We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Overhead crane with trolley, overhead crane STAHL ZL-C 125-13,60 E built: 1989 Load capacity: 12,500 kg Crane track average: 13,600 mm Cat track average: 1,400 mm Crane travel: 40 / 10 m/min Trolley travel: 20 / 5 m/min stroke: 5 / 0.8 m/min hook travel: approx. 5.8 m with test book and documentation ! Dismantled ! used, tested ! Dimensions: mm
used
Industrial crane scale, electronic crane scale GREIFZUG GmbH HFM 10T1 Weighing range: max. 10 000 kg readability: 1000 g diameter crane eye: Ø 50 mm diameter crane hook: Ø 40 mm with charger and transport case (wood) used, tested ! as good as new ! Dimensions( with hook and eyelet ): 300 x 190 x 840 mm Dimensions( case ): 400 x 170 x 150 mm
used
Overhead crane, indoor crane, assembly crane, workplace crane -with 2x electric cable pulls -Load capacity: 2x 1600 kg -Bridge load capacity: 3.2 tons - Wingspan: 6.4m -hall service -Dimensions: 2000/6400/H1000 mm -Weight: about 2000 kg
used
Column slewing crane, hall crane, workplace crane -Column slewing crane:Typ AS5-2,0 load capacity: 500 kg, with foundation plate steel plate 720 x 720 mm -Throat: 2,220 mm -Total height: 4800 mm -Hook height: 3,550 mm -Chain hoist: ABUS type GM3 500.6-111 built in 1995 -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Swivel range: 270° -Transport dimensions: 4800/720/H490 mm -Weight: 537 kg
used
Column slewing crane, hall crane, workplace crane -Column slewing crane: load capacity: 400 kg, with foundation plate steel plate 550 x 550 mm -Throat: 1.750 mm -Total height: 3540 mm -Hook height: 2,490 mm -with chain hoist: SWF type SKB0801205OHX4005 built in 2003 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Swivel range: 270° -Transport dimensions: 3540/800/H590 mm -Weight: 300 kg
used
Column slewing crane, hall crane, workplace crane -Column slewing crane: load capacity: 400 kg, with foundation plate steel plate 550 x 550 mm -Throat: 2,040 mm -Total height: 3540 mm -Hook height: 2,490 mm -with chain hoist: SWF type SKB0801205OHX4005 built in 2003 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Swivel range: 270° -Transport dimensions: 3540/800/H590 mm -Weight: 295 kg
used
Hand trolley, rolling trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, carrier trolley, monorail trolley -Manufacturer: Konecranes, crane chassis -Beam width: up to 242 mm -Load capacity: 2000 kg -Dimensions: see technical. Drawing in the photos -Dimensions: 335/300/H255mm -Town weight: 19 kg
used
Hand trolley, rolling trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, carrier trolley, monorail trolley -Crane chassis: beam width: up to 175 mm -Load capacity: 1000 kg -Dimensions: see technical. Drawing in the photos -Quantity: 8x chassis available -Price per piece -Dimensions: 245/200/H190 mm -Weight: 7.6 kg/pc.
used
Column slewing crane, hall crane, workplace crane -Manufacturer: Certex, column slewing crane type CA7118 load capacity 2000 kg -Base plate: Ø 810 mm - Throat: 5,060 mm -Total height: 3755 mm -Hook height: 2,615 mm -Chain hoist: Vink LIsse SIE7E -Main stroke: 4 m/min -Fine stroke: 1 m/min -Chain length: 3440 mm -Lifting movement: electric -Swivel/sliding movement: hand-operated -Transport dimensions: 5600/1300/H2000 mm -Town weight: 1286 kg
used
Column slewing crane, hall crane, workplace crane -Manufacturer: DEMAG, column slewing crane, load capacity 250 kg -Base plate: 375 x 375 mm -Throat: 3,040 mm -Total height: 3015 mm -Hook height: 2,100 mm -Chain hoist: DEMAG type PK2N-F -Main stroke: 10 m/min -Fine stroke: 2.5 m/min -Chain length: 2300 mm -Transport dimensions: 3090/800/H540 mm -Town weight: 203 kg
used
Column slewing crane, hall crane, workplace crane -Manufacturer: DEMAG, column slewing crane, load capacity 250 kg -Base plate: 450 x 450 mm -Throat: 4,060 mm -Total height: 3,515 mm -Hook height: 2,500 mm -Chain hoist: DEMAG type PK2N-F -Main stroke: 10 m/min -Fine stroke: 2.5 m/min -Chain length: 2800 mm -Transport dimensions: 4130/800/H500 mm -Town weight: 476 kg
used
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: Telemecanique, crane remote control with cable / portable crane control panel -Cable length: 23m -Connector: 16 pin -Dimensions: 600/400/H340 mm -Weight: 13 kg
used
Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: TER Tecno Elettrica Ravasi, crane remote control with cable / portable crane control panel -Cable length: 25m -Dimensions: 700/560/H380 mm -Weight: 18 kg
used
Push trolley, push trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, carrier trolley, monorail trolley -Manufacturer: Demag, crane chassis -Beam width: up to 163 mm -Load capacity: kg -Dimensions: see techn. Drawing with the photos -Dimensions: 250/243/H180 mm -Own weight: 15 kg
used
Adjustable traverse, crane traverse, traverse for pillar slewing crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Carrier dimensions: 360 x 150 mm (narrow I carrier) -Total dimensions: 4240/240/H630 mm -Own weight: 400 kg
used
Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane -Load capacity: 8000 kg -Traverse for: the transport of different loads -Dimensions: 3065/170/1195 mm -Net weight: 313 kg
used
Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Load capacity: 8000 kg -Dimensions: 4070/230/H770 mm -Own weight: 715 kg
used
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Number: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Own weight: 19 kg
used
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 -Type: RC-E 10 -Total dimensions: 380/180/H125 mm -Weight: 2.2 kg
used
Column slewing crane, hall crane, workplace crane -Manufacturer: Vetter, column slewing crane type M, load capacity 500 kg -Base plate: Ø 610 mm -Throat: 5,990 mm -Total height: 3,900 mm -Hook height: 2,960 mm -Chain hoist: Mannesmann Demag PK 2 NF -Main stroke: 5 m/min -Fine stroke: 1.25 m/min -Chain length: 3200 mm -Transport dimensions: 6500/1040/H1830 mm -Town weight: 810 kg
used
1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min
used
1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min
used
1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min
used
1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min
used
1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min
used
1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min
used
1 factory-tested, well preserved steel double girder overhead travelling crane Load approx. 16,000 kg Track width approx. 13,500 mm hook path approximately 3,600 mm Katz gauge approximately 4,200 mm Year of production / workshop test 1990/2016 Crane equipped with double girder trolley and steel drive units suitable for traverse operation, radio control, catwalk and overload protection Working speeds: Hoist CA. 0.6/4.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 4.0/16.0 m / min
used
Forklift attachment crane booms with hacking little used Producer: Seith conveying new village Type: 60.30/578 Load capacity: 5to LSP: 500 mm fixed boom and column Hacking adjustment by hand with adjust positions Weight: 240 kg ESP: 400 mm Gr. projection: approx. 1.6 m Overall length: 1.8 m, height: 1.4 m Clip on version on the stacker plate and clamp-on PROVIDER Machinery die GmbH 94094 Rotthalmünster, Germany registered since 2010 151 listings online & #57620;. REQUEST SEND Ladies and gentlemen, Please send us a quote for forklift attachment crane booms Salim conveyor Neuendorf crane boom 5 to type: to 60.30/578. Thank you very much and greetings I'm dealer quotes for similar machines interested in financing through leasing or hire-purchase
used
10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...
used
Double swivel crane Saleg swivel crane Zasche GSX 2x500-4,5 Complete Saeule + 2x swivel arm + 2x chain hoist Crane hook height 3.5m / swivel arm length 4m Saeule with 2 swivel arm holders each 500kg load capacity Stroke designation RUDK / ub speed 4 m/min Total usage 611 hours / usage reserve 988 hours
new
weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 25 ...
used
Offer 23357 THE CRANE CAN BE VIEWED AT THE D-03042 COTTBUS SITE BY APPOINTMENT. Technical data approx.: - Load capacity 2000 kg - Track gauge approx. 6.5 m - Operation via handheld remote probe - Hackenweg up to approx. 5000 mm - Reeving 4 / 1 - Vertical clearance approx. 600 mm - Wheelbase approx. 2000 mm - Driving beam length approx. 2360 mm - Speeds approx. - Cat chassis approx. 20 5 m/min - Hoist approx. 4 + 1.0 m/min - Crane chassis approx. 6.3 + 25 m/min - Total weight – crane approx. 1500 kg - without pictured chain hanger
used
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Garrier width: 260-300 mm -Payload: 2000 kg -Dimensions: 420/290/H240 mm -Own weight: 26 kg
used
Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane -Payload: 1000 kg -Dimensions: 4650/210/H90 mm -Own weight: 9 kg
used
VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2
used
VETTER AS16-4.0 1.6 T pillar jib crane manufactured in Germany in 2014, is used for unloading, assembly work as well as for machine operation. The combination of a lightweight, low-profile design with a powerful electric drive ensures fast and safe movement of various types of loads with a maximum weight of 1600 kg. This makes the VETTER ASSISTENT AS pillar crane ideal for limited spaces, production facilities and outdoor areas. Technical data of VETTER AS16-4.0 1.6 T pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4 m - maximum lifting height: 2,5 m - rotation angle: 270° - electric chain hoist - lifting class (EN 13001): HC2 - stability class (EN 13001): S2
used
Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)
used
TECHNICAL SPECIFICATIONS Manufacturer: HANS FEHR Kranbau Designation: Overhead crane, single-girder overhead travelling crane Type: 5.0 t Year of construction: 1979 Payload: 5,000 kg Hook path: 7.0 m Lifting speed: approx. 8 m/min Stroke speed. at fine stroke: approx. 0.8 m/min Total crane length: 11,300 mm
used
Pillar crane, jib crane, pillar jib crane MECHANICS TAUCHA 250 / 3.5 ( 250/3.5 ) Load capacity: 250 kg Projection: 3500 mm Height under arm approx.: 3200 mm total height: 4100 mm foot 600 x 600 mm ! suitable chain hoist K209, K250, K251 ! used, tested ! Transport dimensions: 4200 x 1500 x 1100 mm
used
Suspension crane, overhead conveyor system, with electric chain hoist ABUS KRANSYSTEME Single girder crane EHB Lifting capacity: 80 kg crane girder length: 10 m track length: 13.5 m chain hoist: YALE CPVF 2-8 Load capacity: 80 kg Lifting speed: 2 / 8 m/min, Chain: 4x12,2-DAT used, tested ! Dimensions (shipping): 2600 x 900 x 600 mm still measure !
used
Wall crane, jib crane, wall-mounted jib crane PAGUS Projection: 3950 mm Profile boom made of hollow steel section: 90 x 110 mm Swivel range: 180° Swivel point: 190 mm from wall 2 Mounting plates: 120 x 300 mm necessary wall area for fastening: 800 x 300 mm used, tested ! Dimensions: 4200 x 600 x 1200 mm
used
Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.
used
Pointer crane scale, crane scale, tensile force gauge MESSGERÄTEWERK MAGDEBURG 20 000 kg (20 000 kp) division: 200 kg (200 kp) diameter crane eye: Ø 100 mm used, tested ! Dimensions: 1150 x 310 x 190 mm
used
Industrial crane scale with bright LED display KERN & SOHN GmbH HFM 1T0.1 Weighing range: max. 1000 kg readability: 100 g diameter crane eye: Ø 68 mm diameter crane hook: Ø 40 mm with remote control, manual and charger used, tested ! as good as new ! Dimensions( with hook and eyelet ): 270 x 175 x 610 mm Dimensions( transport ): 550 x 350 x 300 mm
used
Offer 23356 THE CRANE CAN BE VIEWED AT THE D-03042 COTTBUS SITE BY APPOINTMENT. Technical data approx.: - Load capacity 2000 kg - Track gauge approx. 6.5 m - Operation via radio remote control - Hackenweg up to approx. 5000 mm - Reeving 4 / 1 - Vertical clearance approx. 600 mm - Wheelbase approx. 2000 mm - Driving beam length approx. 2360 mm - Speeds approx. - Cat chassis approx. 20 5 m/min - Hoist approx. 4 + 1.0 m/min - Crane chassis approx. 6.3 + 25 m/min - Total weight – crane approx. 1500 kg - without pictured chain hanger
used
10 TON GANTRY CRANE - 13.55 meter PUIL E&C P0061GANTRY CRANE GCH-107(SG-25) 10T x 13.55MS x 7.5MH Please note: This lot is subject to a buyer's surcharge of 10%, VAT might be applicable, and is sold subject to award. Make PUIL E&C Type GANTRY CRANE Year 2007 Capacity 10T x 13.55MS x 7.5MH
used
40 TON (40/10 TON) OVERHEAD CRANE DAESUNG OVERHEAD CRANE (40/10T37.4MS16MH) Main Hoist - 40 Ton Auxiliary - 10 Ton Please note: This lot is subject to a buyer's surcharge of 10%, VAT might be applicable, and is sold subject to award. Make DAESUNG Type OVERHEAD CRANE Capacity 40/10TxSP41.2M OHC