cran used for sale

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

For sale: Workshop crane KR-F50H without ballast filling Specifications: Manufacturer: Meiller (DE)· Metrics: Chassis width 810 mm Chassis length 1330 mm Overall height 1740 mm Chassis width: 810 mm Chassis length: 1330 mm Height/ Boom: - Height of hook boom extended: 3200 mm - Height of hook boom inserted 2400 mm Other: - Wheel Ø 200 mm Polyamide tyres -Load capacity: 500 kg -Load capacity at boom radius kg/mm: 500/830 435/980 370/1130 330/1280 300/1430 275/1580 250/1730 Equipment: 1x Hydraulic hand pump with hand lever and finely adjustable drain valve Chassis securing by foot brake RAL 2000 lacquer (orange-yellow) With minor rear-end collision damage or transport damage. Otherwise like new, never used! NP:4628 Euro

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

Compact and reliable lifting solution for workshops and production environments The BPL Flexiheffer jib crane is an ideal solution for safely and efficiently moving loads up to 150 kg. The crane is designed for intensive daily use and offers a large working range thanks to the smooth jib arm. Technical Specifications Brand: BPL Type: Flexilifter 150‑R4‑L‑1500‑0 Year of construction: 2003 Height 2, 872 mm, width : 500 mm, length 1,878 mm Maximum lifting capacity: 150 kg, lifting stroke 1,500 mm Swing radius: 4,000 mm Construction: Steel column + swing arm Operation: Manual, smooth running Condition: Well-maintained, fully functional Connection: compressed air min. 6 bar, 700 NL/min Key Benefits Safe and ergonomic working with light to medium loads Compact design – ideal for workshops with limited space Smooth swivel movement for fast and accurate positi ...

1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min

TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Adjustable traverse, crane traverse, traverse for pillar slewing crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Carrier dimensions: 360 x 150 mm (narrow I carrier) -Total dimensions: 4240/240/H630 mm -Own weight: 400 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist, crane hook crossbeam, load crossbeam -Manufacturer: Seil Becker, crane traverse -Load capacity: 100 kg -Steel rope: Ø 4 mm -Dimensions: 1015/80 / H440 mm -Net weight: 9.2 kg

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Bearer width: adjustable -Load capacity: kg -Dimensions: see technical drawing in the photos -Dimensions: 240/262/H225 mm -Weight: 12 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Load capacity: 8000 kg -Dimensions: 4070/230/H770 mm -Own weight: 715 kg

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Crank winch, Dunkraft, diamond jack, steel winch -Hexagon socket: 32 mm -with: counterweight -Dimensions: 730/400/H110 mm -Weight: 9.8 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 38.5 m -for electric cable winch -other crane ropes are also available -Weight: 17 kg

1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 20 mm -Length: approx. 50 m -for electric cable winch -other crane ropes are also available -Weight: 71 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 11 mm -Length: approx. 23 m -for electric cable winch -other crane ropes are also available -Weight: 13 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 20 mm -Length: approx. 50 m -for electric cable winch -other crane ropes are also available -Weight: 75 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: 9.5 m -for electric cable winch -other crane ropes are also available Price: per roll -Quantity: 7 rolls available -Weight: 4 kg/piece

2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 24 m -for electric cable winch -other crane ropes are also available -Weight: 12 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 26 m -for electric cable winch -other crane ropes are also available -Weight: 15 kg

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 52.5 m -for electric cable winch -other crane ropes are also available -Weight: 55 kg

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, absolutely Mint double girder crane as crane trolley with 2 elevators, particularly suitable for traverse operation Load approx. 2 x 6,300 = 12,600 kg Span 14,950 mm hook path about 6,000 mm Make steel Year of production/workshop inspection 2002/2016 Crane equipped with Swivel trolley, maintenance stage, split head support for optimal wheel load distribution, radio control working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear about 2.5/10.0 m / min Crane chassis up to approx. 40.0 m / min

1 factory-tested, well preserved steel double girder overhead travelling crane Load approx. 16,000 kg Track width approx. 13,500 mm hook path approximately 3,600 mm Katz gauge approximately 4,200 mm Year of production / workshop test 1990/2016 Crane equipped with double girder trolley and steel drive units suitable for traverse operation, radio control, catwalk and overload protection Working speeds: Hoist CA. 0.6/4.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 4.0/16.0 m / min

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 24 m -for electric cable winch -other crane ropes are also available -Weight: 14 kg

1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min

Capacity 20.000 kg Wingspan approx. 9,450 mm Hook way approx. 23,000 mm Make HEIMANN/SWF Year of production/workshop review 2006/2016 Crane radio control equipped with SWF double girder trolley, Working speeds: Hoist approximately 0.67/4.0 m / min Katz LG 5.0/20,0 m / min Crane chassis up to 30.0 m / min

Now available: NEW Wartsila 8 cylinder L20 crankshaft available from stock (ex Warehouse Bengi NL) Class certificate Price upon request

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 31 m -for electric cable winch -other crane ropes are also available -Weight: 23 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 14 mm -Length: 52.5 m -for electric cable winch -other crane ropes are also available -Weight: 55 kg

4 factory-tested, very well preserved double girder cranes Load approx. 20.000 kg Wingspan approx. 16.650 mm Hook path about 5.000 mm Fabrikat MAN/SWF Year of production/workshop test 1995/2016 Cranes equipped with SWF double girder trolleys with reduced design to minimize the installation height, freely movable floor control Working speeds: Hoist approximately 0.32/3.2 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 16 mm -Length: 22.8 m -for electric cable winch -other crane ropes are also available Price: per roll -Quantity: 5 rolls available -Weight: 24 kg/piece

RECON Part number: 1213 5131 / 1213 5135 GL-test ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Now available: Wartsila 8 cylinder L32 crankshaft RECON All main journals ground to -1,00 mm undersize, crankpins to remain standard size with counterweights with drive gear with Class certificate (DNV) Available from stock (ex. Warehouse Bengi NL) Price upon request

Column jib crane, overhead crane, workstation crane -Load capacity: 250 kg -with chain hoist: Demag type DKUN 1-125 K V1 F4 -Projection: 2310 mm -Total height: 1900 mm -Transport dimensions: 2400/800/H500 mm -Weight: 172 kg

RECON 1st level sanded ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: max. 230 mm -Payload: 3000 kg -Number: 4x drives available -Price: per piece -Dimensions: 390/250/H200 mm -Own weight: 38 kg

Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane -Payload: 1000 kg -Dimensions: 450/210/H90 mm -Own weight: 9 kg

RECON Part number: 1216 0857 = 6.232.0.140.044.6 complete 0.25mm undersize ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

AS crane hooks, frame formwork, pipe slings, shaft ring slings -Load capacity: 1000 kg -Number: 3 claws present -Price: per piece -Weight: 13 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Crane cross member claws: 3 pieces -Crane cross beam claws: to move on the cross beam -Traverse support: 220 mm -Price: complete -Dimensions: 335/180/H350 mm -Own weight: 39 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Carrier width: 90-295 mm -Payload: 1500 kg -Number: 1x drives available -Price: per piece -Dimensions: 590/295/H225 mm -Own weight: 21 kg

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg

---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us