dimensions: 200 x 50 mm (WxH) Overall dimensions: 7,000 x 1,300 x 1,650 mm (LxWxH) Weight: approx. 910 kg

Machine was bought when the company was dissolved. Flowpack machine ITALDIBIPACK Dibiflow 500 – Year of construction 2021 – Very good condition For sale is a high-quality flowpack packaging machine from the manufacturer ITALDIBIPACK, model Dibiflow 500, built in 2021. The machine is in very good, well-maintained condition and is ideal for the efficient packaging of a wide variety of products in flowpacks. Specifications Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of Make: 2021 Connection: 400V – 3Ph + T + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Facilities & Features Robust stainless steel construction High-quality sensor technology for product and film recognition Adjustable guide rails for different product widths Clean, modern control and drive technology Ideal for food, non-food, industrial products and more CE marking Pe ...

Our state-of-the-art VFFS packaging machine is a generalist and has been developed to optimally support companies looking for the highest quality standards. With outstanding workmanship and a wide range of work, our machine offers intuitive operation that optimizes your packaging processes. The extremely powerful motors and the user-friendly colour touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. For this packaging line, we also offer fully and semi-automatic feeders including weighing systems, which we can also integrate for you at a later date. If you would like to optimise your packaging processes through a strong production output with high quality, we at Impuls Packaging are your ideal partner. Features of the facility 1. Single fi ...

Features of the facility 1. Chain conveyor belt 2 meters long (other lengths possible on request) 2. Adjustable bag former 3. Single Film Loader + Automatic Film Centering Device 4. Final sealing unit rotative, double-sealing jaw 5. Solid, medium fin sealing structure 6. Three servo control drives 7. HMI Control Panel 8. Two individual temperature controllers 9. 304 stainless steel body 10. Documentation in local language 11. Print mark control 12. Bag length programmable 13. Standard walking direction left to right Technical Parameters 1. Product length: L90-300mm 2. Product width: W30-160mm 3. Product height: H5-55mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material and number of sealing jaws) 5. Maximum film width: 370mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: about 6.5kw 8. Machine weight: ...

Description Item #8792 - FLOWPACK WRAPPER (used to pack individual lollipops) Manufactured by SCHIB Model CO90/C, Including MARKEM SmartDate 5 Coding Unit Packing Individual Ball Lollipops 25mms diameter x 83mms long. capacity around 350 packs per minute. and VARPE Checkweigher. 380Volts, 50Hz, 3Phase

Description Item # 8869 - FLOWPACK WRAPPER Manufactured by FUJI Model FW3710 Stainless steel Vertical cutting knife motion Photo cell Multi-belt drive infeed with sensors Brush action wrapping station Has been used for packing pizzas With ZETATRADE printer

Description Item # 9070 - FLOWPACK WRAPPERManufactured by FUJIModel FW3710/BSWith SplicerMachine in stainless steel1-Up Rotary Cutting Knife MotionInfeed Belt with 3 x SensorsBrush Action Wrapping StationLast being used to pack chocolate trays measuring 206mms long x 61mms wide x 54mms highMaximum pack size is 340 x 200 x 100mms high.FUJI infeed is about 1250mms longNominal maximum capacity 150 packs per minute

Description Item # 9129 – FLOWPACK WRAPPER Manufactured by FUJI Model Alpha VI FW3400 Year 2008 3 x 200Volts, 50/60Hz, 30A Also with a MARKEM SmartDate 5 Coding Unit (missing cassette reel Holder, not included) 100/230Volts, 50/60Hz, 1-2A Stainless Steel Flowpack Wrapper 4metres Long Infeed, currently set with 150mm lug gaps on Infeed Chain Driven 2-up Knife Head, 200mms across photocell for printed films Splicing PRO-FACE Plc Controls Was running at around 200 packs per minute Can run up to a maximum of about 400 packs per minute, depending on product/size/feeding system

Description Item # 9216 - FLOWPACK WRAPPER Manufactured by REDPACK (UK) model P325 S year 2021 including MARKEM SmartDate X65 Printer speed up to 250 per minute 400volt, 3ph, 50hz, 5kva Sealing jaws width. Is 140mm 2-up knife Coder is 53mm Infeed is 200cm Total lengths is 460cm.

Description Item # 9293 - FLOWPACK WRAPPER Manufactured by RECORD Model Scorpion MD-SP Year 2007 up to 120 packs per minute MD = Multi Drives, 3 axis, 3 x brushless servomotors, touch screen graphic display, 50 x product memories Previously used to pack skillets of biscuits Very long infeed conveyor to act as a stockage of product as well as getting the indexation correct With a DOMINO V230i thermal transfer overprinter Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Sealing jaws - 350mm long. Infeed conveyor - 185mm wide. Outfeed conveyor - 220mm wide. Overall dimensions - 4670mm L x 1350mm W.

Description Item # 9227 - FLOWPACK WRAPPER Manufactured by TEVOPHARM Model Pack-6 Built by ENTREC (Belgium) in Year 2011 Their Model Number Enpack-6-L 3Phase, 400Volts, 50Hz 1-Up Knife Head, This machine was built for big chocolate tablets. 1 kg 241x112x38mm with capacity of 24ppm 2,5 kg 250x215x45mm with capacity of 16ppmm 5 kg 430x240x45mm with capacity of 8ppm The Enpack-6 flow wrapper is a mechanical driven machine. Servo driven 2-way spotcorrection on sealing table. 2nd set sealing rollers is heated. Static pre-heating block between 1st and 2nd set of sealing rollers. Water cooled top plates on sealing table. Cross seal unit with CTC 159 (space between the two shafts = 110mm) 1 upper- and 1 lower sealing jaw, L=298mm, W=25mm, transvers profile (in running direction of foil). Cut off length: max 499mm, min 100mm. Flight bar transver unit in cross seal unit. Max foil width = 650mm Inc ...

Description Item # 9345 - FLOWPACK WRAPPER Manufactured by KLOCKNER TEVOPHARM Model P200-U Year 2003 Also with a KLOCKNER TEVOPHARM High Speed Cross Feeding Conveyor Model AD-8 Year 2003 Previously running on Praline bars, measuring 60 to 100mms long x 30mms wide x 15mms high Running at around 250 bars per minute Coding units included

Description Item # 9349 - FLOWPACK/PILLOW-PACK WRAPPER Manufactured by TLM PACK (Italy) Model Futura Year 2025 230Volts, 50/60Hz Photocell for foil reading 1-Up knife Was wrapping chocolate bars Wrapping at up to 100 packs per minute (depending on product length) Maximum product dimensions 220mms long x 50mms high x 120mms wide Maximum film width is 300mms With a SIEMENS 7-Inch PLC control Screen Only ever used for trials, never in production

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Bühler in Flowbalancer donor MAZF 15 (5 piece) 220 volt, 50 heart, Masch.Nr.: 544647 / 10 254 200 now available Mob. + 491715213204

Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for fully automated preparation of PCR and qPCR reaction approaches, designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to integrate into automated workflows. Automation: It automates the pipetting and distribution of PCR components (samples, master mixes, primers) in 96- or 384-well PCR plates. Volume range: The hardware is designed for aspiration and delivery of volumes up to 1 ml. Traceability: It has automatic tracking of barcodes on accessories and con ...

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Flowcon, Automatic Balance Valve, unused in original packaging -Type: F380.0.EBI F360111 -Price: per piece -Number: 2 piece -Dimension box: 185/100/H45 mm -Weight: 0.6 kg/piece

Te Koop: Endress & Hauser flowmeter DN 25 Pro level 63F

Te Koop: 3 stuks Endress & Hauser flowmeter DN 25 Pro size 40E

Air conditioner, air conditioning unit, condensate pump for air conditioner -Air conditioning - Manufacturer: Siccon - Type: Flowatch Design -Dimensions: 935/135/H75 mm -Weight: 1.3 kg

Te Coop: Endress & Hauser flowmeter DN40 Flowtec DI651 De prijs is incl. 21% BTW

Te Coop: Endress & Hauser flowmeter DN40 Discomag HI 6530 S De prijs is incl. 21% BTW