crane rail used for sale

LENGTH :17200M DOUBLE GIRDER

Demag Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 500 kg

Abus Jib crane 2.5 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Demag Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm Drop: 2000 mm

Abus Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm

Abus Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 5000 mm Drop: 3500 mm

Abus Jib crane 250 kg Kind of: jib crane Capacity: 250 kg Span: 7000 mm

A workshop crane is offered for lifting and maneuvering engines, assemblies, machine components, and heavy workshop parts. Max. lifting capacity: 2000kg, Load capacity per boom position: 2000kg/1700kg/1500kg, Design: mobile and foldable, Min./max. hook height: 175mm/2490mm, Leg height: 208mm, Boom: telescopic, Min./max. boom length: approx. 1295mm/1595mm, Weight: 165kg, Overall dimensions in working position: X/Y/Z: approx. 1900mm/1170mm/2490mm. Inspection possible by appointment.

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Traverse for a crane 3t - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Traverse for a crane 3t Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Traverse for a crane 3t Price: 1200 EUR Download PDF Traverse for a crane 3t Size 1145x1940mm Capacity 3000 kg 4 length-adjustable chains terminated with a hook Main hook with adjustable position and lock The traverse has a base on wheels for easy movement Production Pfeiffer, Germany. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our  ...

Mobile crane Battery truck - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Mobile crane Battery truck Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Mobile crane Battery truck Price: 9500 EUR Download PDF Mobile crane Battery truck Device bought from stock, condition as shown in the photos, brand new, only 50 hours of work. Hydraulic drive. Capacity 700 kg Control from the steering wheel or the desktop. Charger included. Smooth speed control, safety button, horn, ignition switch. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do no ...

gt;gt; Esab A6 GMD lasnaad volgsysteem De A6 GMD lasnaad volginrichting wordt gebruikt voor het positioneren en volgen van lasnaden van automatische lasmachines met alle soorten lasnaden waarbij een geleidingsrand aanwezig is die de sensorvinger kan volgen. De inrichting is ontworpen voor standaard ESAB-geleidingen en kan één of twee servomotoren tegelijk aansturen. gt;gt; Esab LAE 800 amp DC-bron De LAE-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poederdek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 18 meter lengte beweging Afmetingen van de kraan zelf: 2800 x 2600 x 3300 mm

gt;gt; Esab A2-A6 procescontroller Selecteerbaar lasproces met vooraf ingestelde lasparameters (geheugen voor 255 parameterreeksen). Constante stroomsterkte of constante draadsnelheid. Zeer gebruiksvriendelijk. gt;gt; Esab LAF 800 amp DC-bron De LAF-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poededek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 16 meter lengte beweging Afmetingen van de kraan zelf: 3200 x 2300 x 4000 mm

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Ethernet switch -compact, industry-compatible switch for mounting on top hat rails -Number: 10 pieces available -Price: per piece -Dimensions: 130/125/H70 mm -Weight: 0.5 kg

Ethernet switch -Type: RS30-1602O6O6SDAEHH06.0.02 -compact, industry-compatible switch for mounting on top hat rails -Number: 4 pieces available -Price: per piece -Dimensions: 130/125/H110 mm -Weight: 0.7 kg

Power converter, power supply, power supply unit, switching power supply, power supply device, switching power supply unit -Manufacturer: Murr Elektronik, Switch Mode Power supply -Type: Eco-Rail-2 5-100-240/24 -Technical data: see photo of the nameplate -Number: 4x switching power supply units available - Price: per piece -Dimensions: 135/50/H130 mm -Weight: 0.7 kg/pc.

This 7-axis Yaskawa Motoman ES165D + rail was manufactured in 2014. It is designed for advanced automation tasks, providing flexibility and precision in various applications. If you are looking to get high-quality automation capabilities, consider the Yaskawa Motoman ES165D + rail machine we have for sale. Contact us for further details.

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor conveyor / rollers Condition: Used Manafacture: Schulz Model: Rollers Total length: approx. 15750 mm overall width: approx. 1055 mm Rollers/ conveying width: approx. 995/ 1000 mm Propulsion: Gravity Plant consists of 7 segments Segment length: approx. 2250 mm Roll diameter: approx. 50 mm Roll spacing: approx. 150 mm Material: Steel Frame height: approx. 65 mm Frame width: approx. 25 mm Includes side guide Price per meter Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading you ...

Guide rail - support rail for shafts, rails -Type: 1050-620-00 -Holes: 6.5 mm -Holes spaced 100 mm -Price: per piece -Quantity: 6 pieces available -Dimensions: 600x50xH23 mm -Weight: 1 kg/piece

Linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped -Rail length: 640 mm -Total width: 37 mm -Rail height: 20/10 mm -Dimensions: in the pictures -Dimensions: 640/37/H20 mm -Weight: 2.1 kg

Dovetail guide wedge bar, linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped for dovetail guide -Rail length: 620 mm -Total width: 31 mm -Rail height: 15/3 mm -Dimensions: 620/31/H15 mm -Weight: 0.8 kg

Dovetail guide wedge bar, linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped for dovetail guide -Rail length: 265 mm -Total width: 21 mm -Rail height: 8/3 mm -Dimensions: 265/21/H8 mm -Weight: 0.2 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, linear guide rail -Guide rail: Linear guide rail, 2 pieces -Rail length: 1450 mm -Rail width: 20 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 1450/40/H18 mm -Weight: 7.3 kg

Indoor crane, crane, crane runway, crane rails, steel girders, medium-width I-beams, double-T-beams, IPE steel girders with manual trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Beam: IPE 240 -Carrier width: 120 mm -Equipment: 1x IPE steel beam, 1x roller chassis, 2x adjustable stops -Load capacity: 1000 kg -Dimensions: 5480/120/H245 mm -Weight: 182 kg

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total

10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Overhead crane construction / rails / double T beam HEB - IPE Construction for bolting together from supports and crane runway rails Supports : 10 x HEB 160 at a height of 3.86 m 4 x IPE 300 at a height of 3.86 m AND Crane runway rails (welded on it with square solid material 30 x 40 mm) for screwing to the supports : 2 x IPE 300 in 13 m length 1 x IPE 300 in 11 m length 1 x IPE 300 in 7 m length For Sale Complete, total weight is about 5 tons. Price 6000 Euro net + 1140 Euro ( 19 % VAT) = 7.140,00 Euro gross VAT can be declared Price includes loaded onto truck. Viewing by appointment Shipping available for an extra charge

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

Ladies and gentlemen at the moment the following offers are available . EAS-Z Wagons Quantity: about 40 pieces. with or without revision. Prices free location: All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The entire process of dismantling and loading as well as transport is carried out at the buyer's own  ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: A used railway locomotive about 3,000 hp for sale. Year of construction young Information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept a ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: A used railway locomotive Built for sale, perhaps also for rent. Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; ...

Ladies and gentlemen, Below you will receive a non-binding offer for railway spare parts for all common railway coaches and railway freight wagons new and partly used: Wheelsets All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. Inte ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: Number: about 30 passenger coaches technical data Passenger coaches 1st year of construction: 1977 to 1981 2. Weight: 33 t 3. Seats: 72, 2nd class 4. Longitudinal racks 5. Length over buffer: 23700 mm , 6. Side length 23400 mm 7. Rotary pin spacing: 17600 mm , 8. Rotating salmon distance: 2700 mm 9. Total axis distance: 20300 mm 10. Wheelset type: YRP and YRF All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, et ...

TURNING ANGLE: 180°, BILLET SIZE: QUADRATE: MAX. 240 MM, SQUARE: MAX. 210 x 250 MM, U & I FORM: MAX. 400 MM, WEIGHT: MAX. 5500 KG,

RAIL LENGTH: 5 - 60 M, CONTINUOUS MEASURING, 6 LASER MEASURING HEADS, SPEED: 1 M/SEC., MODERNISED IN 1992

ULTRASONIC INSPECTION - TESTQMATIC - TYPE: SPA-2N, L=5-60 M, 1 M/SEC., 1988 EDDY CURRENT INSPECTION - MPA - 1989 RAIL PROFIL MEASURING DEVICE - SCHMITZ & SÖHNE AND BSB - 1989 PRODUCT HEIGHT: 95-165 MM, HARDWARE & SOFTWARE