cooking kettles and used for sale

This plant is a small scale Cheese Facility that consists :, SMI Packer, 2 x Vacuum Cheese Packer, Cheese Cutter, Butter Churn 100 litres, Pasteuriser for 1000 litres per hour, Lobe Pump, Cheese Press, Work Tables Stainless steel, Cheese moulds, Cheese Vat with Planetary Cutters, Cheese Tables, Cheese Shelf’s, Fridges, Sale Point Fridges, The plant is sold as seen in good condition, contact us for a quote for this plant .

2x 6 niveaus capaciteit van één niveau: 552 kg lengte: 5000 mm breedte: 1800 mm hoogte: 2550 mm (zonder inhoud)

Machine is in good working condition. Parts shown by hand not come.

Additional knives will come with machine.

WOLF Seydelmann AE 130 3.

WOLF Seydelmann AE 130 3.

bore capacity in steel (diameter): 13,0 mm x-travel: 300 mm y-travel: 130 mm turning speeds: 100 - 2500 U/min throat: 165 mm spindle taper MT: 3 MK table-size: 490 x 120 mm diameter of hob: 30,0 mm motor: 230 Volt total power requirement: 0,75 kW weight of the machine ca.: 50 kg. dimensions of the machine ca.: 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mm throat: 260 mm distance between roll centers: 92.0 mm weight: 295 kg range L-W-H: 1200 x 700 x 1200 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm throat: 260 mm distance between roll centers: 132 mm stroke: 55.0 OW mm tool adaptor: Ø 35 mm, 12 mm Nut mm total power requirement: 3.0 kW weight of the machine ca.: 450 kg. range L-W-H: 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation The data fo ...

plate thickness: 1.20 mm throat: 270 (140) mm distance between roll centers: 60.0 mm total power requirement: manuell kW weight of the machine ca.: 46.0 kg dimensions of the machine ca.: 600 x 250 x 500 mm Furnishing: - various replacement rollers - hand crank - front stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Net weight= 31 kg,

Machine is in good working condition.

300 lit, good condition

Machine is in good condition.

A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible.

A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.

Laska Bowl Cutter KU 80 litres, with black bowl, in function

Vemag servo crimper in very good condition incl. accessories

Annpona Cutter PB 125-990, with Black Bowl, in Function

Foils and tarpaulin welding device Welding length up to 2500 mm

Set of 4 Gravimetric Feeders: - Brand: Maguire - Model: WSB-960T. - Made of 6 materials each - Year: 2006 - With electrical panel

Spindle and jacket for extruder. - Brand: COVEX - 90 diam. x 2300 - 25 L/D Spindle length with resistors

GEA-INTEDAS vertical tank made of AISI 304L stainless steel. On legs. Capacity: 6000l. 4 lower outputs and 1 upper entrance. With aeration valve and top manhole cover. Atmospheric. Design temperature: 90º. Previous use: mains water. Series No.: 10D100. Dimensions: Diameter: 1500mm. Height 5280mm.

Vertical tank made of stainless steel. On legs. Capacity: 20,000 l. With side overflow and 2 lower outlets. Previous use: Mains water. Series No.: 50D100. Dimensions: Diameter: 2600 mm. Height: 5220 mm.

Elements: Double-sided grinding machine 2500 C4/0E. General equipment per machine: motorized width adjustment with automatic positioning, coolant pump for coolant recirculation, 1x solenoid valve for water supply, manual glass thickness adjustment, transport belts with Low-E kit. Automatic destacking of large glass formats (6000x3210mm) from main production, which are then cut into corresponding individual panes. Further processing: individual panes can be flexibly processed further (cutting, grinding, drilling). Cleaning: afterwards the panes pass through an industrial washing and drying unit. Quality control: after cleaning, an automatic quality control is carried out using a scanner. Tempering process (ESG): panes can be fully automatically destacked or optionally passed through a tempering furnace. In the furnace, the glass is heated to approx. 600°C and then cooled to produce tempe ...

Vertical tank made of stainless steel. On legs. Capacity: 15,000 l. Heat-insulated lining. 2 Entrances, top and bottom. Top manhole cover. Previous use of recovered hot water. N. Serei: 10TA200. Dimensions: Diameter: 2500mm. Height: 4860 mm.

Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault desp ...

Vertical tank made of stainless steel. On the basis of E. BACHILLER. With railings. Capacity: 30,000 l. Previous use: Milk. Atmospheric. Series No.: 10D700. Dimensions: Diameter: 2700 mm. Height: 7500 mm. Base 1060 mm. Weight: 3360 kg. available

Pester PEWO-fold 1 Compact overwrapping machine for single cartons and carton collations in OPP-, PVC-, PE-materials, foil width from 90 mm to 230 mm, film thickness from 0.015 mm to 0.050 mm, maximum reell diameter 350 mm, reel core diameter 76 mm, size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, carton infeed with turning star (turns the cartons by 90°), machine controlled using ELAU PacDrive C400, electrical connection 3x400V, V+N+PE/50Hz, power consumption 5.2 kW, current consumption 12.5 A, Operating pressure 4 bar, infeed/outfeed height approx. 900-950 mm, output infeed conveyor up to 150 cartons/min., output up to 60 cycles/collations per minute, machine floor space approx. 2970 x 1600 mm (LxW), machine height approx. 2150 mm, machine net weight approx. 1800 kg.

Vertical tank made of AISI 304L stainless steel. Manufacturer: CALDERINOX. On legs. Capacity: 40,000 l. Top and bottom entrances. Mineral wool insulation. Atmospheric. Design temperature: 85º. Use

Vacuum cutter Alpina Swopper Sw V 330 S

ALPINA TIPPER TIE SW 330 CUTTER AS NEW

Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.


Universal tool milling machine TOS FNGJ 32 3 Axis Heidenhain Digital Display Year of Make: 1999 Travel: X 600 Y 400 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 800 x 400 mm clamping surface Vertical milling head Extendable drill quill Various tool holders SK 40 Safeguard Chip tray Machine Light Automatic central lubrication pump for X,Y,Z axis Coolant Setup 4 pcs machine shoes

Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Year of construction 2000 Inclusive Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates

Key data: 250 KW

MAN gas engine is available with very low hours. Type: E2842E312 Scope of supply: CHP Gas line Control Panel Exhaust gas cooler Enclosed silenced container

Seiko Epson Model LS6-B602S Scara Year of construction 10/2019 Weight 17 kg Max. handling weight 6 kg Equipped with Schunk gripper in very good condition Immediately available from stock.

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Key data: 165 mm, 330 mm, 2800 U/min

WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!

Width 34 cm Year of construction 2000 electric punching and binding machine Electric Punching - Manual Tying Split 3:1 Table model Delivery date: short-term Price on request. We supply and install worldwide.

Make: Colchester Type / Model: Student Center width: 500 mm Passage: 42 mm Tip height: 175 mm Turning diameter over bed: 350 mm over slides: 200 mm Speed range: 34 to 1,500 mm Feed lengthwise: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: Steel holder, 3-jaw chuck, 4 jaw chucks, steel bracket Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm

Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display

Glass and drying plant Lisec type VHW-20/6 Specifications: • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear

Bread slicer MHS creel BM 45 N Creel cutting machine floor model Model: MHS BM 45 N with crumb drawer at the bottom Machine mobile Connection 220V Used machine cleaned Option: Leasing & Rental Service Maintenance contract Delivery Instruction & Commissioning

1 Pc Used Single Column Carousel Lathe Make STANKO Mod. 1514 Bauj. 1988 Face plate diameter 1400 mm Circumferential diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 3Stages 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810T 1 pc. used two-stand vertical lathe Brand STANKO Mod. 1514 year of construction 1988 Face plate diameter 1400 mm Swing diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810 T

Ultrasonic Banding Machine ATS US 2100 AB; tested and maintained by ATS Germany support; Belt width 75mm; Frame 430x205mm; 2-fold print mark control for printed material; fixed strap length adjustable; Arc air; suitable for paper or foil. Ultra sonic banding machine ATS US 2100 AB; checked by the support of ATS Germany; band width 75mm; frame 430x205mm; Double Print Mark Reader; fix band lenght possible; airing for the frame; used for paper or foil.

• Output approx. 40 cycles/min. • 2 filling hoppers, manual product feeding • 2 vibrating pots • Robot Mitsubishi RH-3SDHR, max. load 3 kg • Vacuum gripper • Product transfer, e.g. into blister cavities of a blister machine, by inserting the product transfer area of a blister machine into the machine. • HMI programme control with touch screen • Drive 220V/50Hz This machine is offered at a special price and sold as-is without technical inspection.

Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.

Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Inclusive Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates Documents available

WITH TRIMMER p/n: 2654000N SN: 060900759 Format: up to SRA