cooling used for sale

Cat-Nr. 12-2765 in a very good condition With Cooling Jacket Surface: Outside and Inside: 2B=IIIC Upper Bottom: With Manhole Lid round 400 mm with Clamp With Inlet Connector DN 25 Tank Body: Mit Threaded Connection for Cooling Jacket DN 23 Lower Bottom: With Flat Conical Bottom with Central Outlet With Outlet Discharge DN 65 reduced to DN 50 Butterfly Valve With Threaded Connection with Outlet on Cooling Jacket DN 15 Measurements and Weight: Height x Diameter: 1560 x 1220 mm Height Tank Body: 960 mm Weight: 270 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

EWD ESTERER HD_30 SV high in TOP ZUSTAND ! Repairs 2009, with power Pos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mm speed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: right pressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaet ...

Storage Tanks / Pressure Tanks / Beer Tanks in V2A with cooling jacket Test pressure: 2,86 bar, Operating pressure: 2 bar Volume: 1500 Litres -NEW- Measurment and Weight: Total Height: 2609 mm Cyl. Height: 1500 mm Diameter: 1100 mm Weight: 290 kg Material: V2A (AISI 304) 1.4301 Upper bottom: • with manhole Ø 400 mm with 4 x screw • with 2 eyelets • with ventilation system DN 50 • with CIP-cleaning • with downward drawn filling pipe DN 32 with fermentation connector with overpressure valve, with manometer (on extra charge) Tank cylinder: • with ladder hook up • with cooling jacket h=1000 mm • with sample valve DN 15 (on extra charge, with spiral in stainless steel also available) • with immersion socket for temperature indicator and temperature indicator (on extra charge) • on the back of the t ...

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body: - with cooling jacket 843 mm - connections for cooling jacket on the back inlet 1/2, outlet 1/2  ...

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

Operating and consumption data: Product: Apple juice Water evaporation 31,550 kg/h Inlet: Quantity 36,000 kg/h Concentration approx.8.9 °Brix Temperature 10-20 °C Pre-concentrate for embellishment: Quantity approx.16,000 kg/h Concentration approx.20 °Brix Temperature approx. 50 °C Expiration: Quantity 4,450 kg/h Concentration 70-72 °Brix Temperature 55 °C after cooling 10-15 °C Aroma: Quantity (!:150)ca 240 l/h Temperature approx. 4 °C Steam consumption (5.5 bar ) for preheating and evaporation approx. 7,000 kg/h Cooling water consumption (26 °C) for condensation and cooling approx.250 m3/h Ice water consumption (1°C) for aroma recovery approx. 4-5 m3/h Operating water (15 °C) for vacuum pumps approx. 3 m3/h Electrical energy approx.80 kW

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

Used, plug-in AHT Paris freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm) available in large numbers immediately from stock. The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your individual  ...

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

1pcs Ciat waterchiller type:LDH800V R410A Year 2011 cooling capacity: 209.9 KW 1pcs Ciat waterchiller type:LDH400V R410A Year 2009 cooling capacity: 102.6KW 1pcs Ciat waterchiller type: LD 1100V-STD Year 2013 Cooling capacity: 291.5 KW

Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

CTS climate test cell Walk-in test facility Here we offer you a CTS climate test cell. CTS climate test cell type TW -60/20 T means: Temperature W means: Walk in -60 means: lower temperature -60 °C 20 means: 20 m³ test room volume Plant description: With the temperature test cell, the function or material property of a test material can be tested under temperature influences. The system is divided into the test chamber including the machine compartment and a control station including a lock. The lock can be tempered independently of the control station or test chamber to minimize moisture input when entering the test chamber. The vertical air flow with a correspondingly high amount of recirculating air guarantees a good temperature transfer to the test material. The air treatment room is located at the back of the interior. To the left of the system, the units are located ...

Machine details Bearing number 1105-03062 Machine type Machining center - Horizontal Make MAZAK Type FH 680 Built in 1997 Control type CNC Warehouse FRANCE Country of origin Japan Delivery time immediately Freight base from location Technical details x-way 1050 mm y-path 800 mm z-way 880 mm Control MAZATROL M plus Pallet changer type 2-fold Pallet size 630 x 630 mm Tool changedevice 40 Tool holder bt 40 Table load 1 t Pallet change time 6 sec Rapid response 40 m/min Feed 1-40,000 mm/min Speed 35-7000 rpm Drive power 30 kW Workpiece dimensions max. 1000X 1000 mm Tool diameter 135/260 mm Tool length - max. 500 mm Tool weight max. 7 kg Total power requirement 45 kVA Machine weight approx. 15 t Space requirement approx. 19 m2 Information High-pressure cooling by spindle 20 bar MAZATROL m plus Synchronous thread cutting NC Round table 0.001° x 360,000 p ...

Key data: 170 , 400

TRIOGEN E-BOX ORC for sale. Model: E-BOX ORC Year: 2017 Hours: 0 Capacity: 170 kW Hz: 50 Voltage: 400 V Scope of supply : Complete ORC E-Box. The E-Box is primarily an E-Box 170kWe Power, but can be also an E-Box 170 CHP (Vario). General Information: E-Box 170 Power – this is when the working fluid condensing (cooling) temperature is at 55degC, this is specific to recovering hot gas at around 500degC (engine exhaust for example). To achieve full power (170kWe gross), the cooling water needs to operate at 55degC, this generating maximum power of 170kWe refer to graph given at cooling temp of 55degC = 170kWe. Price: £240,000

EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Fully refurbished Probat UG22 with chaff cyclone. Main features: Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG - modulated burner - separate Siemens motors for every function (drum, exhaust fan, cooling tray arms, cooling fan), enables to roast and cool simultaneously - speed controlled motors on the exhaust fan and drum for maximum control over the roasting process - two digital thermocouples (bean temperature and exhaust temperature) - analog thermometer in the exhaust - new control cabinet with buttons for all the functions doubled by an 10inch touch screen display - Artisan and Cropster connection through RJ45 ethernet cable/socket - new stainless steel cover - new stainless steel cooling tray sheathing - new insulation of the drum - new  ...

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Barth Type : NR 3000 batch roaster Year of made : 2000 Output /h approx. : between 800-1250 kg Nuts Consisting off : Plant components: - Hopper for nut roasting machine NR 3000 (650kg whole nuts), with scale - Nut roasting machine NR 3000 batch size 400-620kg/batch, roasting time 20-40min) - Roasted air conditioning - HWP cooling system - Cooling air supply - increased stand frame - aspiration device stand frame - aspiration device cooling zone - thermal exhaust gas cleaning system TNV 8000 (8000m³/h, residual content in the clean gas 50mg/C/m³) - Exhaust pipe TNV - free-standing 2-way steel chimney system (height 21500mm, outside diameter 1450mm, 2 pcs. Stainless steel inner pipes 500mm) with thermal insulation - Fully automatic control unit As well as all pipes, p ...

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

CNC Radial Forging Machine GFM mod. SXL-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipu ...

PROFROID FCTE 90 20 MDB AC V2 Brand:PROFROID Type:FCTE 90 20 MDB AC V2 Stock number:M23-3321 Cooling capacity:1,838 kW Application:Cooling Number of fans:20 Refrigerant:Water / Glycol Refrigerant Content:458 kg Voltage:400 Volts Motor power:20x 1,85 kW Dimensions:11470 x 2200 x 2500 mm Weight:4,100 kg Year:2x 2016 / 1x 2018 Number in stock:3 piece(s) Price: Quotation request Description: Very young and nice V-Block dry coolers with 20 fans. Two coolers are from 2016 and one cooler from 2018. The cooler from 2018 is equipped with water spraying system (adiabatic cooling), so it has more power (± 2400 kW). Mentioned capacity at a water temperature of +45/40°C and an ambient temperature of +30°C and 34% Glycol. Visit our website: used-refrigeration

Double chamber furnace, make Cieffe The furnace consists of: - 1 nitriding chamber with an operating pressure of 0.5 bar, - 1 quenching chamber with an operating pressure of 15 bar, - 2 cooling chambers, each equipped with an air/water heat exchanger, with a working pressure of 15 bar. The cooling chambers are installed above the quench chamber. The nitriding chamber and the quenching chamber are separated from each other by two sealed doors. type: NCV refurbished year: 2003 connected load: 436 kVA charge weight: max. 2,500 kg usable dimensions (W x H x D): 910 x 800 x 1300 mm type of heating: open flame gas burner heating areas: 2 heat output: 235 kW operating temp.: max. 700°C vacuum: 2.5 x 10-2 mbar pump capacity: 250 m3 / h quench pressure: 15 bar cooling gas: N2 / 190 m3 / h

x-travel: 11200 mm y-travel: 3130 mm z-travel: 1000 mm Control: NUM 1060 W A-axis: +- 120 ° c-axis: +215/-210 ° spindle motor: 15 kW spindle taper: HSK-F63 turning speeds: 24000 U/min table width: 1500 mm table length: 9400 oder 2x3000 mm total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 14,6x5,0x4,225 m Use: e.g. for processing aluminum panels, drilling profiles, advertising (signs milling, etc.), mold construction (prototypes) and processing of light steel frames / -beams using HSC milling The vertically arranged high-frequency milling spindle for automatic Tool change is mounted in a fork head on the Z-axis plate. The Spindle can be moved with the fork head in 2 NC axes, in the A axis and the C-axis. The vertical movement is carried out via the Z-axis. Liquid cooling via a cooling unit. Tool magazine: moving plate changer in the potal, outsid ...

Machine type: TIG inverter welding system water-cooled direct and alternating current system Make: Merkle Type LogiTIG 300 AC/DC Serial No. 123.146 Connection voltage 3 x 400 volts Setting range 3 – 300 amps Duty cycle 50 % d.c. at 300 amps 60% d.c. at 280 amps 100% d.c. at 250 amps Current adjustment infinitely variable max. weldable material thickness steel / VA = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 32 amps Special accessories touchpad, display cover Connection for water cooling Carriage Dimensions L x W x H 670 x 240 x 1,025 mm Weight 67 kg Age: 4 years Condition: workshop-tested, very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable  ...

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

YORK YVWA MEME FFBE 0900 SAX Brand:YORK Type:YVWA MEME FFBE 0900 SAX Stock number:M23-4637 Cooling capacity:900 kW Application:Cooling Refrigerant:R513A Refrigerant Content:2x 130 kg Voltage:400 Volts Power consumption:237,5 kW Dimensions:4200 x 1405 x 1825 mm Weight:5926 / 6540 kg Number in stock:3 piece(s) Price:On request Description: New unused water-cooled York water chiller with 2 frequency-controlled screw compressors distributed over 2 cooling circuits. This chiller is equipped with a hybrid falling film evaporator and runs on the new refrigerant R513A. Mentioned capacity at a water temperature of +12/6°C (in/out). Visit our website: used-refrigeration

COMPRESSORS SAMSUNG YOM: 2014 Models: SM5000-1000; SM5000 Equipment Summary: Turbo Compressor - 5 units: SN1:CE0518M102 Yr.2014; SN2:3210344-30 Yr.2008; SN3:3210344-40 Yr.2008; SN4:3210344-20 Yr.2008; SN5:3210344-10 Yr.2008 Air Dryer - 8 x 3.6cu.m drying towers - 4 units C/Water Pump - 55kW/75Hp - 7 units Receiver Tank - 20.3cu.m - 2 units Cooling Tower - 1,560,000Kcal/hr - 1 unit Cooling Tower - 250RT - 1 unit Cooling Tower - 400RT - 3 units Control Panels Accessories/other items: Spare parts: Dryer Heater Flange, pump motor spring mounts etc. Filters Connecting pipes Weight: 45.800,00 Capacity: 7200Ncu.m/hr; 1250hp x 1 unit; 1100hp x 5 units Make SAMSUNG Serial SN1:CE0518M102 / SN2:3210344-30 / SN4:3210344-20 / SN5:3210344-10 SN3:3210344-40 Model SM5000-1000; SM5000 Year 2014 Capacity 7200Ncu.m/hr; 1250hp x 1 unit; 1100hp x 4 units ...

Thermotron Environmental Test Chamber Here we offer you a Thermotron environmental test chamber. Thermotron Environmental Test Chamber Water-cooled Working range volume: 227 litres Temperature uniformity: All models 0.7°C Temperature range: -70°C to + 180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: width 610 mm x depth 610 mm x height 610 mm External dimensions width 890 mm x depth 1240 mm x height 1850 mm Humidity Range: All models 10% to 98% RH Humidity Control: All models 2.5% RH Heating capacity in minutes -65º to 71ºC: 17 Heating capacity in minutes -65º to 180ºC: 43 Heating capacity in minutes -40º to 85ºC: 16 Electrical requirements in full load amplifiers 230/3/60: 19 Electrical requirements in full load amplifiers 230/1/60: 25 Electrical requirements in full-load amp ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

Key data: 1095 , 400

COMPLETE TRIGENERATION PLANT INCLUDING CHILLER AND COOLING TOWER Make and Model: JENBACHER 320 G.S N-L Fuel: Natural Gas Capacity: 1095 kW Year: 2007 Hours: 50,000 HZ: 50 V: 400 30,000HR MAINTENANCE SERVICE PERFORMED IN 2017 ON 28,000 hrs. Replaced 20 Cylinder Heads, Pistons complete with Piston Rings, Cylinder Liners Replaced Main Bearings Replaced Intercooler Overhauled Turbocharger, done by a specialist company Overhauled Plate Water Heat Exchanger, done by specialist company Camshaft checked and is in good condition Other works and checks not listed were carried out according to the GE Jenbacher schedule. Scope of supply: Gas engine genset, 2 x cooling tables, Gas line, Control panel, Switchgear, Silencer, Chimney, Piping, Power cables, Control cables, Chiller and Cooling Tower. Available for Sale Now. Price: 100,000€

turning speed range: 1800 U/min drive motor: max. 44 kW tool adaptor: ISO 50 distance spindle - column: 460 mm Torque: 3180 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRANE CGAX 026 SN LN Brand:TRANE Type:CGAX 026 SN LN Stock number:M23-4654 Cooling capacity:74 kW Application:Cooling Number of fans:2 Refrigerant:R410A Refrigerant Content:10,5 kg Voltage:400 Volts Dimensions:2346 x 1285 x 1750 mm Weight:608 kg Year:2018 Number in stock:1 piece(s) Price:Quotation request Description: Air-cooled Trane water chiller with 2 scroll compressors on 1 cooling circuit. This water chiller is equipped with a Trane controller and 2 fans, 1 of which has a built-in speed controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Visit our website: used-refrigeration

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Water chiller CIAT LXH 1850Z chiller with cooling capacity 365 kW with hydraulic module | ChillerTech - Used chillers available from stock! Basic information: -Manufacturer: CIAT -Model: LXH 1850Z -Cooling capacity: 362 kW at 12/7 oC at 35 oC outside -The refrigerant used, as well as its quantity: R407C / circuit A – 55.0 kg / circuit B – 25.0 kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of manufacture: - -Connection stubs: 5" flange connection -Number and also type of compressors: 2 pcs. Bitzer semi-hermetic screw compressor -Additional information: hydraulic module (buffer tank and Salmson double constant flow water pump) -Quantity: 1 piece Device available immediately Check out our other cooling/heating equipment...

Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts! Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...

Water chiller Clivet WSAT-XSC352 86.5 kW with hydraulic module | ChillerTech - Used chillers Basic information: -Manufacturer: Clivet - Model: WSAT-XSC352 -Cooling capacity: 86.5 kW (standard conditions according to suppliers' conditions) - Air-cooled unit -Refrigerant used as well as its quantity: R410A | section A – 21.0 kg -Number of refrigeration circuits: 1 circuit -Operation Mode: Cooling Only -Year of production: 2009 - Dimensions: length: 2850 mm | width: 1115 mm | height: 2210 mm +/-5% -Operating weight: 1051 kg -Quantity: 1 piece -Hydraulic module (circulating pump): Yes Device available immediately Check out our other cooling/heating equipment...

Water chiller CIAT LXH 1850Z chiller with cooling capacity 365 kW with hydraulic module | ChillerTech - Sale and rental of water chillers Basic information: -Manufacturer: CIAT -Model: LXH 1850Z R407C -Cooling capacity: 365 kW at 12/7 oC at 35 oC outside -The refrigerant used, as well as its quantity: R407C / circuit A – 55.00 kg / circuit B – 25.0 kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of production: NO INFORMATION -Connection pipes: 5" flange connection – DN125 -Number and type of compressors: 2 pcs. Bitzer semi-hermetic screw compressor -Additional information: hydraulic module (buffer tank and 2x constant flow circulation pump) -Dimensions: width – 2200 mm ; length – 5289 mm ; height – 2200 mm -Weight: approx. 5806 kg Device available immediately Check out our other cooling/heating equipment...

Water chiller Industrial chiller WR-10AC with cooling capacity 30 kW with hydraulic module | ChillerTech - Used chillers available from stock! -Manufacturer: Industrial chiller -Model: WR-10AC -Cooling capacity: 28.6 kW at 12/7 oC at 35 oC outside -The refrigerant used, as well as its quantity: R407C / circuit A – --- kg / circuit B – --- kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of manufacture: 2020 -Connection stubs: flange connection --- -Operating range: from 5 oC to 35 oC -Number and also type of compressors: 2 pcs. Hermetic scroll compressor -Additional information: hydraulic module (water pump and buffer tank in open version) -Dimensions: width – --- mm ; length – --- mm ; height – --- mm -Weight: approx. 1000 kg Device available immediately Check out our other cooling/heating equipment...