cramer used for sale

Feeder Double printing Crabtree Marquess UV oven Maber Coater Oven of 27 m and 6 m of coolers New PLC control for machine Chain and wickets new New exit table Inghor New transition system Non stop stacker LTG Sizes 1140 x 960 mm.

Article number: 27-01-176 Manufacturer: Craft Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1988 L x W x H: approx. 2800x1200x2000mm Weight: approx. 320kg Load capacity: see pictures Permissible total weight: approx. 2230kg Grid load capacity: 4 pieces Accessories: Movable base frame Load hook Other accessories on request Price and other technical data on request

Large amount of crates and buckets.

9 plastic crates, dimensions: (9x) 730 mm x 530 mm x 200 mm.

Crathern & Smith / Perondi fully automatic rigid box making line Make Crathern & Smith / Perondi Model IA630 Year 1989 Blank size min: 100 x 120 / max: 450 x 880 mm Cover material weights 80-140 grams Box size min: 50 x 125 / max 400 x 600 mm Box height 12 to 120 mm Speed up to 36 pcs a minute Configuration Crathern & Smith / Perondi IA630 feeding + gluing of cover material Crathern & Smith / Perondi TS600 4/corner stayer for the board material Crathern & Smith / Perondi PA600 spotter by sensors Crathern & Smith / Perondi SV80 wrapper Crathern & Smith / Perondi MC80 warm glue meltiong pot with viscocity device Example boxes luxery boxes, games, phone boxes, and many more Make Barmedia details 2 heads, adjustable by hand wheel, for both cover material to make the blanks and for the inner board material to cut out the corners Available Direct

Manafacture: Eco Cranes Dimensions: 1200 x 900 x 1000 mm Range of motion: 0° - 30°

C&S Crathern & Smith- rigid box machines 2 machines sets for bottom and cover in one production cycle 2 x automatic gluing machines: CSG-1 2 x thermoplastic quad stayer QA-200 2 x automatic vision box spotter CSV-1 year 1997

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

turning diameter over bed: 1800 mm turning diameter over slide rest: 1370 mm turning length: 8000 mm turning speeds: 2-97 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table diameter: 2140 mm Turning diameter: 2200 mm Turning height: 1000 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   SPECIFICATIONS Max. turning diamter Ø  2200 mm Table / chuck size Ø  2140 mm Workpiece height  1000 mm Work piece weight  500 Kg Horizontal movement support / ram  2 x support mm  

- Table size: 560 x 520 mm - Working height: 920 mm - Total power: 1 kW - Machine weight: 120 kg - Dimensions (W x D x H): 0.72 x 0.53 x 1.04 m Details Circular saw for wood / plastic, table / cabinet made of aluminum profiles, under-table with door, stop / guide

Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Nominal consumption: 500 W -Drilling/hammer drilling -Speed: 0 - 2200 rpm -Dimensions: 290/80/H200 mm -Weight: 2.2 kg

This portal crane can be moved all over your workshop floor thanks to the pneumatic hovering system, the requirement to be able to use this is that the floor needs to be perfectly smooth. Max height under lifting hook: 2000 mm Lifting capacity: 5 ton Kind of: portal crane Capacity: 5 ton Span: 4 meter Drop: 2 meter

all movements are motorized 1 ton chain hoist

Used Bodini Crate Washer up to 800 Crates per Hour Efficient Crate Handling with Flipper Mechanism of the Crate Washer Bodini up to 800 crates par hour Renowned for efficiency the Bodini crate washer employs a specialized flipper mechanism Consequently crates are properly oriented for washing reducing manual labor Furthermore this feature enhances productivity by minimizing errors in operation Versatile Design for Various Crate Formats of the Crate Washer Bodini up to 800 crates par hour Flexibility is a hallmark of the Bodini crate washer Thanks to its versatile design the washer adapts to various crate heights This adaptability ensures seamless integration into existing bottling lines Consequently businesses can optimize operations effectively Dual Cycle Washing for Optimal Cleanliness To ensure optimal cleanliness the Bodini crate washer utilizes a dual cycle washing system During the ...

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

Assembly crane, Industrial crane, Workshop crane, Mobile crane, Gantry crane, Crane (used) Manufacturer: Eisenwerk Weserhütte A.G Width min: 1500 mm Width max: 2150 mm Lifting height min: 960 mm Lifting height max: 4000 mm Load capacity: 2000 kg Weight: approx. 900 kg Projection: 1680 mm Length: 3000 mm Width: 1500 / 2150 mm Height: 2850 mm Lifting and lowering device manually by hand pump The crane is in good condition and ready for immediate use. Forklifts available, freely loaded trucks Shipping by freight forwarder possible Location of the machine 48324 Sendenhorst If you have any questions 015735496006 The price is net plus 19% VAT.

Single-Girder Bridge Crane, Bridge Crane, Overhead Crane with Track, Bridge Crane with Electric Chain Hoist, Portal Crane; Used Machine Manufacturer: S+V 98 Ltd Type: DP-013-3200-400-800 Year: 2013/05 Last Inspection: 2023.03 Capacity: 3.2 tons Bridge Crane with Electric Chain Hoist: Width: 4000 mm Span: 3800 mm Weight: 1950 Kg Capacity: 3200 Kg Lifting Height: 2900 mm Trolley: Yale With Wired Remote Control Electric Travel and Lifting Crane Track: Length: 8220 mm Width: 4000 mm Height: 3800 mm Profile: HEA 220 Lifting Height: 2900 mm Span: 3800 mm

Suspended crane runway crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead conveyor with monorail Crane bridge Light crane system made of KBK modular system profiles Load capacity: 125 kg Span: 5 meters Distance longitudinal rails: 4.1 meters Longitudinal member length complete: 12 meters Girder profile cross beam = KBK1 Carrier profile longitudinal track = KBK1 Consisting of: 29 meters system profile KBK-1 (4x 6000 mm + 1x 5000 mm) 1 piece carriage for the Crane suspension 2 pieces Double carriage for the longitudinal rails 10 pieces screw claws for crane suspension or ceiling mounting (without carrier clamps) 6 pieces End cover suitable for the track KBK1; used

Intermediate plate for pillar slewing crane, crane foundation plate, indoor crane, workplace crane, crane foundation plate -Pillar slewing crane: intermediate plate/base plate, outside: Ø 1200 mm -Type: ST160 VP1200/DL530 422632 S235 JR -Thickness: 40mm -Bolt circle inside: Ø 530 mm -Outer bolt circle: Ø 1160 -Number: 2x foundation plate available -Price per piece -Weight: 388 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist, crane hook crossbeam, load crossbeam -Manufacturer: Seil Becker, crane traverse -Load capacity: 100 kg -Steel rope: Ø 4 mm -Dimensions: 1015/80 / H440 mm -Net weight: 9.2 kg

Manual trolley, push trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, girder trolley, overhead trolley -Crane trolley: with electric chain hoist -Crane trolley: Demag gearbox type KS 7 motor 0.07 / 0.3 kW -Chain hoist: steel type ST 3216 - 12/3 2/1 -Load capacity: 3200 kg -Chain speed: 3/12 m / min -Lifting height: 6200 mm / 6500 mm -Number: 2x crane trolleys available -Price per piece -Dimensions: 1900/1500 / H1000 mm -Net weight: 375 kg

Intermediate plate for pillar jib crane, crane foundation plate, indoor crane, workplace crane, crane foundation plate -Pillar slewing crane: intermediate plate / base plate, outside: O 1050 mm -Thickness: 40mm -Hole circle inside: O 530 mm / M27 thread -Pitch circle outside: O 1010/15 mm -Net weight: 218 kg

Bridge crane, hall crane, assembly crane, workplace crane, ceiling crane system -without chain hoist (available for an extra charge) -Load capacity: 1000 kg -Span width: 3100 mm -Crane length: 4100 mm -Helmet rails -Interior height of the profile: 65 mm -Inside width of the profile: 70 mm -Transport dimensions: 4140/450/H250 mm -Own weight: 180 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Crane cross member claws: 3 pieces -Crane cross beam claws: to move on the cross beam -Traverse support: 220 mm -Price: complete -Dimensions: 335/180/H350 mm -Own weight: 39 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Crane cross-member claws: 2 pieces -Crane cross beam claws: to move on the cross beam -Traverse support: 220 mm -Price: complete -Dimensions: 335/180/H350 mm -Own weight: 26 kg

Indoor crane, crane, electric rope hoist, hand trolley, roller trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, carrier trolley, monorail trolley -Manufacturer: steel, crane chassis with electric cable pull -Cable: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

Crane motor, travel drive Crane bridge drive with gearbox Sliding anchor motor, Schuer motor, three-phase electric motor, brake motor, crane motor, wire rope hoist drive, crane drive, hoist motor, fine lift motor Manufacturer: DEMAG Motor Type: 24/10 KF8-2 Motor No.: 982869 Motor Design: B5 Nominal voltage: 380 VAC Nominal frequency: 50 Hz Power level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm. with gearbox DEMAG type KS 12 reduction gearbox Fabr. No. 1909104 Gear ratio: i = 118 with impeller for crane track 2 pieces available, price indication per piece; used

Wall slewing crane, hall slewing crane, hall crane, workplace crane -Manufacturer: Abus, wall slewing crane type LW, load capacity 125 kg -Throat: 2000 mm -Swivel range: 270° -Chain hoist: ABUS type GM 2 125.8-1 -Lifting speed: 2.00/8.00 m/min -Chain length: 3.16 m -Transport dimensions: 2165/740/H300 mm -Weight: 86 kg

Adjustable traverse, crane traverse, indoor crane, workplace crane, crane hook traverse, load traverse, leveling traverse, beam traverse -Manufacturer: Pfeifer, crane traverse for transporting a wide variety of loads -Type: 04.315.063.063 -Load capacity: 6300 kg -Length: 6410mm -Dimensions: see photo techn. drawing -Total dimensions: 6410/480/H960 mm -Own weight: 505 kg

Adjustable traverse, crane traverse, indoor crane, workplace crane, crane hook traverse, load traverse, leveling traverse -Crane traverse: H traverse, adjustable -Load capacity: 5 t -Load hooks: 4 pieces with sheet metal claws clamping range 0 - 60 mm, see photos -Hole spacing: 200mm -Dimension.: 4920/1700/H550 mm -Own weight: 650 kg

Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar jib crane, indoor crane, workstation crane, chain hoist -Manufacturer: GT-Hebetechnik, crane traverse for the transport of various loads -Load capacity: 8000 kg -Distance between hooks: min. 1000 mm / max. 2500 mm -Steel rope: O 22 mm, length 1600 mm -Dimensions: 2620/360 / H890 mm -Net weight: 304 kg

Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar slewing crane, indoor crane, workstation crane, chain hoist -Crane cross member: adjustable, for the transport of different loads -Load capacity: 6500 kg -Hook spacing: min. 1460 mm / max. 2880 mm -Steel rope: O 22 mm, length 1580 mm -Dimensions: 3025/190 / H945 mm -Net weight: 230 kg

Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar jib crane, indoor crane, workstation crane, chain hoist -Manufacturer: Weidner & Lahr, crane traverse for the transport of a wide variety of loads -Load capacity: 2000 kg -Hook spacing: min. 780 mm / max. 1800 mm -Steel rope: O 18 mm, length 1100 mm -Dimensions: 2025/120 / H780 mm -Own weight: 120 kg

Wall jib crane, indoor jib crane, indoor crane, workplace crane -for: spot welding gun -Outreach: 4000 mm -Total height: 1100mm -Swivel range: 270° -with: Crane chassis and cable trailing shoe -Dimensions: 4000/100/H1100 mm -Transport dimensions: 4000/200/H150 mm -Own weight: 100 kg

DEMAG 3.2 t / 15 m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Year of construction: 2012 Type: EPKE Cat type: EK DR-Pro 3 - 3,2 Crane classification : DIN 15018 H2 B3 Radio control : KB, radio RC10 (two radio remote control available) Wingspan : 15022 mm Chassis (sides): 2956 mm, are mounted Load capacity : 3200 kg Weights : approx. 3258 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Wall slewing crane, hall slewing crane, hall crane, workplace crane -Manufacturer: Abus, wall slewing crane type VW, load capacity 1000 kg -Throat: 5230 mm -Swivel range: 270° -Chain hoist: ABUS -Lifting speed: 1.30/5.00 m/min -Chain length: 3.35 m -Transport dimensions: 5300/1450/H1320 mm -Weight: 750 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Traverse can: be picked up by crane -a traverse with: two adjustable hooks -Load capacity: 2000 kg -Multiple adjustable traverse: for the transport of various loads -Max. Traverse support: 2000 mm -Transport dimensions: 2045/200/H340 mm -Own weight: 77 kg (Price with a new coat of paint 900 euros VAT)

Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 1000 kg year of manufacture 1985 -Documents: crane inspection book, operating instructions, -Base plate: Ø 685 mm -Projection: 4,390 mm -Total height: 4,350 mm -Hook height: 3,140 mm -Chain hoist: DEMAG type PK5N with main stroke 5 m/min, built in 1973 -Chain length: 3300 mm -Transport dimensions: 950/4630/H1890 mm -Own weight: 1160 kg

Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 500 kg -Documents: crane inspection book, operating instructions, -Base plate: Ø 710 mm -Projection: 3045 mm -Total height: 4,075 mm -Hook height: 3,305 mm -Chain hoist: DEMAG type DKUN5-500KV1F4 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Chain length: 3300 mm -Transport dimensions: 3850/810/H1110 mm -Own weight: 720 kg

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

SUB: FOR SALE... DEUTZ BA 8M 528 USED CRANK SHAFT ONE YEAR 2000 AT TURKEY HAVE A GDY SIR WE VE USED DEUTZ BA 8M 528 CRANK SHAFT AT TURKEY.. CRANSHAFT MEASURMENTS IN STANDART SIZE LIMITIS CRANK MANUFACTURE YEAR IS 08/2000 WITH STAMPED GL –BV-DNV PART NUMBER 02058977VA 0187-05/8 MAIN / CON ROD MEASURMENT 188.97/158.93MM CRANK IS READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, absolutely Mint double girder crane as crane trolley with 2 elevators, particularly suitable for traverse operation Load approx. 2 x 6,300 = 12,600 kg Span 14,950 mm hook path about 6,000 mm Make steel Year of production/workshop inspection 2002/2016 Crane equipped with Swivel trolley, maintenance stage, split head support for optimal wheel load distribution, radio control working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear about 2.5/10.0 m / min Crane chassis up to approx. 40.0 m / min

1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min