crane used for sale

LENGTH :17200M DOUBLE GIRDER

Height from floor to lifting hook: 5 meter Horizontal movement of hoist: 6 meter Kind of: jib crane Capacity: 1500 kg

Demag Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Abus Jib crane 3 meter / 500 kg

Abus Jib crane 2.5 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -

Bode welding crane

Overhead Crane Indoor Crane Overhead Crane Steel Crane 1 t / 20.4 m STEEL EL-A10-20,410 E Year of construction :1999 Load capacity: 1000 kg Lifting height (max. hook travel): 6 m Gauge center (span) : 20,410 m Crane weight complete : approx. 3 t Degree of protection: IP54 Connected voltage: 400 V Control voltage :230 V Works perfectly, carefully removed and packaged, maintained in good condition, regular maintenance and inspection Documents available such as test book, data sheet, technical documentation, circuit diagrams, operation and maintenance instructions Prices: 7,500.00 Euro net + 1,425.00 ( 19 % VAT) = 8,925.00 Euro gross All prices are net including loaded onto trucks VAT reclaimable Shipping possible. Several cranes available in different span and lifting capacity

ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the

Wall slewing crane DEMAG type KBK 2Demag No. boom: KBK- 982 040 44Demag No. wall bracket : 85104044Year of construction 2000Lifting capacity: 500 kgRadius: 4000 mmSwivel range 270Wall mounting plate: 1170 x 440 mmHeight UK- Boom to OK- Wall bracket: 1000 mmFlange plate Wall bracket to middle Bolt: 270 mmTotal length Flange plate Wall bracket to boom tip: 4330 mm: - Boom profile C-profile rail DEMAG KBK 2- Carriage for C-profile rail DEMAG KBK 2- Original paint yellowWeight 170 kgVery good conditionPrice without

Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long

Swing boom crane boom crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Built: 2014 New and unused Load capacity permissible load weight max: 25 kg Working radius approx.: 3,000 mm Stroke max: 800 mm Lifting speed max. : approx. 800mm/sec. Energy supply: pneumatic Mounting: Swing boom with stand column Net weight device (with load-carrying equipment): 287 kg Pneumatic working pressure: 6 bar Air quality required for maximum load-bearing capacity: clean, dry and filtered (5 microns) Air consumption max.: approx. 17 Nl/ double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale

Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.

Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used

E-chain hoist, electric hoist, crane STAHL type R 12Fabr. No. 3437532 Year of construction 1979Load capacity: 1250 kgHook travel: 2.4 metresLifting speed for one load train: 8 m/min. Fine lifting speed for a load train: 2 m/min. Lifting speed for two load trains: 4 m/min. Fine lifting speed for two load trains: 1 m/min.2 load trains = 1250 kgEngine power: 1.25 / 0.25 kWNetz connection 380 volts, 50 Hz- without chain bag- trolley carriage for KBK 2 - double girder crane bridge, overhead cranegood condition; used

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Indoor crane, crane, crane runway, crane rails, steel girders, medium-width I-beams, double-T-beams, IPE steel girders with manual trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Beam: IPE 240 -Carrier width: 120 mm -Equipment: 1x IPE steel beam, 1x roller chassis, 2x adjustable stops -Load capacity: 1000 kg -Dimensions: 5480/120/H245 mm -Weight: 182 kg

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total

hall crane, crane, crane runway, crane rails, overhead conveyor, light crane system -Manufacturer: Demag, 2x straight sections overhead conveyor for light crane system KBK II -Load capacity: 800 kg -Dimensions: 1x 6015/105/H195 mm / 1x 5630/105/H195 mm -Delivery/Price: complete -Total weight: 189 kg

Chassis number: W09212200FEL65037, Equipped with engine power: ±100 kW (≈136 hp), Engine: Deutz-type diesel, Max. torque: ±570 Nm, Transmission: powershift, 3 forward / 3 reverse, Top speed: 40 km/h, Climbing ability: ±60%, Winch speed: ±100 m/min, Lifting force winch: ±27 kN, Swivel speed: ±2.5 rpm Outrigger base: ±5.6 x 5.6 m., hour reading not readable, Please note! Crane does not run. Electronic malfunction. Auction-ID: A1-40132-81

Hoffmann rail crane, track 1m, telescopic crane extension 16m, lifting load 16t, electric overhead drive, or MAN diesel engine. Weight approx. 45t. For questions 0049 1604444300 net price 12.500,-€

Crane hook Capacity: 0,7 tons Crane hook is fully functional, but not suitable for our requirements.

Crane hook Capacity: 80 tons Crane hook fully functional, but not suitable for our use.

10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...

1 factory-tested pillar crane Payload 1000 kg Reach 5,000 mm Height approx. 4,000 mm Bottom bracket 3,170 mm Make of ABUS Workshop examination 2015 Electric chain hoist, floor operation with a new coat of paint Working speeds: Hoist around 1.5 / 6.0 m / min Trolley gear by hand Slewing gear by hand

Lattice boom crane Manufacturer: Gottwald Type: AK 70 Load capacity: 70 tons Year of construction: 1961 The lattice boom crane is operational, but heavily in need of renovation.

2 pieces of crane bottles

1 factory-tested, well-preserved pillar jib crane Payload 1000 kg Projection about 6,360 mm Overall height approx. 3,350 mm Bottom bracket approx. 2,850 mm make of ABUS Workshop examination 2015 equipped with an electric chain hoist, floor operation on the boom moveable, and a new coat of paint Working speeds: Hoist around 1.0/4.0 m / min Trolley gear by hand rotation by hand The photos show a sample crane

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

Lattice boom crane Manufacturer: Italgru Type: 80 tons Load capacity: 80 tons The lattice boom crane is fully functional and is still in operation! Can be visited at any time!

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min