130,792 used machines on RESALE, but how to find them? Machine Search
General SKULY003 MakeAlfa Laval TypeAlfaFlash MVR system Main Features MaterialStainless steel Motor110 KW Surface1.1 m2 Specified Features - Film evaporator Max. temperature110 °C With variable speed drivecheck With condensercheck MaterialStainless steel 1.4401 (316), Titanium Information No.DE21-1026 Year of construction2021 With switchgearcheck Extra SpecificationsThis machine (Elemetal Zinc Sulphate MVR System) is an evaporation/crystallization unit that concentrates zinc sulphate solution past saturation so zinc precipitates as ZnSO₄·1H₂O crystals. The crystals are then separated from the mother liquor in a decanter centrifuge, producing a solids cake for downstream drying and clean condensate that can be reused. : The complete plant/module consists of (main machines/equipment): Feed section: feed pump and feed preheater: Feed to the module: 1065 kg/h, 50° ...
This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...
Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...
Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...
This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details.
Nitrogen cooling bath, Cryotherm, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was removed from a machine that had been in operation for a maximum of 2 years. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...
2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160
RITTAL SK 3365.662 Wall-Mounted Cooling Unit – Blue e Series High-performance wall-mounted enclosure cooling unit designed to provide reliable temperature control for electrical cabinets and control panels in industrial environments. The RITTAL SK 3365.662 from the Blue e Series offers efficient cooling performance and energy-optimized operation for temperature-sensitive electronics. General Information - Manufacturer: RITTAL - Model: SK 3365.662 - Series: Blue e - Machine Type: Wall-mounted cooling unit Technical Specifications - Cooling Capacity: 1,500 W - Voltage Supply: 230 V AC / 50–60 Hz - Protection Class: IP54 (internal and external circuits) - Refrigerant: R134a Dimensions and Weight - Dimensions (W × H × D): 435 × 1,090 × 260 mm - Weight: approx. 45 kg - Condensate Management - System: Electrical condensate evaporation Key Features - Energy-e ...
MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...
MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...
Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.
Didar Part Number 2601582001 NSN 12-SG3-0291 Original Part Number X00018011/87 In-Pipe Water Pressure 3 – 8 bar Out of Pipe Air Pressure 3 – 5 bar In-Pipe Water Temperatur 75 °C Outside Pipe Air Temperature 235 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 22 Lt.
Didar Part Number 2605710003 NSN 12-A08-6397 Original Part Number 0030983220 In-Pipe Water Pressure 3.5 – 8.5 bar Out of Pipe Air Pressure 3.5 – 4 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 215 °C Amount of Water in the Pipe 24 Lt. Amount of Air Outside the Pipe 45 Lt.
Didar Part Number2600208001 NSN 2930-12-A01-6407 Original Part Number 0030983920 In-Pipe Water Pressure 6.0 – 9 bar Out of Pipe Air Pressure 3.3 – 5 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 225 °C Amount of Water in the Pipe 4 Lt. Amount of Air Outside the Pipe 14 Lt.
Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.
Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.
Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.
Has been used for cooling hot pouches of sauce in a large sauce factory. Could possibly be used as a large blancher.
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 16 cooling units are available. All 16 cooling units fit into a 40Hc container for transport.
Manufacturer: Bär Type of Machine : Coolant Cleaning System Year of Manufacture: 2015 Voltage Supply: 3L/ N/ PE 400 VAC / 50 Hz Control Voltage: 24 V DC Connection Rating: 185 kW / 350 A Max. Fuse Protection: 400 A Minimum Cable Cross-Section: 240 mm² Find more here - / Contact us at -
General SKU204U051 LocationBarneveld MakeSollich TypeKK 420 Spezial No.0628 Year of construction09/1998 Main Features MaterialStainless steel Length6000 mm Width600 mm Specified Features - Belt cooler Cooling beltcheck Belt can be cooledcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck Total height1.14 m Weight2000 kg CEcheck Floorspace5,32x0,99 m Extra SpecificationsWithout belt, without control, incomplete this beltcooler was part of a SKU 204U1442 ( sollich FKW-s 15 chiller) Belt coolersSollichBelt coolers > Belt coolersBrand > Sollich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU204U035 LocationBarneveld MakeSollich TypeKK 420 No.0618 Year of construction07/1997 Main Features MaterialStainless steel Length6000 mm Width600 mm Specified Features - Belt cooler Cooling beltcheck Belt width600 mm Belt length6000 mm With motorcheck Belt can be cooledcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck With switchcheck Weight2000 kg CEcheck Floorspace6,0 x 1,60 m Total height1,2 m Extra SpecificationsWithout belt, without control, incomplete Belt coolersSollichBelt coolers > Belt coolersBrand > Sollich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Spiral cooler dim.260 x 260 x320 cm , 2 spiral belt , width of the belt 60 cm
WATER COOLING TANK, for strand pelletizers, Constructed in AISI4304 stainless steel, On 4 wheels (2 with brakes), Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt., tank : LxWxH 2,5 x 0,5 x 0,25 mt.
General SKU256N198 LocationBarneveld CEcheck MakeGMF GOUDA TypeDisc Pastillator DP20/2 Main Features MaterialStainless steel/Coated Specified Features - Belt cooler Cooling beltø 2000 mm rotating discs (2x) With motor1,5 kW Belt can be cooledcheck Feeding drop dosing devicecheck With scrapercheck Outletø 150 mm MaterialStainless steel Information No.DP 47-2-1 Year of construction1997 With switchcheck Floorspace6,6 x 3,3 m Total height3,3 m Weight6000 kgBelt coolersGMF GoudaBelt coolers > Belt coolersBrand > GMF Gouda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Manufacturer Transtherm Cooling Industries Model TD90W/VEE-212/D Dry Air Cooler Year 2023 Condition Used Stock Number SBS20220469
Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock
Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock
Product number:M15-4194 Cooling capacity:41,6 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:10 kg Voltage:400 Volt Power consumption:16,5 kW Dimensions:2085 x 1230 x 2300 mm Weight:1013 kg Year:2012 Number in stock:2 piece(s) Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. These chillers are equipped with an expansion tank and a water pump. Please visit also our website: used-refrigeration
Charge air cooler for Wichmann 12V28 Part no: 530302 Vestas type CB32 Can be sold "as is" or overhauled, ready to fit.
HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph
High-intensity cold light lighting system for macroscopic applications, lamps, luminaires, lighting -Handover: in its current condition as inspected -Condition: Sold as a parts donor without light bulbs (without light bulbs) -Case dimensions: 520/220H440 mm -Weight: 16.4 kg
Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg
Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.
Air chiller for rooms or machines Power supply 380V, 50Hz Refrigerant R410A Input power approx. 5 kW Cooling capacity approx. 13 kW Cooling air volume 2,000 m3/h
Tumbler Iglu Scheid with cooling Volume: 250 liters Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW
Compound plant Bitzer with 6 pcs. compressor Bitzer S6F-30.2Y, in a container as a machine room, with control box fixed wired and condenser with 6 fans on the container.
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 16 cooling units are available. All 16 cooling units fit into a 40Hc container for transport.
Metos Proveno CoolPro 80E combi kettle Stainless, 80L, combi kettle, jacketed, 20.75Kw, temp range from 0'C to 120'C, with variable speed agitation, adjustable timer and temperature settings and more, with manual, 3Ph
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW
COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12
Cool condensing unit Model: M5P CSGLE ZF 40-SB-P Compressor type: ZF40K4E-TWD-551 Cooling capacity for R404A: 22.1 kW at -10°C/40°C, 11.9 kW at -25°C/40°C, 9.5 kW at -30°C/40°C External dimensions: 1460 x 850 x 1410 mm Number of fans: 2 x 500 mm Stock: 1 piece Stock number: AG 177 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.
2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -
Refrigerated table COOL COMPACT Type: KTM824660 Dimensions (W/D/H) cm: 140 x 80 x 85 cm Technical services: Temperature range: Temperature range -2° to +10°C Version with convection cooling 2 refrigerator compartments with a total of 5 drawers for 60x40 trays digital control Work surface with cutting board 140 x 30 x 2 cm Specifications: Connected load: 230 V / 50 Hz / 440 W Capacity: 370 / 333 liters Year of Make: 2010 Function checked, machine ready to plug, ready for immediate use! Condition & accessories see original pictures! If you have any questions, email or call.
maximum number of results exceeded
please refine your search
