cooling used for sale

Trane ECGAL 800 Water Chiller Chiller with 200 kW Cooling Capacity | ChillerTech - Used chillers available from stock! Basic information: -Manufacturer: Trane -Model: ECGAL 800 -Cooling capacity: 200 kW at 12/7 oC at 35 oC outside -Refrigerant used and its quantity: R407C / circuit A – 21 kg / circuit B – 21 kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of production: 2000 -Connection pipes: 2 1/2" thread – DN65 -Operating range: -8 oC to 45 oC -Additional information: water pump: NONE -Number and also type of compressors: 6 pcs. Danfoss scroll compressors -Dimensions: width – . mm; length – . mm; height – . Mm -Weight: approx. 2000 kg Device available immediately Check out our other cooling/heating equipment...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

Process water chiller / chiller / chiller water cooled, Type: TWEevo Tech 381 P3 MTA S.p.A. TWEevo Tech 381 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 72.2 [20.5 tons cooling] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 12.3 Available pump pressure (bar) 3.46 Cooling water temp. Outlet/Entry (°C): 45 / 40 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 39 Max. current (A) 66 Starting current circuit (A) 234 Protection class: IP54 Dimensions: Length (mm) 2790, Width (mm) 1150, Height (mm) 2020, Weight empty / filled (kg) 975 / 1385 Connection R ...

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Liebherr Commercial Refrigerator Gkv 4360-20 Execution: Cooling Type: Cooling Operating mode: Convection cooling Door hinge: right Door design: solid door Inside white plastic Cleaning procedure Galvanized grates Large capacity SwingLine door with bar handle Replaceable door hinge Replaceable gasket Humidity adjustable Digital Door & Temperature Alarm Automatic defrosting Materials: Material: Stainless Steel Inner material: plastic Replaceable door hinge Climate & Environment: Energy efficiency class: D Energy consumption: 2,031 kWh/24 hours Refrigerant: R 600 a Product Identifications: MPN: GKv 4360 EAN code: 9005382196519 Temperature info: Temperature range: +1°C to +15°C Contents: Volume: 434 ltr Weight info: Weight: 72 kg Device connection: Connected load: 100 Watt Mains voltage: 230 volts Metrics: Length (width): 680 mm Dept ...

Bitzer compressor unit Type: 3 x HSN 7471-75-40P, 1 x HSK 7471-90-40P Volume: 4 x 250m Cooling capacity for compressor unit HSN (X3) R404A: 480 kW at -10°C/40°C, 360 kW at -20°C/40°C Cooling capacity for HSK7471(R404A): 145 kW at -10°C/40°C, 93 kW at -20°C/40°C Cooling capacity for HSN7471(R404A): 160 kW at -10°C/40°C, 120 kW at -20°C/40°C Dimensions: 5000 x 1500 x 2100 mm Reference number: Z26 Pieces in stock: 1 Condition: Used

Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Months ...

Flash Pasteurizer GEA MICRO 50hl/h for Beer This flash pasteurizer was manufactured in 2018 by GEA Denmark for beer pasteurization and it will soon be dismantled professionally. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a service tank for water during CIP process, heat exchanger, holding / pasteurization tube, control cabinet ...

Code: 0260 Brand: OMMA Model: FTF 1400/2M - CE Standard Automatic 4 rollers glue spreader for wood panels, laminates, technical panels, foam, soundproofing, plasterboard, doors etc. - CE Standard Technical data: Rigid and solid frame Working width mm 1360 Max working thickness mm 80 Working table height mm 905 Diameter of rubber coating rollers mm 250 Diameter of dosing rollers chromium plated mm 185 Installed power Kw 1,1 Dosing rollers chromium plated. These rollers can be easily cooled with cooling device "CRIO" Electronic variable working speed with display Analogic dial of the distance between the spreading rollers with 1/10 mm reading precision High uniformity of the spreading on full working width Motorised rotating disc ejector Stainless steel collecting tank of the cleaning water Cooling device "CRIO" to maintain the original glue characteristics in term ...

Manufacturer Laser: Trumpf Type Laser: TruDisk 4002 Year of construction Laser: 2009 380 V -10% ... 460 V +10%; 3AC + PE Operating hours: 74877 h Power: 21 kW / 22 kVA Connection: 32 A / 400 V Weight: 850 kg Manufacturer cooling unit: Riedel Type cooling unit: RW 27/0 SR Year of construction of cooling unit: 2019 Regularly checked and maintained (last 08/2021) We will be happy to send you further information on request.

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form ADNC rotary table with pallet changerType of Measuring system Direct measuring systemTool magazine,chain, 60 pocketsTool magazine chain magazin ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmTool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper MiscellaneousClamping SystemHSK-A 63 Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring s ...

turning speed range: 3000 U/min tool adaptor: ISO 50 drive motor: 22 kW distance spindle - column: 358 mm Tool bore: DIN 69871 Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min tool adaptor: ISO 40 / 50 drive motor: 11 kW distance spindle - column: 316 mm Tool bore: DIN 69871 Technical specifications • Bodies arranged at 45° with respect to each other. • Maximum transmissible torque from 550 Nm to 3.180 Nm. • Maximum speed from 1.800 rpm to 3.000 rpm. • Automatic clamping of the tool, driven by a hydro-mechanical system. • Standard tool taper DIN-2080 / 69871 and pull stud DIN-69872 (possibility to manufacture for other types). • Spindles and gears are made of case-hardened and tempered chrome-nickel. • High-precision angular contact ball bearings. Optionally • Cooling of bearings of the spindle, maximum speed up to 4.000 rpm (only for VAR-3 and VAR-5 head models). • External tool cooling. • Internal tool cooling, type AD, with rotary joint. • Air jet for cleaning the tool tapper. The data for  ...

Boiler capacity: 270l; Volume flow rate: 680l/min; Motor power: 5.5 kW; Refrigerant dryer: Yes; DESCRIPTION The two-stage compression 2-cylinder high-performance unit achieves a very low speed, resulting in particularly smooth and low-vibration running This ensures a longer service life due to less wear and Large fan wheel and a cooling air deflector on the cylinder for optimal compressor cooling Aftercoolers with cooling fins and intercooler to the aftercooler ensure a low tank inlet temperature and thus less moisture in the compressed air quality electric motor with high tightening torque electric motor equipped with motor protection switch With high-quality CONDOR pressure switch Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain tap Ten years warrant ...

Driven tool holder for heavy cutting with 80 bar internal cooling and switchable between internal cooling / external cooling / or both together can be ordered by many manufacturers

BLUE BOX Tetris 16.2 LN Brand:BLUE BOX Type:Tetris 16.2 LN Stock number:M23-4607 Cooling capacity:160 kW Application:Cooling Number of fans:2 Refrigerant:R410A Refrigerant Content:23 kg Voltage:400 Volts Power consumption:59,7 kW Dimensions:2302 x1158 x 2397 mm Weight:998 kg Year:2009 Number in stock:1 piece(s) Price: Quotation request Description: Nice air-cooled Blue Box water chiller with 2 scroll compressors and 1 cooling circuit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Visit our website: used-refrigeration

x-travel: 8000 mm y-travel: 1500 mm z-travel: 2500 mm Control: Heidenhain Itnc 530 total power requirement: 96 kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Brand: CORREA/ANAYAK Typ: HVM 80 Build in : 2014 travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindel : max. 6000 Rpm Spindelpower 28 Kw as extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 kW, table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T- slots 250 mm, table load max. 15,000 kg/m², distance spindle - column max. 1,675 mm, feeds X/Y/Z max. 30,000 mm/min, Total power 96 Kw machine weight 55,000 kg, column 12,000 kg, platen 16,000 kg, 2x CNC screen control, make Heidenhain, type CNC I 530, autom. tool changer, chain type, max. 60 tools, tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, radio manual control panel, make Heidenhain, type HR-550, telediagn ...

- X: 1300 mm - Y: 1300 mm - workpiece dimensions: 1500 x 1500 x 135 mm - Repeatability: 0.025 mm - Wavelength: 10.6 microns - Operating hours: laser 6135, engraver 18,743 h - Space requirements (W x D x H): 2.4 x 2.0 x 1.4 m - Total power: 2.3 kW - Machine weight: 1200 kg - Condition: good Details Type: Co² laser, RF 3000 controller, Synrad evolution 100 laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminium support, processing surface: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, software JobControl from Trotec 10.7.1 Accessories Cooling unit

Boiler capacity: 270l; Flow rate: 520l/min; Motor power: 4 kW; Refrigerant dryer: Yes; Stationary compressors with vertical 270 l tank Maximum performance in the tightest of spaces. Robust equipment and best quality Fully automatic on-switch operation With all safety devices Completely ready for connection  From 7.5 kW as standard with automatic star-delta switch  Fifteen-year warranty against rust penetration on inside and outside hot-dip galvanized compressed air tank quality electric motor Quality electric motor with high tightening torque is equipped with a motor protection switch start-up capacitor and start-up relief valve ensure easy start standard with phase changer for easy manual reversal of direction of rotation compressed air compression via high-performance unit HOS Start-up relief valve ensures easy, pressure-free start The two-cylinder high-performance engine made ...

Used hard PVC granulation plant after reconditioning Capacity approx. 200 - 300 kg/h, consisting of: 1.Extruder Krauss Maffei KMD 2-60KK (twin-screw, oblique screws), Year Built 1996 Main engine 37kw Heaters controlled by thermoregulators Heaters of German production Degassing – pump Screw diameter: 60-125 mm Screw speed 37.5 rpm Oil-thermostated augers externally Heating power of snails 6kw Screw cooling power 7kw Oil-cooled cylinder 4 zones on the cylinder (including 3 heating and cooling zones) Gefran/ Gneuse mass pressure sensor – Gefran/Gneuse ground temperature sensor Cylinder cooling power 14kw Capacity up to 300 kg/h 2. rotary filter (sieve changer) Manufacturer: Gneuss Type SF-90 – capacity up to 350 kg/h 3.Cutting in hot air system 4. granulate cooler with conveyor fan

- Year of manufacture 1985 - manufacturer Bielloni Castello Italy - Screw diameter: 50 mm - L/D ratio: 22 - Rotation speed: 20-100 r/min - Planetary gear (silent) - number of heating zones on the cylinder: 3 including two cooled - cylinder cooling: fan cooling, - water backfill cooling - Main motor power: 49.9 kW, DC - Temperature controllers: K 49 Italian production - regulation "fuzzy control" - Extruder length 2300 mm - Extrusion axis height 500mm - Capacity: 40 - 50 kg/h - Ability to measure mass pressure

- year of manufacture 1985 - manufacturer Bielloni Castello Italy - Screw diameter: 60 mm - L/D ratio: 24 - Rotation speed: 20-100 r/min - Planetary gear (silent) - number of heating zones on the cylinder: 3 including two cooled - cylinder cooling: fan cooling, - water backfill cooling - Main motor power: 49.9 kW, DC - Temperature controllers: K 49 Italian production - regulation "fuzzy control" - Extruder length 2400 mm - Extrusion axis height 500mm - Productivity:60- 90 kg/h - Ability to measure mass pressure

HORIZONTAL PLATE FREEZER CABINET, TUCAL MODEL: A.H. + COOLING COMPRESSOR IN NOISELESS CABINET, MODEL: UC Technical description: Serial number: 609 Power supply: 400 V, 3 Ph, 50 Hz Pressure: 7/10 bar Temperature: -35 / +35 ?C Refrigerant: NH3 Dimensions: 3000 x 1300 x 2300 mm Cooling compressor in noiseless cabinet, model: UC Serial number: 304 Year: 10/2015 Bitzer cooling compressor, type: OSNA8571-k Serial number: 1088702179 Dimensions of noiseless cabinet: 3000 x 1500 x 2320 mm

Execution: Aggregate type: stationary Execution: Super soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: BF 4 M 1013 EC Engine No.: on request Power: 93 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Sychron with AVR Gene. No.: on request Generator power: 100 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 270 Dimensions of the power unit: Width approx. mm: 1.080 Height approx. ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 731 GE Engine No.: 5312990071 Power: 153 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 J Gene. No.: 39796800001 Generator power: 150 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length ap ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: 5312982207 Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL044-M Gene. No.: 39664900008 Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length app ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC13-71A(02-01) - Stage 3A Engine No.: 7395788 Power: 315 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: ECO 38.2 L 4 C Gene. No.: P242434 Generator power: 350 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 740 Dimensions of the power unit: Width approx. mm: 1.800 Height approx. mm: 2.340 ...

Inv. Num. : 6730 Type: 325 S Producer: STAMA Created: 1995 GO 2023 Parameters: Control system: SIEMENS 840D Tool magazine: 36 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 500 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Cone: SK40 Maximum tool diameter: 100 mm Max. tool length: 220 mm Equipment: Conveyor Central cooling GO 2023: - new drive motors - New SINUMERIC 840D electrical system and system - Spindle after a complete GO with cooling in the middle of the spindle - new hydraulics - new cooling for machining also through the spindle - New air distributions and preparation for pneumatic clamping of workpieces on both tables - Complete GO for tool magazine

- closed CO2 laser for high-performance precision laser coding on a wide variety of surfaces - including water cooling - 1 x 2 print field (2.54 x 5.08 cm) - vector-controlled laser for highest print quality - high-resolution incremental encoder for variable tape speed, Shooting performance: 60 Watt Multiline, Operation / Control: programmable, control panel, Features: coolor, laser housing, Rittal radiator connection hose, shaft and cable, display, Galvo Power Supply, connection adapter for smoke evacuation, Marker Engine card P / N, Marker Engine Power Supply, sensor for compressed air monitoring, air filter, Switch box, monitor and keyboard, cooling plate, 2 x CPU, 2 x electronics power supply, galvo power supply, 3 x laser power supply, galvos mirror to deflect the laser, galvos cable, galvos connector for cooling

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

Control cabinet, standard control cabinet, with cooling unit RITTAL PS 4885 ( PS4885 ) width: 1600 mm, height: 1900 mm, depth: 500 mm 2 doors, 2 side walls cooling unit: PFANNENBERG DTS 7441 rated power: 0.88 kW effective cooling capacity: 1.8 kW 400 / 440 V AC 2.6 A used, tested ! Dimensions: 1800 x 880 x 2000 mm

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

Refrigeration unit, heat exchanger, cooler, chiller PHÖNIX HOCHVACUUMTECHNIK RUDOLSTADT CCS 1000RE Cooling capacity at circulation temperature 32 °C: 1 kW / 10°C Machine cooling capacity: 900 m3 Air Ambient temperature range: -25°C - 50°C Cooling air volume flow: 9,350 m3/h Tank capacity: 8.0 l Flow rate: approx. 3.0 l/min connected load: 1.3 kVA operating voltage: 230 V 1AC 50 Hz control voltage: 230 V AC rollable, 2 swivel castors with parking brake, 2 fixed castors used, tested ! Dimensions: 1150 x 425 x 830 mm

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Baudoin Engine: 12 M 33 G 1400 / 5 Engine No.: in production Power: 1,100 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: PI 734 B Gene. No.: in production Generator power: 2,000 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 1000 Dimensions of the power unit: Width approx. mm: 2.460 Height appro ...

Execution: Aggregate type: stationary Execution: Contianer 20 Ft. Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: in production Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: VALLEY 044 M M 6S/4 Gene. No.: in production Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 360 Dimensions of the power unit: Width approx. mm: 2.460 ...

Cooling unit Bitzer Type: 4HE-18Y-40P Volume: 74 m3/h Cooling capacity for R404A: 52 kW at -5°C/40°C, 35 kW at -15°C/40°C, 22 kW at -25°C/40°C Dimensions: 1750x1250x1050 mm Number of fans: 2x500 mm Quantity in stock: 1 Condition: Used In set with: Cool Thermofin Type: X-TEN 050.2-F-2-12-E Cooling capacity: 19,2 kW at DT8, 14,5 kW at DT7 Surface: 97 m2 Air flow: 12495 m3/h Fin spinning: 12 mm Electric heaters Fans: 2X500 mm Dimensions: 2400X1050X800 mm Refrigerant: Freon Volume: 42.8 l Weight: 227 kg Quantity in stock: 1 Condition: Used in good condition

Adiabatic dry coolers Cooling Capacity: 275kW Cooling water temperature on/off: 30/25C Outside air temperature: 30 6 EC fans, 6x2.9kW (speed control) We are happy to calculate the cooling capacity at other temperatures

Bread system for free-pushed bread Hourly output approx. 3000 kg Length of the plant approx. 120 meters Year of construction 2006-2017 Composed of: - Reimelt weighing - Diosna Wendelkkneader Liniearseystem WV 400 A KN2 - With cage and 4 tank cars built in 2011 - Diosna Lifting Tipper - Diosna pre-portioning - Benier Dough Masts (2 pieces) - Benier long scooter - Kemper circular knitter - Kaak proofing cabinet with cutting station and transfer to oven - W.P. Mesh belt furnace 60 meters - Bread removal and removal - Cooling belts for cooling - Kaak double spiral cooling (new belts) - Fuji packaging from 2017

Bitzer refrigerant compressors unit Type: HSK8561-125-40P (x3) Volume: 359 m3/h (x3) Cooling capacity for R134a: 477 kW at - 5°C/40°C, 375 kW at -10°C/40°C Cooling capacity for R407C: 696 kW at -5°C/40°C, 550 kW at -10°C/40°C Dimensions: 4000 x 1800 x 2200 mm Condenser Thermofin Type: TCD.2-091-26-D-M-DE-BC-04 Cooling capacity: 1140/978 KW Air flow: 290 910/229 060 m3/h Number of fans: 12 x 910 mm Dimensions: 8000 x 240 x 2750 mm Year of production: 2019 Volume: 355 L Weight: 4 000 kg Control panel Dimensions: 2400 x 600 x 2000 mm

Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: KKT Kraus, industrial cooler type OLB 4 -Power consumption: 3 kW -Operating pressure: max. 19 bar -Output: 12 L/min -Dimensions: 900/600/H1070 mm -Weight: 142 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, separating hood compressor, separating hood compressor -Manufacturer: Frigopol, separating hood compressor -Type: D 60300 -Power: 2.2 kW / 1440 rpm -Voltage: 380/660 V -Number: 4x cooling unit available -Price per piece -Dimensions: 400/400 / H455 mm -Weight: 68 kg/pcs.

Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun -mobile version: -Connection: 1/2 inch -Cooling unit output: 0.33 kW -Water volume flow: 500 l / h -Dimensions: 895/600 / H1020 mm -Weight: 156 kg

Cooling tumbler, vacuum tumbler, tumbler, vacuum mixer, vacuum mixing machine -Capacity: 1300 liters -Max. Vacuum: 950 mbar -Equipment: ejection flap, cooling housing, cooling -Dimensions: 2370/1500/H2320 mm -Weight: about 1500 kg

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

positioning 0.001 degree Spindle: 80-8000 rpm, BT 40 IKZ (cooling through the spindle) Automatic tool change: 20 tools Equipment: Cooling System, High pressure pump with spatula cooling Documentation The machine has a 4th axis Kitagawa.

The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-360 AU Year of production 1995 Automatic operation type Tape cutting tool 5334x38x1.3 mm Max. dimensions of the cut material 360 x 360 mm Max. diameter of cut material 360 mm Angle cutting missing Arm feed speed 20 - 130 m/min Hydraulic vice pressing Engine power 7.5 kW Producer: KASTO Max. ...