corrugated used for sale

Automatic sheet to sheet Laminator DGM ETH1650  Manufacturer : DGM  Year of Installation : 2014  Year of Manufacturing : 2014  Format : 1650x1450  Description :  High Speed Automatic Sheet to Sheet Carton Laminating Machine  - Maximum paper size : 1650 x 1450 mm  - Minimum paper size : 380 x 380 mm  - Top Sheet : 180-350 gm/m2  - Corrugated Board: E,F,B,C,A & up to 5 layers  - Carton Board: min 250 gm/m2  - Speed : 5000 s/h  - Line speed: 130m/min  - Dimensions: 14.5 x 2.6 x 2.7 m  - Weight: 8.5 ton  - Power Consumption: 15.7 kW

Fully automatic erector for corrugated cardboard folding boxes Direction of travel from right to left Carton format range widt 160 - 460 mm, height 160-610 mm, length 210/300 - 510/600 mm Output max. 15 cartons/min, depending on the format Bottom sealing machine GT-B150-H20 for gluing with self-adhesive tape Manual format adjustment Drive 400V/50Hz

Qty. 1 Second-hand carton forming machine Mfc.: STORK Bepak B.V. Type: S.A.-25 – 0.25, 0.5, 07 L Built: 1998 Possibility to form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to C, a hot melt adhesive applicator (Nordson USA) (granules or flakes) applies heated hot melt adhesive under high pressure in the form of strips to the vertical folds of the bottom of the carton. Capacity: 25 cartons/min Installed power: 8 kW Technical assessment: complete device, technically efficient. Price: EUR 49,500.00 As is where is!

- Paper from 80 g/m2, cardboard up to 2000 g/m2, - Corrugated board E, B flute, up to 4 mm thickness - Sheet format max. 740×1050 mm - Sheet format min. 350 x 400 mm - Punching pressure: 260 t / 2.6 MN - Output max. 9000 sheets/hour - Touch screen panel - Punching, creasing, perforating, embossing, stripping - Totalizer: 12,3 mio.

Hot Foil Stamping Machine Carton board min: 80 gr Carton board max: 800 gr Corrugated board max: 2 mm Sheet size min: 29,5x35 cm Sheet size max: 78x108 cm Speed max: 4000 s/h Stamping speed max: 4000 s/h Stamping & embossing size max: 78x108 (Longitudinal) Stamping & embossing size max. 78x108 (Transversal) Die cutting size max: 78x108 Temperature max 180 ºC Foll length: 1000 meter Longitudinal: Web width advance shafts: 72 cm Transverse: Web width advance shafts 102 cm Max. pile height (feeder unit): 120 cm Max. pile height (delivery unit): 120 cm It is in very good condition Available immediately

DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°

Benhil universal semi-automatic cartoner Multipak 8501 In great condition Productivity pack / min (boxes) - 90 (1.7) Packing size, mm - 75 × 50 × 28 Build packages × rows × layers - 3 × 6 × 3 Filling principle - side loading P max, kW - 1 Voltage, V - 380 Siemens Simatic S7-300 controller Reconfiguration for a pack of 220 grams is possible The packaging machine is used to pack rectangular, square and cylindrical bags, as well as rectangular and round cups. Packages or cups fed along the conveyor are formed into a block that has the following parameters: • Rows × number of packages in a row × layers • Width × length × height The type of layout can differ significantly within the limits of the minimum and maximum dimensions of the block, while the possible number of words is from 1 to 10. Box material For folding boxes - corrugated ca ...

Stock 14R5-P / 1250 P - laminating machine year 2004 max. size 1,250 x 1,640 mm min. size 500 x 500 mm Paper 100-400 GM2 Solid Board max. 350 g corrugated board max. 7 mm in production good condition

Used TecnoBox carton machine model TX-1. New 2009. Tecnobox machines offer solutions for assembling and gluing corrugated cardboard boxes, handling most formats available on the market (including P84, Column, Plaform, C1). The TX series, thanks to its design and composition, is undoubtedly one of the strongest and most robust machines on the market. With no major maintenance work required thanks to standardised and wear-resistant components, specially positioned for easy access, it is possible to replace them even without much mechanical knowledge. All these components are ISO-certified and can be easily found in the widest variety of parts shops. Designed to meet the requirements of mobility, thanks to its robustness and transport attachment elements, it makes installing the machine at a specific location simple and easy.

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Carton Packing Machine Manufacturer: EMSIZE / Packsize Model No.: EM4-25 Continuous Corrugated Cardboard Year of construction: 2002 Condition: Ready to use (used) Location: Porta Westfalica Carton machine type EMSIZE / Packsize for processing continuous cardboard from the stack Machine Description: The machine listed here belongs to the series of static machines, i.e. the operations transverse to the machine are carried out on the upright carton. The machine is designed for high productivity. The maximum working width of the cardboard box is 2,400 mm. All settings of the tools are carried out automatically. Retail price: € 9.500,--

Smoking trolley with corrugated profile, only for skewers (1000'er) with smoke skewer Star profile (20pcs.) Stainless steel W.-No. 1.4301 Dimensions: 1021 x 985 x 1970 mm 6 floors, floor spacing: 270 mm H-shape, crossbar height: 390 mm Load capacity approx. 500 kg Condition: Used, but in very neat condition and ready for immediate use. Availability: On request

Fasson gluer type SFAM 716 with display mounting station Suitable for full, façade, edge or strip gluing. A high gluing and repetition accuracy of the gluing is guaranteed. Suitable for different substrates - such as open formats, die-cut blanks, etc. made of corrugated and solid cardboard, rigid foam boards, etc. • Sheet system by means of drive chains, also for complicated cuts • High register accuracy • Working width: 2,050mm • Output: 1-lane approx. 4-20 cuts/min; 2-lane approx. 8-40 cuts/min • Cutting thickness: approx. 0.5 to 20mm • Sheet control • Easy adjustment and correction of the register via the display, even during production Consists of: Fasson—Banding machine type SFAM 716 Display Workbelt Type 5A/1650 PRESS BELT Type 5/1650_D.4 Assembly station

- Paper from 80 g/m2, cardboard up to 1.400 g/m2 - Corrugated board up to 4 mm thickness - Sheet format max. 750×1050 mm - Sheet format min. 350 x 400 mm - Punching pressure:300 t / 3.0 MN - Output max. 7.500 sheets/hour - Touch screen panel - Punching, creasing, perforating, embossing

Used carton machine by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type S.A.-25. New 1998. Can form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to section C, an applicator (from Nordson USA) of hotmelt glue (granules or flakes) applies heated hotmelt glue under high pressure in strip form to the vertical dan tabs of the carton. Capacity: 25 cartons/min. Installed power: 8 kW.

Used Automatic Wrap Around Packer Vanta 2100 bph Introductionof the Wrap Around Packer Vanta Initially the used Vanta 2100 bph automatic wrap around packer marks a significant innovation in the bottling sector Specifically designed to accommodate various container types like cans glass bottles and PET bottles this machine exemplifies efficiency and precision in packaging Product Types and Scope of Application Notably versatile the Vanta 2100 bph adeptly adapts to different product sizes and types It can manage cans glass and PET bottles with diameters ranging from 50 to 110mm and heights from 70 to 370mm Moreover its capacity extends to the packaging size crosswise to the conveyor direction from 140 to 450mm and forward from 200 to 450mm Additionally the range for corrugated board sizes is expansive horizontally to the conveying direction from 210 to 1500mm and frontally from 280 to 700m ...

Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110 Year 2009 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hour Top Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Registration Accuracy Up to 0,2mm (0,008”) Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size  (widthxlength) 2050mm x 460mm - weight 2800kgs Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines ...

MS UBS-6-90 circular sawmill - German production - high efficiency - DTR - year of production 2007 - possibility of installing 6 shields - daily capacity up to 200 m3 max. log diameter 390 mm cutting width from 80 to 250 mm width of the additional board from 18 to 80 mm disc diameter 1000 mm electric disc spacing engine power 2 x 90 kW feed speed continuously adjustable 5-30 m / min 4 kW feed motor power length of the feeding table 8000 mm feed table with chain turners dimensions of the cross feeding table 4500 x 7000 mm length of the receiving table 5600 mm dimensions of the corrugated receiving table 4000 x 4000 mm reception of sawdust with vibrorine two lasers total length 18.5 m weight of the sawmill 9.8 tons

BOBST SP 103 – E Type: AUTOPLATINE SP 103-E Year: 1995 Sheet size max: 1030 x 720 mm Sheet size min: 400 x 350 mm Max. Punching with gripper edge drop 1030 x 705 mm Max. Cutting without gripper edge drop 1030 x 720 mm Coinage 1030 x 690 mm Gripper edge 9 – 17 mm Platen pressure max 2,5 (250) MN(t) Production speed 8000 B/Std. Min. Paper 80 – 90 g/m2 Max. Carton 2000 g/m2 Corrugated E B - max 4 mm The machine is in very good working condition / Like new Push lay opposite operator side Pull lay operator side Centerline

Series No: 96225/64, Straight Line, Crash Lock, 4 Gluing Points, Width unfold: Max: 880, Min: 45, Width fold: Max: 425, Min: 18, Lenght Unfold: Max: 900, Min: 60, Capacity: 0-300 m/min, Material: Corrugated Cardboard with Waves E and B, Cardboard, With Bobst Polyfoder, M-No. 390101, AGE: 1972, Standard Accessories

Lamina crash-lock gluer year: 2008 Technical Specification: max. thickness: 4mm for crash lock boxes 6mm for standard boxes Min. thickness: 1mm corrugated flute type: E, B, C For more technical data, please don't hesitate to contact us.

- Folding and gluing machine - Supply voltage(V): 400 - Auxiliary voltage (Vdc): 24 - Frequency (Hz): 50 - Power (kW): 3 - Power of gluing system (kW): 5,8 - Machine length (mm): 6175 - Machine width (mm): 1576 - Machine height (mm): 1580 - Minimum die cut format (mm): 120x120 - Maximum die cut format (mm): 720x1020 - Full automatic continuous feeder - Folder flap group with hot melt gluing system - Folding tools with automatic transport devices - Paper transport system with adjustable pressure - Automatic delivery table - 1 double-sided tape applicator – minimum interval between two tapes is 35 mm - Material: paperboard 200-600 g/m2, corrugated cardboard up to 4 mm thickness - Minimum paper weight: 150 g/m2 - Maximum paper weight: 350 g/m2 - Speed of glue application: 100 m/min Designed for production: - Straight-line boxes - Crash-lock bottom boxes - Fol ...

Format Range: max. 1450 x 1100 mm min. 700 x 500 mm Equipment: Punch with stripping station, raised, non-stop, Micrometer adjustment, quick-clamping frame in the stripper, Machine hours: approx. 32,000, Processable materials: Carton 0.2-2 mm, Corrugated 0.7-4.5 mm max. punching pressure 400 tons, output max. 5,500 sheets/h

Filling system for sprouted vegetables, consisting of:, - Plate conveyor belt for containers, runs through chamber filler, - Product feed hopper for feed screw, Dimensions feed hopper: L x W x H = 850 x 800 x 400 mm, - Feed screw for product, Distance between the screw flights: approx. 160 mm,, Screw diameter: approx. 320 mm, length: approx. 8000 mm, - Belt conveyor belt make Niko type 02703022, machine number 403980,, blue smooth belt: approx. 2100 mm, usable width: approx. 340 mm, Belt conveyor belt for product transfer from the feed screw to the multihead weigher, - Multihead weigher with 14 heads, corrugated stainless steel sheet, make Klinger, type CW14, opening of the weighing container approx. 140 x 130 mm, - Stainless steel platform for multi-head weigher, Dimensions: approx. 3500 x 3500 mm, plateau height approx. 3000 mm, - Chamber filler TK 12, type 381, machine number 40395/01 ...

General SKU308T739 LocationBarneveld MakeAllgaier Werke TypeWS-GT-0,75 No.280 Year of construction2004 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information CEcheck With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...

Output: max. 80 packs/minute, designed for square cups (101 x 101 x 57 mm),, two lanes,, consisting of the following individual machines:, shell destacking, make Carsoe Anytray Twin Denester, year of construction 2013, volume dosing filler, manufactured by Lieder/Robot Food Technologies, series AWF, type 2, year of construction 2015, for free-flowing, non-sticky products that contain little liquid., min. 15 pieces of product must make up the volume to be filled The machine is designed for processing e.g. vegetable mixtures, rice, pasta, caviar, olives, etc., With lifting and tipping device and corresponding housing, without dispenser for liquid or pastes, self-made, Time-controlled pump for dosing oil, brine or pasty products such as dips or dressings, two filling stations,, tray sealing line, make Multivac type T700, year of construction 2012, Sealing of prefabricated trays, bowls and c ...

Hump shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Material: Punching Waste, Cardboard Punching Mesh, Corrugated Cardboard

BCS Autobox 2600 + Multicut 3, Year 2017,, Max.Sheet width: 2600 mm, Auto set slotting tools, Auto set Creasing tools, Autoset. Tool less size change, Feeder with capacity 300 mm height of blanks, Typical set-time of 1 minute, High speed up to 100m/min, Over 50 Fefco box styles possible, Bmjpclzewxl, Handles singe to double wall corrugated board (max. 10 mm), Touch Screen Control panel for easy programming of new or stored box size and styles

Boxmaker - slotter Make Kolbus - BCS Model Autobox Boxer Year 2016 Minimum size 120 x 500 mm Maximum size 1950 x 8000 mm Corrugated materials single and double flute Thichkness from 1 till 10 mm Slotting length 200 - 500 mm Slotting distance minimum 100 mm Slotting width minimum 7 mm Speed up to 80 meter per minute Available direct

Max. size= 205 x 205 cm, Availability= 012024, Fasson gluing machine Stock type SFAM 716 with display mounting station Suitable for full, shape, edge or strip gluing. A high level of gluing and repeat accuracy of the gluing is guaranteed. Suitable for different backing material - such as open formats, punched blanks, etc. made of corrugated and solid cardboard, rigid foam boards, etc. • Sheet system using driver chains, even for complicated cuts • high register accuracy • Working width: 2,050mm • Performance: 1-lane approx. 4-20 sheets/min; 2 lanes approx. 8-40 sheets/min • Cutting thickness: approx. 0.5 to 20mm • Sheets control • Easy to set and correct the register via the display, even during production Consists of: Fasson gluing machine type SFAM 716 Display work band type 5A/1650 PRESS BAND Type 5/1650_D.4 Mounting station LOT Loaded in truck or container

Brand: KOHMANN Year: 2000 Model: GIANT 1440 Length of cutouts min. 100 mm – max. 1240 mm Width of cutouts min. 80 mm – max. 705 mm Film length min 55 mm – max 800 mm Film width min 30 mm – max 460 mm Film thickness min 0.03 mm – max 0.3 mm Accuracy of depositing the film on the cardboard max. +/- 1 mm Maximum PVC coil diameter 550 mm Internal diameter approx. 75mm Cardboard weight 200 gr/m2 to 2,000 gr/m2. Corrugated cardboard up to 6 mm thick.

Machine Length: 3150mm Machine Width: 1700mm Machine Height: 1200mm Machine Weight: Approx 0.5t MATERIALS All grades of Singlewall Corrugated up to 300 300 B/C Double Wall KEY BENEFITS Handles short runs economically Set up in 15 seconds 600 boxes per hour British designed and built

Automatic Carton Folder Gluer For Processing Straight Line, Crash Lock, 4 Corners Style Cartons, Max. Open Blank Width: 1000mm, Min. Open Blank Width: 56mm, Max Feed Up Length: 600mm, Min. Feed Up Length: 60mm, Convertible Stock Solid 100-600 g/m2, Corrugated Upto E Flute, Operating Speed 20 - 300 m/min., Complete with: - Bottom Belt Friction Feeder, - Pre Fold, - Servo Driven Back Lifter, - HHS Xtrend Glue System with 3 Guns, - Double Trombone with Kicker, - Compression Belt Delivery

Bobst Media 68 II A2 Age: 1989 Format max.: 60 x 68 cm Min. size: 6 x 12.6 cm Material: Cardboard 100-600 g/m2 or Corrugated board N-F and E-Flutes Bottom Glueing Unit for longitudinal gluing Pressing station Tünkers FAS 480 Delivery packing system Optional: HHS-Glueing System with 3x Glueing Guns

Baler Balemaster EO 399, built in 2012, with tamper Specifications: Manufacturer: Balemaster Europe Type: EO 399 Year of construction: 2012 Hours: 60,924 Drive power: 55 kW Press force: 103 t Filling opening: 1000 x 2000 mm Bale dimensions: 800 x 1100 mm Capacity: 211-495 m³/h Binding: 4-fold, automatic Dimensions: 9900 x 2200 x 2450 mm Weight: approx. 20,000 kg Material: Corrugated cardboard, paper, foil The press was serviced annually and the wear parts were replaced. In 2020, the master cylinder was replaced.

Stripping Device, Varioplan System, Mabeg Non-Stop Feeder with Pre-Loader, Non-Stop Delivery, Centerline, Elevated, Sidelays On Operator And Off-Side, Formats: Max. 750x1050mm, Min. 350x400mm, Max. Cardboard Thickness: 1,8mm, Max. Corrugated Cardboard Thickness: 3mm, Speed: 9000 Sheets/Hour

Size: 1850 mm Equipments: F/E/EE/EB/BE corrugated / solid cardboard Straight line glue 3 point / 4 point / special binding Working width min/max 215 mm / 1850 mm Insertion min / max 150 mm / 1200 mm Working width after gluing min / max 140 mm / 1000 mm Motorized format setting folding bottom

Size: 650 x 1020 mm Equipments: Min. film size: 60 x 80 mm Max. paper size: 650 x 1020 mm Corrugated paper thickness: 6 mm Max. working speed: 10.000 sheets / hour Cardboard thickness: 200 - 400 g/m² Max. film size: 300 x 410 mm Film thickness: 0,05 - 0,2 mm Min. paper size: 140 x 140 mm

Size: 500 x 750 mm Equipments: Max. pressure: 200 Tons Max. speed: 10.000 sheets / hour Thickness of corrugated paper: 80 g / m² Heating temperature: 0 - 199°C Heating zone: 10 Max. feeding pile height: 1280 mm Die-cutting precision: ±0.1 mm