crane rail used for sale

weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Total weight, approx.: 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - t ...

Auction-ID: A1-45711-192

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DIwith Dematik BUS control via crane system controlFabr. No.61456646 Year of construction 2003Lifting capacity: 200 kgHook travel: 4.0 metersMain lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm1 Load train = 200 kg- with control logic DKES2/5 500V- without crane operation- Dematik BUS control via crane system control- without roller chassisMains connection: 400 Volt, 50 HzNominal power: 750 WNenncurrent: 2.4

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Auction-ID: A1-45711-310

Lifting cylinder defective. Auction-ID: A1-45383-26

Electronic crane scale MWT type 142Fabr. No.: 142571 year of construction 1993Tensile force meter, crane scaleMeasuring range: 2,500 to 80,000 kgSmallest measured value: 20 kgPower supply via 12 volts Cordless suspension shackle for double hooks, anchor hook operation, storage of the measured values and tare via remote control- Memory for measured values (weights)- Printer for measured valuesVery solid and high-quality body made of steelWeight: approx. 200 kg; used

Crane scale with power supply and remote control Load capacity in kg 10000 kg Weight 10 kg Dimensions L x W x H 700 x 300 x 300 mm

Additional title: Slewing crane, Maximum load: 2000 kg, Reach: 4 m , Lifting height: 3 m, Length: 4,00 m, Height: 4,61 m

E-chain hoist, electric hoist, crane STAHL type Si T 201-10/2,5No.: 1202373 year of construction 1989Load capacity 250 kgHook travel = lifting height 3.5 metersLifting speed 10 m/min. Fine lifting speed 2.5 m/min.2 load strands = 250 kgCable length of operating bottle approx. 1.4 metersMains connection 400 volts, 50 Hz.- Suspension eye on the top of the craneWeight: 22 kgGood condition; used

weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Total weight, approx.: 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size L ...

E-chain hoist, electric hoist, crane GIS type EM 25Fabr. No: 24468 Year of construction 1998Lifting capacity: 250 kgHook travel: 3.4 metersMain lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min.1 load string = 250 kgCable length Control bottle: approx. 1.7 metresPower supply: 400 volts, 50 Hz- suspension eye on the top of the crane - without chassisWeight: 24 kggood condition; used

weight max. in kg: 1000 kg arm length: 4000 mm height: 3000 Unterkante Ausleger total column height: 3790 mm swivelling range: 270 Grad Total weight, approx.: 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set)  ...

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801899 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.7 metersPower supply: 400 volts, 50 Hz1 load train = 100 kgWeight 16.5 kgGood condition; used

Group: 2M Kind of: hoist Capacity: 16 ton Drop: 8 meter

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801900 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz1 load string = 100 kgWeight 16.5 kgGood condition; used

Overhead Crane: - Brand: ESQUIVEL - Model No.: EB305-2/1 MEK10 - 1 TN. - Length: 7.5 meters, Height: 4.5 meters - Year: 2007

weight max. in kg: 10000 kg weight: 10 kg with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric hoist, crane, electric wire rope hoist, winch DEMAG type P 10Fabr. No. 941 477 Year of construction 1962Lifting capacity 2000 kg at 4 stringLifting height 5 metersLifting speed 6 m/min. Fine stroke speed 1.3 m/min. Reeving 4/1Motor power 0.6 / 2.6 kWNet connection 380 volts, 50 Hz- DEMAG hoist, type 19/11 K28P- DEMAG electric chassis, type 13 / 6 K8- 1 travel speed approx. 19 m/min- Chassis for double T-beams, beam width 120 to 180 mm- Load hook for 4 load trains- Control bottle for the hoist

E-Chain Hoist, Electric Hoist ELEPHANT / FBH (Japan) Type F(S)2-A(B4-B6)M(P-G)Fabr. No. 03278 Year of construction 1997Lifting capacity: 2000 kgHook travel 2.6 metersHood lifting speed 3.8 m/min. Fine stroke speed 1 m/min. Chain size 7.1 x 21 / quality class 8Cable length operating bottle approx. 2.5 metersMains connection 400 volts, 50 Hz.2 load trains = 2000 kg- emergency offdead weight 70 kggood condition; used

E-chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1Fab. No. 1524132 Year of construction 1997Load capacity 2000 kgHook travel 4 metersMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Load Trains 2Cable Length Operating Bottle approx. 0.9 metersNominal Power 1.6 kW / 0.36 kWNenncurrent 4.3 A / 2.5 ANetching Connection 400 Volts, 50 Hz- Suspension Eye on the Top of the Crane- Emergency StopWeight 75 kgGood Condition; used

Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 035884 Year of construction 2018Load capacity 240 kgHook travel 2 metersDistance suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used

Column slewing crane DEMAG type KBK 1Year of construction: approx. 1980Lifting capacity 500 kgSlewing range 270Radius 2000 mmOverall height 2300 mmHeight to lower edge boom 1800 mm- Boom profile DEMAG C-profile rail KBK 1- Carriage for DEMAG C-profile rail KBK 1- Base plate crane column L x W x H = 370 x 370 x 20 mm (4 holes approx. 27 mm)Net weight 145 kg; used

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used

Offer 22650 Specifications: - Lifting capacity 2100 t - Y distance in width 4.0 m - Y – dimension in length 3.5 m - 3 load handling hooks at the Y ends load capacity each 1000 kg - Forklift drive-in shoes W 500 x H 230 mm - Truss dimensions approx. L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Center truss tube made of square tube 140 mm - Overall height approx. 510 mm - Transport dimensions L 3.2 x W 2.1 x H 0.55 m - Weight 600 kg

Offer 25153 Specifications: - Load capacity 12.5 t - Truss length 2900 mm - Truss height 350 mm - Truss beam consisting of 2 x UNP 200 - 2 x sling chains with ring + shekel L 1400 mm - Anchor points with spacing 1400 mm - left + right 4 pcs double load handling hooks each - Distance between the mounting hooks 300 mm each - Space requirement approx. L 2900 x H 350 x D 500 mm - Net weight approx. 500 kg

2 KEER OP VOORRAAD Capacity: 250 kg

2 keer op voorraad nbsp; + geleiding Capacity: 125 kg

Demag hoist DCS PRO 10-1000 1 TON

weight max.: 3 t clamping width: 480 / 880 mm adjustment range - horizontal: 400 mm adjustment range - vertical: 600 mm total power requirement: - kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,60,41,1 m Shipping weight: 300 kg Packing: ca. 1,2 x 0,7 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 3600 mm total column height: ca 5500 mm weight max. in kg: 1000 kg travel of hook: 3000 mm height of hook: ca. 4000 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25388 Specifications: - Load capacity 1000 kg - E. chain hoist VETTER - 2 lifting speeds 4 + 1 m/min - Projection approx. 2000 mm - Boom IPE 220 - Hook height approx. 2700 mm - Swivel radius 360° - Total height approx. 3300 mm - Stand area stand / bucket approx. 1400 x 1400 mm - Total length approx. 2900 mm - Total weight approx. 4400 kg - Connection 400 V / 32 A

Demag 60 ton x 24 100 mm Kind of: overhead travelling crane Capacity: 60 ton Span: 24 100 mm Drop: 23 meter Tackle speed: 1 & 4 m/min Rotationspeed: 12,8 & 50 m/min Displacementspeed: 8 & 92 m/min Numbre of riggers : double rigger

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

Manufacturer: GZTU Type: LNE Year of Make: 2004 Lifting capacity: 8 t Wingspan (conical vertex spacing): 10.4 m Overall width: 10.6 m Travel speed: 20 m/min 400 V / 50 Hz Net weight: 3.1 t Noise level: Lm(A) ≤ 85 dB(A) With radio remote control and documentation. More information and exact dimensions can be found in the pictures.

winch: inkl. lifting capacity: max. 2t. auf 2,7 Meter lifting capacity: max. 1 Tonne auf 5,3 Mete Number of working hours: 270 h electrical: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Vetter Rotomax Turning Crane 80 to Details Type Rotomax Vetter Rotomax Load Turning Crane 80 to Machine no. 003074/1 Year of construction 2000 Load capacity 80,000 kg Net weight: 12,200 kg Wheel distance 1,600 - 6,000 mm Angle of inclination of the turning devices ß = 20 Max. torque 95,000 Nm Rotation speed 1.9 m/min Voltage UB 400 V 3 AC Control voltage Ust 24 V 1 AC incl. new slings and used slings incl. radio remote control

TECHNICAL DATA: Single beam system Track width: 12.9 ml Lifting height: 6 m Lifting speed: 5.00/0.83 m/min Lifting force: 2 t Installed power: 2.7 kW Voltage: 380 V COMPLETE WITH: 06 masts: 5 m each 04 Crossbars/Travel Paths: 10.35 m each

weight max.: 0,5 t stroke: 500 mm height of hook: 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 4015 TRAVERSE CRANE Manufacturer: KONE, Type: SWL 20 T KR2 Machines NO.: 93541, Year of manufacture: 1986 Specifications: Gr. lifting capacity 20000 kg Lifting height 13500 mm Wingspan 19000 mm Lifting speed 5000/300 mm/min Total power 18.5 kW Feinheiss. true Radio Controlled Length: 19.000 mm, Height: , Width: , Weight: 20.000 kg

An ABUS lightweight portal hall crane is available. Load capacity: 1000kg, dimensions X/Y/Z: 1000mm/4000mm/3280mm. An on-site inspection is possible.

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column-mounted jib crane, Vetter, 1,500kg, 6m boom, 6m high – unused - : Price from location: only 13.950.-€ (net)! Manufacturer: Vetter Type Master M Year of Make: 2022 Load capacity P: 1500kg M15-6.0 Column-mounted jib crane designed in accordance with the EC Machinery Directive, EN 13001 and VDE regulations, for outdoor use 4 Beaufort (20 – 28 km/h; moderate breeze). Identification number: 50010400 EN 13001 HC2 S3 HD2 Swivel range SB: 360° ∞ Max. permissible Hoist weight Gk 180kg Max. permissible Hoist speed VH 16m/min Projection A 6000mm Bottom edge boom UK 6000mm Overall height B 6470mm Bolt circle diameter DL 630mm Flange Outer Diameter DF 710mm Beam flange width F 180mm Approach dimension Aa 250mm Approach dimension Ai 915mm Pressure Column Length B1 1540mm max. vertical force Vk max. 32kN max. moment Mk max. 11575kNcm Weight 1756kg Operating ...

Complete indoor crane 5 x 1.7 m I-beam 2 x 5 m, 2 x 1.7 m Chain hoist Konecranes XN 5 year 2001 - very little used Lifting speed 1/4 m/min Engine. Cat drive Control cabinet with electrical diagrams complete with screws, brackets, I-beams etc.

Technical data : - Load capacity approx. 30 t - 2 crane mounting holes with through bolts 80 mm - Distance between the mounting bolts 100 mm - 2 stop extinguishers with a diameter of 65 mm - Distance between stop openings 235 mm - Stop height 800 mm - Overall height 990 mm - Truss beam HEM 360 - Truss dimensions approx. L 3150 x W 400 x H 480 mm - Weight approx. 450 kg

Offer 25501 Self-standing – movable / movable – column slewing crane Technical data approx.: - Load capacity 500 kg - E. chain hoist DEMAG DC – ComA 5 Bj.20 - Lifting speeds 4.5 + 1.1 m/min - Projection approx. 2000 mm - Crane girder IPE 180 - Hook height approx. 2400 mm - Swivel radius 360° - Chassis under pedestal bucket for moving the entire crane - Total height approx. 3100 mm - Stand area stand / bucket approx. 1050 x 1050 mm - Total length approx. 2600 mm - Dimensions with landing gear approx. 1400 x 1050 mm - Total weight approx. 3500 kg

Offer 25429 Technical data : - Load capacity 1 t - Crane attachment eye in the middle - Suspension height approx. 500 mm - 2 adjustable stop eyes adjustable 1000 to 2500 mm - Adjustable distance 150 mm - Truss cross-section W 100 x H 100 mm - Overall dimensions approx. L 2650 x W 170 x H 500 mm - Weight approx. 70 kg

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

SWF-hijsinstallatie Kind of: overhead travelling crane Capacity: 10 ton Span: 17 000 mm