cooking kettles and used for sale

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

Handtmann hanging line consits of Handtmann VF 100 and PLH 216, vacuum filling machine Handtmann VF 100, vacuum stuffer for filling, portioning, linking, case holding device, PCK control, with loading device, filling performance (variable adjustable) max. 3000 kg/h, filling pressure max. 55 bar, with Handtmann PLH 216 hanging machin.

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

CHP 60kW of electric power with approx. 108kW of thermal performance Compact system with enclosure and Cabinet mounted on the system. incl. power factor correction and emergency cooler.

Kramer + Grebe SM 45 STL, 45 liters bowl cutter, all stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, 2 knife speeds, mixing speed forwards, 2 bowl speeds, standard knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Bread slicer - Make: RÖSEN & ROBBEST - Model: SPA 38 (38 bread liner) - Condition: Used, fully restored - Warranty: 6 months

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Large item of paints and varnishes in large containers of 25 litres and 30 litres. Multiple times present. Also to be handed over individually, inexpensive! Clou Acocryl Rapid 30 litres - multiple times available (approx. 7 pcs) Cloupur Dilution aromatic-free 30 litres Clou Acocryl - Hardener 30 litres Clou delayer for nito and DD coatings 5 litres 2x present Hesse Lignal UNA-Color Topcoat DB555-9005 2 K-Pur acrylate resin lacquer 25 liters 4 pieces available - RAl 9005 (Black), list price per litre approx. 12 EUR Hesse Unapur topcoat DE 554 2 K-Pur acrylate resin lacquer 25 litres 2x present Hesse Rustic Pickle NCL 5-53552 25 litres Lignal Universal DelayDV 499 Special dilution to extend processing time 25 litres All containers unopened. Complete acceptance or individual acceptance, please against bid. All data in approx. units of measure. Special price

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Kilia Meister Plus 50 bowl cutter, 50 liters bowl of stainless steel, almost completely made of solid stainless steel, Siemens control, noise absorbing cover of transparent special plastic, central point of lubrication for knife shaft, balanceable and exchangeable knife head, variable knife speed, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Handtmann FA 30 Top piston filling machine, piston filler for filling, portioning and linking. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

Vacuum stuffer Handtmann VF 100, vacuum filling machine for filling, portioning, linking, loading device, mc control, body all stainless steel, filling performance 3000 kg/h, pressure up to 55 bar, 420 port./min. You are very welcome to test the machine in Koblenz, Germany.

; very good condition, like new

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

; mint condition, ready

; operational as of week 33

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

; very good condition, ready for operation

Hydraulic punching and cut-out machine Indumasch punching force max.: 40 t Blechstaerke max.: 10 mm Stroke number: 150 p / min Punch ing diameter max.: 105 mm working area in transverse direction = x: 1000 mm working area in the direction of loading = y: 750 mm Position accuracy: 0.1 mm Total weight with table approx.: 3500 kg incl. Zubehoer under the river to visit; ready for immediate use

; available as of week 20/2014

Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33

SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014

Plasma cutting machine ESAB working area 1500 x 3000 1 x autogen up to 200 mm 1 x Plasma Hifocus 160 i with automatic gas console. see PDF document several plasma change torches available Very well maintained from: 10 / 2012; ready for use

; ready for immediate use

; ready for immediate use

; ready for immediate use

; ready for immediate use

; ready for immediate use

; ready for immediate use

Working range: 2500mm x 6000mm rail length: 8000 mm track width: 3000 mm racks and drive pinion renewed at the end of 2011. Last recovery at the end of 2011. Control Sato CNC 3000 2 x Autogen 1 x Plasma Kjellberg 160 i with automatic gas console (see Pdf) 1 x Support for koerning Complete with table and suction assembly and commissioning on request ; ready for immediate use

Working range : 2500mm x 6000mm 1 x Autogen 1 x Plasma 1 x Drilling unit HP Digital Process Control Plasma Source: Nertajet HP 125 Machine burner OCP 150 Without table and suction Option: suction table and filter unit assembly and commissioning on request; ready to use

Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft

Type Cutters Warranty 12 months Height 2350 Width 2200 mm Length 1910 mm Weight 4000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 57.25 kw Main material Stainlees Steel Time of realisation in stock Cutter Type Bowl Cutter Cutter made of Stainless steel Bowl made of Stainless steel Bowl capacity 200 l Efficiency 100-140 kg/cycle Knives amount 6 pc. Knife shaft revolutions 900/1800/3600 rpm Bowl revolutions 7.5/10/15 rpm

Heavy Duty Lathe POREBA Model: TCA 160 /12000 Condition: Excellent, ready to work Year of manufacture: 1963 Complete Offer includes a lot of equipment Technical details : Control: Manual High of centrem over the flat way: 800 mm High of centres over the floor: 1 600 mm Swing over carriage: 1 280 mm Diametre of 4-jaws chuck: 1 600 mm Distance between centres: 12 000 mm Load carrying capacity without steady: 30 000 kg Load carrying capacity with 1 steady: 35 000 kg Load carrying capacity with 2 steady: 40 000 kg Equipment: - head for grinding 2 psc. - constant's lunette 3 psc. - mobile lunette: 1 psc. - milling head 1 psc. - carriages 2 psc. - change gear set, etc

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Messer Cortina Plasma and cutting machine 1 x PlasmaSupport Hypertherm HD 3070 1 x Automotive support Working area: 2500mm x 4000mm under current commissioning on request; ready to use

MEMBRANE PRESS type FISMA 2200 x 1300 . usata useful size mm. 2200 x 1300 cover opening and closer by pneumatic pistons volt. 380/50 with separate vacuum system

Duker Rex RK 45, 45 liters bowl cutter with brand new noise reduction cover, 2 knife speeds, mixing 2 speeds, 2 separate bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann VF 620 vacuum filling machine with linking gear box, filling, portioning, linking, monitor control, with loading device for 200 liter standard trollies. You are very welcome to test the machine in our facility in Koblenz, Germany.

MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter SM 90 STL bowl cutter, 90 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife speed up to 5,000 rpm., 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse (40-500 UpM), temperature switch off function, knife head with 6 knives, power 32 kW. You are very welcome to test the machine in our facility in Koblenz, Germany.