crane used for sale

Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Power: 4x5/3/1.29/0.86 kW -Resistance: 4x 33/28/66/100 Ohm -Dimensions: 595/480/H955 mm -Weight: 58 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Pillar jib crane, indoor crane, workstation crane -Load capacity: 250 kg -with chain hoist: Demag type DKUN 1-125 K V1 F4 -Projection: 2310 mm -Total height: 1900 mm -Transport dimensions: 2400/800/H500 mm -Own weight: 172 kg

Electric chain hoist, crane, indoor crane, assembly crane -Load capacity: 125 kg -Main stroke: 8 m/min -Hakenweg: 5 m -Control switch -Weight: 25 kg

crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control -Manufacturer: NBB, radio remote control with charger -Type: SL 48-2/MOV HF:SM 430 -Charger: LAD 0470 -Total dimensions: 230/210/H170 mm -Weight: 3.2 kg

drum diameter:400 mm revolutions per minute:980 U/min total power requirement:2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side ...

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

We have 3 cranes for sale. 2x column edwing crane (250kg payload of the brand ABUS) and 1x wall swivel crane (200kg payload of the brand ABUS). The cranes are in a top condition and were mounted only briefly, all documents are completely available.

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

Truck DAIMLER CHRYSLER Actros 2644 with loading crane HIAB 330-5 + Jib 90-4 Truck DAIMLER CHRYSLER Actros 2644, B9th3af Wheel drive 6x4, air suspension front and rear, AHK, open box with charger, FG-No. WDB9302441xxx EZ 06/04, GG 26 t, km-stand approx. 417,000, diesel, green badge, HU 09/19, 11.946 cm3, 320 kW Crane Hiab 330-5 with radio remote control Jib 90 with winch Rotzler, 3 hydraulic ejectoons + 1x mechanical ejectothe. Maximum extension 26m with lifting force 690kg

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology for high corrosion protection and highest surface quality Targa concept with separation between unit side and operating side f ...

Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

DYNAJET 500me/30 basic - 400V/50Hz Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/ ...

DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/tria ...

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! World's first 1000 bar high-pressure cleaner without control cable and with dry-closing Pistol. The new DYNAJET Trolley 1000 me combines the greatest possible ergonomics and maximum strength for concentrated efficiency. This makes DYNAJETten even more environmentally friendly, more efficient and safer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal  ...

DYNAJET 800me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/trian ...

DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...

Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

ynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery  ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

DEMAG OVERHEAD CRANE 40ton x 34 M SPAN + 5.2 ,M CANTILEVER MHE-DEMAG DOUBLE GIRDER GANTRY CRANE TYPE ZVPW YEAR 2011

OVERHEAD CRANE DEMAG 40 TON. X 18.6 M SPAN + 6.35 M CANTILEVER MHE - DEMAG DOUBLE GIRDER GANTRY CRANE, TYPE ZVPW, YEAR 2015.

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...

Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance perfect as a supplement to large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus all-plastic sheet. • Handle profile on all elements • Snap edge on the large elements • Element widths up to 90 cm Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance, perfect as additional large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus solid plastic panel. • Handle profile on all elements • Knuckle edge on the large elements • Element widths up to 90 cm

SCHLOTTER Galvanotechnik galvanising line, manufactured in 1994 in Austria, is designed for professional electrochemical treatment on various types of workpieces. During the treatment, a special coating is produced which protects the workpieces from mechanical damage and corrosion. The SCHLOETTER Galvanotechnik galvanising line, characterised by its high reliability and low operating costs, is equipped with a modern control system, which makes it possible to control the ventilation system and to adjust parameters such as process time in the galvanising baths and heater on/off times. The galvanising and phosphating line is fully complete and ready for operation. Equipment of the SCHLOTTER Galvanotechnik automatic galvanising plant - tumbler trolleys (6 sets) - trolleys for suspension system (5 sets) - centrifuges (2 pcs.) - rectifiers (3 pcs.) - workpiece dryer - ventilation s ...

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

Baljer & Zembrod round timber handling, sorting, transport and cutting vehicle - German production - measurement of the length of wood - automatic cutting cycle TECHNICAL PARAMETERS: - diameter max logs 1000 mm - crane outreach max 9200 mm - crane working angle 225" - rotatable head 360 " -Lifting capacity: 2000 mm - 2560 kg 7240 mm - 1680 kg 9200 mm - 1330 kg - truck size 6000x2150 mm - dumper with hydraulic dump on both sides - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m / min SAW HOLTEC FS 121 - log length measurement - working length 1000 mm - hydraulic guide stroke - manual and automatic mode - lifting a log - integrated sawdust extraction 2.2 kW - drum for winding the cable Transport dimensions 12.5 x 2.4 x 2.4 m weight 12000 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -PVC coated -Length: approx. 50 m -Also other crane ropes available -Weight: 6 kg

Doka Frami panel formwork 335 m2 Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Quick and universal use thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to a practical element grid Excellent concrete results due to particularly stable design Doka Frami Framed formwork 335 m2 Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and plann ...

crane scaleMax. Weighing capacity: 500 kgkl. Display: 2.0 kgWeight approx: 20.5 kgOutside dimensions approx: 620 x 340 x 135 mmWith- suspension eye- crane hookvery little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

Manufacturer: Gietart Type: GW 1530-425 Year of construction: 1979 Location: Papenburg Operating hours: approx. 7,150 blasting hours (from 2001 onwards) Components: 1. Support crane 2x3,2 to. with Truninger profile magnet system (optional) 2. 5 transverse transports approx. 10.50 m 3. 13 m inlet roller table 4. Preheating furnace with 4x80 kW thermal power Bottom/Top 5. Gietart blasting system GW 1530-425, YOC 1979, (W:1,5mxH0,4m), 4 x 18,5kW centrifugal units 6. Gietart Lackiercenter BJ 2000 7. Drying tunnel approx. 10 m 8. Chain conveyor approx. 13 m 9. Color filter Donaldson Torit DFT 3-12 BJ 2000 incl. Precoater 10. Jet filter Donaldson Torit TD 6120 - 0 incl. afterfilter (police filter) for indoor installation 11. 13 m roller conveyor 12. 5 transverse transports approx. 6 m 13. Crane system 2x3,2 to. with Demag magnet system (optional) The complete plant was ...

THOFEHRN 3 to Crane Hoist / Wire Rope Hoist Cable winch, incl. control, gearbox + motor, German Crane

Capacity: 620 hl, Pressure: 2 bar, Temperature: 25 °C, Width: approx. 3,6 m, Material: Stainless steel, Features: Outlet DN 65,coolable with glycol, completely insulated, the BAM is equipped with 3 crane eyes, the Edel tank is equipped with 2 crane eyes , Code: 757

ID3220 2 pieces/2 pieces self propelled transport ship Self-propelled transport vessel year/Year of construction 1981 Length 68.93 m, beam 7.03 m, draught 2.01 m, freeboard 0.415 m, displacement 855.52 cbm, Transport capacity 600 tons, 5 watertight transverse bulkheads, 1 hold, 2 propulsion engines, 2 main propellers, 394 KW main propulsion power, 1 bow anchor winch with power drive, 1 stern anchor winch with main drive, main rudder drive electric-hydraulic, Schottel SRP150, flank rudder drive, bow rudder, bow thruster, bilge pump 660 l/min, Crane (payload up to 2000 kg) Length 68.93 m, beam 7.03 m, draught 2.01 m, freeboard 0.415 m, displacement 855.52 cbm, 600 t transport capacity, 5 watertight transverse bulkheads, 1 cargo space, 2 propulsion motors, 2 main propellers, 394 KW main propulsion power, 1 bow anchor winch with power drive, 1 stern anchor winch with main drive, main r ...

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 750 kg -Lifting speed: 9.5 m/min -Lifting height: 9.5 m -without service -Dimensions: 730/420/H340 mm -Weight: 160 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: approx. 26 m -for electric wire rope hoist -Also other crane ropes available -Weight: 9 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 34 m -for electric wire rope hoist -Also other crane ropes available -Weight: 36 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 28.7 m -for electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 2x roll available -Weight: 10.5 kg/piece

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 16 mm -Length: approx. 22.8 m -for electric wire rope hoist -Also other crane ropes available -Weight: 19 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 25 m -for electric wire rope hoist -Also other crane ropes available -Weight: 17 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 25 m -for electric wire rope hoist -Also other crane ropes available -Weight: 24 kg