cross cut saw used for sale

: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.

Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mm saw band length: 2730 mm cutting width: 270 mm cutting speed: 37 + 74 m/min dimensions of saw-band: 2730 x 27 x 0,90 mm : 240 mm : 230 mm : 270 x 230 mm : 210 mm : 200 mm : 200 x 210 mm : 130 mm : 130 mm : 130 x 160 mm total power requirement: 1,2 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution High-quality processed and equipped metal band saw for saw cuts best quality For sawing solid material and profiles made of steel, stainless steel and aluminium Miter cuts up to 60 degrees left Saw band speed adjustable in 2 stages Frame and gearbox made from one piece, very quiet and low-vibration cut Easy, clear miter adjustment with scale Quick release vice with  ...

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

Cutting length: 3200 mm Cutting height: 1600 mm Motor output: 1,3 kW Dimensions (L/W/H): 4000x1500x2000 mm machine weight ab.: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This RALC ITALIA CUTTING LINE LYBRA was manufactured in 2014. It features an automatic circular blade for cutting metal tubes, including solid, tubular, and profiled types. Key components include a bar loader up to 6500 mm, multiple cutting capabilities, and a Siemens PLC for enhanced control. Ideal for high precision metal cutting. Contact us for more information about this machine.

This ANTHON COMPLETE CUTTING LINE was manufactured in 1994. It features a Siemens S5 control system, a portal feeding system with suction crossbeam, and a saw carriage with scoring and main saws. Ideal for handling package heights up to 150 mm. If you are looking to get high quality cutting capabilities consider the ANTHON COMPLETE CUTTING LINE we have for sale. Contact us for more information about this machine.

Panel saw manufactured in 2007. This HOLZHER 6310 CUT 110 features a cutting length of 4250 mm and a cutting width of 2700 mm. It includes a Cut Control system with touchscreen operation, a saw carriage with main and scoring saw, and a grooving unit with adjustable depth settings. If you are looking to get high-quality cutting capabilities, consider the HOLZHER 6310 CUT 110 panel saw we have for sale. Contact us for further details.

This 3-axis SCHÜCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 min⁻¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÜCO PDG E CUT double mitre saw we have for sale. Contact us for further details.

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter vacuum Cutmix 120 STL, model VCM 120 ,120 liters vacuum cutter, variable knife sdpeed, 2 bowl speeds, mixing speed forward and reverse, variable bowl speed, unloader manually operated, hydrlauic unloading device, knife cover electrically operated, with cooking facility. Further Information on demand. You are very welcome to test the machine in our facility in Koblenz, Germany.

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round blade, electrically oscillating knife and a milling machine (incl. suction device) • Multifunction tool head for holding up to 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universa ...

Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

CFS CUTMASTER 325V & 500V

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

GERBER Cutter Z7 automatic cutting machine was built in 2016 in China by Gerber Technology (Lectra). The machine is used in the production of clothing and all sewing products. It can cut both single and multi-layered fabrics with a maximum thickness of 7.2 cm (after compression). Cutting is performed by means of a robust, vertical oscillating knife, which ensures the highest cutting precision and shape repeatability regardless of the type of material. The advanced Knife Intelligence Plus” system controls the movement of the knife, changing its angle, cutting path and acceleration in real time to ensure precise cutting of repeatable parts for all layers every time. Cutting paths are additionally optimised by the SMARTbite system, which automatically adjusts the knife advance speed based on the height and type of overlap. The oscillating knife is continuously sharpened during cutting, ...

Corner cutting Krause

Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

for frozen meat blocks

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

REF-1059 CRM NEXUS 220 CHOP CUTTER Manufacturer: C.R.M. Model: NEXUS 220 Year: 2003 All stainless steel Power: 4 kW Voltage: 400 V / 3-phase Mobile on casters Max. product dimensions: length 100 cm, with 22.5 cm, height 27 cm Overall dimensions: length 221 cm, width 85 cm, height 136 cm

welding current: 20 - 60 A cutting capacity: 1 - 20 mm open-circuit voltage: 104 V Required air-pressure: min. 4 bar connected load: 7,9 kW connected load frequency: 400 V weight: 16 kg Dimensions (LxWxH): 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology Delivered without CEE plug. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Merkle Slitter Cutting width 1m Overall dims: 1.4m wide x 700mm deep x 1m high Weight: 500kgs

Merkle 500mm wide Slitter

speed of feed:: 50 m/min feed:: 5 - 99.999,9 mm cuts max.:: 70 - 80 Schnitte/m cross-section width:: 40 mm cross-section heigth:: 40 mm Condition: NEW, Specification: Hose and corrugated pipe cutting machine electric cutting machine - Cutting unit: Window cut with cutting bushes - Material diameter approx.: 4 - 40 mm - Transport by two drive belts - Max. distance between the belts: 45 mm - Belt adjustment via motor, adjustment via control panel - Belt adjustment via the centre - with a maximum speed of approx.: 50 m/min - Electrical contact pressure of the drive belts - Electronic length measurement from 5 - 99,999.9 mm Digital display - Step change: 0.1 mm - Cutting via electric motor - Quantity selectable: 1 to 99,999 Display digital - Cutting capacity approx.: 70 - 80 pieces/min at 100 mm l ...

Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A

John Marshall Cutter

Autogil Cutter

New Zig-Zag Cutter! Machine is designed to cut an 800mm Batch into an endless strip for Extruder feeding. 12 month Warranty! Description attached!

1 x Polar 115X guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Polar RA-4 jogger 1 x LW 1000-4 stack lift 1 x TR-130 unloader

Machine: Cut 25 line Manufacturer: Alpma Type: Cut 25 Year of manufacture: 2003 the Alpma Cut 25 line consists of: Alpma CUT 25 cutting machine Boekels piece scale Auto. Discharge for underweight pieces (cut or section) Auto. Discharge for overweight pieces (first cut or cut-off) Belt for 90° rotation of pieces Accumulation belt/intake belt for downstream form fill and seal machine The line was fully functional and had no defects. It was always maintained. the Boekels is installed on the right (after the CUT 25 cutting machine). Flow direction is from left to right. Documentation is available. Knife width 250mm Max. bar length approx. 800mm 120 cycles/min. A checkweighter is also still available if needed The line is dismantled and stored. If you are interested, you are welcome to inspect the line. Find more here - /

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

Key data: 2000 mm, 1300 mm

available Berstorff Bias Cutter Angle 0-50 degrees with manual splice 90 degree with automatic splice Ce certified Description attached!

1 x Wohlenberg 132 guillotine equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA 3 MAN unloader 1 x Baumann BB5 stack lift

1 x Wohlenberg 132 guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA3 unloader (year 2008)

Unit for precision cutting Make: IMA

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

CUTTING LINE - refurbished - consisting of 1) Polar137EM-MON AutoTrim = Cutting LINE 2) Unloader/palletiser TR TR1 EL145-1 LH standing 3) Jogger RA-B-5 with air removal roller 4) Paper Lift Full description of Equipment on request

welding current: 15 - 40 A cutting capacity: 1 - 16 mm open-circuit voltage: 96 V Required air-pressure: min. 4 bar connected load: 3,6 kW connected load frequency: 230 V weight: 9,0 kg Dimensions (LxWxH): 371 x 153 x 232 mm Exhibition machine Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schneidmaschine / Guillotine Wohlenberg CUT-Tec 92 Year 2007 - Serial-No. 3932-009 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition