cran used for sale

LENGTH :17200M DOUBLE GIRDER

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Demag Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm Drop: 2000 mm

Abus Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm

Abus Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 5000 mm Drop: 3500 mm

Abus Jib crane 250 kg Kind of: jib crane Capacity: 250 kg Span: 7000 mm

A workshop crane is offered for lifting and maneuvering engines, assemblies, machine components, and heavy workshop parts. Max. lifting capacity: 2000kg, Load capacity per boom position: 2000kg/1700kg/1500kg, Design: mobile and foldable, Min./max. hook height: 175mm/2490mm, Leg height: 208mm, Boom: telescopic, Min./max. boom length: approx. 1295mm/1595mm, Weight: 165kg, Overall dimensions in working position: X/Y/Z: approx. 1900mm/1170mm/2490mm. Inspection possible by appointment.

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Scania DC12 crankshaft reon used+tested and ground for all models Scania DI+DC 12 motors Number: 1743584/2176830/10574410

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

MAN 16V32/40 Crankshaft 2 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition STD size Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Crankcase (engine block) Deutz TBG 620V12K

Sulzer 8ZAL40 S Crankshaft Available in our stock in Turkey Came out of 2015 Sulzer ZAL40S engine Std sized main journals and crank pins Without any cracks or welding Please contact info@fin-marine

HNK HCL 41x14 crankshaft CNC lathe Max. Swing Dia. Over Carriage Ø4,100mm Max. Center Distance 14,000mm Chucking Ø700~2,000 mm Steady Rest Ø510~860mm Max. Loading 160Ton

MAN 7L32/40 Crankshaft Std sized Free of cracks , weldings or oscillation Reports available

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - .ucymachines/ Contact us at - sales@ucymachines

MAN D2066 used crankshafts, pn/ 51.02101-0673 for 1000 Euro / each., Crankshafts have STD sizes and are in perfect condition., Delivered with 3 months warranty.

Traverse for a crane 3t - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Traverse for a crane 3t Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Traverse for a crane 3t Price: 1200 EUR Download PDF Traverse for a crane 3t Size 1145x1940mm Capacity 3000 kg 4 length-adjustable chains terminated with a hook Main hook with adjustable position and lock The traverse has a base on wheels for easy movement Production Pfeiffer, Germany. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our  ...

Mobile crane Battery truck - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Mobile crane Battery truck Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Mobile crane Battery truck Price: 9500 EUR Download PDF Mobile crane Battery truck Device bought from stock, condition as shown in the photos, brand new, only 50 hours of work. Hydraulic drive. Capacity 700 kg Control from the steering wheel or the desktop. Charger included. Smooth speed control, safety button, horn, ignition switch. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do no ...

gt;gt; Esab A6 GMD lasnaad volgsysteem De A6 GMD lasnaad volginrichting wordt gebruikt voor het positioneren en volgen van lasnaden van automatische lasmachines met alle soorten lasnaden waarbij een geleidingsrand aanwezig is die de sensorvinger kan volgen. De inrichting is ontworpen voor standaard ESAB-geleidingen en kan één of twee servomotoren tegelijk aansturen. gt;gt; Esab LAE 800 amp DC-bron De LAE-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poederdek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 18 meter lengte beweging Afmetingen van de kraan zelf: 2800 x 2600 x 3300 mm

gt;gt; Esab A2-A6 procescontroller Selecteerbaar lasproces met vooraf ingestelde lasparameters (geheugen voor 255 parameterreeksen). Constante stroomsterkte of constante draadsnelheid. Zeer gebruiksvriendelijk. gt;gt; Esab LAF 800 amp DC-bron De LAF-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poededek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 16 meter lengte beweging Afmetingen van de kraan zelf: 3200 x 2300 x 4000 mm

with radio remote control Auction-ID: A1-51437-14

Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the

Wall slewing crane DEMAG type KBK 2Demag No. boom: KBK- 982 040 44Demag No. wall bracket : 85104044Year of construction 2000Lifting capacity: 500 kgRadius: 4000 mmSwivel range 270Wall mounting plate: 1170 x 440 mmHeight UK- Boom to OK- Wall bracket: 1000 mmFlange plate Wall bracket to middle Bolt: 270 mmTotal length Flange plate Wall bracket to boom tip: 4330 mm: - Boom profile C-profile rail DEMAG KBK 2- Carriage for C-profile rail DEMAG KBK 2- Original paint yellowWeight 170 kgVery good conditionPrice without

ABUS Indoor Crane 500 kg Description: For sale is a professional, free-standing light crane system from the market leader ABUS (HB-System model series) from 2008. The system is in a very well-maintained, clean condition, comes directly from ongoing operation and is perfect for workshops, locksmiths, automotive workshops or welding workplaces to move loads of up to 500 kg precisely and effortlessly. Technical data & details: Manufacturer crane & hoist: ABUS Kransysteme GmbH Model hoist: Original ABUS ABUCompact Electric Chain Hoist (Factory No. 05 08 0598 / 02) Load capacity: Max. 500 kg (official ABUS marking available on the bridge) Type: Free-standing stud work made of solid I-profile steel girders. No ceiling or wall mounting required! Construction: High-strength screw connections with large gusset plates and additional diagonal struts for maximum st ...

Manufacturer: DART Type: MOBILE 125KG Year of Make: 2007 Net weight approx. 1.1t Condition: used / in working order Chain hoist must be renewed, or replaced, as not permitted (160kg) No testing according to the UVV and DGUV! Offer will only be sent if a complete imprint is provided! Price 2.950 Euro incl. 19% VAT Location Warstein , Germany Reference number M-DAR-1026 DESCRIPTION We offer you a used travelling crane from the manufacturer Dart. Hook travel approx. 2020mm Load capacity 125kg Net weight 1.1t kg Chain hoist not suitable, because 160kg. The chain hoist must be exchanged for a 125kg for continued operation. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your comp ...

Swing boom crane boom crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Built: 2014 New and unused Load capacity permissible load weight max: 25 kg Working radius approx.: 3,000 mm Stroke max: 800 mm Lifting speed max. : approx. 800mm/sec. Energy supply: pneumatic Mounting: Swing boom with stand column Net weight device (with load-carrying equipment): 287 kg Pneumatic working pressure: 6 bar Air quality required for maximum load-bearing capacity: clean, dry and filtered (5 microns) Air consumption max.: approx. 17 Nl/ double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale

Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.

Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used

E-chain hoist, electric hoist, crane STAHL type R 12Fabr. No. 3437532 Year of construction 1979Load capacity: 1250 kgHook travel: 2.4 metresLifting speed for one load train: 8 m/min. Fine lifting speed for a load train: 2 m/min. Lifting speed for two load trains: 4 m/min. Fine lifting speed for two load trains: 1 m/min.2 load trains = 1250 kgEngine power: 1.25 / 0.25 kWNetz connection 380 volts, 50 Hz- without chain bag- trolley carriage for KBK 2 - double girder crane bridge, overhead cranegood condition; used

Viewing by appointment Auction-ID: A1-51065-57

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Indoor crane, crane, crane runway, crane rails, steel girders, medium-width I-beams, double-T-beams, IPE steel girders with manual trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Beam: IPE 240 -Carrier width: 120 mm -Equipment: 1x IPE steel beam, 1x roller chassis, 2x adjustable stops -Load capacity: 1000 kg -Dimensions: 5480/120/H245 mm -Weight: 182 kg

Crane frame 6800 mm This frame for cranes offers you the possibility to attach your crane and a trolley, as well as hanging scales or other hanging lifting equipment A-shaped supports for the necessary stability. Supports: Square tube 80 x 80 mm Double T-beam: 120 x 85 mm Length: approx. 6800 mm Height: approx. 4000 mm Width: 2000 mm Color: Yellow More items - new and used - can be found in our shop! International shipping costs on request!

Scheffer Indoor Crane System 500 kg For sale is a high-quality, fully functional indoor crane system (single-girder overhead crane) from the premium manufacturer Scheffer Krantechnik, equipped with first-class quality components from Demag. The system has a synchronous double hoist (tandem operation) with two independently movable Demag electric trolleys. This design is ideal for lifting long, bulky or heavy goods (such as profiles, pipes or plates) absolutely horizontally and safely at two points at the same time. Technical data for the load capacity & performance: Total lifting capacity of the system: 500 kg (0.5 tons) with simultaneous use of both hoists Load capacity per hoist: 250 kg individually Manufacturer's plate specification: 2 x 2 x 0.125 t (2 hoists in 2-strand operation with a base load of 125 kg each) Crane manufacturer: Scheffer Krantechnik (Leading ...

With ballast Auction-ID: A1-51207-2

Complete construction site package including a Potain Igo 26 self-erecting crane, its generator set as well as various lifting and handling accessories. 1. Potain Igo 26 Crane Brand: Potain / Manitowoc Crane Group Model: Igo 26 Type: Self-erecting crane / self-erecting tower crane Year indicated on plaque: 2008 Maximum deflection: 26 m Hook height: up to 20 m Maximum lifting capacity: 3,200 kg Boom end capacity: up to 1,100 kg Chassis transportable on axle Recessed/folding boom technology CE marking 2. Atlas Copco Generator Set Brand: Atlas Copco Model: QAS 30 KDS Year: 2008 Meter indicated: 9,050 hours Fuel: Diesel Rated power: 30 kVA Active power: approx. 24.1 kW indicated on the plate Voltage: 400 V Frequency: 50 Hz Rated Current: 43.6A Power Factor: 0.8 Indicated noise level: 91 dB LWA Weight indicated on the plate: 1.100 kg The QAS ...

Maximum capacity 1,800 kg Power supply control 12 V Hydraulic controls + visible radio control Flatbed truck mounting Crochet Yes CE marking: Yes Auction-ID: A3-46111-35875

Hoffmann rail crane, track 1m, telescopic crane extension 16m, lifting load 16t, electric overhead drive, or MAN diesel engine. Weight approx. 45t. For questions 0049 1604444300 net price 12.500,-€

SUB: FOR SALE... NEW UNUSED CRANK SHAFT ONE SULZER 12 ASV 25/30 AT TURKEY HAVE A GDY SIR WE VE NEW UNUSED CRANK SHAFT OF ONE MAN 12V 25 / 30 (SULZER 12 ASV 25/30) AT OUR STOCK. THIS CRANK SHAFT SUPLIED VIA MAN DIESEL TURBO WE VE ADDATIONALY NEW FULL 1 COMPLETE SET BEARINGS. AND COUNTER WEIGHTS PLS FIND SPEC AT BELOW. SERIAL NO.: 1102209020 (206061045) GRANTHALAYA.ORG NO: 020.08.K. DRAWING NO: 055/057/059/ 221 APROVED VIA: LLOYDS TYPE: ONE 12V 25/30 (SULZER ASV 25/30) READY TO DELIVER. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

MWM TBG 234-V12, MWM TBD 234-V12 2 piece crankshaft, recon incl. gear and counterweights TN: 1216 3119 / 6.234.0.140.016.6 1st stage Price/piece: € 4,250.00 (ex works) Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Crankcase complete