129,247 used machines on RESALE, but how to find them? Machine Search
Dimensions (L/W/H): 1050x730x1380 mm Weight: 350 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.
Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm
Corning 048E88-611-31-29 MIC Unitized Tight-Buffered Cable, Plenum, 48fibres,OS2. The roll weighs just under 300kg. Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser, Plenum Cable type Tight-Buffered Product type Distribution Flame rating Plenum (OFNP) Fibre Category single-mode (OS2) Temperature Range Storage -40°C to 70°C (-40°F to 158°F) Installation and assembly 0 °C to 60 °C (32 °F to 140 °F) Operation 0°C to 70°C (32°F to 158°F) Cable Design Central Element Jacketed GRP Fibre Count 48 Number of Active Tubes 8 Subunit Colour yellow Subunit Diameter 4.40 mm (0.17 in) Tight buffer colour subunit Blue, orange, green, brown, grey, white Tensile Strength Elements and/or Armouring - Layer 1 Dielectric strength members Number of ripcords 9 Outer jacket material Flame-retardant Ou ...
Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.
Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.
MF-25 Corner Forming Machine
Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery
Panel thickness (min/max) 5/50 mm Cutterhead rotation speed 30000 rpm Motor power 0,8 kW Table dimensions 320x440mm Milling axis Ø 6 mm Sufficient and constant compressed air Ø 6 mm Power 220 V/50Hz Transport dimensions 720x500x470 mm Weight 25 kg Price 299 Eur (EXW Jonava, Lithuania
An antique corner puncher Made by CHN. Mansfeld of Leipzig Germany about 100 years old. In fully operational condition. No damages; a very nice piece of Graphic history that still can be used today in production.
Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm ixed table Cone SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Weight: approx 8 T
Used Forming and Filling Machine RHEON, Type: Cornucopia KN-550 - Up to 100 product data can be stored - Product weight: 10 - 300g - Ratio between product weight and filling is freely selectable - Machine technically checked and cleaned - Condition: Used, ready to use Visits and test runs are possible by arrangement. An overhaul of the entire machine with warranty is also possible.
Key data: 350 mm, 2 t, 1500 mm
Double decoiler Load - 2 x 1500 kg Belt width 350 mm Coil outer diameter - up to 1600 mm Coil inner diameter - 360-530 mm Manualle hydraul. Spread Pneumat. Pinch roller mechanical brake Dimensions - approx. 2 x 2 x 2.2 m WxDx H Bto - 1000 kg
manufacturer/tradename: Corning 6775 AC/DC input 120 V AC feature CE compliant Parameter 0-3400 rpm speed L × W × H 14 cm × 16 cm × 13 cm For any inquiries, please send an email : f33gmpyahoo.com Attn : Jescica Tan
Dimensions (L/W/H): 800x650x450 mm Weight: 40 kg Total power requirement: 0,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Size: 0x0 Equipments: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth
Technical data for the pallet racking system: Shelving system: Cornix/Duwic Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 22,540 mm Number of fields per row of shelves: 08 pcs Number of levels plus ground level: 02 pcs. The scope of delivery includes: 09x Pallet rack stand, used Material color: blue Profile dimensions: 100 x 80 x 3.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 1,880 mm high 1,000 mm deep 32x Pallet rack trusses, used Material colour: orange Box profile: 100 x 50 mm Truss Type: L215B Agraffe: 6 HK Clear width: 2,705 mm Max. load per pair of trusses 2,300 kg, with the same weight. Distributed load 64x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 32x bolt ancho ...
Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055
Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Model SC-120 Corn cutter provides maximum product recovery, high throughput, low maintenance and automatic corn removal from the cob at high speed. Each ear is placed on the feed through chain, tip end first. The stainless chain moves the ear of corn into the feed rolls. Two sets of feed rolls line the ear of corn up with the cutter head and move the earinto the cutter knives. The cutter knives are automatically openend for cutting by the feed roll gauging sytem. Kernels fall through the head and is discharged to a takeaway conveyor. A water spray is directed into the cuto-off corn area to minimize the starch build up.
Corner round thruster Foellmer HE/F 31; good condition; cleaned and tested; Table equipment; Knife with radius 7mm. Corner rounding machine Foellmer HE/F31; good condition; cleaned and checked; table top machine; knife 7mm.
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
6 denis prive grain silos, D 8 meters, 15 rings a.1.15 m, DIN 1055, catwalks, temperature measurement, Schmidt Seeger trough chain conveyor, elevator etc.
Container corner fitting, container corner, container parts -Number: 18 corner fittings available -Price per piece - Die stamping: DL TR 08 1118 / DL BR 08 1124 -Height: 160mm -Dimensions individually: 178/120/H160 mm -Weight: 11kg/pcs
used
Premix system stainless steel, 30 pieces stainless steel container 600 liters and 400 liters, dosing screws, galvanized steel construction, control cabinet etc.
Silo used approx. 75 m ³ / 75,000 litres polyester silo / GRP silo standing, with or without frame, good condition Dimensions: approx. Ø 3,0 m x 12 m high without frame Bulk density 1, 2 t / m ³, Speidel tank, The container can be used as storage tank for water, liquid food, whey, potato steam skins, molasses, grain, salt, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de
Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.
Horizontal Käde packaging machine
Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)
Corner transfer pallet transport, overhauled 1400x1400 as well as other transport segments, turning segments, corner converters various manufacturers on request overhauled on request
The scope of delivery includes: 01x Stage support, new Manufacturer: SSI Schaefer Design: Corner connection / 90° suitable for CS Sigma profiles with a profile height of 300 mm Type of screw connection: internal Material color: sendzimir galvanized Technical data for the stage carrier: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm
Corner transport table Left-Right Make MBO Model ET46 Year 1995 Width 460 mm Details corner roller table that can be flipped over to turn your products left or right, adjustable in height, new drive belt installed Available direct
used
Grain dryer made of ALU two-column MDB-T 2/9, indirect air heater 2500 KW, heating oil, 2 circulating air fan, exhaust air, dedusted, Weishaupt, trapezoidal cladding Tel. 01715213204
maximum number of results exceeded
please refine your search
400 € 
