cooking kettles and used for sale

Batch of 5TI Sequencers and industrial modules Condition: Used Auction-ID: A1-46070-169

Batch of pneumatic cylinders and SMC parts Auction-ID: A1-46070-195

FAG, SKF and SNFA - Batch of industrial bearings 282KG including super precision bearings Auction-ID: A1-46070-296

70x VKBA3501 SKF 11x VKBA625 SKF 1x VKJC3548 SKF 3x VKJC3960 SKF 13x VKPC84215 SKF 715x OW-4230-825D INA and more Auction-ID: A1-46070-50

Lincoln - Batch AirCare combination units and stub pump tubes Auction-ID: A1-46070-31

MTK+, ISB, HIWIN - Batch of industrial bearings and linear components Auction-ID: A1-46070-234

FAG / SKF / Dodge - Batch of various bearings and bearing housings 86KG Auction-ID: A1-46070-184

SKF - VKPC 83259 CL - Batch of water pumps Auction-ID: A1-46070-163

Schaeffler / SKF - Batch of industrial components with grease & lubrication units 190KG Auction-ID: A1-46070-128

4x 1028991 SKF 8x 1204K/C3 SKF 6x 2205K SKF 24x 2300 SKF 6x 3311N SKF 2x ASNA612V SKF 4x CR70X95X10HMS4V SKF 1x FYKC35NTR/VE495 SKF 1x KRVE72PPA SKF 1x N313MB SKF 1x NU220ECMA/C3 SKF 2x OS43860 SKF 27x ZW12X17 SKF 5x 21311-E1-K-TVPB-C3 FAG 16x 546114A FAG 4x 803138.H83 FAG 1x DH506 FAG 1x NJ226E. M1. F1795124 FAG 8x RNAO50X62X20ASR1 FAG 2x 121 INA 11x F-23615 INA 28x F-45948 INA 1x GG. CJ03 INA 29x IR45X52X23-IS1 INA 1x RNA6903-H-XL INA 1x RNA6903 INA 2x N310 NTN 2x NU406C3 NTN 1x PF208 NTN 5x RNA-NA6908R NTN 5x T211D1 NTN 5x 7218H G1 U J74 SNR 1x 1318 NSK 2x L44649R/610RNES4C NSK 2x 21308K C3 RHP 1x 7019X3 TA UM EP7 RHP 36x ACS0506-2FY Koyo 1x RNA4822 Koyo 49x SBPFL201 Koyo 1x 22208KCJW33 Torrington 2x NJ2204ET Torrington 1x NK70/35ASR1 Torrington 5x NUTR45 Torrington 8x 306806C.2Z NKE 4x NKIS20 NKE and more Auction-ID: A1-46070-13

Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version. Auction-ID: A1-46315-52

SKF - Batch of automotive parts - drive shafts, bearings and pumps 135KG Auction-ID: A1-46070-131

Batch of heavy duty bearings and metal housings 363KG Auction-ID: A1-46070-280

Batch of abrasives Condition: unused Weight: 32KG net Auction-ID: A1-46070-133

OMES CEU 13 punching-shearing machine ; Eccentric machine with foot control; with punches ; suitable for cutting and punching work in steel ; Voltage: 380 volts ; Cutting capacity: 80 x 14 mm steel ; Solid round: 32 mm steel ; Punching capacity: 25 mm in 13 mm thick steel Auction-ID: A1-45170-42

Restoration project – Lamborghini Espada S2 (1972) A lot corresponding to the classic Lamborghini Espada S2 vehicle is offered, consisting of a restored chassis and various body elements. The chassis has been restored , which forms a solid basis for the rebuilding of the vehicle. The rest of the components are in a used and partially incomplete state, as shown in the photographs. Important note: The engine is not included in this lot. This is an excellent opportunity for collectors or professionals in the classic vehicle sector, aimed at a complete restoration project or use as a source of parts. Status: Material used. Chassis restored. Other components unverified. Possible incompleteness. Additional Information: Untested operating conditions. On-site inspection is recommended. Terms of Sale: Sold in the \"as is\" condition, without warranty or claim.  ...

SKF, FAG, INA - Batch of industrial bearings and components 190KG Auction-ID: A1-46070-230

Schneider Electric - Batch of installation materials, emergency lighting and data cabling & electronics Auction-ID: A1-46070-33

Batch of galvanized steel brackets, clamps and mounting plates (453KG) Weight: 453KG net Auction-ID: A1-46070-295

1x 24130CCK30/W33 SKF 80x 39433 SKF 96x BA2B445469BA SKF 2x TSN613GE SKF 24x F213 FAG 18x FG56210.114 FAG 20x HJ2320 FAG 132x F-110488 INA 4x F-110488 INA and more Auction-ID: A1-46070-67

Endress + Hauser - Batch of various flow meters and pneumatic components Auction-ID: A1-46070-47

Cooper / SKF - Batch of industrial bearing housings and bearing components 343KG Auction-ID: A1-46070-187

FAG, Gates - Batch of industrial and drive parts 67KG Auction-ID: A1-46070-284

HFH, HIWIN, KG, URB, JNS, ISB, - Batch of various bearings and bearing components 221KG Auction-ID: A1-46070-319

FAG, SKF, NSK - Batch of bearings and bearing housings 298KG Auction-ID: A1-46070-303

Batch of mixed industrial electronics and components Auction-ID: A1-46070-19

Schneider Electric - Batch of switching and installation material & electronics Auction-ID: A1-46070-8

SKF, FAG, Torrington - Batch of industrial bearings and seals Auction-ID: A1-46070-251

NTN, SKF, NSK, Torrington - Batch of industrial bearings and bearing blocks Auction-ID: A1-46070-289

Toprol - Batch of industrial bearings and bearing blocks 187KG Condition: unused Auction-ID: A1-46070-147

19x 6207-RS1/MT33BR196 SKF 1106x BB1-0219CA SKF 120x WC87504 SKF 50x 212.2ZN FAG 1000x 535697D FAG 200x 543664.C3 FAG 97x 549172 FAG 200x 6200ZNR FAG 111x 6303RSR. C3 FAG 54x 6307E. TVH. C4 FAG 14x EC-6901ZZ C3/2A NTN 580x 6000T1X Z CM NSK 23x 6206RS C4 Koyo 50x 6213Z NR C3 Koyo and more Auction-ID: A1-46070-65

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Root End Reducer B&Z Type WRP SO Well-preserved fully functional root end reducer made by Baljer and Zembrod. Built in 2004. Complete with control, disposal scraper conveyor straight approx. 8.0 m and ascending approx. 6.0 m. Including hydraulic log ejector. The hydraulic power unit with 15 kW is included in the scope of delivery, we also have the remote control for the control of e.g. sorting trolleys. Complete steel substructure. Length of milling shaft 1,380 mm. Drive of milling shaft with 75 KW motor. Feed motor slewing gear with 4.5 kW. Drive scraper conveyor with 3.0 kW.

Groninger plastic bottle filling & capping line comprising ZSB 2000 empty bottle unscrambler, DFV 10005Q in-line filling machine with 10 filling stations with cross-feed function, dosing range of 5 to 1000 ml, bottle height from 30 to 250 mm, transport cup dimensions (pucks) 108 x 80 mm and KVK 106 rotary capping machine with 6 capping stations with ZSK 1500 cap sorter and a lift-off conveyor for the transport cups (pucks), capacity up to 150 bottles per minute

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Working area: 1800 x 1000mm; dimension machine: 2600 x 2100 x 1200mm; automatic material feeder dimension: 2700 x 1200 x 1500mm; Auction-ID: A7-45992-140

2 packs Rock cupels with all. retinato diam. 140 mm th. 30 mm MTL 7; 1 pack diam. 160 mm th. 30 mm MTL 7; + 3 pcs various sizes - - Footboard 80 x 120 x H100 Auction-ID: A7-46421-36

Measuring and scribing tools Lot of 13 pieces With ATORN, Mitutoyo, PREISSER and othersMixed lot of 13 measuring and scribing tools for workshops, toolmaking and quality control. Included are a ATORN hair ruler 500 mm DIN 874/0 INOX, a Mitutoyo caliper 150 mm, a U-screw gauge with adjustment bracket, several precision angles as well as scribing tools and gauges. Auction-ID: A7-46417-294

Lots of industrial drills & modular systems (Sandvik, Kennametal) Mixed tool set of high-quality industrial drills: – several Sandvik WSP drills R411.5-27534 – Kennametal KSEM modules + interchangeable heads – various solid carbide twist drills Holex / Sandvik– large HSS/PM twist drills up to approx. Ø30 mm – reamers and special drills 1) Sandvik Coromant several WSP drills R411.5-27534, Ø ~27 mm, beam P20 various large twist drills 18–30 mm Single solid carbide drills in a yellow case Drills in the range 20–25 mm (coated, TiN/TiAlN) 2) Kennametal – SE-Drill Modular KSEM1983HPM – Ø19.83 mm KSEM1830HPM – Ø18.3 mm KSEM1100HPM – Ø11.0 mm several modules + interchangeable heads KC7235 modular holders (2 pieces) 3) Holex solid carbide twist drill bit 122310 19.5 mm other solid carbide twist drills 17–20 mm 4) Other tools Indexable insert drills (with mounted  ...

2× Machine vise BB 120 and 90 mm     •    Design: machine vice     •    Adjustment: manual, degree scale available (with a vice)     •    1× jaw width approx. 120 mm     •    1× jaw width approx. 90 mm     •     Solid cast/steel construction     •    Manual spindle actuation Auction-ID: A7-46417-107

Manufacturer: Mitutoyo Type / Model: Digital measurement setup with Digimatic dial gauge ID-C150B Manufacturer's specifications dial gauge • Model: ID-C150B • Code no.: 543-460B • Measuring range: 0 – 50.8 mm • Resolution: 0.001 mm • Measuring system: Absolute (ABS / INC) • Display: Digital • Data output: Digimatic • Power supply: Battery (button cell, inserted) • Country of manufacture: Japan Measuring setup / scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Precision measuring stand with cross arm • Mitutoyo Digimatic mini processor / printer DP-1VR • Granite measuring plate (integral part of the device) • Foot switch • Connection cable • Mitutoyo mini processor / printer DP-1VR (incl. connection cable) Technical data granite plate • Material: granite • Size: approx. 400 × 400 × 60 mm (L × W × H) • Solid design • Flatness clas ...

\" Heavy workbench 2000 x 700 mm with 6 drawers and cabinet and Sandvik Coromant Capto C6 clamping block / pick-up block type: 391.530-C6 Use: For securely holding and fixing Coromant Capto C6 tool holders (e.g. for presetting, storage or workbench mounting). Stable industrial workbench with solid wooden worktop. Design: • 1-door base cabinet left • 6 drawers right (3 + 3) • Sheet steel body • Solid wood worktop Dimensions: 2000 x 700 x 860 mm Condition: Used with clear signs of use. Worktop with pressure marks, scratches and wear on the edges. drawers functional. Without content and without keys. Overall dimensions: approx. 2000 x 700 x 860 mm (L x D x H) Type: Steel substructure with wooden top Colour: Body light grey / Front turquoise \" Auction-ID: A7-46417-376

4 pack insulation pipe K-FLEX 25-089 AL CLAD; 1 K-FLEX EC/1.10 insulating tube box - Packages may not be complete - Footboard 80 x 120 x H180 Auction-ID: A7-46421-33

Mitutoyo digital measuring system consisting of an ABSOLUTE digital dial gauge ID-C112B, mounted on a measuring stand with granite top, including Digimatic mini processor DP-1VR with integrated print function. The system is intended for precise measuring, comparison and testing tasks in the measurement and quality sector. The granite slab is part of the measurement setup and is included in the scope of delivery. Condition • Used Scope of Delivery • Mitutoyo Digital Dial Gauge ID-C112B • Measuring Stand • Granite Slab (300 × 200 × 50 mm) • Digimatic Mini Processor DP-1VR with Push Function • Connection Cable Digital Dial Gauge • Manufacturer: Mitutoyo • Model: ID-C112B (ABSOLUTE) • Code: 543-250B • Measuring Range: 0 – 12.7 mm • Resolution: 0.001 mm • Measuring System: Absolute Measuring System (ABS) • Display: Digital • Data Interface: Mitutoyo Digimatic ...

\" Mixed lot of measuring screws and measuring equipment – 5-part – mechanical – special designs – used 5-part bundle of mechanical measuring equipment, consisting of shackle measuring screws and special/special measuring screws (including with a large round scale). • Type: mechanical measuring screws / special measuring screws • Reading: usually 0.01 mm • Measuring ranges: mixed (e.g. 5–30 mm, see pictures for other ranges) • Design: \"Metric \" Auction-ID: A7-46417-221

Stock 8 pcs: 4x FWXT20ABTV3 + 4x FWXT15ABTV3 - - 125 x 90 x H110 cm Auction-ID: A7-46421-8

2x boxes; Blue tube for air and brake fluid Auction-ID: A7-45992-146

\" Mitutoyo Digital Dial Gauge ID-C150B with Measuring Stand and Granite Measuring Plate Digital dial gauge from Mitutoyo with associated measuring stand and granite measuring plate. The unit is set up as a complete measuring station and is delivered together. • Used • Dial gauge can be switched on, display available • No calibration or measurement test carried out • Mechanical parts movable • Optical traces of wear present Scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Measuring stand with bracket • Granite measuring plate Digital dial gauge • Manufacturer: Mitutoyo • Model: ID-C150B • Code no.: 543-460B • Measuring range: 50.8 mm • Resolution: 0.001 mm • Display: Digital • Functions: Zero/ABS, Preset, mm • Origin: Made in Japan Measuring stand • Mechanical measuring stand with round column • Height adjustment via clamping • Side boom f ...