127,441 used machines on RESALE, but how to find them? Machine Search
We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts
max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3 Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing th ...
turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version Chip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
max. wheel diameter:300 mm max. number of teeth:999 max. module:5 total power requirement:10 kW weight of the machine ca.:1.800 Kos. dimensions of the machine ca.:1300 x 1450 x 2250 mm The Gear Tooth Deburring machine ? ZEM 300 for deburring of splines gear wheels and shafts The advantages at a glance - Vertical workpiece spindle - Chamferring, debburing and smoothing - Simultaneous Processing of 2 Gears - Dry Processing - Repeat accuracy when adjusting the tools - Simple integrated Pick up swing arm or linear loader - Crane hook machine Workspace Swing Diameter: 300 mm Process Diameter: 300 mm Workpiece Length: 450 mm Main Spindle Spindle Flange: Zylindrisch D=120 mm Front bearing spindle: 100 mm RPM max: 1500 U/min AC-Synchronmotor: 50 Nm Clamping cylinder : pneumatic Clamping force (5 bar): 10 kN Working axis swing arm for chamferring tool Feed force: 3 kN Ball screw drive: 25x5 P ...
turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours
spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling
spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm Speed of boring spindles:1,25 - 1250 U/min. ram stroke:700 mm dimension of the ram:340 x 340 mm mm spindle taper ISO:50 rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m CNC control Siemens 840 Dsl completely modernized 2010 FIBRO CNC drilling work table 2500 x 2500 mm 50 to. workpiece weight Longitudinal travel 2500 mm Angular milling head 4 x 90° Universal angular milling head Panel area approx. 10000 x 5000 mm Chip conveyor and coolant device Aerostatic guides
bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel
turning diameter:220 mm turning length:- mm control:- distance between milling spindels:800 mm spindle speed max.:12.000 U/min daylight:66 mm machine weight ab.:11 t total power requirement:90 kVA Fanuc control Two turrets Two spindles Spindle bore 66 mm on both spindles Two Y-axes Parts gripper Hainbuch chuck on both spindles Tailstock function Chip conveyor Tool eye Short bar loader Tool holder package
spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg
x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 Lifting operator platform External tool cooling Spindle clamping support
turning diameter:760 mm turning length:1.524 mm spindle speeds::3.300/12.000 MILL/3.300 spindle diameter:78/78 mm no. of tools in magazin:80 tool taper:Capto max. tool length:400 mm max. tool diameter:125/90 mm weight of the machine ca.:13,4 t Machine with Mazak Matrix CNC control Main and counter spindles Milling unit (milling spindle) Kitagawa QJ-312 dual-action chuck Pallet pool with robot IKZ Exhaust system not included
spindle diameter:150 mm x-travel:3.000 mm y-travel:2.000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 mm column travel:1.500 mm high speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/min table surface area:2.000 x 2.500 mm max. table load:25.000 kg rapid traverse speed:5/10 m/min feed speeds:1 - 1.500 mm/min faceplate speeds from - to:3,2 - 140 U/min dimensions of the machine ca.:8,4 x 6,8 x 5,9 m weight of the machine ca.:57 t total power requirement:100 kW Full B-axis Aerostatic guides Coolant system with IKZ
bore capacity in steel (diameter):5 - 30 mm x-travel:450 mm y-travel:380 mm total power requirement:1,4 / 2,2 kW weight of the machine ca.:1.100 kg dimensions of the machine ca.:1.000 x 1.400 x 2.900 mm gear box:85 - 2.000 U/min spindle diameter:72 mm bore depth:700 mm throat:300 mm spindle taper MT:3 T-slots:3 x 16/25 mm table-size:700 x 300 mm spindle turning speed range:85/170/250/355/475/710/1000/2000 U/min motor speeds::705/1425 Year:ca. 1975
x-travel:1190 mm total power requirement:25 kW feeds::3 - 2000 mm/min weight of the machine ca.:4,3 t table-size:1600 x 400, 5 Spannbacken mm dimensions of the machine ca.:4000 x 3600 x 2200 mm speeds:45 - 1800 U/min y-travel:530 mm z-travel:540 mm tool taper:ISO 50 control cabinet:940 kg
x-travel:850 mm y-travel:280 mm z-travel:355 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:2 x 2 x2.40 m revolutions per minute: 28-1.400 U/min table-size:1.200 x 370 mm surface area:1.060 x 260 mm spindle taper:SK 50
spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped.
throat:580 mm tool adaptor:drm. 130 weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.
spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm ram stroke:700 dimension of the ram:340 x 340 mm spindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min. feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways
turning diameter:275 mm turning length:900 mm spindle passage:65 mm power capacity at 100 % load:25/20 kW spindle turning speed range:1 - 5000 U/min spindle diameter in front bearing:110 mm c-axis:1 - 500 U/min. number of workpiece supports:4 tool turret:1 x-axis:290 mm y-axis:165 mm z-axis:360 mm b-axis:360 ° rapid speed:18/30 m/min number of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mm toolpiece turning speed range:8000 / 2000 U/min power capacity:25% ED 5,8 kW tool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mm z-axis:600/950 mm y-axis:+/- 60 mm rapid speed:18/15/30 m/min number of driven tools:10 mm toolpiece turning speed range:1 - 6000 U/min power capacity:25% ED 5,8 kW tool taper:DIN 69880 40 x 63 total power requirement:95 kW weight of the machine ca.:16 t dimensions of the machine ca.:10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and ...
spindle diameter:150 mm x-travel:3000 mm y-travel:2000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 column travel:1500 mm spindle taper ISO:50 bore spindle turning speed range:3,2 - 1600 U/min table surface area:2000 x 2500 mm max. table load:25000 kg rapid speed:5 / 10 m/min feed speeds:1 - 5000 mm/min total power requirement:100 kW weight of the machine ca.:57 t dimensions of the machine ca.:8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply
spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-axis:1520 mm w-axis:1000 mm table surface area:2000 x 1800 mm workpiece weight:8 t spindle motor:18 kW spindle taper ISO:50 spindle turning speed range:4,5 - 900 U/min faceplate diameter:785 mm rapid traverse:5 m/min total power requirement:40 kW dimensions of the machine ca.:5,5 x 6,9 x 5,2 m weight of the machine ca.:35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster
spindle diameter:120 mm x-travel:1250 mm y-travel:1250 mm z-travel:800 mm W-axis (spindle longitudinal):600 mm Speed of boring spindles:1- 2000 U/min. spindle taper ISO:50 table surface area:1000 x 1000 mm total power requirement:55 kW weight of the machine ca.:18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment
spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment
turning diameter:445 mm turning length:2000 mm turning diameter over bed slide:660 spindle bore:65 mm spindle speeds::16 - 3150 U/min. rapid motion - x-axis:10 mm/min rapid traverse Z-axis:15 m/min total power requirement:34 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment
4x 1028991 SKF 8x 1204K/C3 SKF 6x 2205K SKF 24x 2300 SKF 6x 3311N SKF 2x ASNA612V SKF 4x CR70X95X10HMS4V SKF 1x FYKC35NTR/VE495 SKF 1x KRVE72PPA SKF 1x N313MB SKF 1x NU220ECMA/C3 SKF 2x OS43860 SKF 27x ZW12X17 SKF 5x 21311-E1-K-TVPB-C3 FAG 16x 546114A FAG 4x 803138.H83 FAG 1x DH506 FAG 1x NJ226E. M1. F1795124 FAG 8x RNAO50X62X20ASR1 FAG 2x 121 INA 11x F-23615 INA 28x F-45948 INA 1x GG. CJ03 INA 29x IR45X52X23-IS1 INA 1x RNA6903-H-XL INA 1x RNA6903 INA 2x N310 NTN 2x NU406C3 NTN 1x PF208 NTN 5x RNA-NA6908R NTN 5x T211D1 NTN 5x 7218H G1 U J74 SNR 1x 1318 NSK 2x L44649R/610RNES4C NSK 2x 21308K C3 RHP 1x 7019X3 TA UM EP7 RHP 36x ACS0506-2FY Koyo 1x RNA4822 Koyo 49x SBPFL201 Koyo 1x 22208KCJW33 Torrington 2x NJ2204ET Torrington 1x NK70/35ASR1 Torrington 5x NUTR45 Torrington 8x 306806C.2Z NKE 4x NKIS20 NKE and more
with nuts. and screw feed The workpieces, max. 100 kg or 25dm³, are stored in the automatic filing machine and sorted in the correct position. At the end of the sorting process, the workpieces are buffered on a linear conveyor rail and sent for separation. Behind the separation is mounted a corresponding transport hose and a blowing air nozzle. Only one workpiece is transported through the transport hose at a time. The electrical interface can be HAN plugs, BUS modules and valve terminals. Workpieces : Press-fit bolt M6 x 15 Max. feeding capacity: 15 screws/minute (1-lane) Maximum filling weight: 100 kg Maximum filling volume: 25 dm³ Voltage: 230 V Max. power consumption: 100 VA
Manufacturer: Mitutoyo Type / Model: Digital measurement setup with Digimatic dial gauge ID-C150B Manufacturer's specifications dial gauge • Model: ID-C150B • Code no.: 543-460B • Measuring range: 0 – 50.8 mm • Resolution: 0.001 mm • Measuring system: Absolute (ABS / INC) • Display: Digital • Data output: Digimatic • Power supply: Battery (button cell, inserted) • Country of manufacture: Japan Measuring setup / scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Precision measuring stand with cross arm • Mitutoyo Digimatic mini processor / printer DP-1VR • Granite measuring plate (integral part of the device) • Foot switch • Connection cable • Mitutoyo mini processor / printer DP-1VR (incl. connection cable) Technical data granite plate • Material: granite • Size: approx. 400 × 400 × 60 mm (L × W × H) • Solid design • Flatness clas ...
Lathes with: - Digital display - Rapid traverse - Röhm 3-jaw chuck 315mm - 4-fold steel holder - 2 pcs bezels - Coolant system - Emergency stop facility - Machine light - Feed protection - 2 pcs chip trays - Replacement jaws (inside and outside) Turning diameter over bed 820 mm Turning diameter over support 575 mm Turning length 3300 mm Center height 410 mm Circumferential diameter in offset mm Spindle bore 125 mm Spindle speeds 7.1 - 1400 rpm Total power requirement 22.0 kW Machine weight approx. 6.0 t Dimensions approx. 6.3 x 1.6 x 2.0 mm
Equipment: Drill chuck with ISO-30 mount Digital depth display Left/right switch. Emergency stop Swivelling drill head Spindle protection. Feed via handwheel. Small tool case Machine base optional. Drilling capacity in steel 45mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 30 Spindle speeds 75 - 1600 rpm max. cutter diameter 80 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm max. distance between work table and spindle nose 460 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 320 kg Space requirements approx. 1.0 x 0.8 x 1.45 m
Peddinghaus Peddimax 602 profile processing machine, suitable for punching, cutting and processing various steel profiles and sheet material. This robust and industrially designed machine from the renowned brand Peddinghaus is designed for intensive use in metal workshops, construction workshops and production environments where power, precision and versatility are of great importance. The machine is equipped with multiple processing stations, allowing various operations to be carried out efficiently on one compact setup. Based on the visible configuration, this installation is equipped for the processing of corners, strips, profiles and holes, which makes it particularly interesting for general steel construction and workshop work. The machine is offered with roller conveyor/infeed table, foot pedal and a range of visible outriggers and accessories, further increasing practicality. Ac ...
Equipment: 3-axis digital display Digital depth display Motorized feed for X and Y Left/Right Run Emergency stop Swivelling drill head Spindle protection. Machine Light Tool case with contents Drilling capacity in steel 35 mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 40 Spindle speeds 115 - 1750 rpm Table adjustment transverse 375 mm Table adjustment longitudinal 175 mm Table clamping area 1000 x 240 mm Max. distance between work table and spindle nose 120 - 375 mm Connection voltage 400 V Total power requirement 0.85 / 1.5 kW Machine weight approx. 0.95 t Space requirement approx. 1.3 x 1.2 x 2.1 m Condition: never used / new (5)
Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version.
11x VKBA1361 SKF 1x VKBA1436 SKF 1x VKBA1436 SKF 9x VKBA1485 SKF 1x VKBA3907 SKF 1x VKBA3907 SKF 8x VKBA625 SKF 5x VKC2083 SKF 140x VKC3620 SKF 1x VKMA04200 SKF 1x VKPC83428 SKF 1x VKPC83615 SKF 3x VKPC84208 SKF 2x VKPC84618 SKF 2x VKPC85611 SKF 3x VKS6150 SKF 2x F-112215 INA 4x F-203222.5 INA 9x F-83001.2 INA 1x 38KWD02G3CA126 NSK 10x CBU472921C Koyo and more
10x 362162C SKF 1x 4303ATN9 SKF 1x 4303ATN9 SKF 1x 4303ATN9 SKF 5x 441500A SKF 19x 6003 SKF 5x 6003 SKF 14x 6003/C3 SKF 7x 6004-2Z/C3 SKF 13x 6006-RS1/C4 SKF 1x 6007-2Z/C3 SKF 5x 6008-2Z/C3 SKF 1x 6016 SKF 8x 607-RS1 SKF 7x 609-RZTN9/C4HMT33 SKF 4x 61803-2Z SKF 2x 61808 SKF 5x 61808 SKF 2x 6203-2RS1/QE6 SKF 3x 6209-Z SKF 1x 6308-2Z SKF 1x 6308-2Z/C4WT SKF 1x 6309-2RS1 SKF 1x 6310NR/C3 SKF 70x EE9J SKF 2x 6009.2ZR. C3 FAG 2x 607RSR FAG 1x 6210ZRN FAG 200x 6305.P63 FAG 4x 61808-HLU INA 1x MR128.2Z INA 2x 6019LUC4 NTN 1x 6904 NSK 3x 6909ZZCM NSK 1x 6203TB EP7 RHP 1x 6214-2RSRJ RHP 1x 6214-2RSRJ RHP 1x 6214-2RSRJ RHP 2x 6214-2RSRJ RHP and more
" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm "
1x BRUB445232AA SKF 4x BRUB445232AA SKF 4x VKBA1938 SKF 4x VKBA3406 SKF 69x VKC2025 SKF 148x VKC2025 SKF 41x VKC2080 SKF 3x VKHB2240 SKF 1x VKM38012 SKF 2x VKPC83420 SKF 1x VKPC84406 SKF 1x VKPC84406 SKF 2x VKPC84600 SKF 1x VKPC85620 SKF 20x F-110096.2 INA 1x F-112201 INA 5x F-45953 INA 10x F-93681 INA 2x BDF395NA01 SNR 10x 48TKA3301 UN3S NSK 5x 48TKB3202 UN3S NSK 1x 55TKA3102A UN3S NSK 1x 22/W2.1/2ND MS44 RHP 38x RCT3157GD2 Koyo and more
Marking plate / measuring plate with tripod and holder Used marking or measuring plate with attached tripod and adjustable holder, suitable for marking, testing and measuring work in tool and machine construction. • Design: marking plate / measuring plate • Surface: finely machined, grid structure • Dimensions plate: approx. 250 × 360 mm • Plate thickness: approx. 34 mm • Material: Steel / cast iron • With column stand and adjustable holder
" Industrial bench grinder / brushing machine with 3-jaw chuck and accessories Heavy, free-standing industrial grinding or brushing machine in solid cast iron design. Equipped with: • 3-jaw chuck • Side protective cover • Mechanical feed option • Electric foot switch (emergency stop version) • Multiple grinding/brushing rollers (see pictures) Machine was used for grinding/brushing. Condition: Used, heavily soiled, uncleaned. Sold as shown with existing accessories (rollers). Type: Stand-alone machine Drive: Electric motor (belt drive) Clamping adapter: 3-jaw chuck Operation: Foot switch Construction: Heavy machine body made of cast iron • Dimensions in mm (LxWxH) approx. 600 x 750 x 1100 mm "
" Mitutoyo Digital Dial Gauge ID-C150B with Measuring Stand and Granite Measuring Plate Digital dial gauge from Mitutoyo with associated measuring stand and granite measuring plate. The unit is set up as a complete measuring station and is delivered together. • Used • Dial gauge can be switched on, display available • No calibration or measurement test carried out • Mechanical parts movable • Optical traces of wear present Scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Measuring stand with bracket • Granite measuring plate Digital dial gauge • Manufacturer: Mitutoyo • Model: ID-C150B • Code no.: 543-460B • Measuring range: 50.8 mm • Resolution: 0.001 mm • Display: Digital • Functions: Zero/ABS, Preset, mm • Origin: Made in Japan Measuring stand • Mechanical measuring stand with round column • Height adjustment via clamping • Side boom fo ...
2x 1213ETN9 SKF 1x 2208EKTN9/C3 SKF 1x 37X47X4HM4R SKF 58x 51110J9 SKF 1x 7216BECBJ SKF 2x 7216BECBJ SKF 1x AHX2319 SKF 5x ECB208 SKF 1x FRB10/130 SKF 3x FRB10/215 SKF 1x HJ207 SKF 1x HK0808 SKF 2x LAPM2 SKF 4x N307ECP SKF 2x NATR5 SKF 1x NK110/40 SKF 5x NK22/20 SKF 1x NKXR30 SKF 1x NU2304 SKF 1x NU310ECP/C3 SKF 1x NU310ECP/C3 SKF 1x NU324ECJ SKF 1x NU328ECJ/C3 SKF 13x PCM141620E SKF 4x RC-4X4C SKF 2x U203 SKF 1x YAR212-204-2F SKF 1x 1211TV FAG 1x 1306K. TV. C3 FAG 4x 1306K. TV. C3 FAG 1x 21310EK. TVPB FAG 1x 21318EK. TVPB FAG 1x 22212E1K. C3 FAG 1x 22317-E1-XL-C3 FAG 2x 31313A FAG 11x F-45980 INA 6x STO35 INA 2x BAM2012 IKO 2x IRT4030 IKO 1x AHX2319 RHP 2x SFT1.1/4EC RHP 16x NU207E. TVP NKE and more
Lathes with: - Copying device - Forkardt 3-jaw chuck F250 - Multifix steel holder - Coolant system - Machine light - Feed protection - Chip tray - Chip protection wall - Foot brake Turning diameter over bed 410 mm Turning diameter over support 220 mm Turning length 1000 mm Center height 205 mm Circumferential diameter in offset mm Spindle bore 46 mm Spindle speeds 40 - 2000 rpm Total power requirement 22.0 kW Machine weight approx. 1.8 t Space requirement approx. 2.42 x 1.3 x 1.55 mm
1x 1308EKTN9/C3 SKF 1x 21317EW SKF 1x 52204 SKF 1x 53206 SKF 43x FRB8/62 SKF 1x FYKC35NTR/VE495 SKF 1x LBBR10 SKF 3x NA49/22 SKF 5x NA49/22 SKF 1x NATV15PP SKF 2x NK8/16TN SKF 2x NU1008MP SKF 12x PSM182430 SKF 15x RC-7X7C SKF 3x TMFT12A SKF 7x EGB1208-E40 INA 150x GRA110NPPB INA 2x KR72X INA 5x LR17X20X205 INA 2x NKI70/25-XL INA 2x NKXR40 INA 1x NX20-XL INA 2x PBS17 INA 6x RSTO45X INA 1x 4T-3782 NTN 10x JTU518 SNR 19x SC611SV SNR 2x 2202 NSK 2x NJ315ET C3 NSK 3x LRT152012 IKO and more
Drilling and milling machine with - Variable spindle speed - Cross support - Rotatable spindle head left/right 90° - Feed via hand crank Drilling capacity in steel 16 mm Projection 185 mm Drilling stroke 50 mm Capacity finger tiller 20 mm Spindle Holder MK 2 Spindle speeds 100-1500 / 200-3 rpm Table adjustment transverse 175 mm Table adjustment longitudinal 280 mm Table clamping area 500 x 180 mm Connection voltage 230 V Total power requirement 0.85 kW Machine weight approx. 0.12 t Space requirement approx. 0.86 x 0.6 x 0.9 m Condition: never used / new (5)
IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...
Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...
maximum number of results exceeded
please refine your search
