coordinate used for sale

Measuring area: 70-300xH 50-H 200mm, max. workpiece weight: 50kg, with Foundation VL-550, dongle and licensed software, without computer, the device was hardly used.

Connected load: 200VA, with documentation, the device was hardly used.

X-travel: 300mm, y-travel: 490mm, z-travel: 290mm, with software and documentation.

Control UMess-300 / Software version 5.10 Travel X/Y/Z 850/1200/600mm switching probe / autom. Button change Accessories: Pushbutton frame with 5 button positions

X-travel: 700mm, y-travel: 450mm, z-travel: 450mm, max. load: 500kg, table dimensions: 1100x820mm, connected load: 1500VA, weight: 1.02t, with documentation.

X-axis: +/-100mm, measuring range: 600x300x200mm, max. workpiece weight: 25kg, the machine is as good as new, an on-site inspection is possible.

X-axis: 1000mm, y-axis: 1500mm, z-axis: 800mm, table dimensions: 1100x1200mm, connected load: 4kVA, control: Pantec pro, length: 3260mm, width: 2030mm, height: 3500mm, weight: 6.6t, operating hours: approx. 16,000h, the machine received new glass scales and a control in 2014, has been regularly serviced, with Renishaw measuring head and documentation, without accessories, can be inspected on site.

X-travel: 380mm, y-travel: 450mm, z-travel: 280mm, max. load: 410kg, probe: Renishaw PH1, length: 890mm, width: 840mm, height: 1370mm, weight: 360kg, with documentation, an inspection is possible.

Number of axes : 6 Measuring lenghth : 1.2 m Software : PCDMIS PRO

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Box tube punch: 50 x 30 mm -Round tube punch -Coordinates stop -Projection: 155 mm -various tool with you -Punch quick change system -Page and depth stops -Max. Punching capacity: 36 t -2x quick change tool carrier -Weight: about 2000 kg

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Measuring range X 500,Y700,Z400 mm Measuring head Renishaw MH 20i Software MCosmos-2 v4.2.R1

Inv. Num. : 7182 Type: Crysta Plus M544 Producer: Mitutoyo Created: 2012 Parameters: Table dimensions: 860 x 638 mm Axis X: 505 mm Axis Y: 405 mm Z axis: 405 mm Max. workpiece weight: 180 kg Machine dimensions: 2185 x 1082 x 1078 mm Machine weight: 440 kg

Control:Renishaw UCC 5.5 Accuracy of the measurement (4,5 + L/200) ?m Manual Probe Heads Renishaw MH20i Axis travel range: X 700 mm Y 700 mm Z 500 mm reference sphere included Erowa clamping system is available Made in Italy

spindle diameter: 110 mm x-travel: 900 mm y-travel: 600 mm cross rail adjustment - vertical: 635 mm quill travel: 200 mm column daylight: 950 mm max. distance between table and spindle-nose: 15 - 850 mm table surface area: 1020 x 860 mm table load: 800 kg speeds: 10 - 2500 U/min adjustment speed: 5 - 2500 mm/min tool taper: ISO 40 electrics - voltage/frequency: 380/50 V/Hz total power requirement: 8 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4,9 x 2,9 x 3 m - 2 axis digital-readout ELESTA - with misc. tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4906 Type: Poli Galaxy SL4 Producer: Wenzel Created: 1996, GO Parameters: Axis X: 1200 mm Axis Y: 1500 mm Z axis: 700 mm Control system: Metrosoft CM 3.9 Sensor head: PH10M Sensor Type: TP20 Touch the diameter: 6 mm Touch length: 25 mm Software: WPC 2010 Machine dimensions: 2700x2200x2900 mm Weight: 4 t Last calibration: 14.12.2018

Description: Serial number: G100329 Table dimensions: 1570 x 910 mm Measurement range: 1000 x 600 mm Including calibration ball and a probe from the manufacturer RENISHAW Converted to WENZEL in 2008 Software: CM2015 Capability to measure surface forms, curves weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,900 x 2,300 mm

Description: Travel distances: X-axis: 457 mm Y-axis: 508 mm Z-axis: 406 mm weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,700 mm

Description: Serial number: 0077806 Measuring range: X-axis: 500 mm Y-axis: 700 mm Z-axis: 400 mm Max. workpiece weight: 180 kg Max. workpiece height: 510 mm MPE (E) = (3.5 + 0.4 L/100) micrometers at tp 20 MPE (E) = (4.5 + 0.4 L/100) micrometers at tp 8 Temperature range: 19°C - 21°C Table dimensions: 638 x 1160 mm With accessories as shown in the pictures weight approx.: 615 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 1,080 x 2,350 mm

Description: Including measuring probes, operation, calculator z-motion: 700 mm, x-motion: 1,000 mm, y-motion: 700 mm, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,400 x 2,700 mm

Description: Table size: 95 x 80 mm Approx. Onsite Dimension. (l x w x h): 350 x 350 x 200 mm, weight approx.: 6 kg

Description: Serial number: 48120321 Incl. PC system, keyboard, mouse and 21.5' LCD monitor Software: MCOSMOS, parts manager GEOPAK manual Incl. MH20i manually indexed sample head Incl. ceramic calibration sphere Incl. starter kit: steel pins with ruby: dia 1 x 10 mm, dia 2 x 20 mm, 3 x 20 mm, 4 x 20 mm and 2 extensions: 10 mm and 20 mm for changing Panel dimensions: approx. 1200 x 840 mm Travel distance X: approx. 600 mm Travel Y: approx. 550 mm Z travel: approx. 400 mm weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,150 x 2,200 mm

weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 8,700 x 3,300 x 3,600 mm

Description: Travel distances: X: 3406 mm Y: 815 mm Z: 1049 mm Table dimensions: 4000 x 2000 mm The machine is equipped with a digital display from the manufacturer 3D-LASERTEC The machine has been serviced annually and is still in a very accurate measuring range Attention: the articles on the measuring plate are not included in the scope of delivery weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,700 x 2,400 mm

Description: Composed of: - Machine body dimensions 2015x1700x2843 mm - Desk with pc, monitor, HP printer , - External unit ZEISS ACCURA MASS/B, 1600 VA - ZEISS control console - ZEISS calibration sphere - Exchange magazine with Contact Probing System heads and 1 Optical Probing System head - Complete with user and installation manuals , - Complete with instruction manual for CALYPSO software - Various boxes and packaging for component storage  , NOT INCLUDED, EXCLUDED FROM SALE, VISUAL MICROSCOPE z-motion: 700 mm, x-motion: 900 mm, y-motion: 1,200 mm, control: PC, software: CALYPSO, table surface area l x w : 1500x1150 mm, daylight: 1,100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 2,015 x 2,843 mm

Description: Serial number: 9906116120 Without computer and license z-motion: 200 mm, x-motion: 400 mm, y-motion: 200 mm, weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 900 x 2,000 mm

Description: measurement range: X-axis: 700 mm Y-axis: 700 mm Z-axis: 600 mm max. ,acceleration for each axis: 1.333 mm/s2 max. ,measurement speed: 8 mm/s measurement resolution: 0.1 µm work table dimensions (length x width): 860 x 1420 mm max. ,permissible length measurement error MPEE0: 1.7+3 L/1000 µm measurement error of the shape of a single MPEPFTU measuring pin: 1.7 µm max. ,permissible measurement error of MPETHP scanning: 2.3 µm (50 s) travel speed: driving mode: 0-80 mm/s slow mode: 0-3 mm/s measurement mode: 0.05 mm/s CNC mode: 8-300 mm/s max. ,detail weight: 800 kg max. ,detail height: 800 mm z-motion: 600 mm, x-motion: 700 mm, y-motion: 700 mm, table surface area l x w : 860 x 1420 mm, weight approx.: 1,700 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,800 x 2,800 mm

Measuring range 1000,1200,600 mm Measuring Head type VAST XXT Software CALYPSO 2017 Version 6.4.02

weight of the machine ca.:3 t measurement range X =:650 mm measurement range Y =:1200 mm workpiece weight:700 kg traversing speed:200 mm/s capacity:1000 VA Design: Portal measuring center with fixed measuring table and laterally driven portal, measuring table, traverse and quill made of granite. All axes are equipped with high-precision air bearing guides. It is driven by DC servo motors. Control: 3-5 axis microcontroller with vector path control Measuring system: Incremental length measuring system, resolution 0.5 m Computer: Industrial PC, Pentium class, Windows 2000 operating system, multilingual Software: MarSoft Vision 3D multisensor 3D, measuring software

Measuring range X/Y/Z: 1000mm/1200mm/800mm, measuring head: Renishaw motorized rotary and swivel head with measuring probe model PH10M (without probe), control: Wenzel CNC controller WPC2040/3, software: Metrosoft CM 3.112. Panel: hard stone, panel dimensions X/Y/Z: 2400mm/1440mm/500mm, space requirement: 17m², weight: approx. 5500kg. Including manual control panel, PC and monitor. Documentation available. On-site inspection is possible.

Schlatter coordinate Orion Flex Range: 1350 x 600 mm MY: 2003

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

GeneralTurning-milling centre; Control: Fanuc 31iB5 CharacteristicsSwing- Ø, max.1070 mmDrive power milling spindle22 kWDrive power second spindle22 kWDrive power main spindle22 kWNumber of Toolmagazine positions50 Speed max.8000 rpmSlewability of B-Axis1 degreeMovements X / Z / Y1040/+-330/3150 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,0001 degreeBar diametre164 mmSpindle speed 2nd Spindle max.1500 rpmInput precision of C-axis on Mainspindle0,0001 degreeBar diametre164 mmSpeed max.1500 rpmMax. Turning Length3076 mmMax machining diameter1070 mmWeight approx.46000 KgTool spindle full indexing specificationsErhöhung der mögl. Indexierung der B-Achse auf 0,0001º Einrichtung zur Positionierung der B-Achse mit einem minimalen Winkel von 0,0001º anstelle der Standardausführung mit 1º, einschließlich der Option Direktes Wegmesssystem in der B-Achse derSp ...

x-travel: 1000 mm y-travel: 3000 mm z-travel: 2000 mm Overall size: 4,5 x 4 x 5,2 m machine weight ab.: 8,5 t 3D measuring machine, Leitz/Hexagon, type PMMF1600 / M00-211-300, Equipment/ Accessories: - div. probes - div. accessories - overhead design, - used as a coordinate measuring machine, - gear measuring center, - form tester, - roughness measuring device, - measuring range approx. 3,000 x 2,000 x 1,600 mm, - resolution 5 nm, - control panel, PC, Dell, Intel Core i5 processor, 2 20 monitors Dell, The PMM-F is specially designed for the inspection of medium-sized components and gears. This 3D measuring machine is designed in an overhead construction and serves as a coordinate measuring machine, gear measuring center, form tester and roughness measuring device. Area of application: Inspection of medium-sized components and gears Design: Overhead design Functions: Coordinate measuring ...

:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position  ...

:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mm PLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower mainten ...

No. 0104: 1 gebr. Universal copy milling machine Fabr. COVER, type KF 3 S, b. 1979 with split coordinate table ARB.-ber.: 700 x 560 x 450 mm, power: 3 kW Accessories: Coordinate table (new price about â?¬30.000,00) Simple spindle; Locking arm, control handle with cable, stylus holder, collet chucks Other: 3 m x 3 m space; weight ca. 2.380 kg

Coordinate Measuring Machine 6-Axis Zett Measuring AMPG 3600 Precision Zett Mess Coordinate measurement technology Type AMPG 3600 Precision 6-axis measuring joint arm Magent foot and tripartite Laptop with software

FARO EDGE 2.7 M coordinate measuring arm was built in 2014. The efficient and productive portable measuring arm verifies the quality of workpieces of any shape by measuring components in 2D and 3D with an accuracy of ± 0.017 mm. The mounted measuring head and the non-contact laser scanning function also allow for comparative analysis of individual components and assemblies with CAD files. The machine has been designed with convenience and ease of use in mind, as evidenced by the excellent weight distribution and balance maintained. The FARO EDGE measuring machine consists of: – a 2.7 metre long measuring machine with base plate and probe, – battery and cables, – a removable handle, – a non-standard case (hard case). Applications of the FARO EDGE 2.7 M machine - measuring and verifying the dimensions of machine parts of any shape - measurement of shape deviation and c ...

TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...

Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...

Swing arm grinding machine make JÄGER type UMA 19Order number. 4156, make -No: 6179, built in 1971Technical specifications:Grinding area at coordinate tableDisplacement approx. 240 x 300 mmMovement of the coordinate table: 150 mmMax. Sanding height approx.: 220 mmCup wheel diameter: 150 mmDrive motor 380 V, 2800 rpm. approx.: 0.8 kWSpace requirement: 450 x 870 x 1700 mmWeight approx: 320 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electronic module, coordinate measuring board ZEISS 608483-9103.730 608483-9003 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Cross table controlled, cross table NC, coordinate table, LM guide actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel path: x= 310 mm / y= 500 mm / z= 125 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg

Bluthardt, VRB 6/20 Drill with coordinate table, with digital display DRO- 3 axis , Year of construction: 1980, very good condition, to be visited under electricity Adapter SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, clockwise - counterclockwise, Stroke: 200mm, upper part adjustment electr. 500mm Projection : 500, Coordinate table: clamping area 600x400m, X-660, Y-450mm