cosmetics used for sale

Container 1,100 liters made of V4A, used, temperature-controlled, insulated consists of material 1.4571(AISI316) V4A. The volume is approx. 1,100.00 litres. The diameter inside is 1,200 mm. Container 1,100 liters made of V4A, used, temperature-controlled, insulated was last used in the following area: Cosmetics. Currently, 1,100 liters of containers made of V4A, used, temperature-controlled, insulated still 2 pieces are available. Delivery can take place worldwide.

Stock # U825V Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to ...

Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) PRINTER: - Epson CW-C6000

1x Wolf vertical flow wrapping machines without scale (YOC, 2009), equipped with 2 formats (shoulder and tube) for film widths of 400mm and 275mm. Further equipment : a labeller (from MR Etikettentechnik) and Thermo Transfer Printer (from Valentin) belt drive with vacuum (vacuum pumps also included). with all associated manuals and operating instructions in good working condition. Siemens S7 controlled, plus spare parts. For further photos, videos, information or viewing appointments (machine still in daily use until January 2022), you are welcome to contact us by phone or in writing. Prior sale reserved. Keywords: Coffee, Production, Industry, Food, Pads, Nuts, Pet Food, Pasta, Instant, Granules, Wine Gum, Rice, Confectionery, Chocolate, Cheese, Bars, Pasta, Cereals, Cosmetics, Pharmaceuticals, Powder, Bulk Goods, General Cargo, Capsules, Tea, Drugstore search terms: coffee, p ...

It is an automatic hot air welding plastic pipe filling and sealing machine. (Metal tube option) The design principles, the materials used and the innovative concepts guarantee maximum productivity, ease of use and quality, making this machine the ideal solution for the pharmaceutical and cosmetics market. The group layout allows for easy adaptation to a wide variety of tube filling problems. Particular attention was paid to the quick changeover to different tube sizes and the consistency of the filling material. AREAS OF APPLICATION: Pharmaceuticals, chemicals, cosmetics, food, dietetics, medical devices, manufacturing. MAIN FEATURES: Easy-to-use tube filler with quick format changeover. Excellent access for cleaning and maintenance. Fast interchangeability of formats. . The machine is equipped with a pipe form with a diameter of 50 mm, other parts in tubular format are also ava ...

Jar cap inside lid feeder. This has been in use in the cosmetics industry. At the moment the lid size is 40 mm ( 5 mm )

Melting vessel with dosage. Manufacture: Kemwall Engineering ( UK ) Type: MV 4848 Year: 2001 Material: Stainless steel Melting chamber 20 liter Heat adjustable Weigher type dosage Weigher Sartorius 66813 This unit has been last used the cosmetics industry Available 2 pcs

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

Y.O.M.: 1980 No.: 10027 Usable volume: 150 l Pressure double jacket: +1 bar Vacuum pump Pressure gauge, temp gauge Scraper agitator, three-way valve 3 intake ducts Lid to be opened via lifting pull Dimensions LWH: 1700 x 1000 x 2100 mm Weight: approx. 500 kg Products: e.g. mayonnaise, sauces, ketchup, cosmetics, creams etc.

BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloid mill, disperser and mixer-scraper ideal for suspensions, emulsions and dispersions. Sectors: pharmaceutical, cosmetic, food or chemical industry. In stainless steel The PC incorporates: - Agitation, grinding and dispersion devices with independent actuation. - Colloid mill with real grinding action, thanks to the milling of its elements and the regulation of sepa ...

For the semi-automatic filling and dosing of Pasty products. Suitable for products such as E.g. oils, cosmetics etc. in cups, bottles, canisters, cans or similar containers. The container to be filled will be placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Vollpneumatische version without electronics. The fill pulse is triggered via a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing systems. Capacity: 600-1.800 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1 Volume ranges depending on the model type: Type: fill: D-P1-60 10 - 60 ml D P1-250 25-250 ml D-P1-500 100-500 ml D-P1-1000 100 - 1000 ml D-P1-2500 250 -  ...

Bottle filler for the semi-automatic filling for pasty products. Suitable for products such as e.g. yoghurt, oils, cosmetics etc. in cups, bottles, canisters, cans or similar containers. The to be filled container is placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Full pneumatical version without electronics. The filling pulse is triggered by a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing fullautomatically systems. Capacity: 600-1.200 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1

Mettler Viscometet complete case with all attachments. The Rheomat RM180: is a portable, easy to use viscometer, used primarily for quality control and product development. It can be used manually using simple push buttons on the keypad or using a personal computer and optional software. The Rheomat can use concentric cylinders, TV spindles and ISO 2555 measuring systems. It uses a rechargeable battery for portability or in the laboratory it has it’s own stand and power supply. The data is displayed on the Rheomats’ Liquid Crystal Display and can be downloaded to printer or personal computer. Displayed instruction is available in English, French, Spanish, German, Italian or Dutch. Typical applications for the Rheomat include cosmetics, food and coatings.

Vacuum processing plant Manufacturer: Fryma Type: Delmix MZM VK-7 Y.O.M.: 1994 Machine No.: M16397 Pressure inside: -1 bar Batch: 7 l for food, cosmetics, pharmaceuticals in sound condition Mobile Dimensions LWH: 900 x 800 x 1350 mm Weight: approx. 120 kg

The Brogli plant is designed to produce homogeneous products for the chemical, pharmaceutical, cosmetics or the food industry from powdered and liquid raw products using heat, pressure and mechanical stirring energy. Usable volume 200 litres. Plant incl. 3 feed tanks, vacuum pump, spare parts, etc.

Key data: 1000 , 158 , 40

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 40mm plasticising unit which gives a maximum shot weight of 158 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo  ...

Homogeneisive for renting Key figures: • Becomix RW60 CD + Feed container 50L • Working volume: 60L and 50L • Anchor agitator with scrapers and power breakers • Homogenizer with right/left barrel (homogenizing/pumping mode) • Circulation line • CIP • Lid hydraulically liftable • Fully automatic, control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics The machine is fully serviced and is available for rent. We take care of your project "Turn Key" incl. installation at your company as well as commissioning.

Specific Details Industry:pharmaceutical, cosmetics, nutraceutical, food, others Number of cartons:70 /min Length of carton (min):60 mm Length of carton (max):210 mm Width of the carton (min):20 mm Width of the carton (max):125 mm Height of the carton (min):15 mm Height of the carton (max):80 mm Motion:intermittent Leaflet device:Yes

Fully automatic high speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The high number of cycles with up to 75 cycles per minute is achieved, among others, by using a timing belt drive instead of a timing chain. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 75 cycles/minute (corresponds to: max. 150 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1 ...

The Glatt Multipan-Coater (GMPC) is designed specifically for research and development for coating tablets with aqueous or organic solvent solutions. As an option, it is also possible to coat cores with sugar syrup. For the pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing sectors. Once the system has been filled with tablets, heat is used in the application of aqueous coating solutions or dispersions. The tablets are then dried with treated air. Pan rotation enables a homogenous, coating layer by a permanent mixing movement of the product. The interchangeable Pan, respectively with a diameter of 440 mm and 750 mm. Each Pan has its own trolley on which it can be stored when not in use. For the purpose of inserting the pan into the coater, the trolley is equipped with a system of guide rails. Technical data: Length mm 2200 Width mm 1660 Heig ...

IMA CARTONING MACHINE, MODEL FLEXA CSD Year of construction: 2009 Flexa is a high performing, reliable, efficient and modular cartoner. It offers product handling combined with fast changeovers, ensured by advanced computer-controlled technology. Offers the best ergonomics for access, changeover, cleaning and trouble shooting. It can handle the cartoning of bottles (both plastic and glass), cosmetics, jars, inhalers, ampoules, vials and syringes etc. Equipped with GUK leaflet folder. TECHNICAL DATA: Net weight: approx. Kg 1580 Length: mm 3650 Width: mm 1750 Height: mm 2000 Frequency: 50 Hz Voltage: 400 volts Current: A 23 Pressure: bar 6 Production characteristics: Production speed: 140 cartons/min Carton width: 26-50 mm Carton height: 26-50 mm Carton length: 93-120 mm Compressed air consumption: 134 NI/min Installed power: 5 Kw The cartoning cycle is complet ...

Würschum semi-automatic 4-fold filling line Pneumatic filling machine with four filling stations For liquid and viscous products The filling machine has a pneumatic drive for the linear movement of the dosing piston in the stainless steel cylinder. Limit switches define very precisely the volume that the dosing piston sucks in. The dosing volume is set manually with a milliliter scale and a handwheel. This model requires only a compressed air connection, electricity is not required. The suction and dosing speed can be adjusted to the product viscosity by means of throttle valves. With an optional pneumatic manual screwdriver, the containers can be closed immediately after filling. The machine table can be rolled and can be moved to another room for cleaning after the end of production. Applications: Production and Laboratory Chemical industry Cosmetics i ...

M. No.: 12091 Equipment / Additional information: DESCRIPTION: The sealers Pactur thanks to their production concepts, can be easily transported. The electronical control grants good performances and user friendly functioning. Although they have a limited foot print, are equipped with a real shrink tunnel, which grants high packaging perfomances and excellent results. The machine has two conveyor belt movement cycles, choiceable from the control panel: forward-forward and forward-reverse. Forward-Forward, with product outflow from the side opposite the load, for greater productivity. Forward-Backward, with product return to the operator, for fragile products or logistical needs. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: Semi-automatic sealer with shrinking tunnel Pactur type Lady Pack 45/SL 2 includ ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 50 cycles/minute (corresponds to: max. 100 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1% | max. length of the tube: 200mm | tube diameter: 10-50mm (whereby one mould is required per tube diameter) | number of filling heads: 2 | storage hop ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1% | max. length of the tube: 200mm | tube diameter: 10-50mm (whereby one mould is required per tube diameter) | number of filling heads: 1 | storage hopper capacity: 40/50 L | product contact  ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. Fully automatic feeding, filling and sealing of the tubes. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Water cooling system, batch printer also included. PLC controlled with easy operation due touch screen. Optionally for surcharge: automatic tube outfeed device for convenient connection with other equipment such as cartoning machine. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | filling range: 10-250ml | accuracy: = +/-1% | tube dimensions: customized, whereby one mold is required per tube diameter | ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mil ...

Plate Filter JOLLY 20 For Juices, Wines, Beers and Oils - 2021 This plate filter was made by Italian MORI-TEM company in year 2021 and it has been only tested and thus in new like condition. Main structure is made of AISI 304 stainless steel, and the plates are made of food quality plastic material. It has been designed to clarify and sterilise red, white and sparkling wines, olive oil, vinegars, cosmetics, natural essences, herbalist products, sweet and dry liqueurs, etc. Equipment contains a food grade product circulation pump Technical characteristics Manufacturer: MORI-TEM S.r.l. Model: JOLLY 20 Manufacturing year: 2021 Capacity for oil: 100 litres/h Capacity for wine: 600 litres/h Number of plates: 21 Plate size: 20 x 20 cm Filtration area: 0.8 m2 Main dimensions: 72x43x55 cm (L x W x H) Machine weight: 36 kg Certification: CE

Fully automatic liquid filling machine with 8 filling heads for filling volumes of different alternative ranges: ONE of the following ranges can be choosen from: a.) 25-250, b.) 50-500 or c.) 100-1.000ml. Conveyor: adjustable speed control, MITSUBISHI touch screen, bottle mouth positioning system, filling heads moved down and up during filling process (foam products). - No-bottle-no-filling device, suitable for various liquids (cosmetics, perfumes, flower oil, liquor, etc.). Stable performance and accurat filling with cold and hot liquids. -Specifications: max. speed of the machine in neutral: 80 cycles/minute | stainless steel version | power supply: 220V | compressed air: 6bar: power consumption and consumption of compressed air depending on filling volume range - machines dimensions too. That machine/system is available in different versions for different packaging sizes and with diff ...

Vertical packaging machine specially designed for the cosmetics industry for the production of round bags and for 4-side sealed double chamber bags. The completely round side sealed bags are produced at 2 pieces per cycle. When changing the bag type, time is needed for changeover, which requires technical experience. A dosing pump for creams, fluids, etc., is included and is selected on the basis of customized product requirements, which results in the respective specifications. PLC LCD touch display from Siemens, automatic program-Set-Up, mark sensor, stainless steel (SS304) version including hot printer (production date, etc.). - Specifications: bag sizes: customized | film roll width: max. 320mm | suitable for composite and single-layer aluminium, PE, BOPP and PP films, paper | max. speed of the machine in neutral: 40 cycles/minute (corresponds to 80 round bags or 40 double chamber ba ...

FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine was built by the Chinese brand FOSHAN OCPACK PACKAGING MACHINERY CO.,LTD. in 2021. Reliable and easy to operate machine, performs the process of automatic packaging of a wide range of products i.e. food, medicines and cosmetics into cardboard boxes with maximum dimensions of 130x80x210 mm. The items are transported by conveyor belt to a designated area, where they are stacked and pushed inside the box. A microcomputer together with a photocell controls and ensures that the packing process is performed accurately. The automatic carton box packaging machine is equipped with an OMRON HMI panel and an emergency stop button. The total weight of the machine is approx. 1300 kg. Technical specifications of the FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine - HMI panel: OMRON - maximum box dimensions (L x W x H): 1 ...

Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...

Compact packaging machine from a renowned manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with settings for welding time, cooling time, shrink temperature and shrink time. -Perforation possible via three adjustable needle rings. - Maximum package size approximately: length 460 x width 320 x height 200 mm. -Maximum film roll approximately: length 400 mm / diameter 250 mm. -Equipped with a holding magnet. -Working height approx. 900 mm. -Roller holder movable. -Adjustable product slot. -The machine can be moved and locked with castors. -Can also be used as a tabletop unit, as the top part is removable. -230 V / 50 Hz. -Documentation consisting of operating instructions, circuit diagram and spare parts list ...

Packaging machine from a reputable manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with adjustment options for welding time, shrink time and shrink temperature. - Maximum package size approximately: length 700 x width 600 x height 250 mm. -Perforation possible via two adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roller holder movable. -Adjustable product slot. -Machine can be moved with castors. The machine can be demonstrated under electricity.

Pester PEWO-Pack 450 SN, overhauled in 2013 For tightening banding single and collective containers with PE film in the pharmaceutical, cosmetics and food industry The technically high-quality standard equipment includes: - Control panel with touch panel, Temperature monitoring, general fault indication - Product protection through safety monitoring by means of Sensors in the closing area - Foil monitoring, - Machine can be moved, i.e. it has swivel and fixed castors for internal transport, in the resting position, the stability is ensured by height-adjustable feet - Two-hand release for manual operation -Documentation Specifications - - Working dimensions (max. mm): - Rack length 300, - Rack width 540, - Slide-in height 250, - Seal width 450, - Output: 24 cycles/min. - Hardware and software PLC Mitsubishi / remote maintenance possi ...

Pneumatic Filling Machine with Filling Elbow Function The machines work according to the piston principle: suck in - eject. One or two dosing pistons are driven by means of a pneumatic cylinder.  The desired filling quantity is set via a handwheel on a scale on the machine. ■ Pneumatic volumetric piston dosers ■ Filling capacity 300-800 pieces/h ■ Dosing accuracy +-0.5% ■ Ready to use, easy to use ■ Easy to clean ■ Filling range 2-500ml / interchangeable cylinder ■ Self-priming ■ Easily transportable for different locations Applications:  Production and Laboratory Chemical Industry - Cosmetics Industry Food & Pharmaceutical Industry Paints and coatings industry Type: H 80-P-MV Filling range 8 - 80 ml  Bottling: 300 - 800 h More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Packaging machine from a reputable manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with adjustment options for welding time, shrink time and shrink temperature. - Maximum package size approximately: length 800 x width 600 x height 300 mm. -Perforation possible via several adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roller holder movable. -Adjustable product slot. -Machine with castors movable and lockable. -400 V / 50 Hz. The machine can be demonstrated under electricity.

Pneumatic Filling Machine with Filling Elbow Function The machines work according to the piston principle: suck in - eject. One or two dosing pistons are driven by means of a pneumatic cylinder.  The desired filling quantity is set via a handwheel on a scale on the machine. ■ Pneumatic volumetric piston dosers ■ Filling capacity 300-800 pieces/h ■ Dosing accuracy +-0.5% ■ Ready to use, easy to use ■ Easy to clean ■ Filling range 20 - 110 ml / interchangeable cylinder ■ Self-priming ■ Easily transportable for different locations Applications:  Production and Laboratory Chemical Industry - Cosmetics Industry Food & Pharmaceutical Industry Paints and coatings industry Type: H 200-P Filling range 20 - 110 ml  Bottling: 300 - 800 h More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Professional packaging machine from a renowned European manufacturer, which is equipped with many options and adjustment options. Suitable, for example, for packaging foodstuffs (baked goods, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. Functions: -Automatic mode / manual operation selectable. The packaging process can be started via several options. Manual via hand button or alternatively foot switch. Automatically by time input of intervals in which the shrink hood automatically lowers. -Automatic product ejection through the outfeed conveyor. -Automatic rewinding of residual foil possible. Settings: CPSW0U08R -Only "welding" or alternatively "welding and subsequent shrinking". -Welding time adjustable. -Shrink temperature adjustable. -Shrinkage time adjustable. -Holding time adjustabl ...

Manufacturer : Lewa Model: ecodos 750 P1 Year : 1998 Type : low pressure diaphragm metering / dosing pump   Max capacity : 750 L / H Operating pressure : 5 bars Min / max stroke : 10/0 mm Speed : 113 rpm   Application: sanitary/hygienic for the pharmaceutical, chemical, cosmetics and food industries. Classification: Atex (EEx) Variable speed drive Special acid coating: Stainless steel / PVC-H

Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulu ...

Used vacuum homogenising mixer type HYJRZ-50. Technical data: - Machine made of stainless steel, - Tank capacity: 65 L, - Working volume: 50 L (minimum 30 L), - Mixer: 1.5 kW 60 rpm, with inverter for speed control, - Homogeniser: constant speed 2.2 kW 2900 rpm, with inverter to regulate speed. - Power supply: 3 phases 380v/50hz, - Vacuum pump helps to pressurise the tank, - Lower 2 electric heaters are made of high quality stainless steel, tap water valve for heating the jacket, temperature control on the control panel, - Maximum heating temperature by water heating 100 °C , - Maximum heating temperature by oil heating 150 °C, - Minimum heating temperature is room temperature; - Heating power 6kw, - Cooling method: by cold water or chilled water through the central jacket. - The temperature sensor for temperature measurement is located in the control box. - Wei ...

Mettler Viscometer complete case with all attachments. The Rheomat RM180: is a portable, easy to use viscometer, used primarily for quality control and product development. It can be used manually using simple push buttons on the keypad or using a personal computer and optional software. The Rheomat can use concentric cylinders, TV spindles and ISO 2555 measuring systems. It uses a rechargeable battery for portability or in the laboratory it has it’s own stand and power supply. The data is displayed on the Rheomats’ Liquid Crystal Display and can be downloaded to printer or personal computer. Displayed instruction is available in English, French, Spanish, German, Italian or Dutch. Typical applications for the Rheomat include cosmetics, food and coatings.

Used Automatic Filling Monoblock with Labeller 2022 The Sraml filling monoblock is a fully automatic machine that incorporates a rinser filler and steam capper tribloc making it a highly efficient and effective solution for bottling This monoblock can fill up to 3000 bottles per hour thanks to its 12 gravity filling valves and single capping head Moreover the monoblock comes with a cap elevator and a HEPA filter for a laminar flow system This filter ensures that the bottles remain clean and hygienic during the filling process making it suitable for the food and beverage industry The Sraml monoblock is capable of accommodating sizes of 250ml 750ml and 1L making it a versatile machine for various bottling needs The Etipack labelling machine is another fully automated solution that offers front back closing seal and around labels With a speed of 20 meters per minute this machine can handle  ...

Used Sipa Rotary Blow Molding Machine 2008 A Comprehensive Overview Are you in the market for a reliable blow molding machine Look no further than the used Sipa Rotary Blow Molding Machine 2008 In this article we will delve into the details of this machine exploring its features specifications and benefits Whether you are a seasoned professional or just starting in the industry this article will provide you with valuable insights into the Sipa SFR8 Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1 Introduction Blow molding machines play a crucial role in the production of various plastic containers The Sipa Rotary Blow Molding Machine 2008 also known as the SFR8 is a popular ...

Used Shrink Wrapper SMI LSK 30P year 2004 Welcome to the world of high quality packaging solutions with the SMI Shrinkwrapper LSK 30P from the year 2004 This advanced packaging marvel proudly presented by the renowned brand SMI is your gateway to efficient and impeccable packaging Key Features Designed to meet your packaging needs with precision the SMI LSK 30P boasts an impressive array of features Model and Performance This shrinkwrapper is the LSK 30P model offering a remarkable maximum speed of 30 packages per minute ppm Its consistent and reliable performance ensures your production line runs smoothly Container Compatibility Perfect for 750 ml packages the machine accommodates PET materials ensuring both durability and visual appeal It supports a maximum container height of 350 mm allowing you to package various products effortlessly Package Type The machine excels in using a film l ...

The biconical type mixer makes a homogeneous mixture of solids. The mixing process is a common operation in manufacturing for the health, food, chemical, cosmetics, detergents, fertilizers and plastics industries. Some examples are pharmaceutical granules, flour semolina, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations for making dehydrated creams and soups, foliar waxes, granulated detergents, soap flakes, artificial fertilizers, powdered plastics or shredded, plastic pellets and fiberglass, etc. The Bicono mixer for solids has a rotating biconic drum that rotates at low speed, making the product slide smoothly along its smooth interior walls, making the product unforced. Characteristics: Repetitive, reproducible and scalable mixes. Low maintenance mixer. Extreme ease of cleaning. Total emptying of  ...