cosmetic used for sale

Stock# UG6357 Used line for production compacted cosmetic powders by Co.Pack (IT). Line is working on pans with diameter 58.5 mm - output up to 1500 pcs/hour, and pans with diameter 36.5 mm - output up to 3200 pcs/hour. Line consist of: - automatic, vibrating feeder of pans. - pressing machine Co.Pack , Rotopack 100 PS/4 - automatic powder feeder, hydraulic press and automatic discharge. - station for cleaning bottoms and edges of pans - packaging station - where pans are packed into plastic trays. Line is new 2013.

Cosmetic powder press Frequency: 50 Hz Manufacturing date: 2005

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Container 1,100 liters made of V4A, used, temperature-controlled, insulated consists of material 1.4571(AISI316) V4A. The volume is approx. 1,100.00 litres. The diameter inside is 1,200 mm. Container 1,100 liters made of V4A, used, temperature-controlled, insulated was last used in the following area: Cosmetics. Currently, 1,100 liters of containers made of V4A, used, temperature-controlled, insulated still 2 pieces are available. Delivery can take place worldwide.

Stock # U825V Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to ...

Tube Diameter (Min): 25 mm // Tube Diameter (Max): 50 mm

Tube Diameter (Min): 16 mm // Tube Diameter (Max): 50 mm

Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) PRINTER: - Epson CW-C6000

Operating temperature: 90 °C Material: stainless steel 316 L, mirror-polished (easy to clean) Operating pressure: 5 bar Code. No. 27512 12 Ser. No. 92013791A The filter is designed for the otimal filteration of solutions in pharmaceutical, biological, cosmetic, bioprocess, food and brewing industries. The samples of application: biopharmaceutical blood products atibiotics cough syrup intravenous solutions bioprocess solutions cosmetic, food and brewing products spiritus water food and beverages: water, wine and beer pharmaceutical : API water biotechnology: cell crop, plasma fractions, chemical solutions

BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloid mill, disperser and mixer-scraper ideal for suspensions, emulsions and dispersions. Sectors: pharmaceutical, cosmetic, food or chemical industry. In stainless steel The PC incorporates: - Agitation, grinding and dispersion devices with independent actuation. - Colloid mill with real grinding action, thanks to the milling of its elements and the regulation of sepa ...

General SKU251U351 LocationBarneveld MakeBlackmer TypeGPI C18 I CV Mach.No.566084 Pressure Working pressure1.5 Bar Main Features MaterialStainless steel Volume18000 Ltr. Motor5.5 KW Specified Features - Eccentric Screw Pump MaterialStainless steel 1.4571 (316Ti) Eccentric Screw Pumps Pumpcheck Number of pumps:1 Capacity± 18 m³/h With motor5,5 kW, 1450 rpm, (Ex) Information Year of construction2005 Mounted on framecheck Total height1 m CEcheck Floorspace1,7x0,5 m Weight350 kg ATEX compatiblecheck Extra SpecificationsSuitable for most sanitary applications, including food and beverage, pharmaceutical, and cosmetic processes, particularly those that require consistent non-pulsing flow and gentle fluid handling (low shear rate), such as:- In the food industry: flavor, sauce, chocolate, glucose.- In the beverage industry: yeast, concentrate, glucose, fruit juice, ...

Line for labeling cylindrical packaging for cosmetic and food products. Package types: bottles, sliders, cans, tins, cylindrical containers, cosmetic bottles, cups and other cylindrical packages Date printing: yes, inkjet printing Label bonding accuracy: +/- 1 mm Label height: 20-170 mm Label length: 20-350 mm Package diameter: 10 - 110 mm Performance: 20-30 labels/min Drive: pneumatic + electric Compressed air: 5-8 bar Machine dimensions: 2100 x 900 x 1550 mm Connection: 230 V, 50/60 Hz Power consumption: 1200 W Weight: 150 kg

Cat.-Nr. 11-3330 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1 sterilizable, vacuum proof Process Vessel, mobile for production from dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke GmbH, Germany Model: DB 170 FW Machine. No.: 2226 Content: 187 liter Material: Stainless steel V4A / 4571 polished Product area: pressure resistant up to 3 bar double jacket: 35,5 liter, pressure resistant up to 2 bar Tempering system: double jacket for heating and cooling working temperature: up to 133 C Dimension: 0,9 x 0,9 x 1,2 m Weight: 230 kg Technical condition: used, excellent, like new operating condition

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Model CAR-T5 is a reliable, totally mechanical cartoning machine for different types of products and very versatile. The robust construction of the whole system allows the production with almost all types of cardboard. The machine comes with the automatic bottle feeding system. The size change is simple and fast, adjustable with the handle and easy to maintain. The cartoning machine is built with state-of-the-art technology and is very robust. The application area of the cartoning machine is almost unlimited. This model is used worldwide in the pharmaceutical, cosmetic, chemical and food sectors. Technical data: Production: 120 cartons/min handling: intermitent carton measurements (A x B x H): Min. 20 x 16 (12) x 60 mm max. 95 (105) x 70 (80) x 200 (205) mm Electrical consumption: 4 kW Power: 9.5 kVA Compressed air: 9.5 m³/h 6 bar.

GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Picker SureView M2 with: Tube M-147 0.1/0.3 Bucky 18x24 and 24x30 Without radiation protection wall complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into ...

The Frymix machine is suitable for powdered and liquid raw product using heat, pressure and mechanical stirring energy to produce homogeneous products for the chemical, pharmaceutical, cosmetic or food industry. Machine comes in explosion proof version, elect. panel, weighing cells etc. Usable volume: 400 liter, volume tot.: 630 liter, min. volume: 60 liter. Attention: it needs a ceiling height of at least. 4.40 m!

Carestream Direktview CR 950 with: 2x Control panel 25 cassettes: 18x24-8 pcs. 24x30-5 pcs. 35x43-12 pcs. complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before plac ...

The Fryma machine is suitable for powdered and liquid raw product using heat, pressure and mechanical stirring energy to produce homogeneous products for the chemical, pharmaceutical, cosmetic or food industry. The homogenizer is composed of heating and cooling with steam, water or thermal oil incl. stirrer. Filling volume: max. 400 liters, min. 105 liters.

Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...

- 1 x Onyx type 6252 inserting machine Sn. 35226-2 - 1 x main product shuttle feeder typ 289.0400 (signature feeder) - 1 x opening station - 3 x insert feeders - 1 x 'special product' feeder (eg. pen, CD, cosmetic samples etc inserts) - 1 x Safir typ 6270 filmwrapping machine (individual wrapper) Sn. 35226-1 - conveyors

Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...

The Brogli machine is suitable for powdered and liquid raw product using heat, pressure and mechanical stirring energy to produce homogeneous products for the chemical, pharmaceutical, cosmetic or food industry. Usable volume: 300 liter, volume tot.: 369 liter, min. volume: 100 liter.

Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is  ...

Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...

AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...

Automatic, Continuous motion Horizontal Cartoner Marchesini MA 150 Continous motion horizontal cartoner, entirely made with balcony construction, designed around three basic concepts: versatility, ergonomics and maximum efficiency in a small footprint. Because of its characteristics it is the ideal solution for packaging cosmetic and pharmaceutical products. The Model MA150, working with intermittent motion, is indicated for some product types. Main features: Balcony construction, as per GMP norms All feeding groups are located in ergonomic position, in order to make the loading easy for the operator All main drive mechanism are in oil bath, thus reducing maintenance and noise level Easy and fast changeover, entirely made from operator side Touch Screen control panel, for operator interface and machine management Self diagnosis and help functions Possibility to install an au ...

OEC Medical System Compact 7600 with: Tube Nagel & Goller EP-F-190 0.6/1.5 Image amplifier 23 cm LIH (Last Image Hold) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...

Vessel for Melting Manufacturer BINDER 1000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available (from 2008)!

1 cool- and heatable, sterilizable, vacuum-resistant stainless steel process tank for the production of dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke, GmbH Type: DB 170. FW Machine. No.: 2226 Content: 187 litres Material: stainless steel V4A / 1.4571 Product-contacted parts polished Product room: pressure-resistant to 3 bar Double jacket for heating and cooling Double jacket: 35.5 litres, pressure-resistant to 2 bar Operating temperature: up to 133 C Ventilation and vent valve Rise tube Pointer thermometer from 0 - 160 C Pressure gauge Safety valve Filling opening NW 60 Bottom seat valve NW 20 Agitator flange available Operating instructions + list of spare parts, etc. Dimensions: approx. 0.8 x 1.4 m Weight: approx. 200 kg Technical condition: used, excellent as good as new operating condition

Vessel for Melting Manufacturer BINDER 2000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. TÜV-certificate available (from 2008)!

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

Vessel for Melting Manufacturer BINDER 1.000 Litres for Cosmetic and Food Stuff used – in very good condition no. 174/91, max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available!

Vessel for Melting Manufacturer BINDER 1.000 Litres for Cosmetic and Food Stuff used – in very good condition no. 175/91, max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available!

Pharmaceutical, cosmetic, food and chemical stirrers / blenders Tripod agitator: VISCO JET® VJ200 - as good as new, unused because not ATEX The pilot plant agitator for research and production Can be used up to a container height of 500 mm, max. container diameter of 400 mm Manual lifting height adjustment, infinitely lockable, operation via touchscreen Safety switch for container clamping, emergency STOP switch. Including 5 different VISCO JET® agitators for low-, medium- and high-viscosity media Original price as offered (stainless steel roller table, touch screen, shafts and stirrers) was EUR 23.000,- net

Reference ID: PP-35237 Category Folder Gluer Manufacturer Bobst Model E-Fold-1100 Elite Year Built 2021 Condition Very Good Location Europe Availability December 2023 Machine Description Crash-lock bottom boxes Straight-Line boxes 4/6 corner boxes Card board:200-800 g/m² Corrugated board:N/E/F Flute Belt Speed:320 m/min (420 m/min as optional) Jogging Speed: 20 m/min Strong and steady construction to improve running conditions; Modular design for easy adaptation to accommodate various boxes from food, pharma to cosmetic, electronics and so on; New HMI with icon design for easy communication ; Wired for connection with other equipment including smart logistic, electronic gluing, inspection system and so on; Equipped with high speed electronic counting device for accurate box count; Special B-Type lower glue pot for easy maintenance and glue wheel exchange; Smart ...

Unipac Silver 80 automatic plastic tube filling machine. The machine is well suited for packaging pharmaceutical, chemical, cosmetic, food, etc. products. Manufacturer: Unipac srl Italy Type: Silver 80 Year of production: 1988 Automatic cassette-type feeder for tubes Material: Stainless steel Funnel with stirrer Tube sealing (hot jaw) Various exchange format sizes Electricity: 380 years, 50 Hz Weather: 6 bar The machine is in good working order

This unit is a filling and closing machine for metallic, aluminium tubes. The construction principles, materials used and innovative concepts guarantee maximum productivity, user friendliness and quality, making this machine an ideal solution for the pharmaceutical and the cosmetic market. Special consideration was given to a rapid change over to different tube sizes and consistency of filling product. The in-built flexibility makes it the ideal machine for use in research and development. Easy to use machine with excellent access for cleaning and maintenance. Technical data: Length mm 1825 Width mm 1115 Height mm 2150 Net weight Kg 2200 Production characteristics: Tube diam. min-max 10-52 mm Tube length min-max 52-250 mm Dosage min-max 2,5-500 ml Production capacity 40-120 tubes/min Automatic tube filling machine equipped with heated funnel, agitated hopper and 14 ...

EKATO UNIMIX LM 4,5 laboratory vacuum and homogenizing mixer for the manufacture of cosmetic and pharmaceutical products such as emulsions, suspensions, creams, lotions and pastes, capacity from 1,0 to 4,0 litre, anchor stirrer with side and bottom scrapers (50-210 RPM), homogenizer/dissolver (8000-24000 RPM), jacketed for heating/cooling, usable for vacuum, maximum internal working pressure -1/+2 bar, maximum working pressure jacket 6 bar, maximum internal temperature 133 ºC, maximum temperature jacket 150 ºC, lid-lifting device, temperature control system, electrics 220V; 50/60 Hz, maximum power 3 kW.

Filling- and crimping machine under vacuum for cream flacons or other cosmetic packaging. Working with airless guarantee that no air is trapped with the product during packaging. Machine is fittet with mobile vacuum unit, vacuum pump, various format parts, spare parts etc. Max. output: 2000 units/h.

Hongming HM-600E + PK850 Automatic Case Making machine for Book Cover or rigid box The automatic case maker is made up of two models: the HM-600E and the HM-PK850. When these two machines are used together, they form an automatic case making line. 1-Hongming HM 600E Book cover + box glueing and positioning machine Age: 2021 The Automatic Rigid Apparel Box gluing and positioning Machine is an automatic multifunctional equipment for high precision positioning of hard cover and premium rigid boxes. It is suitable for mass production of a variety of rigid boxes such as jewelry boxes, mobile phone boxes, gift boxes, cosmetic boxes, watch boxes, chocolate boxes and some special rigid boxes, etc. Features: 1. Suit to all kinds of rigid box for positioning 2. Suit to all kinds of hard cover for positioning 3. Computer control for all parameter setting 4. Auto error stop and displ ...

World’s most flexible stretch blow molding machines Model: FlexBlow 2 Cavities: 2 / 1 Maximum bottle neck diameter: 120 mm Maximum volume: 6 L / 1.6 gal Maximum output speed: 3000 BPH The widest neck and size range capability allows production of cosmetic containers, hot-fill, jars, and large containers. All on one stretch blow molding machine and at record complete mold and neck changeover times. For more info visit our website: flexblow ,com Keywords: stretch blow molding machine, stretch blow molding, pet stretch blow moulding machine, stretch blow, pet bottle stretch blow molding machine, reheat stretch blow molding, reheat stretch blow molding machine, 2 Stage Blow Molding Machine, pet stretch blow molding machine, reheat blow molding, stretch blow moulding machine, pet stretch blowing machine, pet stretch blow moulding, ,reheat blow molding machine, Two-Stage  ...

World’s most flexible stretch blow molding machines Model: FlexBlow 4 Cavities: 4 / 2 Maximum bottle neck diameter: 55 mm Maximum volume: 6 L / 1.6 gal Maximum output speed: 6400 BPH The widest neck and size range capability allows production of cosmetic containers, hot-fill, jars, and large containers. All on one stretch blow molding machine and at record complete mold and neck changeover times. For more info visit our website: flexblow.com Keywords: stretch blow molding machine, stretch blow molding, pet stretch blow moulding machine, stretch blow, pet bottle stretch blow molding machine, reheat stretch blow molding, reheat stretch blow molding machine, 2 Stage Blow Molding Machine, pet stretch blow molding machine, reheat blow molding, stretch blow moulding machine, pet stretch blowing machine, pet stretch blow moulding, ,reheat blow molding machine, Two-Stage Bl ...

World’s most flexible stretch blow molding machines Model: FlexBlow 2 Cavities: 16 Maximum bottle neck diameter: 43 mm Maximum volume: 2 L / 70 oz Maximum output speed: 26000 BPH The widest neck and size range capability allows production of cosmetic containers, hot-fill, jars, and large containers. All on one stretch blow molding machine and at record complete mold and neck changeover times. Gtwndh3he For more info visit our website: flexblow.com Keywords: stretch blow molding machine, stretch blow molding, pet stretch blow moulding machine, stretch blow, pet bottle stretch blow molding machine, reheat stretch blow molding, reheat stretch blow molding machine, 2 Stage Blow Molding Machine, pet stretch blow molding machine, reheat blow molding, stretch blow moulding machine, pet stretch blowing machine, pet stretch blow moulding, ,reheat blow molding machine, Two-S ...

Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the au ...