312 offers

Category: 105: saws
New in: 1991
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Saw blade diameter 420 mm -Blade hole 30 mm -Max cutting length 6000 mm -smallest cutting length 90° + 45 ° 335 mm -See diagram below cutting area -Swivel range to inside pneumatic 90-22.5 ° - tilt range inside pneumatically 90 - 45 ° -Blade rotation speed 2800 RPM -Drive: 400 V / 2 x 4000 Watts -Compressed air supply 7 bar -Air consumption per work cycle - no spray approx. 40 l -with spray approx. 64 l -Space requirement approx. B H 7500 x 1600 X 1600 mm -Weight approx. 1800 kg -by: - cutting-length adjustment with position control - saw unit swivel and tilt for high and wide profiles,. -as well as miter cuts possible, 22.5  ...

Category: 502: presses
New in: 1991
Price: request quote
Location: Land-ru RU Russland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 100 Year of construction 1991, 2017 overhauled Hours of operation 40,586 hours Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 m³ Theoretic cycle time 22 sec. Bale size 750 x 1,100 mm, length variable Driving motor 2 x 30 kW Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm up to 12 tons/h bulk weight of 50 kg/cbm up to 25 tons/h bulk weight of 100 kg/cbm up to 47 tons/h Bale weight 550 up to 850 kg, depends on material Volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., typ ...

Category: 106: presses
New in: 1996
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

Trumpf Machine Name : CNC Press Brakes Manufacturer : Trumpf Model : Trumabend V85 S Location : Mumbai Year Of Manufacturing : 1996 Technical Specification: Control: Delem Capacity:85 Tons Bending length: 2550mm Open height: 365mm Stroke length:215mm Throat depth: 410mm No. Of Axis: 6

Category: 106: presses
New in: used
Price: request quote
Location: Land-sw SW Hassleholm
Seller: Hilco

Year approx. 1973 with Coil Feed Unit APT with Press control.​Stroke 300mm; Cushion 150 ton and stroke 200mm

Category: 104: grinding machines
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

Wickman Machine Name : Centreless Grinder Manufacturer : Wickman Location : Mumbai Technical Specification: Make: Wickman Capacity: 125mm

Category: 104: grinding machines
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

GIUSTINA Machine Name : Centreless Grinder Manufacturer : GIUSTINA Model : 300 Location : Mumbai Technical Specification: Capacity: 300mm

Category: 104: grinding machines
New in: 1969
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

ESTARTA Machine Name: Centerless GRINDING Manufacturer: ESTARTA Model: 310 Location: Mumbai Year Of Manufacturing: 1969 Technical Specification: Work Capacity: 76.2 mm Grinding Wheel Dia: 355.6 mm GW Power: 11.2 kW Regulating Wheel Dia: 254 mm RW Power: 0.7 kW RW RPM: 310 rpm

Category: 832: post press: folders
New in: 1992
Price: request quote
Location: Land-nl NL 2105 Heemstede, Herenweg 29E
Seller: ITK Graphic Machinery

Folding machine Stahl Model T50/4K Year 1992 Sheet size 500 x 850 mm Buckles 4 Knives 1 knife Details with noisehoods, flatpile feeder, EVZ11 batch counter, belt delivery, pump Available direct

Category: 832: post press: folders
New in: used
Price: request quote
Location: Land-es ES
Seller: ICD

ROTARY Feeder ( new belts) Digital counter 4 POCKETS FIRST UNIT (complete new rollers) 4 POCKETS SECOND UNIT (complete new rollers) 2 POCKETS THIRD UNIT (complete new rollers) Shingle belt delivery Very good conditions Complete cleaned, prepared and checked, ready for test Available immediately

Category: 832: post press: folders
New in: 2006
Price: request quote
Location: Land-de DE 55120 Mainz, Westring 283
Seller: Raoul Acakpo Oura

Rundstapleraleger with folding unit Infeed width: 82 cm Serial No.: FH. HAC0-00759

Category: 106: presses
New in: 2002
Price: request quote
Location: Land-de DE Neunkirchen
Seller: Hilco

Fabr.-No. F1011F, working width max. 1,000 mm, Cap. 500 kN, stroke max. 215 mm, operating pressure max. 290 bar, follow-up time 54 ms, equipment: CNC backlash, 4-axis, laser safety device, control, make Delim, type DA69 DE: CNC-Abkantpresse (5302), Fabr. Trumpf, Typ TrumaBend V50, Bj. 2002, Ser.-Nr. B0101A0006, Fabr.-Nr. F1011F, Arbeitsbreite max. 1.000 mm, Presskraft max. 500 kN, Hub max. 215 mm, Betriebsdruck max. 290 bar, Nachlaufzeit 54 ms, Ausstattung: CNC-Hinteranlschlag, 4-achsig, Laser-Sicherheitseinrichtung, Steuerung, Fabr. Delim, Typ DA69

Category: 106: presses
New in: 2008
Price: request quote
Location: Land-de DE Neunkirchen
Seller: Hilco

Mfg.-No. F1031F, width max. 4,000 mm, Cap. 2,300 kg, stroke 445 mm, pressure max. 300 bar, Speed max. 95 m/s, machine weight 19,200 kg, CNC-controlled backgauge, 6-axis, autom. Bending aid, laser safety devices, control Trumpf type TASC 6000, operating hours 26787. DE: CNC-Abkantpresse, Fabr. Trumpf, Typ TruBend 5230, Bj. 2008, Ser.-Nr. B0508A0153, Fabr.-Nr. F1031F, Arbeitsbreite max. 4.000 mm, Presskraft max. 2.300 kg, Hub max. 445 mm, Betriebsdruck max. 300 bar, Nachlaufzeit max. 95 ms, Maschinengewicht 19.200 kg, Ausstattung: CNC-gesteuerter Hinteranschlag, 6-achsig, autom. Biegehilfe, Laser-Sicherheitseinrichtungen, Steuerung, Fabr. Trumpf, Typ TASC 6000, abgel. Betriebsstd. MAschine e ...

Category: 106: presses
New in: 2008
Price: request quote
Location: Land-de DE Neunkirchen
Seller: Hilco

Mfg..-No. F1022F, width max. 2,000 mm, Cap. 850 kN, stroke max. 215 mm, operating pressure max. 300 bar, follow-up time 95 m/s, machine weight 7,300 kg, CNC-controlled backgauge, 4-axis, safety light barrier, control Trumpf type TASC6000, operating hours 34212 DE: CNC-Abkantpresse, Fabr. Trumpf, Typ TruBend 5085, Bj. 2008, Ser.-Nr. B0502A0383, Fabr.-Nr. F1022F, Arbeitsbreite max. 2.000 mm, Presskraft 850 kN,Hub max. 215 mm, Betriebsdruck max. 300 bar, Nachlaufzeit 95 ms, Maschinengewicht 7.300 kg, Ausstattung: CNC-gesteuerter Hinteranschlag, 4-achsig, Sicherheitslichtschranke, Steuerung, Fabr. Trumpf, Typ TASC6000, abgel. Betriebsstd. Maschine ein 34212, Laufzeit Hydraulik 16564, Laufzeit  ...

Category: 832: post press: folders
New in: 2005
Price: request quote
Location: Land-de DE 47809 Krefeld, Roemerstr.22
Seller: YUKE

4 pockets 2 sword HHS gluing system

Category: 107: sheet metal working
New in: 2010
Price: request quote
Location: Land-de DE Bayern / Deutschland
Seller: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple

Make: Trump card Type: TruLaser 5030 Year of construction: 2010 Hours of operation: 19.200 / 42.100 (as of 03/2019) Resonator TruFlow 6000, laser power: 6000 Watts Control: Siemens Sinumerik 840 d Working range: 3000 mm x 1500 mm x 115 mm â?¢ Closed machine frame with integrated laser unit â?¢ Bewegunseinheit for high-precision machining â?¢ Automatic pallet changer â?¢ A cutting head strategy â?¢ Longitudinal conveyor for small parts/waste â?¢ Maintenance-free Turbo centrifugal blower â?¢ Drives: Gantry drive in combination with direct linear drives â?¢ Laser cutting head with a 250 mm le ...

Category: 1009: excavators
New in: 2009
Price: request quote
Location: Land-at AT
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Fabrikationsnr.: CAT3025CLGBB03603, serial #: 0154635, 18.6 kW, BJ: 2009, 2,745 kg, version: rubber tracks 300 x 52. 5WX, Dozer blade B approx. 1,500 mm, handle incl. Hammer piping, including digging bucket B approx. 450 mm, read operating hours: approx. 3.760 h,. CAB protection open with lighting

Category: 832: post press: folders
New in: 2000
Price: request quote
Location: Land-uk UK Oxford
Seller: I.E.S. (Scotland) Limited

Machine number 251034 – 293720 Digital controlled combination folder DCT 500 control system with intelligent sheet learning facility Flat pile feeder with Tremat suction feeder head Electromechanical 2 sheet detection 4 buckle plates Noise hood Perf and scoring shafts 2nd mobile unit Machine number 25075-288724 4 buckle plates Noise hood Perfing and scoring shaft Inbuilt KBK 52 knife folding unit : machine number 250840-288731 SAK shingle delivery

Category: 832: post press: folders
New in: 2004
Price: request quote
Location: Land-de DE
Seller: LA-POSTPRESS Landauer Alexander

3 MONTHS LA POSTPRESS WARRANTY Excluding electronics Offer consists of: Horizon AFC-544 Act 4 - Pocket folding machine -Technology: Touch & work -Memory types of folds: 17 pre-programmed standard folding types -Order memory: 200 memory locations for repeat orders -Number of pockets / swords: 1st Folding Unit: 4 bags + sword 2. Folding Unit: 2 bags -Sword: fully automatic -Format: Max 540x760mm; min. 120x172mm -Folding length: 1 bag: min. 58 mm all other bags: min. 35 mm -Paper weight: 40-250 g / m² -Load capacity: 650 mm -Performance: maximum 40,000 cycles/h -Electricity: 400V/60 Hz - 2, 5kW -Dimensions: 2.700 x 1.050 x 1. 650mm (witho ...

Category: 832: post press: folders
New in: used
Price: request quote
Location: Land-de DE
Seller: LA-POSTPRESS Landauer Alexander

AVAILABLE FROM APRIL 2019 Comprising: 4 - Pocket folding machine shed delivery Facilities: -Flat-pile feeders Technical details: -Working width: 52 cm -Format: min. 10x15cm; Max 52x84cm -Maximum speed: 180m / min -Electricity: 3x400V / 50 Hz On request, we can organize for you the following points: Packing, loading, transport (by ship or airplane) including customs clearance

Category: 1009: excavators
New in: 2010
Price: 30.000 €
Location: Land-uk UK LE10 Wolvey, Cloudsley Bush Lane
Seller: Machinery World LTD

2010 TEREX TC125 MAKE & MODEL TEREX TC125 Year 2010 Running hours 1932 Load capacity --- Type tracked excavator Condition USED EQUIPMENT DETAILS: CONFIGURATION: SERIAL NUMBER: TC01250490 WEIGHT: 12.8 Tons BUCKET - Bucket: No - Cylinder: ok QUICK COUPLER - Type: Hydraulic - Brand / Model: Lehnhoff SWE MS08 STICK - Stick length: 2 m - Steel condition: ok - Welded: ok - Fishplated: ok - Cylinder: ok - Pins & bushings: imperfection ? Medium play AUXILIARY HYDRAULIC - Number of auxiliary hydraulic lines: Unit equipped with two aux. hydraulic lines BOOM - Boom type: Swingaway boom - Steel condition: ok - Welded: ok - Fishplated: ok - Cracked: ok - Cylinder: imperfection ? Boom cylinder ...

Category: 210: window production machines
New in: 1980
Price: request quote
Location: Land-de DE 37242 Bad Sooden-Allendorf, Werrastr. 20
Seller: Wilhelm Bachmann GmbH & Co.KG

Engine 2 x 3 kW Aggregate adjustment 0-45 ° Pneumatic clamping cylinders front + upper Electr. Aggregate adjustment right + left Spraying device pneumatic cutting of material, feed maximum cutting length 4000 mm Height approx. 200 mm 2-hand operation Lubrication / cooling

Category: 832: post press: folders
New in: 2001
Price: 7.500 €
Location: Land-ua UA Kiev
Seller: 4print

Size 500 x 760 mm fully automatic working Folder 1. Unit 4-buckles 2. Unit 2 knife electr. doublesheetcontol, counter mobile delivery Window folder unit

Category: 104: grinding machines
New in: 1975
Price: 8.900 €
Location: Land-de DE Thüringen
Seller: WTS Maschinenhandels KG

Maximum work-piece clamping diameter 140 mm Maximum work-piece clamping length 250 mm Grinding hole length 160 mm Grinding diameter 0.8 90 mm Maximum work-piece weight 15 kg Centre height 90 mm Workpiece spindle speed continuously 112-1000 min-1 Range of work piece headstock 50° on both sides Inside taper of the workpiece spindle MK 4 Speed loop lockers 10000-175000 min.-1 Delivery 0.001 - 0.01 mm Space requirements: 2800 x 2500 mm Power requirement kW HF Converter 3.8 Weight, including RF-transducer 1450 kg

Category: 832: post press: folders
New in: 2009
Price: request quote
Location: Land-uk UK BH243 Ringwood, The Stables, The Stables,
Seller: Jerry Curtin Limited

MB Multimaster CAS 52/4 SRT-l This machine will go on the back of a Digital press Auto matice machine for The computer-control for folding machines, invented by MB Bäuerle, makes manual settings almost unnecessary. By just pushing a button, fold lengths are calculated automatically, paper stops are adjusted, fold jobs are saved in the memory and the recommended roller gap is indicated. Set-up times are reduced by more than 50 %, the workload on skilled personnel and waste are reduced. The result are lower costs and more flexibility. The modular design makes various extensions and individual combinations possible.

Category: 832: post press: folders
New in: 1990
Price: request quote
Location: Land-za ZA
Seller: Jerry Curtin Limited

We are pleased to offer: Heidelberg/Stahl KC78 4KZ R- RC Folding Machine, Year 1990 Machine Number: 32249, Serial Number: 127100. 32 Page with Electronic Knife, Continuous Feeder, Noise Hoods and Batch counter. Good condition Available Immediately.

Category: 201: saws
New in: 2007
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-stock machine, CE -After reviewing the technical -Manual in Polish -year of manufacture 2007 TECHNICAL PARAMETERS: -Cutting height: 300 mm -Cutting width: 508 mm -The minimum Strip thickness: 6 mm – Maximum Strip thickness: 30 mm -Belt length: 3820 mm -Table size: 530 x 530 mm -Change the position of the table: 45 ° to-10 ° -Stop function at angle: 90 ° -Working height: 930 mm -Working height: 930 mm -Diameter: 520 mm Blade speed: 1000 m/min -Size saws: 900 x 1100 x 197 -The power of the actual motor 400 V: 3 KM/S1 100% -Rated engine power 400 V: 5.7 KM/S6 40% -Weight 230 kg Basic equipment -Suction Pipe for Wed. 100 mm -Tape 20 mm saw blade ...

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

-with relevant tools to the stretch + press +. -cut out of sheet metal bent up -Material thickness painting galvanized sheet metal up to 1.5 mm -Stainless steel sheet up to 1.0 mm material thickness -Thickness aluminum sheet up to 2.0 mm -RADIUS horizontal 75 mm -Vertical projection 60 mm -Working stroke 6 mm -1 St. ASW 42 to the notching of cutting tool by -Triangle - and square cut-outs to a max depth - of 40 mm and 1.5 mm steel - working height adjustable in height -Space requirement approx. B H 400 x 1300 x D 600 mm -Weight approx. 25 kg

Category: 832: post press: folders
New in: used
Price: 2.500 €
Location: Land-de DE 72555 Metzingen Mühlstr 16
Seller: Herr thienlan

Steel VSA 66 D MKE.

Category: 832: post press: folders
New in: 2006
Price: 12.000 €
Location: Land-ua UA Kiev
Seller: 4print

Max. sheet size 740 x 1040 mms Min. sheet size 150 x 190 mms Round pile feeder,   4 pockets, 2 knife, Delivery, Desta BAS pressing unit, 2006 In production, available now

Category: 201: saws
New in: 2001
Price: request quote
Location: Land-de DE 32549 Bad Oeynhausen, Zur Bauernwiese 12
Seller: V. Grum-Schwensen GmbH

Engine: 2 x 2,2 kW -1 set of horizontal clamps -1 set of material supports

Category: 110: accessories for machine tools
New in: used
Price: 129 €
Location: Land-de DE 46047 Oberhausen
Seller: Lippke Industriedienstleistungen

ROLLON NT18 Guide rollers The article was kept as a spare part and is unused.

Category: 832: post press: folders
New in: 2003
Price: 14.500 €
Location: Land-ua UA Kiev
Seller: 4print

4 pockets 2 knifes Stahl RI-55 round pile feeder SAK 56 delivery Tremat feeder

Category: 105: saws
New in: 2012
Price: 10.000 €
Location: Land-at AT 8045 Graz , Statteggerstrasse 111
Seller: Herr Michael Posch

Provide here a little used Elumatec DG 79 + E111 map. BJ. 2012 Description: Solid cast iron construction ensures a flawless profile support for accurate angle cutting with integrated rotary table Swivelling range of the saw heads from 0 ° to 45 ° adjustable left and right adjustable. This foreign and InnenmaÃ?zuschnitte possible Vertical and horizontal pneumatic material clamping devices ensure optimum fixation of profile Standard saw blades Standard with digital display E 111 Dosiersprueheinrichtung Technical data: Smallest cutting length at 90 ° 520 mm Smallest cutting length at 45 ° tilted 520 mm Locking points at 15 °, 30°, and 45° Swivel range of 0 ° to 4 ...

Category: 204: grinding machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition TECHNICAL PARAMETERS: -maximum width grinding 1100 mm -maximum height 160 mm -the minimum height of the grinding 3 mm -main engines 2 x 11 kW -feed motor 2.2 kW -height adjustment Motors 0.37 kW -1 rubber shaft 65 shore a diameter 270 mm -2 shaft rubber 45 shore with a diameter of 400 mm -dimension of belts 2600 x 1050 mm -two types of feed rate -oscillation of pneumatic kra?cówkach -diameter 2 x 150 mm -tape in good condition Overall dimensions of the machine: -length: 280 cm -width: 180 cm -height 250 cm -weight ~ 2600 kg

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Seller: Hagen Busch Maschinenhandel

The machine can be visited at us like in the camp. Manufacturer: Binmak Country of origin: Turkey 2019. Work range approx. 1050 x 4, 0 mm Round rollers mind up to 4 mm up to 5 mm possible before bending. the rollers are hardened to the conical rollers with foot pedal Electrically approx. 2.2 kw Weight approx. 895 kg Roll diameter: 110 mm Engine with cast iron housing Side swing-out top roller Main motor with brake With wheel up and down moving behind and front roll, Separate from the machine, mobile control panel and foot pedal Emergency stop

Category: 104: grinding machines
New in: 1975
Price: request quote
Location: Land-de DE
Seller: Maschinenhandel Kmet

Year of construction: 1975 Work piece clamping diameter: 140 mm Clamping length: 250 mm grinding bore length: 160 mm schleifbarer bore diameter: 0.8 90 mm Workpiece weight: 15 kp Tip height: 90 mm Workpiece spindle: 112-1000 rpm. More info on request!

Category: 106: presses
New in: 1995
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

1380mm x0.2mm Aluminium Cold/Hot Rolling mills Make:Korean Manufacturing Year:1995 Production Capacity:: 120,000Ton/year(Hot coil) Production Capacity: 70,000ton/year(Cold coil) 1. HOT ROLLING MILL Make:Poscon(Korean) Year:1995 Main Motor: 2,400?(D.C 600?×4set) Line Speed: 150m/min Material width(W)3,100? Rolling pressure: Max. 1,200Ton Product weight: Max. 5Ton Product size: Max. 1,380?W×6~10T Production Capacity:: 120,000Ton/y Type: Two-High Reversing Mill Work Roll Ass'y ×3set Roll : 1,050×1,500? D.C Motor 600?×4set Speed: ...

Category: 107: sheet metal working
New in: used
Price: 2.000 €
Location: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Seller: Hagen Busch Maschinenhandel

Technical data: -Manufacturer: Binmak Type MR1050x75 -Country of origin: Turkey -BJ. approximately 2016 Work area approx. 1000x2mm -with foot pedal -Electric Weight approx. 300 kg -Roll diameter: 75 mm

Category: 107: sheet metal working
New in: used
Price: 1.600 €
Location: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Seller: Hagen Busch Maschinenhandel

Technical data: -Manufacturer: Binmak -Country of origin: Turkey -BJ. approximately 2014 Work range approx. 1000 x 0, 8 mm -with foot pedal -Electric Weight approx. 300 kg -Roll diameter: 56 mm

Category: 832: post press: folders
New in: 2000
Price: request quote
Location: Land-uk UK Oxford
Seller: I.E.S. (Scotland) Limited

Round pile feeder (RD66.1 Serial number 700581-281053), 1st unit TD66 1.4 - 4 x buckle plates, noise hoods, slit and score shaft (Serial number 700581-281053), 2nd unit TD66 1.4 – 4 x buckle plates, noise hoods, slit and perf shaft Serial number 700581-281053)VSF52 knife unit (Serial number 700243-280013), VSA presser/stacker 86.D MKE.D (Serial number 106836-262535)

Category: 832: post press: folders
New in: 2000
Price: request quote
Location: Land-nl NL 2105 Heemstede, Herenweg 29E
Seller: ITK Graphic Machinery

Folding machine (32 pages) Stahl Model TD78/442+K Year 2000 Working width 780 mm Feeder flat pile feeder + Tremat separation head Buckles 4+4+2 buckles + VFZ52 Mobile knife Delivery Lega 55 upright+pressing stacker Details First section 780 mm, second second 660 mm, third section 560 mm, knife section 520 mm Available direct

Category: 201: saws
New in: used
Price: request quote
Location: Land-de DE 32549 Bad Oeynhausen, Zur Bauernwiese 12
Seller: V. Grum-Schwensen GmbH

Machine is equipped with: 2 saw motors -adjustable from 45-90 °

Category: 104: grinding machines
New in: 1983
Price: request quote
Location: Land-de DE 04838 Eilenburg, Walther-Rathenau-Str. 24
Seller: ZOMA Maschinenhandel

Internal circular grinding machine with plan grinding equipment, second-hand internal and face grinding machine, used Type / type: SI 6/1 x 315 Manufacturer / make: WMW Year / year of make: 1983 schleifbarer the protection of workpiece diameter / grinding diameter: inner / internal 20... 400 mm; outside / external 500 mm maximum workpiece diameter workpiece protection /. maximum diameter of work piece: 500 mm Max grinding depth / maximum grinding length: 315 mm schleifbarer angle of cone / cone grinding: 60 ° Internal grinding motor power / power drive motor grinding of internal: 7,5 kW Internal grinding spindle speeds / rev's of internal grinding spindle: 2640... 16500 RPM  ...

Category: 109: other metal working machines
New in: 1966
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Machine for the production of longitudinal grooves at the edges -square or rectangular extended channels and -Number of roller shafts with folding rollers 15 PCs -Material thickness of 0,5-1,0 mm -Channel dimensions 80 x 80 mm -up to 100 x 100 mm -from the channel dimensions 100 x 100 mm -Continuous speed 15 m / min -Drive 380 V / 3 PS - e - foot switch -Space requirement approx. B 6400 x H T 1000 x 700 mm -Weight approx. 700 kg

Category: 201: saws
New in: used
Price: request quote
Location: Land-de DE 57080 Siegen, Schubertstr. 42
Seller: Ralph Rosenthal Maschinenlager

Elu double mitre saw glass Strip saw Klink-cutting saw

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-de DE 57080 Siegen, Schubertstr. 42
Seller: Ralph Rosenthal Maschinenlager

Saeed 3 rolls plate bending machine 2500 x 12mm Conical rolling possible 1 x top roll 220 mm + 1 x top roll 150 mm Lower roller diameter 180mm Maximum sheet thickness 12 mm Built CA. 1960

Category: 832: post press: folders
New in: 2004
Price: request quote
Location: Land-pl PL 30199 Krakow, Strugi 18
Seller: TOP GRAPHIC MACHINERY

Folding machine Heidelberg Stahlfolder PFH - 82 ref 2118EU Year - 2004 4 casets 2 knives Side pocket Pile feeder Delivery

Category: 1008: dumpers
New in: 2004
Price: 3.400 €
Location: Land-de DE 81677 München, Truderinger Str. 23
Seller: Schutt-KARL GmbH

PowerPac track dumpers 500 RC -B x L x H in cm dimensions: approx. 62 x 158 x 102 -Serial number: 04500176 -Year of construction: 2004 -Operating weight: 215 min Technical data â?¢ Honda engine GX 160 â?¢ Type: 1 cyl. / 4-stroke â?¢ Displacement: 160 cm³ â?¢ Power: kW 4.21 â?¢ Operating speed: 3600 RPM â?¢ Starting system: recoil starter â?¢ Air filter: dry cartridge â?¢ Fuel filters: Filter â?¢ Drive: gear units with circuit in an oil bath â?¢ Brake: Automatic safety brake â?¢ Steering: disconnection and steering brake â?¢ Net weight: 215  ...

Category: 104: grinding machines
New in: 2000
Price: request quote
Location: Land-it IT 25064 Gussago (BS), Via Mandolossa 142/D
Seller: Mimu Werkzeugmaschinen

TSCHUDIN TS 44 CNC cylindrical grinder CNC: Siemens 840D Centre height 100 mm Distance between centres 430 mm Max. grinding diameter 198 mm Workpiece weight on centres max. 150 kg Grinding wheel right and left hand Peripheral speed 35 m/s Hydraulic cross travel 340 mm Work piece spindle head: 1000 rpm rotatable +30/-45 ° taper in spindle: MT 5 Taper in tailstock: 3 MT Table speed: 8000 mm/min Grinding spindle motor 3.3 kW Total power required 12.5 kVA Machine's weight about 4400 kg this machine can be inspected under power in our warehouse Mimu Machine Tools (Gussago BS Italy)

Category: 105: saws
New in: 2014
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Used double mitre saw (from 2014) WEGOMA technical details Becttz98xu Double miter saw DS120B Working length 3350 mm Hydropneumatic saw feed Rotation 45 ° / 90 ° / 135 ° 4 cylinder, pneumatic 2 CARBIDE - tipped blades 420x30mm Digital display Incl. additional rest with role for DS120 Workpiece clamping from above, (designed voltage on the swing clamp - thus free access to the work table of the saw) Swinging, quickly replaceable printing plates can be used for different profile contours. Voltage incl. 1 PCs of straight plate - without supplements. Kit suction double mitre saw Extraction AS150 400V Professional LAU flan gene set consisting of 2 parts - 2 in 1 Edition record fo ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)